セブンシックス List of Products and Services

The FTBx-8848x series is a 400GbE network tester that can be configured with multiple small ports and supports 112G electrical lanes. The DCO supports 400G ZR and OpenZR+ for QSFP-DD and OSFP. The rack-mounted chassis LTB-8 (3U size) can accommodate up to 4 modules, allowing for 400GbE with 8 ports. 【Features】 - Achieves miniaturization and multi-port configuration (400GbE x 2-4) compared to the existing FTBx-88460 series - Supports 112G electrical (SFP112/QSFP112) - DCO supports 400G ZR and OpenZR+ for QSFP-DD and OSFP - Terminal adapters (TA) support TA-QSFP28, TA-SFP28, and TA-CFP4 - The rack-mounted chassis LTB-8 (3U size) can accommodate up to 4 modules, allowing for 400GbE with 8 ports *For more details, please refer to the PDF document or feel free to contact us.

The "FTBx-8880x" series is a network tester that supports 800Gb Ethernet. It offers two models with different port configurations: "FTBx-88800" and "FTBx-88801." It is expected to support various optics such as 800G-ZR/LR/LR8/FR8/2FR4/2LR4/DR8/2DR4/SR8/2SR4, etc. 【Features】 ■ 800GbE × 2 ports implemented in one module ■ Two models with different port configurations available ■ Expected to support various optics such as 800G-ZR/LR/LR8/FR8/2FR4/2LR4/DR8/2DR4/SR8/2SR4, etc. * For more details, please refer to the PDF document or feel free to contact us.

We provide a wide range of PIC testing environments, including passive and active component testing and BER testers. Based on your requirements, we can customize the configuration for each optical integrated circuit you wish to measure. Please feel free to contact us when you need assistance. 【Features】 ■ We offer testing environments for a wide range of optical integrated circuits at the wafer level, die level, and component level. ■ We provide a one-stop solution from automation software and probe systems to optical/electrical/performance measurement systems. * You can download the Japanese and English versions of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

The "T200S" is a wavelength-tunable laser light source that achieves stable high output, narrow linewidth, ultra-low noise, and wideband wavelength tuning with mode-hop-free fast sweeping. It supports the O-band and CL-band, which are widely used in the field of optical communications. It supports both wavelength tuning mode and continuous sweeping mode, making it suitable for various research and development applications, as well as testing of optical components and optical waveguides. 【Features】 ■ >90dB wide dynamic range: SSSER >90dB (typ), STSSER >75dB (typ) ■ High output of >10dBm across the entire wavelength tunable range ■ Narrow linewidth: <50kHz ■ Reliable high-speed sweeping (up to 200nm/s) achieved through mode-hop-free control ■ CL-band model (1500–1630nm) / O-band model (1260–1360nm) *For more details, please refer to the PDF document or feel free to contact us.

The T500S is a wavelength-tunable laser that fully supports O/E/S/C/L/U-band. With a wideband wavelength tuning range, stable high output, narrow linewidth, and ultra-low noise, it excels in various research and development applications as well as testing of optical components and optical waveguides. Please feel free to contact us when you need assistance. 【Features】 ■ Supports an extremely wide bandwidth and a broad wavelength range ■ High output of >10dBm and tunable across the entire wavelength range ■ Reliable high-speed sweeping (up to 200nm/s) achieved through mode-hop-free control ■ Narrow linewidth of <50kHz *For more details, please refer to the PDF document or feel free to contact us.

The "BA-4000" is an electrical BER tester that supports NRZ and PAM4 coding, equipped with advanced FEC tools, and has testing capabilities up to 800G. It is well-suited for testing and evaluating devices that use high-speed transmission standards such as PAM4 modulation methods for 800GbE/400GbE (optical transceivers, OSA, FPGA, etc.). The user interface displays the test results for each channel simply and in real-time. 【Features】 ■ Full support for testing transmission standards of 800G/400G/200G/100G (up to 56GBd, NRZ/PAM4, up to 8 channels) ■ Essential FEC simulation function for burst error analysis ■ High-quality eye pattern of generated signals ■ Easy-to-remove O-SMPM connector for RF interface ■ Supports PRBS 7/9/11/13/15/23/31/13Q/31Q, SSPRQ *For more details, please refer to the PDF document or feel free to contact us.

