穂高電子 List of Products and Services

We would like to introduce a case where we proposed a drug flow control device for medical devices to a medical device manufacturing company. The company requested the development of circuit design, firmware, and applications for a device that sets the drug flow rate from a panel while measuring various sensor information and controlling a motor. We proposed and delivered a device that enhances visibility using a color LCD, controls the motor while measuring weight sensors and drip sensors, and considers safety with ultrasonic sensors, strain sensors, gyro sensors, and light sensors. 【Case Overview】 ■ Request - Circuit design, firmware, and application for a motor-controlled device ■ Proposal - Enhance visibility using a color LCD - Control the motor while measuring weight sensors and drip sensors - A device that considers safety with ultrasonic sensors, strain sensors, gyro sensors, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Flow Control

We would like to introduce a case where we proposed a sensing display device using Bluetooth V4.0 LE communication to a major electronics manufacturer. The company requested to display measurement information from temperature sensors and acceleration sensors on a tablet PC. In response, we proposed an application with a low-power circuit configuration using a BLT LE module, which includes setting functions, single display of sensor information, graph measurement display, and history saving features on the tablet PC. We delivered a system that implements sensors on a flexible circuit board, communicating with the tablet PC via BLE v4.0 LE to display the measured sensing information. [Case Overview (Partial)] ■ Request: Display measurement information from temperature sensors and acceleration sensors on a tablet PC ■ Proposal: - Low-power circuit configuration using a BLT LE module - Application with history saving features on the tablet PC *For more details, please refer to the PDF document or feel free to contact us.

• Instrumentation and Control Systems

We would like to introduce a case study of our proposal for surface roughness measurement to a measurement equipment manufacturer. The company expressed a desire to measure surface roughness using a laser displacement sensor, as well as to confirm roughness parameters (Rz, Ry, Sm) and save measurement data while transporting the measurement equipment. We proposed a device that scans the measurement surface using a combination of a motor, encoder, and slider, along with a data analysis device created from a general-purpose RX microcontroller board, a general-purpose case, and an LCD. A prototype has been delivered and is currently in use. [Case Overview (Partial)] ■Requirements - To measure surface roughness using a laser displacement sensor - To confirm roughness parameters (Rz, Ry, Sm) while transporting the measurement equipment - To save measurement data *For more details, please refer to the PDF document or feel free to contact us.

• Other analyses

We would like to introduce a case where we delivered an ink droplet image inspection device to an inkjet printer development manufacturer. They requested to investigate the ejection speed, spacing, curvature, and ink volume of the ink droplets ejected from the ink head. We proposed to synchronize a high-resolution camera and a strobe light with the ink head ejection, capturing data from the camera images to a PC for image processing, allowing us to inspect the ejection state of the ink. We requested a cooperating manufacturer to produce the inspection stage, fixtures, and electrical components, while using commercially available cameras and strobes. We designed the circuit board for ink head ejection, developed the FPGA design, and created the application for the PC, which we then delivered. [Case Overview (Partial)] ■ Request: To investigate the ejection speed, spacing, curvature, and ink volume of the ink droplets ■ Proposal: - Synchronize a high-resolution camera and strobe light, capturing data from the camera images to the PC for image processing. *For more details, please refer to the PDF document or feel free to contact us.

• Other image-related equipment

To the servo module development manufacturers, we would like to introduce a case of developing a servo inspection device. The company expressed a need for accurate measurement of servo control characteristics to ensure quality, as the performance inspection of servo products before shipment was taking time due to the lack of established methods, and the products are mounted on the customer's expensive machinery. Therefore, we proposed a customization of our servo analyzer "quattro system." It was developed and delivered as a unique measurement inspection device for the customer. [Case Overview] ■ Request: To accurately measure servo control characteristics to ensure quality ■ Proposal: Customization of our servo analyzer "quattro system" ■ Results: - Developed and delivered as a unique measurement inspection device for the customer - Reduced inspection time and improved quality assurance, which pleased the customer *For more details, please refer to the PDF document or feel free to contact us.

