ラクテム List of Products and Services

We offer two types: UNF (coarse thread) and UNF (fine thread). They are finished to be approximately 30% to a maximum of 65% thinner than commercially available products, allowing for space-saving use. The hexagonal opposite sides are not in inch standards, so general metric wrenches can be used. Using double nuts is also effective for preventing loosening.

• nut

We offer two types: UNF (coarse thread) and UNF (fine thread). They are finished to be approximately 30% to a maximum of 65% thinner than commercially available products, allowing for space-saving use. The hexagonal opposite sides are not in inch standards, so you can use a standard metric wrench. Using double nuts is also effective for preventing loosening.

• nut

Conversely, you can increase the size by attaching it to the female thread. There is a slotted groove for easier tightening.

• nut

By attaching this product to the male thread, you can reduce the size (e.g., from M6 to M4). By attaching a male thread on the opposite side, you can increase the size (e.g., from M4 to M6).

• nut

By attaching this product to the screw, you can reduce the size (e.g., from M6 to M4). Conversely, by inserting this product into the screw hole, you can increase the size (e.g., from M4 to M6).

• nut

It is possible to remove the display without repeatedly inserting and removing push pins. It can hold the display without making holes in it. The push pins and magnets are the same shade of silver.

• Office supplies and stationery

By applying it to areas where magnetization is needed, it is possible to attach magnets anywhere. It can be used outdoors and indoors, and it employs high-performance, high-quality 3M double-sided tape.

• magnet
• Other machine elements

It has high peeling strength that absorbs rebound force without leaving residual stress. It is highly weather-resistant and can be used both indoors and outdoors. It is effective for items that are cut vertically or when only a small number of pieces are needed.

• Adhesive tape

The installation direction can be adjusted 360 degrees. For non-ferrous materials, wood, tiles, etc., please consider purchasing the separately sold [magnet mounting plate with double-sided tape]. Using the included anti-slip rubber will prevent scratches and make it less likely to slip off.

• Piping Materials

This is a cost-effective black-coated steel product.

• nut

There are a total of 5 sizes available, and you can choose from 3 colors for each size.

• Other machine elements

There are a total of 5 sizes available, and you can choose from 3 colors for each size.

• Other machine elements

There are a total of 7 sizes available, and you can choose from 3 colors for each.

• Other machine elements

Made of stainless steel, it has excellent rust resistance and weather resistance. There is also a bolt type for the mounting part.

• nut

It can be fixed by attaching it to the screw hole. By using the included hex nut and flat washer, it can also be installed in places other than the screw hole. This saves you the trouble of selecting and purchasing flat washers and hex nuts, allowing for immediate installation after purchase. Made of stainless steel, it has excellent rust resistance and weather resistance. There are also nut-type mounting options available in the lineup.

• bolt

The surface is available in two types: matte and glossy aluminum, and you can choose from six different sizes. The back features a removable and strong adhesive double-sided tape.

• Adhesive tape

You can choose from 11 different types of handles. This product is made entirely of stainless steel.

• Other machine elements

You can choose from 11 different types of handles. This product is made of all stainless steel.

• Other machine elements

You can choose from five types of handles. By attaching the included rubber to the magnetic surface, it prevents scratches and makes it less likely to slip off.

• Other machine elements

You can choose from 11 different types of handles. By attaching the included rubber to the magnetic surface, it prevents scratches and makes it less likely to slip off.

• Other machine elements

By inserting into existing Unified Fine (UNF) screw holes, it can be converted to metric coarse screw holes. You can use domestic standard screws for imported items and other inch or Unified standard holes. It has a hex head type, making it easy to tighten with a wrench or similar tool. There is also a type with an outer diameter of Unified Coarse (UNC).

• Other machine elements
• bolt
• nut

By inserting into existing Unified Coarse (UNC) screw holes, it can be converted to metric screw holes. It allows the use of domestic standard screws for inch and Unified standard holes, such as imported products. The hex head type makes it easy to tighten with a wrench or similar tool. There is also a type with an outer diameter of Unified Fine (UNF).

• Other machine elements
• bolt
• nut

When you grip the lever, the magnetic force decreases, and after attaching it to the workpiece, you can release the lever to enable suction. It can be handled with one hand, making it easy to use for anyone.

