IMCDジャパン List of Products and Services

The "MK Mist Separator" is a product that can remove over 99% of mist from gas at high speeds. The claw-like protrusions (troughs) that collect mist colliding with the blades, along with notches etched into the blade surface, enable high-efficiency mist removal and prevent re-entrainment. With this blade, particles larger than 20μ can be almost completely separated. We also supply units ranging from small ones of about 30m³/min to large ones of 1400m³/min. 【Features】 ■ High-efficiency separation ■ Low pressure loss ■ Complete corrosion resistance ■ Lightweight ■ No clogging *For more details, please refer to the PDF document or feel free to contact us.

The "MK High Chemical Tank" is a maintenance-free, corrosion-resistant FRP tank. The molded product has a certain degree of transparency, allowing for liquid level visibility. It has excellent corrosion resistance and is lightweight. Additionally, it is widely used in the chemical, metal, food, and paper industries. Please feel free to contact us when you need assistance. 【Features】 ■ Excellent corrosion resistance ■ Lightweight molded product ■ Generally maintenance-free ■ Molded product has a certain degree of transparency, allowing for liquid level visibility ■ Generally does not require exterior painting ■ Nozzle addition or modification can be easily done on-site *For more details, please refer to the PDF document or feel free to contact us.

The "MK Corrosion-Resistant Scrubber" has successfully achieved compactness and is a corrosion-resistant FRP scrubber that does not require a large installation area. It adopts packing materials with a large effective leakage area, such as structured packing and other fillers. The washing liquid updates the liquid level while repeating aggregation and dispersion, enhancing the gas-liquid contact effect. Combined with its unique shape design, it achieves a high removal efficiency. Additionally, due to the large void fraction of the packing, the pressure loss within the tower is less compared to other packed towers (like Raschig rings). 【Features】 ■ High removal efficiency ■ Minimal pressure loss ■ Energy cost savings ■ Small installation area required ■ Perfect corrosion-resistant structure ■ Lightweight and no risk of breakage *For more details, please refer to the PDF document or feel free to contact us.

The "MK High Chemical Duct" is a corrosion-resistant FRP duct widely used in the chemical, metal, food, and paper industries. It consists of a corrosion-resistant layer made up of a surface layer and an intermediate layer to provide corrosion resistance, and a reinforcement layer (outer layer) to provide structural strength. Additionally, if there is a need to improve appearance or provide weather resistance, an outermost layer may be added. 【Features】 ■ Excellent corrosion resistance ■ Lightweight molded products ■ Generally maintenance-free ■ Molded products have a certain degree of transparency, allowing for easy confirmation of drain accumulation ■ Generally does not require exterior painting ■ Nozzle additions or modifications can be easily done on-site *For more details, please refer to the PDF document or feel free to contact us.

The "MK High Chemical Pipe" is a high-strength, corrosion-resistant FRP pipe produced through long-accumulated production technology and unique development using FW machine molding. It consists of a corrosion-resistant layer made up of a surface layer and an intermediate layer to provide corrosion resistance, and a reinforcement layer (outer layer) to provide structural strength. The corrosion-resistant layer is formed using the hand lay-up (HU) method, while the reinforcement layer is molded using the filament winding (FW) method. 【Features】 ■ Excellent chemical resistance ■ Lightweight and strong ■ Wide temperature range for use ■ Good thermal insulation ■ Good electrical insulation *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce the "Large FRP Structures" that we handle. The "MK Large FRP Tank" is a product that enables the production of large-diameter and large-capacity tanks through prefabrication. The "MK Large FRP Flue and Chimney" is a product that can convert high-temperature molten iron into cement materials through water agitation, promoting effective resource utilization. 【Features of MK Large FRP Tank】 ■ Can be manufactured on-site in narrow places where delivery is impossible ■ Successfully achieved significant cost reduction for large-capacity FRP tanks ■ Unique design ■ Short assembly time ■ No level gauge required, easy moisture-proofing work *For more details, please refer to the PDF materials or feel free to contact us.

The "MD Series" is an MK corrosion-resistant FRP damper developed from years of experience and advanced technology in the manufacturing of corrosion-resistant equipment and devices. It is suitable for applications such as pickling exhaust lines in steel and non-ferrous metal factories, and exhaust lines for desulfurization equipment. We offer a variety of butterfly dampers with different drive methods, ranging from small to large sizes, to meet various customer needs. 【Features】 ■ Exceptional corrosion resistance, using FRP resin (vinyl ester resin) that can withstand corrosive gases ■ Robust and durable structure, providing excellent longevity for long-term use ■ A wide range of sizes and shapes (round and square) tailored to installation conditions ■ Drive methods (manual and electric) available to suit the intended use or application ■ Operating environment: -20°C to 80°C ■ Design pressure: ±15kPa *For more details, please refer to the PDF materials or feel free to contact us.

We would like to introduce the "MK Lining System" that we handle. It consists of flake lining, FRP lining, and their hybrid (composite type), maintaining excellent corrosion resistance and durability. Based on the corrosion technology and construction management methods cultivated through our FRP equipment engineering, we provide our customers with functional and cost-effective lining equipment. 【Features of Flake Lining】 ■ Exhibits excellent resistance to various acids, bases, solvents, gases, etc. ■ Prevents the penetration of chemicals and corrosive gases even with a thin film thickness ■ No concerns about cracking or peeling even with repeated use at high temperatures ■ Easy to install on-site ■ Significantly contributes to reducing maintenance costs ■ Produces stable performance with minimal quality variation *For more details, please refer to the PDF materials or feel free to contact us.