• Servo

We would like to introduce a case of developing an LED display section for a manufacturer of inspection equipment. The company was facing difficulties because the LED driver IC mounted on the LED control board of their existing product became unavailable, and they requested a proposal for a successor model. In response, we proposed LED control using a PIC microcontroller. We developed the design for the LED driver peripheral circuit and the microcontroller firmware, and delivered a prototype in the form of a universal board. We are currently also proposing for the request to create a printed circuit board. [Case Overview (Partial)] ■ Request - Since the LED driver IC has become unavailable, they wanted a proposal for a successor model. ■ Proposal: LED control using a PIC microcontroller ■ Effects - By using microcontroller control, various blinking controls for the LED become possible. - It can also incorporate control of peripheral devices, thus improving versatility. *For more details, please refer to the PDF document or feel free to contact us.

• Other process controls

We would like to introduce a case study of board development for writing control device information to an SD card for a control device manufacturer. There was a board that wrote control device information to a CF card, and there was a request to change the CF card to an SD card or USB memory, as well as to reduce manufacturing costs and make it more compact compared to the current board. We proposed that by using a control IC that does not require a license and switching to a low-cost, compact microcontroller, it would be possible to lower the overall cost. We developed and delivered a board and firmware using Renesas Electronics' RX microcontroller and a control IC for SD cards, along with an evaluation application using Microtechnica's ALFAT-C. [Case Overview (Partial)] ■ Requests - Change the control device's CF card to an SD card or USB memory - Reduce manufacturing costs and make it more compact *For more details, please refer to the PDF document or feel free to contact us.

• Circuit board design and manufacturing

We would like to introduce a case where we delivered a mouse emulation system to a display manufacturer. The company requested whether we could develop an FPGA program for an FPGA-equipped board and a LabVIEW program that communicates with the FPGA-equipped board via USB to execute mouse emulation on a PC. Our company has a proven track record in FPGA development, and we have a specialized partner who excels in LabVIEW programming. In this case, the client has expressed satisfaction after delivery. [Case Overview] ■ Request - Development of an FPGA program for an FPGA-equipped board and a LabVIEW program ■ Our Strengths - Proven track record in FPGA development - Specialized partner for LabVIEW programming ■ Result: The client is satisfied after delivery *For more details, please refer to the PDF document or feel free to contact us.

• Other embedded systems (software and hardware)

We would like to introduce a case study of the development of a flow sensor control system for medical applications, aimed at manufacturers of pneumatic, hydraulic, and fluid control equipment. The company was looking for an outsourcing partner capable of conducting a software development process compliant with the quality management system for medical devices in the development of flow sensor control systems for medical equipment. As a result, we are currently developing the system based on the client's requirements and specifications, following a development process compliant with the quality management system. We have delivered the first prototype and are currently developing the second prototype. 【Case Overview】 ■ Request - An outsourcing partner capable of conducting a software development process compliant with the quality management system for medical devices. ■ Result - Currently developing the system following a development process compliant with the quality management system. - Delivered the first prototype and are currently developing the second prototype. *For more details, please refer to the PDF document or feel free to contact us.

• Flow Control

We would like to introduce a case of prototype development of a voice input/output device using DSP for electronic component manufacturers. The company is collaborating with a university to prototype a product that extracts the desired voice while removing noise. However, they requested assistance with circuit design and software design due to a lack of know-how. We proposed to develop the base part of the voice input/output function and provide a mechanism for the customer to implement the noise removal algorithm later. We manufactured a prototype board using TI's DSP and delivered it with the voice input/output function implemented. [Case Overview (Partial)] ■ Request - Circuit design and software design for a product prototype that extracts the desired voice ■ Proposal - Our company will develop the base part of the voice input/output function - Provide a mechanism for the customer to implement the noise removal algorithm later *For more details, please refer to the PDF document or feel free to contact us.