The "CD-4000" is a Clock Data Recovery (CDR) device designed to optimize synchronization when combined with EXFO's Bit Error Rate Tester BA-4000 and Sampling Oscilloscope EA-4000. It supports optical signals from 1250nm to 1650nm and can be used for testing and evaluating optical transceivers. Please feel free to contact us if you have any inquiries. 【Features】 ■ NRZ/PAM4 support ■ Integrated O/E with optical splitter ■ Ultra-low random jitter ■ Auto-locking * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

The "EA-4000" is a high-speed measurement optical sampling oscilloscope that supports 28G NRZ signals, with a full range of 830 to 1600nm and a wide bandwidth of 33GHz, capable of measuring over 1000 waveforms in under 2 seconds. It achieves excellent performance with extremely low jitter and is compatible with 25G to 100G standard masks (MSA). With industry-leading high-speed measurements (1000 waveforms in under 2 seconds), it enables a reduction in inspection labor and an increase in throughput on production lines for optical components. 【Features】 ■ Ultra-fast scope measuring over 1000 waveforms in 2 seconds at 1M samples/second (2000 samples/waveform) ■ Supports 28G NRZ signals ■ Supports low jitter mode ■ Supports full range model (830 to 1600nm) and single mode model (1250 to 1600nm) * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

The "XTA-50/XTM-50" is a wavelength and bandwidth variable flat-top optical filter with a wide wavelength range (standard 1450–1650nm) and steep edge characteristics. It is suitable for applications such as analysis of subbands with complex modulation schemes and reduction of channel spacing. We offer four models: standard, ultrafine, wide, and band. 【Features】 ■ Variable center wavelength: 1450–1650nm (standard) ■ Variable bandwidth: 50–950pm (standard) 50–5000pm (wide) ■ Steep edge characteristics: 500dB/nm (standard) 800dB/nm (ultrafine) ■ O-band compatible models are also available ■ Available in two models: manual operation type (XTM-50) and automatic type (XTA-50) * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

The "CTP10" is a platform for measuring and evaluating IL/RL/PDL of optical integrated circuits and optical passive components. When combined with a tunable laser (T100S-HP), it provides high-precision swept IL/RL/PDL measurements, and its modular design allows for a highly flexible measurement environment. Please feel free to contact us when you need assistance. 【Features】 ■ Wavelength range: 1240-1680 nm ■ Dynamic range: 70 dB in a single sweep ■ IL resolution: 0.0001 dB ■ Up to 50 detectors per platform ■ Wavelength accuracy: ±5 pm ■ Sampling resolution: 1 pm @ sweep speed 100 nm/s * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.

This product is a measurement device for wavelength dispersion (Chromatic Dispersion) and polarization mode dispersion (Polarization Mode Dispersion) in optical fiber transmission paths. We offer a variety of products, from long-distance transmission paths of 12,000 km to mesh networks that can measure up to 120 km in a single-ended configuration. Please feel free to contact us when you need assistance. 【Product Lineup】 ■FTB-5800 (FLS-5834A) ■FTB-5500B (FLS-5834A) ■FTB-5700 *You can download the English version of the catalog. *For more details, please refer to the PDF materials or feel free to contact us.

We offer "PIC (Photonic Integrated Circuit) Test Solutions." We provide a wide range of PIC test environments, including passive and active component testing and BER testers. According to your requirements, we can customize the appropriate configuration for each photonic integrated circuit (PIC) you wish to measure. 【Features】 ■ We provide test environments for a wide range of photonic integrated circuits, including passive components, active components, quantum photonics chips (dies), AWGs, and transceivers (transmission, BER) at the wafer level, die level, and component level. ■ We offer a one-stop solution from automation software and probe systems to optical/electrical/performance measurement systems. *For more details, please download the PDF or feel free to contact us.

The "FTBx-8880x" series is a network tester compatible with 800Gb Ethernet. It is expected to support various optics such as 800G-ZR/LR/LR8/FR8/2FR4/2LR4/DR8/2DR4/SR8/2SR4. Additionally, it implements 800GbE × 2 ports in one module. However, simultaneous operation is not possible (switching is possible). 【Features】 ■ Two models with different port configurations are available: ・FTBx-88800: QSFP800G × 2 ports ・FTBx-88801: QSFP800G × 1 port + OSFP800G × 1 port ■ It is expected to support various optics such as 800G-ZR/LR/LR8/FR8/2FR4/2LR4/DR8/2DR4/SR8/2SR4. *For more details, please download the PDF or feel free to contact us.

