Japan Bopixel Co., Ltd. List of Products and Services

In the field of research and development, material analysis requires the visualization of the internal structure and composition of materials, as well as a detailed analysis of their properties. In particular, analysis using near-infrared light is important for obtaining information about the internal structure and chemical bonds of materials. However, conventional cameras have faced challenges due to insufficient resolution and sensitivity, resulting in inadequate data. This product opens up new possibilities in material analysis by incorporating a CMOS sensor that balances high resolution and speed while enhancing near-infrared sensitivity. 【Application Scenarios】 - Observation of internal structures of materials - Visualization of chemical reactions - Non-destructive testing 【Benefits of Implementation】 - High quantum efficiency (QE) in the 850–940nm range - Detailed analysis due to high resolution - Easier capture of dynamic phenomena through high-speed imaging - Increased information acquisition due to improved near-infrared sensitivity

• Monochrome camera
• High Speed Camera

In the food industry, foreign object contamination is a significant issue that can lead to consumer health hazards and a loss of trust in companies. High precision and rapid inspection capabilities are required for foreign object detection. Our 25MP NIR camera, equipped with a CMOS sensor that enhances near-infrared (NIR) sensitivity, strongly supports the detection of foreign objects in food by achieving high-resolution and high-speed imaging. 【Application Scenarios】 - Foreign object inspection on food production lines - Inspection of foods with a high risk of foreign object contamination - Foreign object detection on high-speed lines 【Benefits of Implementation】 - Improved accuracy of foreign object detection - Reduced inspection time - Prevention of defective products from being released

• Monochrome camera
• High Speed Camera

■Features Equipped with a model that enhances the near-infrared sensitivity of the "GMAX0505" CMOS sensor from Gpixel. This 25MP near-infrared (NIR) camera can capture images at a maximum of 150fps with CXP-12×4Lane output. ■Use Cases - Surveillance at night or in low-light conditions By combining with infrared lighting (IR LED), clear images can be obtained even in darkness. - Intelligent Transportation Systems (ITS) Applications such as ETC gates, vehicle identification, and license plate recognition require reliable image acquisition even in bad weather or at night. - Others Can be utilized in a wide range of fields such as surveillance systems, food, and medical applications where high-speed, high-resolution near-infrared imaging is necessary.

• Monochrome camera
• High Speed Camera

■Features Equipped with a model of the "GMAX0505" CMOS sensor from Gpixel that enhances near-infrared sensitivity. This is a 25MP near-infrared (NIR) camera capable of capturing images at up to 150fps with CXP-12×4Lane output. It can be utilized in a wide range of fields such as monitoring systems, food, and medical applications, where high-speed and high-resolution near-infrared imaging is required for detailed quality assessments based on composition, including moisture content, sugar levels, and the presence of diseases.

• Monochrome camera
• High Speed Camera

■Features This is a UV-compatible model equipped with Sony's CMOS sensor IMX487, featuring an 8.1MP camera. It combines global shutter capability with a maximum output of 133.2fps, allowing for high-speed imaging with significantly reduced noise and high-quality capture. It is used to detect UV light (corona discharge) generated from deteriorated areas of electrical equipment (such as high-voltage overhead lines) to monitor and identify signs of abnormalities or failures from a distance. In addition to inspections in fields where UV cameras have been traditionally used, such as semiconductors, it can also be considered for new areas requiring high-speed performance.

• Color camera

■Features A UV-compatible model equipped with Sony's CMOS sensor IMX487, featuring an 8.1MP camera. It combines global shutter functionality with high-speed performance, supporting output of up to 133.2fps, enabling high-quality imaging with significantly reduced noise. A high-speed, high-resolution camera compatible with UV (ultraviolet) wavelengths. It is well-suited for high-speed inspections of "invisible objects," such as adhesive and oil application inspections, and can also be considered for new areas requiring high-speed performance, including inspections in the semiconductor industry where UV cameras have been used.