• Voice Recognition Software

We would like to introduce a case of developing a teaching pendant for robots for manufacturers involved in the design, development, manufacturing, and sales of robots. The company requested the development of firmware for the teaching pendant of an LCD transport robot. Although the language for the teaching pendant was developed independently and we had no prior experience with it, we responded that we could handle it due to our ample experience in screen rendering and proven track record in motor control, and we completed the development and delivered it without delay. [Case Overview] ■ Request - Development of firmware for the teaching pendant of the LCD transport robot - No specifications provided, but they wanted it completed based solely on meetings ■ Result - Faced challenges in software development for the teaching pendant but completed the development without delay *For more details, please refer to the PDF document or feel free to contact us.

• Other embedded systems (software and hardware)

We would like to introduce a case of developing microcontroller peripheral device drivers for a substrate design and manufacturing company. The company requested drivers for peripheral devices of the SH2A microcontroller and inquired whether the control routines for these peripheral devices could be turned into a library. In response, we designed and delivered a driver library for the SH2A microcontroller peripherals. The library supports devices such as LAN, GPS, cameras, gyroscopes, and memory access, and we also provided the I/F specifications for the library. [Case Overview (Partial)] ■ Request - Need for drivers for peripheral devices of the SH2A microcontroller - Inquiry about turning peripheral device control routines into a library ■ Result - Designed and delivered a driver library for SH2A microcontroller peripherals *For more details, please refer to the PDF document or feel free to contact us.

• Software (middle, driver, security, etc.)

We would like to introduce a case where we delivered a multi-channel electrode control system to a display-related manufacturer. They requested the development of an electrode control unit that transmits information from 600 electrodes to a PC application. We proposed redesigning the FPGA for multi-channel electrode control, redesigning various control boards to meet size requirements, and providing design and manufacturing for harnesses and enclosures. We completed the assembly by enclosing the various control boards in the enclosure and conducting coupling tests, and we also completed system testing through on-site adjustments. The delivery was made in the form of an electrode control unit. [Case Overview (Partial)] ■ Request - Development of an electrode control unit that transmits information from 600 electrodes to a PC application. ■ Proposal: Aim for cost reduction while maximizing the use of existing assets. - Redesign FPGA for multi-channel electrode control. - Redesign various control boards to meet size requirements. - Design and manufacturing of harnesses and enclosures are possible. *For more details, please refer to the PDF document or feel free to contact us.

• Control Panel

We would like to introduce a case of developing servo control for a swivel base for a major home appliance manufacturer. The company was struggling with the inability to measure the servo characteristics of intermittent pan/tilt movements and requested both servo control and control characteristic measurement. In response, we undertook the creation of an evaluation board, servo design, behavior measurement, and servo characteristic measurement as a comprehensive package and delivered it. Our servo analyzer can measure intermittent operations. We have a proven track record in servo control development, so you can trust us with this task. [Case Overview (Partial)] ■ Request - Is it possible to measure the servo characteristics of intermittent pan/tilt movements? - We would like to request both servo control and control characteristic measurement. ■ Proposal: Conduct a demo of intermittent operation. *For more details, please refer to the PDF document or feel free to contact us.

• Other process controls

We would like to introduce a case study of the development of a servo control board for a charging and discharging device for an electrochemical equipment manufacturer. The company faced challenges with the current charging and discharging device, which uses a dropper method, in terms of reducing thermal loss and energy efficiency, and wanted to digitize the servo control board. Our company has extensive experience in developing digital PID (servo) control systems. We proposed to digitize the control of the dropper-type charging and discharging device, achieving reduced thermal loss and improved energy efficiency. [Case Overview (Partial)] ■ Request: To digitize the servo control board ■ Proposal: To digitally control the dropper-type charging and discharging device ■ Result: Achieved reduced thermal loss and improved energy efficiency *For more details, please refer to the PDF document or feel free to contact us.