The FTBx-8848x series is a 400GbE network tester that can be configured with multiple small ports and supports 112G Electrical lanes. Compared to the existing FTBx-88460 series, it achieves miniaturization and multi-port configuration (400GbE x 2 to 4). Additionally, the rack-mounted chassis LTB-8 (3U size) can accommodate up to 4 modules, equating to 400GbE x 8 ports. 【Features】 ■ Achieves miniaturization and multi-port configuration (400GbE x 2 to 4) compared to the existing FTBx-88460 series ■ DCO supports QSFP-DD and OSFP 400G ZR and OpenZR+ ■ TA (Terminal Adapter) supports TA-QSFP28, TA-SFP28, and TA-CFP4 ■ The rack-mounted chassis LTB-8 (3U size) can accommodate up to 4 modules, equating to 400GbE x 8 ports *For more details, please download the PDF or feel free to contact us.

The T500S is a wavelength-tunable laser that fully supports O/E/S/C/L/U-band. With a wide wavelength tuning range, stable high output, narrow linewidth, and ultra-low noise, it excels in various research and development applications, as well as testing of optical components and optical waveguides. Additionally, it offers high output of >10dBm and tunability across the entire wavelength range. 【Features】 ■ Supports an extremely wide bandwidth and a broad wavelength range - O-band: 1240–1360nm - ES-band: 1350–1510nm - SCL-band: 1460–1640nm - CL-band: 1500–1640nm - CLU-band: 1500–1680nm *For more details, please download the PDF or feel free to contact us.

The "T200S" is a wavelength-tunable laser light source that achieves stable high output, narrow linewidth, ultra-low noise, a wideband wavelength tunable range, and high-speed sweeping in a mode-hop-free manner. It supports the O-band and CL-band, which are widely used in the field of optical communication. It supports both wavelength tuning mode and continuous sweeping mode, making it suitable for various research and development applications, as well as testing of optical components and optical waveguides. Additionally, there are wavelength tuning mode and continuous sweeping mode available. 【Features】 ■ >90dB wide dynamic range: SSSER >90dB (typ), STSSER >75dB (typ) ■ High output of >10dBm across the entire wavelength tunable range ■ Narrow linewidth: <50kHz *CL-band model, tuning mode ■ Reliable high-speed sweeping (up to 200nm/s) achieved through mode-hop-free control *For more details, please download the PDF or feel free to contact us.

The "XTA-50/XTM-50" is a wavelength and bandwidth variable flat-top optical filter with a wide wavelength range (standard 1450–1650nm) and steep edge characteristics. It is available in two models: the manual operation type "XTM-50" and the automatic type "XTA-50." There is also a model compatible with the O band. Please feel free to contact us for inquiries. 【Features】 ■ Variable center wavelength 1450–1650nm (standard) ■ Variable bandwidth 50–950pm (standard) 50–5000pm (wide) ■ Steep edge characteristics 500dB/nm (standard) 800dB/nm (ultrafine) ■ O band compatible models are also available ■ Available in two models: manual operation type (XTM-50) and automatic type (XTA-50) *For more details, please download the PDF (English version) or feel free to contact us.

The "FIP-500" is a high-grade model of an end face inspection device (fiber scope) that supports fully automated inspection (detection, brightness adjustment, focus, centering, imaging, pass/fail judgment, and data storage) for various optical connector end faces, from single-core to multi-core (MPO). It is a standalone type with an integrated display, and it has a battery life of 11 hours. Additionally, it can transfer data to smartphones and PCs via Bluetooth and USB. 【Features】 ■ Automation of all processes in end face inspection (detection, brightness adjustment, focus, centering, imaging, pass/fail judgment, data storage) ■ Compatible with various optical connectors including single-core (LC, SC, FC, etc.) and multi-core (MPO) ■ Standalone type with an integrated display ■ 11-hour battery life ■ Data transfer to smartphones and PCs via Bluetooth and USB *For more details, please download the PDF (English version) or feel free to contact us.