• Color camera

■Reasons why Japan Bopixel recommends CoaXPress - It boasts a maximum transfer speed of 12.5 Gbps, making it one of the industry's leading standard high-speed interfaces, allowing for stable image acquisition with high resolution, high speed, and low latency. - Compared to CameraLink and USB3Vision, it allows for much longer cable lengths. Additionally, it uses easy-to-handle coaxial cables and compact, highly reliable DIN and MicroBNC connectors. - There are various options available, such as 6-channel and 8-channel input boards, which help reduce the number of input boards, PCs, and expansion slots when using multiple cameras, leading to a reduction in system costs. - Video output, power supply, and trigger can all be achieved with a single cable, enabling simplified wiring.

• Color camera

■Reasons Why Japan Bopixel Recommends CoaXPress - It boasts a maximum transfer speed of 12.5Gbps, making it one of the industry's leading standard high-speed interfaces, capable of stable image acquisition with high pixel count, high speed, and low latency. - Compared to CameraLink and USB3Vision, it allows for much longer cable lengths. Additionally, it uses easy-to-handle coaxial cables and compact, highly reliable DIN and MicroBNC connectors. - There are various options available, such as 6-channel and 8-channel input boards, which help reduce the number of input boards, PCs, and expansion slots when using multiple cameras, leading to lower system costs. - It enables video output, power supply, and triggering to be achieved with a single cable, allowing for reduced wiring.

• Color camera

■Reasons why Japan Bopixel recommends CoaXPress - It boasts a maximum transfer speed of 12.5 Gbps, making it one of the industry's leading standard high-speed interfaces, enabling stable image acquisition with high pixel count, high speed, and low latency. - Compared to CameraLink and USB3 Vision, it allows for much longer cable lengths. Additionally, it uses easy-to-handle coaxial cables and compact, highly reliable DIN and MicroBNC connectors. - There are various options available, such as 6-channel and 8-channel input boards, which help reduce the number of input boards, PCs, and expansion slots when using multiple cameras, leading to a reduction in system costs. - Video output, power supply, and trigger can all be achieved with a single cable, allowing for simplified wiring.

• Color camera

■Reasons why Japan Bopixel recommends CoaXPress - It boasts a maximum transfer speed of 12.5 Gbps, making it one of the industry's leading standard high-speed interfaces, enabling stable image acquisition with high pixels, high speed, and low latency. - Compared to CameraLink and USB3 Vision, it allows for much longer cable lengths. Additionally, it uses easy-to-handle coaxial cables and compact, highly reliable DIN and MicroBNC connectors. - There are various options available, such as 6-channel and 8-channel input boards, which help reduce the number of input boards, PCs, and expansion slots when using multiple cameras, leading to a reduction in system costs. - It allows for video output, power supply, and triggering to be achieved with a single cable, enabling simplified wiring.

• Color camera

This is a high-resolution, high-speed camera equipped with the Gpixel sensor "GSPRINT4521," capable of capturing images at up to 229 fps with a CXP-12×4Lane output, featuring a resolution of 21MP. The resolution is 5120(H)x4096(V) with 4.5x4.5μm pixels, and the sensor size is APS-C (29.5mm). Thanks to the adoption of next-generation key devices and excellent design technology, it achieves a compact body size with front dimensions of 80mm square. It has low power consumption and excellent heat dissipation, allowing it to be used without cooling fans or heat sinks; however, a model with a fan for higher cooling efficiency is also available. It is equipped with mounting taps on the mount surface and four sides, providing excellent performance for various applications in factory automation.

• Color camera
• Monochrome camera
• High Speed Camera

This is a high-resolution, high-speed 10MP camera equipped with the Gpixel sensor "GSPRINT4510," capable of capturing images at up to 470fps with CXP-12×4Lane output. The resolution is 4608(H)x2176(V) with 4.5x4.5μm pixels, and the sensor size is 4/3. Thanks to the adoption of next-generation key devices and excellent design technology, it achieves a compact body size with front dimensions of 80mm square. It has low power consumption and excellent heat dissipation, allowing it to be used without cooling fans or heat sinks, although a model with a fan for higher cooling efficiency is also available. It is equipped with mounting taps on the mount surface and four sides, providing excellent performance for various applications in factory automation.