• Circuit board design and manufacturing

We would like to introduce a case study of a three-phase brushless motor control system that we developed for an automotive-related manufacturer. The company wanted to create a test system for motor drive devices and requested the realization of three-phase brushless motor control with sinusoidal wave drive, while also aiming for a compact test system. We designed and delivered the enclosure, circuit board, wiring, and control software for the three-phase brushless motor control system. It has been used in the prototype development of an electric brake, and they are very satisfied with it. [Case Overview (Partial)] ■Requirements - To create a test system for motor drive devices - To realize three-phase brushless motor control with sinusoidal wave drive - To make the test system as compact as possible *For more details, please refer to the PDF document or feel free to contact us.

• Control Panel

We would like to introduce our company's "Display Measurement Service" by Aphrodite. We provide the "technology" and "measuring tools" for physical phenomena such as contrast, chromaticity, brightness, resolution, reflection, three-dimensionality, noise, and motion characteristics. We offer a menu of services for equipment purchase considerations and measurement requests. Please feel free to contact us if you have any inquiries. 【Measurement Systems】 ■ Glare Optical Evaluation System "SMS-1000" ■ Spatial Resolution Evaluation System "DT-8031" ■ Optical Characteristics Evaluation System "DMS Series" *For more details, please refer to the PDF document or feel free to contact us.

• Contract measurement

The "SMS-1000" is a quantitative evaluation and optical characteristic system for measuring display glare. It can be used for research and development and quality assurance of anti-glare displays. All types of displays, including LCD and organic EL displays, can be measured. 【Features】 ■ No need to set conditions for each sample ■ Usable for research and development and quality assurance of anti-glare displays ■ Can measure low glare levels with high accuracy ■ Glare measurement method: JIS standard compliant *For more details, please refer to the PDF document or feel free to contact us.

• Optical Measuring Instruments

"pengu" is a business improvement service that comes with a set of business automation tools and a training program. We provide a powerful business automation tool along with a training program that enables you (the on-site personnel) to use it autonomously. You will be able to easily automate your tasks by yourself. 【Features】 ■ A set of three business automation tools (OCR/ETL/RPA) ■ All three tools are designed for ease of use and require no programming ■ A completely one-on-one "personalized training program" by a coach-type system engineer *For more details, please refer to the PDF document or feel free to contact us.

• Other contract services

The "MR-NVT340" is a compact and lightweight IoT gateway product suitable for system integration. It has built-in antennas for LTE connectivity and wireless LAN, and it can also switch to an external antenna for LTE connectivity (optional) according to the installation environment. It includes a communication module compatible with SIM cards from major telecom carriers as well as MVNO operators, and it is equipped with one wired LAN port (10/100Mbps). 【Features】 ■ Compact and lightweight ■ Supports 2.4GHz wireless LAN ■ Functions for stable operation ■ Built-in communication module ■ Equipped with a wired LAN port ■ Customization requests for hardware, firmware, etc. can be accommodated *For more details, please refer to the PDF document or feel free to contact us.

• Communications

We would like to introduce the industrial compact USB camera "Mileva MS-311" from Ichiwa that we handle. It boasts a cable bend radius of 11.5mm, providing flexibility, and achieves clearer images with an S-mount lens. Additionally, the dedicated ViewerSoft includes features such as video live view, pixel size switching, and exposure time control. 【Features】 ■ Clearer images with an S-mount lens ■ Flexibility with a cable bend radius of 11.5mm ■ Capable of high frame rate shooting *For more details, please refer to the PDF document or feel free to contact us.

• Color camera

"I-TAS" is a general-purpose automatic measurement software for measuring and adjusting audio/visual/communication-related products and circuit boards. It connects to various measuring instruments (e.g., audio analyzers, multimeters, oscilloscopes, etc.) for measurement. Measurement procedures can be customized by creating unique measurement programs, allowing you to set any measurement method or procedure. 【Features】 ■ No programming languages such as VB/C/C++/C# are required ■ You can construct measurement steps simply by selecting the specified settings with the mouse or entering them from the keyboard for each selected step ■ Since there is no need for compilation, you can debug the work state while constructing the steps *For more details, please refer to the PDF materials or feel free to contact us.