• High-power magnetic separator, magnetic filter
• lift
• Other machine elements

Due to the hexagonal hole on the end face, if you are concerned about the loosening of the screw, re-tightening is also effective. When tightened, the brass pad can come into contact with the counterpart and secure it. Additionally, since it is made of brass, it can hold the counterpart without causing any damage. There are also resin material options available for the tip pad.

• bolt

Since there is a hexagonal hole on the end face, those who are concerned about screw loosening can effectively tighten it further. When tightened, the resin pad makes contact with the counterpart and can secure it in place. Additionally, because it is made of resin material, it can hold the counterpart without causing any damage. There is also a lineup of brass material for the tip pad.

• bolt

The end surface will have a hairline finish.

• nut

The end face has a hairline finish. We also offer products with brass and resin pads at the tip to prevent scratches.

• bolt

You can choose from black or gray colors for sizes M4 to M20. Due to the processing method, particularly larger sizes may have noticeable flow patterns on their appearance. Although they are manufactured within JIS standards, there may be cases where the hexagonal dimensions on the mounting side are loose. If they are loose, please adjust them using tape or similar methods before use.

• fastener

You can choose from two colors, black and white, for sizes M3 to M20. By twisting the cap while inserting it, you can push it all the way in. If the screw hole is shallow, the cap may float. In that case, please cut the L size for use. Since it is made of silicone rubber, it can be inserted even with a slightly narrow inner diameter.

• fastener

It is also effective for safety and identification after fixation.

• Other machine elements

By installing it, you can achieve dust prevention, identification, and injury prevention effects. We offer two colors, black and white, and a wide variety of installation sizes.

• Other machine elements

The head part is minimized in thickness, making it a space-saving and compact design. By inserting a commercially available screw and pulling it up, you can pull the main body out of the hole. Using the separately sold [Ball Lock Pin Removal Tool] makes it smoother. This product cannot be pulled out without a screw, making it effective for preventing tampering. Due to its short installation length, it is also effective for securing thin plates (flat bars) and the included protective seal can be attached to the screw hole for dust prevention. This product is made of all stainless steel.

• Other machine elements

It comes with a ring, allowing for smooth extraction. After extraction, it can be stored with the ring attached. This product is made of all stainless steel.

• fastener

It is a resin cap that protects the ends of screws and rod-shaped objects. You can cut it freely, making it easy to adjust the length. It is made of a material that has excellent chemical resistance, water resistance, and electrical insulation, and it is flexible.

• bolt

The main body and the threaded part do not rotate, but you can adjust the installation length and the orientation of the ring using a hex nut. Unlike general eye bolts, the ring moves freely. This product is made of all stainless steel.

• Other machine elements
• bolt

Compared to general similar-shaped products, the magnet is larger and has a stronger adhesive force. It comes with a hex nut, allowing for height adjustment and use even without a screw hole.

• Other machine elements

Compared to general similar-shaped products, the size of the magnet is larger and the adhesive force is stronger. Since the screw hole is not through, there is no worry about hitting the magnet when tightening.

• Other machine elements

The inner diameter has a fine thread hole, but coarse threads are also available in the lineup. It has a structure that tightens with a toothed washer and a hex nut without using a special tool. When using the included toothed washer, you can use it without worrying about loosening. Since it is a hex head type, it can be easily tightened with a wrench or similar tool.

• nut
• bolt

It has a hexagonal head type, so it can be easily tightened with a wrench or similar tool. Additionally, by using hex nuts and spring washers, it can also be installed on thin plates (with round holes).

• Other machine elements
• bolt

Since it is made of resin material, it can hold the object securely without scratching it. The knob is available in two colors, white and black, and the tip pad is also available in brass material.

• bolt
• fastener

Since it is made of brass, it can hold objects securely without scratching them. The knob is available in two colors, white and black, and the tip pad is also available in resin material.

• bolt
• fastener

Since it is made of resin material, it can hold the object firmly without scratching it. The knob is available in two colors, white and black, and the tip pad is also available in brass material.

• bolt
• fastener

Since it is made of brass, it can hold objects firmly without scratching them. The knob is available in two colors, white and black, and the tip pad also comes in a resin material option.

• bolt
• fastener

The resin part is available in two colors: white and black.

• nut

It can be easily inserted and removed, making it user-friendly and accessible for anyone. Its short installation length also makes it effective for securing thin plates (flat bars) and similar materials.

• Other machine elements