• Color camera
• Monochrome camera
• High Speed Camera

This is a high-resolution, high-speed camera equipped with the Gpixel sensor "GSPRINT5514," capable of capturing images at up to 340 fps with a CXP-12×4Lane output and a resolution of 14MP. The resolution is 4608(H) x 3072(V) with 5x5μm pixels, and by cutting the horizontal resolution to 4096, it can achieve the same resolution and optical size as widely used 12MP cameras. It allows for further speed enhancements while maintaining the existing optical system. Thanks to the adoption of next-generation key devices and excellent design technology, it achieves a compact body size with front dimensions of 80mm square. With low power consumption and excellent heat dissipation, it can be used without cooling fans or heat sinks, although a fan-equipped model is also available for higher cooling efficiency. It is equipped with mounting taps on the mount surface and all four sides, providing excellent performance for various applications in factory automation.

• Color camera
• Monochrome camera
• High Speed Camera

A series of line scan cameras developed for high-speed image transmission in machine vision applications using 75Ω coaxial cables, featuring the digital interface "CoaXPress." This product series is equipped with high-speed inspection sensors from the CMOS image sensor manufacturer "GPixel." These sensors are highly sensitive, high-speed, and low-noise, making them suitable for various fields and applications, including machine vision and scientific purposes. The CoaXPress cameras from Japan Bopixel utilize "UltraLowPower FPGA" technology for low power consumption and low heat generation. Compared to other products with the same sensor and interface, they consume less power and can be used without fans or additional heat dissipation items. *For product specifications, please download the catalog. *We also offer demo units for loan, so feel free to contact us. GL3516, GL7008, GL3516, GLT5009BSI

• Color camera
• Monochrome camera
• High Speed Camera

Are you feeling limitations in frame rate, latency, and stability with USB or GigE cameras? Japan Bopixel's 5MP CoaXPress camera fundamentally resolves the challenges faced by traditional interfaces. With a high frame rate of up to 207.5fps*, stable uncompressed data transfer, and support for long-distance transmission, it demonstrates its true value in environments where high precision and high throughput are required. Equipped with Sony's Pregius 2nd/4th generation sensor, it enables high-speed and high-resolution imaging. By supporting PoCXP (Power over CoaXPress), it reduces the number of cables, contributing to simplified wiring. Furthermore, Japan Bopixel features an "UltraLowPowerFPGA" that differs from the majority of camera manufacturers, achieving low power consumption and low heat generation while maintaining a compact design. Users aiming to accelerate production lines, improve inspection accuracy, and save space in inspection areas can expect benefits that outweigh the costs. For those seeking "next-generation performance" from their current interface, consider replacing it with Japan Bopixel's "CoaXPress area camera." *For the 29mm square 1Lane_High-Speed Model.

• Color camera
• Monochrome camera
• High Speed Camera

The "Pregius S" series from Japan Bopixel is an industrial machine vision camera equipped with Sony's 4th generation CMOS sensor, "Pregius S." It simultaneously achieves compact size, high resolution, and high frame rates, making it ideal for next-generation inspection, measurement, and robotics applications. The "Pregius S" features a BSI (back-illuminated) structure that balances high sensitivity and low noise while being significantly smaller than previous models. This allows for the adoption of more compact optical systems even with the same pixel count, contributing to the overall miniaturization of the system and cost reduction. This series offers a diverse lineup ranging from 5.1M to 24.6MP, supporting high-speed data transfer and synchronized shooting of multiple units via the CoaXPress interface. It demonstrates its true value in applications requiring fine and high-speed image processing, such as semiconductor wafer inspection and appearance inspection of electronic substrates. The adoption of Ultra Low Power FPGA enables low heat generation and stable long-term operation. Its compact housing makes it ideal for equipment integration. *Pregius / Pregius S and their logos are registered trademarks or trademarks of Sony Group Corporation or its affiliates.*

• Color camera
• Monochrome camera
• High Speed Camera

The Rindo HF series is a 3D camera using structured light technology that is highly suitable for micron-level detection and measurement. By combining an industrial DLP projector optimized for structured lighting technology with an industrial camera, it achieves a high field of view model that maintains very high measurement stability while enabling measurements over a wide field of view. For 3D measurement, you can choose from three models tailored to various resolutions and measurement ranges.