• Other measurement, recording and measuring instruments

Adopting the newly developed Line-based method established by the International Electrotechnical Commission (IEC). It allows for easy quantification of image blur levels. It enables quantitative evaluation of spatial resolution (spatial resolution assessment) for various displays, display devices, and materials/components. Real-time measurement is possible, offering high measurement accuracy and stability, and the measurement hardware can be achieved with inexpensive cameras and optical systems. Upon request, we can provide a complete system tailored for large displays or material/component evaluation in special specifications. We offer a consistent technical service from sample and demo evaluation to system sales and after-sales service. 【Display MTF Measurement Data】 ■ Evaluation of displays ■ Evaluation of display materials and components ■ Quality characteristic evaluation *For more details, please refer to the PDF document or feel free to contact us.

• Optical Measuring Instruments

"Ai-Glies" is an energy-saving system that contributes to our customers' efforts in decarbonization by reducing the power consumption of air conditioning and lowering CO2 emissions during power generation. It features energy-saving control that allows for approximately 3 minutes of air blowing within a 30-minute period, activated 0 to 3 times. The system automatically adjusts to changes in the discomfort index of the outside air, achieving precise control. The devices are connected via wireless communication, significantly reducing initial costs by minimizing wiring work and shortening the construction period during installation. [Features] ■ Reduces usage fees through partial operation of air conditioning while maintaining a comfortable indoor environment ■ Cuts peak demand values to lower basic fees ■ Reduces installation costs by connecting devices wirelessly ■ Visualizes CO2 emissions and reductions *For more details, please refer to the PDF document or feel free to contact us.

• Demand Monitoring

The "Data Validation Environment System" is a device that synchronously records in-vehicle camera footage, CAN signals, and LiDAR data onto a PC. The recorded footage and CAN/LiDAR data can be reproduced using our playback system, allowing for efficient verification and debugging of devices such as ECUs without the need for actual equipment. When saving in-vehicle network data, synchronization between the various data types is of utmost importance. However, thanks to our proprietary technology, we can record and playback multiple video streams along with CAN and LiDAR information in a fully synchronized state. 【Example Configuration】 ■ MIPI Monitor Board: SVM-06 ■ Image Recorder: SVI-09 ■ GMSL Deserializer Board: GMI-96706 ■ GMSL Input 4ch Deserializer Board: GMI-9286 ■ CAN Interface Board: CAN-ADP ■ LAN-IF Board: NV051 *For more details, please refer to the PDF document or feel free to contact us.

• Surveillance Camera System

The "Universal Inverter Driver" is a motor driver that enables the drive of various motors through a customizable functional configuration. We provide the motor drive systems that our customers need with short delivery times and cost efficiency. During customization, we respond to advanced requests with meticulous attention, and through detailed parameter settings, we have received high praise from professionals in motor drive. We also have a track record of using it in combination with the low-cost RCP DT-0009 from DSP Technology, which is compatible with MATLAB Simulink, making it recommended for developers promoting MBD. [Features] ■ Customizable functional design ■ Diverse functional units ■ Enables the drive of a wide variety of motors ■ Reduction of development costs and delivery times *For more details, please refer to the PDF materials or feel free to contact us.

• Stepping motor

The "Node Aα" is a doorless constant temperature and humidity chamber that allows for direct operation while observing the sample inside the chamber. It enables the insertion and removal of workpieces from the front without being affected by temperature changes inside the chamber that occur during door opening and closing. By using a fan to draw in outside air and circulate it around the exterior of the test chamber (air curtain), it suppresses the impact of outside air intrusion on the temperature and humidity inside the chamber. 【Features】 ■ Clear visibility ■ Two-handed sample insertion and removal ■ In-chamber operation is possible ■ Air curtain suppresses outside air intrusion ■ Gentle airflow inside the chamber ■ Wide range of settings available *For more details, please refer to the PDF document or feel free to contact us.