The "FTBx-5235" is a compact and small optical spectrum analyzer that enables network analysis for both CWDM and DWDM with a single unit. With this device, you can measure the optical power and OSNR for each channel of CWDM light ranging from 1270 to 1610 nm, as well as DWDM/coherent communication light with 50GHz/100GHz spacing. We also offer demo units for loan, so please feel free to contact us. 【Features】 ■ Compact and small design ■ Covers a wide wavelength range with a single unit ■ Diverse analysis functions ■ Fast measurement: measurement time < 1.2 seconds * For more details, please download the PDF (English version) or feel free to contact us.

The "Single-Mode Fiber" is a fiber optic core identifier that supports not only dark fiber but also live lines. It is a solution that allows for core identification without interrupting ongoing communication services. We also have demo units available, so please feel free to inquire. 【Features】 ■ Core identification function for optical fiber (single-mode fiber) ■ Position confirmation of specific dark fibers through tone recognition (270Hz, 1kHz, 2kHz) ■ Achieves minimal loss: less than 1dB ■ Accelerates test cycles to three times the speed *For more details, please download the PDF or feel free to contact us.

The "CD/PMD Analyzer" is a measurement device for chromatic dispersion and polarization mode dispersion in optical fiber transmission paths. It offers a variety of lineups, from long-distance transmission paths of 12,000 km to mesh networks that can be measured up to 120 km in a single-ended configuration. Please feel free to contact us if you need assistance. 【Features】 ■ A variety of lineups are available, from long-distance transmission paths of 12,000 km to mesh networks that can be measured up to 120 km in a single-ended configuration. *For more details, please download the PDF (English version) or feel free to contact us.

The "CTP10" is a platform for measuring and evaluating IL/RL/PDL of optical integrated circuits and optical passive components. When combined with a tunable laser (T100S-HP), it provides high-precision sweeping IL/RL/PDL measurements, and due to its modular design, it allows for a highly flexible measurement environment. Please feel free to contact us if you have any inquiries. 【Features】 ■ Wavelength range: 1240-1680nm ■ Dynamic range: 70dB in a single sweep ■ IL resolution: 0.0001dB ■ Up to 50 detectors per platform ■ Wavelength accuracy: ±5pm ■ Sampling resolution: 1pm at a sweep speed of 100nm/s *For more details, please download the PDF (English version) or feel free to contact us.

The FTBx-88460 is a versatile tester that supports the new 400G/200G/100Gbps Ethernet communication standards (IEEE802.3bs, IEEE802.3ba). The newly applied PAM4 modulation and FEC for 400G bring a higher level of complexity, making quality of service measurement for 400GbE increasingly essential. Our product from EXFO comprehensively supports a variety of testing needs, including L3 layer testing, with its rich testing capabilities. 【Features】 ■ Flexibly supports various form factors such as QSFP-DD, OSFP, CFP8, QSFP28, and QSFP56 (Open Transceiver System) ■ Ensures scalability to interfaces (CFP2-DCO, 400G-ZR, etc.), capable of accommodating CFP2-DCO (over 21W) that requires high power capacity within the same chassis ■ Supports various functions such as EtherBERT, RFC-2544, TrafficGen, and EtherSAM, enabling L3 testing for IPv4 & IPv6 *For more details, please download the PDF or feel free to contact us.

The "OX-1" is a fiber optic checker that can simultaneously measure the length/loss/reflection of fiber optic lines with a single-end connection in just 3 seconds. We propose reductions in capital investment and operating costs to a wide range of customers involved in the construction and maintenance of fiber optic wiring. Additionally, with "Fault Xplorer," it automatically detects and analyzes fault elements in the line. 【Features】 ■ Measurement possible with single-end connection only ■ Simultaneous measurement of cable length, loss, and reflection of SMF within 3 seconds ■ Unique algorithm provides a five-star rating display of line quality ■ Connector connection part is replaceable, significantly improving maintainability ■ Automatic detection and analysis of fault elements in the line is also possible ■ Built-in power monitor and light source *For more details, please download the PDF or feel free to contact us.

The "MPO Cable Checker" is a tester that can automatically check the fiber continuity, connector end face, and polarity of optical cables with MPO connectors. By combining a light source unit, observation probe, and connector chip, it is possible to quickly check the quality of all MPO cables, including SMF/MMF and 12-core/24-core cables. With the mobile application "ConnectorMax Analysis Software," which has pass/fail judgment and reporting functions, users can easily perform inspections on-site and check the results. 【Features】 ■ Supports APC, UPC, male (with pins), and female (without pins) connectors ■ Automatic PDF reporting function ■ A mobile device application that allows management of results in one app *For more details, please download the PDF (English version) or feel free to contact us.

