MSR List of Products and Services

This document introduces the mold vacuum drawing device "MV System." It includes sections such as "What is Mold Vacuum Drawing," "Features of the MV System," "Points of Mold Vacuum Drawing," and "Benefits of Introducing the MV System." Mold vacuum drawing technology can improve production efficiency and achieve beautiful injection surfaces. We encourage you to read it. 【Contents】 ■ About Plastic Molding ■ What is Mold Vacuum Drawing ■ Features of the MV System ■ Points of Mold Vacuum Drawing ■ Benefits of Introducing the MV System ■ MV System Lineup *For more details, please refer to the PDF document or feel free to contact us.

• Other molds
• Plastic Mould
• Mold Design

The "MV System" for mold vacuuming is expected to extend the mold maintenance cycle (improving productivity), reduce internal pressure (countermeasures for shrinkage, warping, and burrs), and enhance quality (improving appearance). By fundamentally removing the air and filling gas that originally exist in the mold using vacuum technology, the risk of adhesion within the mold is reduced. Mold vacuuming technology can improve production efficiency and achieve a beautiful injection surface. [Expected Benefits of the MV System] ■ Extension of mold maintenance cycle (improving productivity) ■ Reduction of internal pressure (countermeasures for shrinkage, warping, and burrs) ■ Quality improvement (improving appearance) ■ Countermeasures for scorching and short molds ■ Feedforward (preemptive measures for molding defects) *For more details, please refer to the PDF document or feel free to contact us.

• Other molds
• Plastic Mould
• Mold Design

The "MV-HP01/02" is a high-spec model vacuum molding device. It is compatible with a multi-control system. The designed exhaust capacity is 1,600/2,000 L/min (50Hz/60Hz), and the maximum vacuum level is over -90 kPa. Please feel free to consult us when you need assistance. 【Specifications (partial)】 ■ Designed exhaust capacity: 1,600/2,000 L/min (50Hz/60Hz) ■ Device dimensions: W890mm × D462mm × H974mm ■ Device weight: 165 Kg ■ Tank capacity: 35L ■ Connection port: 3/8 tap port, 4 ports *For more details, please refer to the PDF document or feel free to contact us.

• Other molds
• Plastic Mould
• Mold Design

The "MV-H01/02" is a vacuum extraction device for molds in a high vacuum model. It is compatible with a multi-control system. The designed exhaust capacity is 438/515L/min (50Hz/60Hz), and the tank capacity is 35L. Please feel free to consult with us when you need assistance. 【Specifications (partial)】 ■ Maximum vacuum degree: -101.12kPa ■ Device dimensions: W670mm × D462mm × H805mm ■ Device weight: 60Kg ■ Tank capacity: 35L ■ Connection port: 3/8 tap port, 4 ports *For more details, please refer to the PDF document or feel free to contact us.

• Other molds
• Plastic Mould
• Mold Design

The "MV-01/02" is a standard model vacuum forming machine. It is compatible with a multi-control system. The designed exhaust capacity is 560/600L/min (50Hz/60Hz), and the maximum vacuum level is -80kPa. Please feel free to consult us when you need assistance. 【Specifications (partial)】 ■ Equipment height (two-stage): W670mm × D462mm × H805mm ■ Equipment height (three-stage): W600mm × D350mm × H1,040mm ■ Equipment weight: 45Kg ■ Tank capacity: 35L (two-stage) 10L (three-stage) ■ Connection port: 3/8 tap port, 4 ports *For more details, please refer to the PDF document or feel free to contact us.

• Other molds
• Plastic Mould
• Mold Design

The "MV System" allows for molding to be performed while removing gas components when filling the mold with raw materials, resulting in a wider range of injection speeds. By fundamentally removing the air and filling gas that originally exist in the mold using vacuum technology, the risk of adhesion within the mold is reduced. Mold vacuum technology can improve production efficiency and achieve a beautiful injection surface. 【Benefits of Implementation】 ■ Expands the range of molding conditions - Since molding can be performed while removing gas components when filling the mold with raw materials, the range of injection speeds increases. - Expected results: voids, bubbles, sink marks, warping, burrs. ■ The mold is less likely to get dirty because the filling gas is removed. *For more details, please refer to the PDF materials or feel free to contact us.

• Other molds
• Plastic Mould
• Mold Design

The ideal for vacuum forming with molds is to have no residual air, meaning that the resin is filled after the inside of the mold has been evacuated to a vacuum. Even in cases where complete sealing is impossible due to the mold structure, it is possible to increase the vacuum level by sealing as much as possible, thereby achieving the degassing effect at the points that need to be removed. Our "MV System" is designed with the customers who will actually use it in the molding field as the top priority, aiming to be the industry’s highest class vacuum molding equipment (mold gas venting device). [Points of Mold Vacuuming] - Lowering the internal pressure of the mold to widen the filling conditions - Applying seals (sealing by welding) to the gaps in the mold to enhance airtightness - Preventing the entry of external air by increasing the degree of sealing - Even in cases where complete sealing is impossible, increasing the vacuum level by sealing as much as possible allows for the degassing effect at the points that need to be removed. *For more details, please refer to the PDF document or feel free to contact us.

• Other molds

The mold vacuum extraction device MV system removes air and filling gas from the mold using vacuum technology during the injection molding process, achieving a reduction in molding defects, stabilization of molding conditions, and overall improvement in quality and productivity. For the eternal theme of plastic injection molding, let the mold vacuum extraction device MV system handle gas venting. The MV system is a gas venting device for molds specifically designed for plastic injection molding. The MV system fundamentally removes air that originally exists in the mold and filling gas that enters the mold during filling using a vacuum pump and vacuum technology. ● Expected benefits of the MV system: - Extension of mold maintenance cycles (improved productivity) - Reduction of internal mold pressure (countermeasures against sink marks, warping, and burrs) - Quality improvement (enhanced appearance) - Countermeasures against burning and short molds - Feedforward (preventive measures against molding defects) The mold vacuum extraction device MV system adopts a multi-control system, allowing up to two injection molding machines to perform gas venting at arbitrary timings. The MV system, equipped with a multi-control system, helps to reduce capital investment costs for countermeasures against molding defects.

• Injection Molding Machine
• Plastic Mould
• plastic