• Thermostatic chamber

The "small 3-axis force sensor" is a force sensor capable of measuring in three axes (Fx, Fy, Fz). It is calibrated and certified using a testing standard that has obtained national standard traceability. By creating individual interference correction coefficients based on the measurement data during calibration, it enables high-precision measurement in three axes. 【Applications】 ■ Sports equipment ■ Welfare devices ■ Robot development, etc. *For more details, please refer to the related links or feel free to contact us.

• Sensors

The "HapLog (Haptic Skill Logger)" is a measuring device that is worn on the finger. By attaching a sensor to the nail side of the finger, it allows for the measurement of finger pressure without compromising the sense of touch while exposing the fingerprint. It is applied in evaluating the pressure of cosmetic massages, the feel of pressing switches, and the ease of opening packages. 【Features】 - Enables measurement of gripping force while preserving the sense of touch. - Can be used for evaluating operational force, usability, and the effectiveness of education and rehabilitation. - Allows for quantitative evaluation by calibrating finger pressure with a 3-axis sensor, unaffected by the hardness of the human finger. *For more details, please refer to the related links or feel free to contact us.

• Sensors

The "force plate" is a measuring instrument with force sensors embedded in the four corners of the top plate. It can be used to analyze the biomechanics of sports movements and rehabilitation walking, the tire contact forces of vehicles, the skill transfer of delicate tasks performed by factory workers, and ultra-sensitive force plates can measure fine sensations, such as tracing a finger. Additionally, it can measure propulsion, vertical forces, and torque forces (6 components: Fx, Fy, Fz, Mx, My, Mz). 【Features】 ■ Manufactured by a reliable domestic company, each unit is thoroughly calibrated before shipment. ■ In addition to existing sizes and specifications, it can also accommodate custom specifications. *For more details, please refer to the related links or feel free to contact us.

• Torque Meter

"YAWASA" is a standard model that allows for the adjustment of the deformation amount and speed of the probe pressed into the object being measured, according to its condition. Combined with software that enables the reading of measured data and the modification of parameters to re-evaluate the Young's modulus, it is a system with high analytical capabilities. It is used for measuring the softness of various items such as skin, diapers, car seats, food, and packaging. 【Features】 ■ Measures a wide range of softness from the softness of egg yolks to that of silicone resin. ■ Can be used for measuring the softness of various items such as skin, diapers, car seats, food, and packaging. *For more details, please refer to the related links or feel free to contact us.

• Other measurement, recording and measuring instruments

The "Yubi Recorder" is a device that can measure tactile information by detecting vibrations generated on the skin while touching an object with the fingertips. The sensor is designed to be wrapped around the middle phalanx (between the first and second joints) of the finger, allowing for natural movement during use. By modulating the output from the sensor to frequencies that can be felt by humans through an equalizer, it is possible to present the tactile sensation to a third party via a vibrator. Additionally, the sensor amplifier with an equalizer has an analog output function, allowing for the measurement of vibration data detected by the sensor. 【Functions】 ■ Presents vibrations detected by the sensor ■ Detects skin vibrations generated by direct touch ■ Analog output of sensor signals ■ Adjusts the frequency of sensor signals ■ Inputs acquired sensor signals *For more details, please refer to the related links or feel free to contact us.

• Sensors

"BGA Pro" is software that identifies characteristic points of void areas in BGA balls from X-ray images and clearly displays the less visible void areas. By quantifying the void state of the BGA, it is possible to evaluate the soldering condition. Additionally, measuring the void state can be utilized as information for setting conditions such as reflow. 【Features】 ■ Calculates changes in image signals of BGA that are not visible in normal X-ray transmission images ■ Quantifies the state of solder balls based on the size of the voids and their position from the center ■ Assists in soldering evaluation *For more details, please refer to the related links or feel free to contact us.