• 3D measuring device

The Rindo HP series is a 3D camera using structured light technology that is highly suitable for micron-level detection and measurement. By combining an industrial DLP projector optimized for structured lighting technology with two industrial cameras, it achieves high-precision measurements while maintaining very high stability. You can choose from four models that cater to various resolution and measurement range requirements.

• 3D measuring device

This is an industrial DLP projector specialized in projecting patterns for high-precision 3D inspections, targeting applications such as 3D measurement, appearance inspection, and medical image processing. The OPR407 series offers a wide lineup of 20 models to choose from, including Full HD resolution options and optical design models optimized for C-mount and diagonal projection, making it ideal for solutions requiring fast and high-precision 3D inspections. It supports high-precision projection and high-speed inspections, providing high-quality projection effects through sophisticated optical and structural design.

• Lighting for image processing
• 3D measuring device
• Light source/lighting

This is an industrial DLP projector suitable for solutions requiring high-speed and high-precision 3D inspection, targeting applications such as 3D measurement, appearance inspection, and medical image processing. The OPR405 series with RGB light source is ideal for solutions that require high-speed and high-precision 3D inspection, and it also supports wide-ranging and high-precision projection as well as high-speed inspection. Its sophisticated optical and structural design minimizes thermal deformation, ensuring high-quality projection effects.

• Lighting for image processing
• 3D measuring device
• Light source/lighting

This is an industrial DLP projector suitable for solutions requiring high-speed and high-precision 3D inspection, targeting applications such as 3D measurement, appearance inspection, and medical image processing. The compact OPR305 series, which is easy to integrate, includes models that are optimal for diagonal projection and offers a wide range of options based on the projection area. It supports high-precision projection and high-speed inspection, ensuring minimal thermal deformation and high-quality projection effects through sophisticated optical and structural design.

• 3D measuring device
• Lighting for image processing
• Light source/lighting

This is a 2K line scan camera equipped with Gpixel's CMOS sensor "GL3504." It features a horizontal resolution of 2048 pixels with a 7.0×7.0µm CMOS, where the monochrome model supports single and dual line modes, and the color model supports 3-line true color output. The line rate can reach up to 172.7 kHz for the monochrome model and 44.7 kHz for the color model, making it ideal not only for industrial inspection but also for logistics and print inspection. It is equipped with mounting taps on the front and four sides, and its compact C-mount housing measures 50×50×37 mm, allowing for installation without regard to position or conditions.

• Monochrome camera
• Color camera

With the CoaXPress camera from Japan Bopixel, it is possible to significantly reduce heat generation. This is a series of area scan cameras developed for high-speed image transmission in machine vision applications using 75Ω coaxial cables. It is ideal for situations where you want to extend the cable length while consistently capturing high-resolution and high-frame-rate images. We offer a diverse lineup ranging from 0.5MP to a maximum of 65MP, and there are models available where you can choose the connector orientation from the back (straight model) or the top (angle model). The camera housing is also equipped with mounting taps, allowing it to accommodate various installation positions and conditions. Thanks to a high-reliability design featuring low power consumption, low heat generation, and excellent heat dissipation with next-generation key devices, our cameras consume less power compared to other products with the same sensor and interface, achieving one of the smallest chassis sizes in the industry without the need for additional heat dissipation items.

• Monochrome camera
• Color camera
• High Speed Camera

■Features This is a UV-compatible model equipped with Sony's CMOS sensor IMX487, featuring an 8.1MP camera. It combines global shutter capability with high-speed performance, supporting output up to 133.2fps, enabling high-quality imaging with significantly reduced noise. Thanks to the incorporation of an Ultra Low Power FPGA and excellent design technology, it achieves a compact housing with dimensions of 29mm square. Its low power consumption and excellent heat dissipation allow for use without cooling fans or heat sinks. The image size is a 2/3-inch sensor with 2.74μm pixels, compatible with C-mount while offering high resolution. With a resolution of 2848×2848 square pixels, it is an ideal model that meets the needs for miniaturization, speed, and high pixel count, combining high resolution and high speed. This UV camera can be considered for inspections in fields such as semiconductors, as well as in new areas where high speed is required.

