ラクテム Product Lineup

The main body and the threaded part do not rotate, but you can adjust the installation length and the orientation of the ring using a hex nut. Unlike general eye bolts, the ring moves freely. This product is made of all stainless steel.

• Other machine elements
• bolt

Compared to general similar-shaped products, the magnet is larger and has a stronger adhesive force. It comes with a hex nut, allowing for height adjustment and use even without a screw hole.

• Other machine elements

Compared to general similar-shaped products, the size of the magnet is larger and the adhesive force is stronger. Since the screw hole is not through, there is no worry about hitting the magnet when tightening.

• Other machine elements

The inner diameter has a fine thread hole, but coarse threads are also available in the lineup. It has a structure that tightens with a toothed washer and a hex nut without using a special tool. When using the included toothed washer, you can use it without worrying about loosening. Since it is a hex head type, it can be easily tightened with a wrench or similar tool.

• nut
• bolt

It has a hexagonal head type, so it can be easily tightened with a wrench or similar tool. Additionally, by using hex nuts and spring washers, it can also be installed on thin plates (with round holes).

• Other machine elements
• bolt

Since it is made of resin material, it can hold the object securely without scratching it. The knob is available in two colors, white and black, and the tip pad is also available in brass material.

• bolt
• fastener

Since it is made of brass, it can hold objects securely without scratching them. The knob is available in two colors, white and black, and the tip pad is also available in resin material.

• bolt
• fastener

Since it is made of resin material, it can hold the object firmly without scratching it. The knob is available in two colors, white and black, and the tip pad is also available in brass material.

• bolt
• fastener

Since it is made of brass, it can hold objects firmly without scratching them. The knob is available in two colors, white and black, and the tip pad also comes in a resin material option.

• bolt
• fastener

The resin part is available in two colors: white and black.

• nut

It can be easily inserted and removed, making it user-friendly and accessible for anyone. Its short installation length also makes it effective for securing thin plates (flat bars) and similar materials.

• Other machine elements

It comes with a ball chain and ring to prevent it from falling off, which is also effective for preventing loss. It can be easily inserted and removed, making it user-friendly for anyone. Due to its short installation length, it is also effective for securing thin plates (flat bars) and similar items.

• Other machine elements

It can be easily inserted and removed, making it user-friendly and accessible for anyone. Due to its short installation length, it is also effective for securing thin plates (flat bars) and similar materials.

• Other machine elements

This structure is tightened with a toothed washer and a hex nut without using special tools. By using the included toothed washer, you can use it without worrying about loosening. Since it has a hex head type, it can be easily tightened with a wrench or similar tool.

• nut
• bolt

The nuts, chains, rings, and fittings are made of all stainless steel. The length of the chain can be selected from 7 sizes according to the intended use.

• nut
• Chains and sprockets

The main body is made of resin material, so there is no worry about rust. The neodymium magnets are also covered with rubber material, designed to prevent damage and breakage.

• Other machine elements

The main body is made of resin material, so there is no worry about rust. The neodymium magnets are also covered with rubber material, designed to prevent damage and breakage.

• Other machine elements

It has a hexagonal head type, so it can be easily tightened with a wrench or similar tool. Additionally, by using hex nuts and spring washers, it can also be installed on thin plates (with round holes).

• Other machine elements
• bolt

Magnets can be selected based on their adhesive strength and size, and the lever is available in three colors. The neodymium magnet is covered with an iron cap to enhance its magnetic force while making it less prone to breaking. By attaching the included anti-slip rubber to the magnetic surface, it prevents scratches and provides a non-slip effect.

• Other machine elements
• bracket

Since it is made of resin material, it can hold objects without scratching them. The knob is available in two colors, white and black, and the tip pad is also available in brass material.

• bolt
• fastener

Since it is made of resin material, it can hold objects without scratching them. The knob is available in two colors: white and black, and the tip pad is also available in brass material.