• Image analysis software

"SMT Inspection Pro" is an inspection software that identifies differences from reference images in solder bridging and foreign objects after BGA mounting, as well as in shape inspection. It compares the same 2D image data of the sample being inspected against the position and brightness data of the good product's 2D perspective image as the original data. If there are differences in the image data, it marks the position with a caution sign as a bridge or foreign object. [Abnormal Detection Examples] ■ Solder Bridge Abnormality Detection ■ Solder Ball Defect Detection ■ Capacitor Position Abnormality Detection ■ Capacitor Defect Detection *For more details, please refer to the related links or feel free to contact us.

• Other inspection equipment and devices

"Reel Inspection Pro" is software that inspects the quantity and internal structure of small electronic components supplied on a reel. It captures a full view of the components wound on the reel from the side and inspects the interiors of each individual component. Each component on the screen is identified by its position within the screen. By synthesizing each screen, the positions of the components across the entire reel can be determined. [Application Examples] ■ 18cm reel number of parts inspection ■ 18cm reel wire shape inspection *For more details, please refer to the related links or feel free to contact us.

• Other inspection equipment and devices

"Wire Inspection Pro" is a technology that inspects the wire shapes inside IC chips using X-ray imaging and automatically determines defects such as wire bonding disconnections, shorts, and bends. By utilizing this technology, it is possible to automate the inspection of defects occurring inside ICs. Custom software can be developed based on the inspection object and inspection specifications. 【Features】 ■ By linking the developed wire inspection software with the X-ray inspection software (BSFM), automatic inspection of internal IC images is achieved. ■ Custom software can be developed based on the inspection object and inspection specifications. *For more details, please refer to the related links or feel free to contact us.

• Other inspection equipment and devices

We would like to introduce our "Total X-ray Inspection Solution." For inspecting the joints of mounted BGAs, we offer void analysis software "BGA Pro," and for inspecting soldering anomalies in resistors, capacitors, etc., we provide the mounted component inspection software "SMT Inspection Pro," among a diverse lineup. Please feel free to consult us when needed. 【Product Lineup】 ■ Void analysis software "BGA Pro" ■ Mounted component inspection software "SMT Inspection Pro" ■ Reel component inspection and counting software "Reel Inspection Pro" ■ Automatic wire bond inspection software "Wire Inspection Pro" *For more details, please refer to the related links or feel free to contact us.

• X-ray inspection equipment

We would like to introduce Kyosei Technos' "Global Services (Repair and Calibration)" that we offer. We provide repair services for electronic measuring instruments and industrial electronic devices used at your overseas locations, as well as calibration services for electronic measuring instruments and weighing devices, at our bonded factory located within the economic special zone at Kansai International Airport. The factory is right next to the runway, allowing us to start work immediately without customs clearance, which enables a reduction in lead time. 【Features】 - Not only do we repair the faulty parts, but we also take preventive measures. - Repairs are conducted by technicians approved by the manufacturers. - Repairs are completed within 1 to 5 days (with express service, repairs can be done within 24 hours). - Shortening the repair period reduces the need for spare equipment. - Reducing the repair time increases customer satisfaction. *For more details, please refer to the related links or feel free to contact us.

• Calibration and repair

We would like to introduce our "Probe Holder for Oscilloscopes/Testers." This is an arm (probe positioner or probing arm) that holds probes for oscilloscopes and allows for stable probing and maintenance at measurement points on a circuit board in just a few seconds. The time spent on soldering small components or attaching IC clips can be significantly reduced, enabling more stable probing. 【Features】 - Allows for adjustment of probe position and contact to the desired point over a wide range. - Quickly adjusts the polarity of probes with two needle tips (such as FET probes or differential probes) to match the measurement target. - Comes standard with a magnifying glass for all models. - The base is a very compact circular shape with a diameter of 80mm. *For more details, please refer to the related links or feel free to contact us.