• Color camera

■Features This is a 25MP near-infrared (NIR) camera equipped with a model that enhances the near-infrared sensitivity of Gpixel's CMOS sensor "GMAX0505," capable of capturing images at up to 150fps with CXP-12×4Lane output. With a 1.1-inch image size and a 2.5×2.5μm pixel sensor, it supports C-mount while providing high resolution. The resolution is 5,120×5,120 square pixels, combining high resolution, speed, and miniaturization to meet the demands for compactness, speed, and high pixel count. The incorporation of an Ultra Low Power FPGA and excellent design technology has achieved a compact housing with a 70mm square size, resulting in low power consumption and excellent heat dissipation, allowing for use without cooling fans or heat sinks. It is also equipped with mounting taps on the front and four sides, delivering excellent performance for various applications in factory automation. It can be utilized in a wide range of fields, including surveillance systems, food, and medical applications, where high-speed and high-pixel near-infrared imaging is required.

• Monochrome camera
• High Speed Camera

We will be exhibiting at NEPCON Japan 2026. □ Event Dates: January 21 (Wednesday) to January 23 (Friday), 2026, 10:00 AM to 5:00 PM □ Venue: Tokyo Big Sight, East Exhibition Hall [E10-37] ~ Main Exhibits ~ - 105MP/245MP ultra-high-resolution sensor equipped CoaXPress area scan camera - 10MP/14MP/21MP ultra-high-speed CoaXPress area scan camera - 8k TDI 1MHz CoaX over Fiber 100G line scan camera - 2k & 4k CoaXPress line scan camera ＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊ With the increase in speed and resolution, the power consumption and heat generation of cameras have become significant. Are you not concerned about the impact of heat on the lens affecting inspection accuracy, as well as the influence on the object and surroundings? Japan Bopixel's [low-heat CoaXPress camera] can significantly reduce heat generation as a camera by fundamentally suppressing heat, enabling the realization of a fanless, compact CoaXPress camera.

• Monochrome camera
• Technical and Reference Books
• Visual Inspection Equipment

When the camera overheats excessively, the following issues arise, directly affecting inspection accuracy. - Suppression of thermal noise (hot pixels) As the temperature of the CMOS sensor rises, dark current increases, making random noise more likely to occur. By controlling heat generation, these thermal noises can be fundamentally suppressed, improving image quality. This reduces the effort required for software noise correction and the risk of false detections. - Stabilization of the optical system Heat from the camera body can transfer to adjacent lenses and housings, causing thermal expansion. This can lead to slight variations in the focal length and imaging position of the lens, resulting in misalignment and decreased inspection accuracy in precise inspections. The lower the heat generation, the less this thermal impact, allowing for stable inspection accuracy to be maintained over extended periods. *For more details about each product, please download the catalog or feel free to contact us.*

• Monochrome camera
• Technical and Reference Books
• Visual Inspection Equipment

In cameras with significant heat generation, heat dissipation items such as heat sinks, cooling fans, or external Peltier cooling devices may be necessary. By suppressing heat generation, these additional cooling mechanisms can be eliminated, leading to overall cost reduction, space savings, and reduced maintenance efforts for the entire system. Achieving fanless operation (without cooling fans) reduces sources of vibration and dust, making it more suitable for environments such as clean rooms. At Japan Bopixel, we have successfully utilized "Ultra Low Power FPGA," which can reduce power consumption by over 50% compared to FPGAs commonly adopted by the majority of camera manufacturers, as the primary heat source in industrial cameras. By fundamentally suppressing heat generation, we can significantly reduce power consumption and heat generation as a camera, solving thermal issues with a new approach that leverages the advantages of being a latecomer in the market. *For more details, please download the catalog or feel free to contact us.*

• Monochrome camera
• Technical and Reference Books
• Visual Inspection Equipment