The "PX-1" is a multifunctional general-purpose optical power meter capable of measuring up to 45 wavelengths (850nm/1310nm/1550nm/CWDM/PON, etc.) with a single unit. It can transfer data to PCs and smartphones via USB and Bluetooth connections, and it complies with the IP54 dust and water resistance standards. Additionally, it features automatic wavelength recognition and switching functions. Please feel free to contact us if you have any inquiries. 【Features】 ■ Capable of measuring up to 45 wavelengths (850nm/1310nm/1550nm/CWDM/PON, etc.) ■ Compact and lightweight, palm-sized (133x78x30mm/225g) ■ Battery-operated for 8 hours (USB rechargeable) ■ Data transfer to PCs and smartphones via USB and Bluetooth connections ■ Complies with IP54 dust and water resistance standards ■ Equipped with automatic wavelength recognition and switching functions *For more details, please download the PDF (English version) or feel free to contact us.

The "MA-4000" is a tester specialized for bit error rate testing (BERT) of optical transceivers that support transmission standards such as 400GbE and 100GbE. It adopts a modular connector board (MCB) replacement method and supports QSFP-DD, OSFP, QSFP28, SFP28, and SFP-DD. There is no need for cumbersome and bulky RF cables for connection work (direct contact between circuit boards). Additionally, it features a powerful FEC simulation function that strongly supports burst error analysis. 【Features】 ■ 8 channels, 10–28GBd, supports PAM4/NRZ ■ Adopts MCB replacement method and supports QSFP-DD, OSFP, QSFP28, SFP28, and SFP-DD ■ Flexible support for future standards through MCB replacement ■ No need for cumbersome and bulky RF cables for connection work (direct contact between circuit boards) ■ Powerful FEC simulation function that strongly supports burst error analysis ■ Voltage test function with built-in power supply of 3.13–3.465V *For more details, please download the PDF or feel free to contact us.

The "BA-4000" is a bit error rate tester suitable for testing and evaluating high-speed transmission standards using PAM4 modulation methods such as 800GbE/400GbE, including devices like optical transceivers, OSAs, and FPGAs. In high-speed transmission standards applying PAM4 modulation like 400GbE/800GbE, it is stipulated that FEC (Forward Error Correction) must be used to ensure transmission quality, and evaluations of transmission quality also require assessments that include error correction by FEC. The FEC simulation function of this product provides various analysis capabilities for burst errors. 【Features】 ■ Full support for testing transmission standards of 800G/400G/200G/100G (up to 56GBd, NRZ/PAM4, up to 8 channels) ■ Essential FEC simulation function for burst error analysis ■ High-quality eye patterns of generated signals ■ Easy-to-remove O-SMPM connector for RF interface ■ Supports PRBS 7/9/11/13/15/23/31/13Q/31Q, SSPRQ *For more details, please download the PDF or feel free to contact us.

The "CD-4000" is a CDR (Clock Data Recovery) designed to achieve synchronization optimization when combined with EXFO's Bit Error Rate Tester "BA-4000" and Sampling Oscilloscope "EA-4000". Supports NRZ/PAM4. Integrated O/E with optical splitter. Suitable for testing and evaluating optical transceivers. Please feel free to contact us when you need assistance. 【Features】 ■ NRZ/PAM4 support ■ Integrated O/E with optical splitter ■ Ultra-low random jitter ■ Auto-locking *For more details, please download the PDF or feel free to contact us.

The "EA-4000" is a high-speed measurement optical sampling oscilloscope that supports 28G NRZ signals, with a full range of 830 to 1600nm and a wide bandwidth of 33GHz, capable of measuring over 1000 waveforms in under 2 seconds. With industry-leading high-speed measurements (1000 waveforms in under 2 seconds), it enables the reduction of inspection labor in the production lines of optical components and improves throughput. Please feel free to contact us when you need assistance. 【Features】 ■ Ultra-fast scope measuring over 1000 waveforms in 2 seconds at 1M samples/second (2000 samples/waveform) ■ Supports 28G NRZ signals ■ Supports low jitter mode ■ Supports full range model (830-1600nm) and single mode model (1250-1600nm) *For more details, please download the PDF or feel free to contact us.