• probe

The "SKW-1000" is a wearable sweat sensor that uses the principle of a ventilation capsule-type sweat meter. Even with a compact sensor, it can measure sweat levels equivalent to traditional stationary devices. Like conventional devices, the measurement values are calibrated by comparing the amount of evaporated moisture per unit time. It can measure sweating during exercise and daily life without restrictions. 【Features】 ■ Main body size: 55mm × 17mm × 46mm ■ Skin-mounted sensor part: φ20 × 11mm ■ Can record on Windows 10, Mac, and Android devices compatible with Bluetooth LE ■ Has a log function that can record sweat data in internal memory (only for SKW-1000S) *For more details, please refer to the related links or feel free to contact us.

• Sensors

We would like to introduce the "Motor Drive System," which integrates the MATLAB-compatible real-time simulator and power analyzer that we handle. By combining the MATLAB-compatible high-speed controller "DT-0007" from DSP Technology and the power analyzer "PW8001" from Hioki Electric, we streamline the development of motor control systems. We offer a variety of equipment for measuring/testing motors available for rent. 【Application Examples】 ■ Real motor drive and algorithm verification using MATLAB control models ■ Automatic generation of phase tables necessary for maximum efficiency control (Automatic execution sequence of operating patterns, automatic measurement) ■ Automatic fitting of motor control parameters (Integration with automatic optimization tools such as Optimus, modeFRONTIER, HEEDS, etc.) *For more details, please refer to the related links or feel free to contact us.

• Other motors

We would like to introduce our vapor-phase rust prevention paper, "FK-60 for Iron." This product is impregnated with a vapor-phase rust inhibitor that provides rust prevention effects simply by wrapping metal products. It is suitable for rust prevention during the storage and transportation of metal parts such as steel, steel coils, steel plates, wire rods, pipes, automobiles, industrial machinery, and transportation machinery. 【Features】 - The rust inhibitor dissolves from the paper into the air, creating a rust prevention film on every corner of the metal surface. - Rust prevention effects can be achieved even in small gaps where rust oil cannot reach. - After opening, there is no need to clean the metal products; they can be used immediately. - The rust prevention effect lasts for six months to over a year (depending on the environment). - We offer rust prevention paper suitable for various metals, including those for steel. *For more details, please refer to the related links or feel free to contact us.

• Rust Inhibitor

We would like to introduce our sulfur gas adsorbent, 'SD-B-003'. It protects valuable products and parts from corrosive gases and is suitable for the transportation and storage of electrical equipment and components. Sulfur gas is released from cardboard and has the property of corroding metals. This product demonstrates a high effectiveness in reducing and delaying the corrosion of silver and copper. 【Features】 ■ Simply include an appropriate amount in the cardboard used for transporting and storing products and parts. ■ Improves yield of parts by preventing defects caused by rust and corrosion from sulfur gas. ■ Reduces the return rate of products due to defects caused by rust and corrosion from sulfur gas. *For more details, please refer to the related links or feel free to contact us.

• Other packaging materials

"Aurora/AiKer" is a PRA tool equipped with real-time video judgment capabilities. It allows for video judgment in various modes and still image judgment. It controls what is visible on the screen as if a person were operating it. This system frees you from manual measurement tasks and the oversight of inexperienced operations, enabling the automation of various tests and repetitive tasks. [Features] ■ Multifunctional image judgment capabilities ■ Utilizes existing assets as they are ■ Powerful reporting features ■ High customizability *For more details, please refer to the related links or feel free to contact us.

• Other measurement, recording and measuring instruments

We would like to introduce our "High-Frequency Viscoelastic Measurement Service." This is an ultrasonic viscoelastic measurement that differs from conventional DMA and rheometers. Based on the theory of wave propagation at high frequencies, we can measure complex elastic modulus, enabling high-frequency viscoelastic measurements at room temperature. 【Features】 ■ On-site measurement of viscoelasticity at megahertz frequencies at room temperature ■ Applicable to liquids and solids (ink for inkjet, gels, rubber, resins, composite materials) ■ Ability to compare surface and bulk viscoelasticity ■ Quantification of physical property changes on the surface, such as surface degradation and adhesion ■ Evaluation of the skin layer of molded products *For more details, please refer to the related links or feel free to contact us.

• Other measurement, recording and measuring instruments