The transition from CCD to CMOS has accelerated the trend towards higher resolution, and the fps continues to increase, resulting in greater power consumption (and heat generation) of cameras. As a result, concerns about inspection accuracy due to thermal effects on lenses have increased, and the impact on objects and peripheral devices can no longer be ignored. At Japan Bopixel, we have successfully utilized "Ultra Low Power FPGA," which can reduce power consumption by over 50% compared to comparable FPGAs, instead of the FPGAs commonly adopted by most camera manufacturers, which are the main source of heat generation in industrial cameras. By fundamentally suppressing heat generation, we can significantly reduce the power consumption and heat of the camera, allowing us to solve thermal issues with a new approach that leverages the advantages of being a latecomer in the market. *For more details, please download the catalog or feel free to contact us.*

• Monochrome camera
• Technical and Reference Books
• Visual Inspection Equipment

The area scan camera series "CoaXPress," developed for high-speed image transmission in machine vision applications. ★About the CoaXPress Camera Interface - High noise resistance. Coaxial cables have high shielding performance against electromagnetic noise, making them less susceptible to external noise generated in factory environments, thereby improving the reliability of data transmission. - Robust connectors. Robust connectors can be used (DIN, MicroBNC). The connections are secure, and the likelihood of disconnection or contact failure due to vibration is low, making them suitable for maintenance-free, long-term operation. - Simplified heat management and thermal stability. Heat management can be simplified. As mentioned earlier, CXP cameras are highly integrated, but by using a single cable, it becomes easier to concentrate the thermal design (heat dissipation design) of the entire system, and since the cable itself is less likely to become a heat source, it contributes to the thermal stability of the camera. *We also offer demo units for loan, so please feel free to contact us.

• Monochrome camera

The area scan camera series "CoaXPress," developed for high-speed image transmission in machine vision applications. It is suitable for situations where you want to extend the cable length while stably capturing high-resolution, high-frame-rate images. - It achieves overwhelming high-speed and large-capacity transmission. CXP-6 (6.25 Gbps per lane) and CXP-12 (12.5 Gbps per lane) provide a maximum bandwidth of 50 Gbps (CXP-12 x 4 lanes) by using multiple lanes, enabling real-time transmission of ultra-high-speed and large-capacity data, such as hundreds of fps and tens of millions of pixels. *We also offer demo units for loan, so please feel free to contact us.

• Monochrome camera

The area scan camera series "CoaXPress," developed for high-speed image transmission in machine vision applications. It offers advantages in wiring and durability in movable parts such as cable carriers and robotic arms, as it can use flexible and slender coaxial cables. It is ideal for situations where you want to extend the cable length while stably capturing high-pixel, high-frame-rate images. *We also offer demo units for loan, so please feel free to contact us.

• Monochrome camera

A series of area scan cameras developed for high-speed image transmission in machine vision applications using 75Ω coaxial cables. These cameras are ideal for situations where you want to extend cable length while reliably capturing high-resolution and high-frame-rate images. They are equipped with mounting taps on the camera housing, allowing for use in various installation positions and conditions. A diverse lineup is available, ranging from 0.5MP to a maximum of 65MP, with models that allow you to choose the connector output direction from the back (straight model) or the top (angle model). By adopting an Ultra Low Power FPGA, these cameras boast low power consumption, low heat generation, and high thermal dissipation reliability. Compared to other products with the same sensor and interface, they consume less power and achieve a compact body size that is among the smallest in the industry, allowing for use without additional heat dissipation items. *Please download the catalog for product specifications. *We also offer demo units for loan, so feel free to contact us.

• Monochrome camera

A series of line scan cameras developed for high-speed image transmission in machine vision applications, using 75Ω coaxial cables, featuring the digital interface "CoaXPress." Centered around high-speed, high-resolution sensors, this series offers a powerful lineup that is ideal for stably capturing high-pixel, high-line-rate images while extending cable lengths. The camera housing is also equipped with mounting taps to accommodate various installation positions and conditions. Thanks to next-generation key devices that provide low power consumption and low heat generation, along with a highly reliable design boasting excellent heat dissipation, the power consumption is lower compared to similar products with the same sensor and interface from other manufacturers. Despite its compact housing size, it can be used without additional heat dissipation items. *For product specifications, please download the catalog. *We also offer demo units for loan, so feel free to contact us.

• Monochrome camera
• Color camera
• High Speed Camera

In a security monitoring system, high-quality images that cover a wide area while capturing details clearly are essential. Particularly, high resolution and fast frame rates are crucial for accurately understanding the movements of people and vehicles and for early detection of anomalies. This product achieves both high resolution and speed while being compact, allowing for detailed capture of every corner of the monitored area. This enhances the performance of the monitoring system and significantly raises the security level. 【Usage Scenarios】 - Monitoring in public spaces such as airports, stations, and commercial facilities - Strengthening security in industrial facilities like factories and warehouses - Traffic monitoring in parking lots and on roads 【Benefits of Implementation】 - Improved identification accuracy of individuals and vehicles due to high resolution - Clear capture of fast-moving subjects thanks to high frame rates - High installation flexibility and unobtrusive monitoring due to the compact design - Reduced wiring costs and installation effort with PoCXP compatibility

• Color camera
• Monochrome camera
• High Speed Camera

In the robotics industry, accurate position recognition of robots is essential for improving work efficiency and ensuring safety. Particularly in tasks involving fast-moving objects or working in confined spaces, high-precision image processing and fast data transfer are required. Traditional cameras often face bottlenecks in size and processing speed, making accurate position recognition difficult. Our compact CoaXPress area camera addresses these challenges. 【Usage Scenarios】 - Parts pickup by robotic arms - Position detection of mobile robots - Automated inspection systems 【Benefits of Implementation】 - Accurate position recognition through high-speed image processing - Increased flexibility in installation locations due to miniaturization - High-speed data transfer via CoaXPress interface - Accurate recognition of details due to high resolution

• Color camera
• Monochrome camera
• High Speed Camera

■Features A 1Lane area scan camera series composed of 8 types of resolutions from SONY's CMOS Pregius 3rd and 4th generations. This is one of the smallest class CoaXPress cameras in the industry, achieving a 29mm square housing while utilizing next-generation key devices and excellent design technology, all with CXP-12 output. We offer a standard model equipped with a Normal Speed sensor and a high-speed model equipped with a High Speed sensor, providing a total of 33 models ranging from 0.5MP to 24.6MP. The top and bottom surfaces of the housing are equipped with mounting taps, and since it supports a 1Lane connector and PoCXP, it reduces wiring stress and minimizes the impact on the installation environment. Compact yet highly efficient, it is ideal for replacement from other interfaces and as an option for next-generation devices.

• Color camera
• Monochrome camera
• High Speed Camera

■Features This is a 40×40mm 1Lane camera series equipped with the widely adopted Sony Pregius 2nd generation sensor with a pixel size of 3.45×3.45µm. It offers a lineup of four resolutions (3.2MP/5MP/8.9MP/12.3MP) and is a model that achieves excellent low noise along with the high speed and precision of a global shutter. We have prepared a versatile CXP-6×1 lane model and a CXP-10×1 lane model that realizes the fastest frame rate of the sensor. The connector orientation can be selected from the rear (straight model) or the top (angle model), and it is equipped with mounting taps on the front and four sides, allowing for consideration based on the usage environment.

• Monochrome camera
• Color camera
• High Speed Camera

■Features This is a 60mm square 4Lane camera series equipped with the SONY Pregius S (16.2MP/20.4MP/24.6MP) sensor. The Pregius S, which is the fourth generation of the Pregius series, is a new generation sensor that achieves high resolution while maintaining high sensitivity due to its back-illuminated structure. It features a compact 60mm square housing design and combines high speed, high sensitivity, and high resolution, delivering excellent imaging performance. We offer a versatile CXP-6×4 lane model and a CXP-10×4 lane model that achieves the fastest frame rate of the sensor. You can choose the connector orientation from the rear (straight model) or the top (angle model), and it is equipped with mounting taps on the front and four sides, allowing you to consider it according to your usage environment.

• Color camera
• Monochrome camera
• High Speed Camera

■Features This 65MP camera is equipped with Gpixel's CMOS sensor GMAX3265 and can achieve imaging at up to 71fps with CXP-12×4Lane output. It combines high resolution and speed, and thanks to the incorporation of an Ultra Low Power FPGA and excellent design technology, it achieves one of the smallest chassis sizes in the industry. With low power consumption and excellent heat dissipation, it can be used without cooling fans or heat sinks. We offer a versatile CXP-6×4 lane model and a CXP-12×4 lane model that achieves the fastest frame rate of the sensor, both delivering outstanding performance. The front and four sides are equipped with mounting taps, and the connector output direction can be selected from the rear (straight model) or the top (angle model), so please consider according to your usage environment.

• Color camera
• Monochrome camera

■Features Equipped with Gpixel's CMOS sensor GMAX0505, this 25MP camera can capture images at up to 150fps with CXP-12×4Lane output. With a 1.1-inch image size and a 2.5×2.5μm pixel sensor, it supports C-mount while offering high resolution. The resolution is 5,120×5,120 with square pixels, making it an ideal model that combines high resolution and speed to meet the demands for miniaturization, high speed, and high pixel count. Thanks to the incorporation of an Ultra Low Power FPGA and excellent design technology, it achieves a compact housing with dimensions of 70mm square. Its low power consumption and excellent heat dissipation allow it to be used without cooling fans or heat sinks. It is also equipped with mounting taps on the front and four sides, providing excellent performance for various applications in factory automation. A near-infrared (NIR) compatible model is also available, suitable for a wide range of fields including food, medical, and surveillance systems.

• Monochrome camera
• Color camera

In the glass industry, detecting surface scratches and foreign objects is essential to ensure product quality. Particularly in glass used for automobiles and displays, even minor scratches or foreign objects can compromise the product's performance and appearance. The 16K line scan camera accurately captures fine scratches and foreign objects on glass surfaces with its 16K high resolution and a maximum line rate of 120kHz, enabling high-speed inspection. 【Application Scenarios】 - Scratch inspection of glass products - Foreign object contamination inspection - Processes requiring high-speed line scan inspection 【Benefits of Implementation】 - Detailed inspection enabled by high resolution - Reduced inspection time due to high-speed scanning - Improved quality control and yield enhancement

• Monochrome camera
• Defect Inspection Equipment
• Color camera

In the printing industry, color proofing requires accurate color reproduction and fast inspection. Color variations and ink misalignment that affect the quality of printed materials not only decrease customer satisfaction but also lead to increased costs due to correction work. The 16K line scan camera, with its 16K high resolution and a maximum line rate of 120kHz, captures the details of printed materials accurately, enabling fast color proofing. 【Usage Scenarios】 - Color proofing inspection of printed materials - Inspection of ink density and color variations - Printing processes that require high-speed line scan inspection 【Benefits of Implementation】 - Detailed inspection made possible by high resolution - Reduction in inspection time due to fast scanning - Improvement in quality control and cost reduction

• Monochrome camera

■Features A 16K line scan camera equipped with Gpixel's CMOS sensor GL3516. With a horizontal resolution of 16384 pixels and a 3.5×3.5µm CMOS, it can achieve a line rate of up to 120kHz, making it ideal for fields that require high-speed scanning at 16K resolution. Its compact housing design measures 77mm square and is equipped with mounting taps on the front and four sides, ensuring ease of installation regardless of position or conditions.

• Monochrome camera

■Features This is a super high-speed, high-sensitivity 9k TDI line scan camera equipped with GPixel's CMOS sensor GLT5009BSI. It has a horizontal resolution of 9072 pixels with a 5×5μm back-illuminated CMOS, capable of capturing images at a maximum of 526kHz when using CXP-12×4Lane output. With both 256-stage and 32-stage TDI transfer options, there is no need for expensive high-intensity lighting that requires cumbersome maintenance, allowing for a reduction in total costs. It is ideal for high-speed imaging in low-light conditions, inspection of large objects, and applications that require even higher speed and sensitivity than existing line scan cameras.

• Monochrome camera
• High Speed Camera