• bolt
• fastener

Since it is made of brass, it can hold objects securely without scratching them. The knob is available in two colors, white and black, and the tip pad also comes in resin material options.

• bolt
• fastener

Since it is made of brass, it can hold objects firmly without scratching them. The knob is available in two colors, white and black, and the tip pad is also available in resin material.

• bolt
• fastener

When tightened, the resin pad can come into contact with the counterpart and secure it. Additionally, since it is made of resin material, it can hold the counterpart without causing any damage. There is also a lineup of brass material for the tip pad.

• bolt
• fastener

When tightened, the brass pad can make contact with the counterpart and secure it in place. Additionally, since it is made of brass, it can hold the counterpart firmly without causing any damage. There are also resin material options available for the tip pads.

• bolt
• fastener

The resin part is available in two colors: white and black.

• nut

By placing a grommet between the magnet and the washer, it can be used in areas where magnetization is present. The neodymium magnet is covered with a metal cap to enhance its adhesive force and prevent damage. By attaching anti-slip rubber to the magnet, it becomes less likely to slip off and also helps prevent scratches and damage to both the magnet and the mounting side.

• Other machine elements

The opposite side of the magnet has a hexagonal hole, allowing it to be tightened and removed with a hex wrench. Sizes range from small diameter M4 to a maximum of M16. Due to its short overall length, it can also be installed on thin plates.

• Other machine elements

Instead of using a general ferrite magnet sheet, we have adopted a powerful neodymium magnet. By attaching round neodymium magnets to the four corners of the card case, it is securely fixed and can be displayed. The thickness of the neodymium magnet is about 3mm, which allows it to stand out from the mounting surface, enhancing its appearance and making removal smooth. By applying non-slip rubber to the magnet, it is less likely to slip off, and it also helps prevent scratches and damage to both the magnet and the mounting surface. The card case has a thickness of about 0.5mm, making it resistant to bending and effectively protecting its contents.

• Office supplies and stationery

The hook-and-loop fastener (bonding Velcro) can be freely adjusted in length. It can be fixed with the included tapping screws, allowing it to be attached to wood, walls, and more.

• Other packaging materials

The hook-and-loop fastener (binding Velcro) can be freely adjusted in length. It can be attached with magnets without the need for screws, and the mounting hardware can securely hold the opposing object. To enhance the adhesive strength compared to a single neodymium magnet, the magnet is covered with a cap. By attaching the included anti-slip rubber to the adhesive surface, it provides scratch prevention and anti-slip effects.

• Other machine elements
• Other packaging materials

The magnets come in four types with different sizes and suction strengths, allowing you to choose between left and right. The bracket can be adjusted to a 180-degree angle. By using the included knob, you can adjust the angle by hand (without tools). If you want to tighten it further, remove the knob and spacer, and use the included cross-recessed flat screws. Attaching the included anti-slip rubber to the magnet also helps prevent scratches.

• Other machine elements

It can be used in various situations such as hanging or holding objects. To enhance the adhesive force compared to a standalone neodymium magnet, the magnet is covered with a cap. By attaching the included non-slip rubber to the adhesive surface, it provides scratch prevention and a non-slip effect.

• Other machine elements
• magnet

It can be used in various situations such as hanging or holding objects. To enhance the adhesive force compared to a single neodymium magnet, the magnet is covered with a cap. By attaching the included anti-slip rubber to the adhesive surface, it provides a scratch prevention effect.

• Other machine elements
• magnet

It can be used in various situations such as hanging or holding objects. To enhance the adhesive force compared to a standalone neodymium magnet, the magnet is covered with a cap. By attaching the included anti-slip rubber to the adhesive surface, it provides a scratch prevention effect.

• Other machine elements
• magnet

When using the included plate screws, please check the hexagonal dimensions and tighten them with a hex wrench. By attaching the included anti-slip rubber to the contact surface, it provides scratch prevention and anti-slip effects.

• Other machine elements

When using the included plate screws, please check the hexagonal dimensions and tighten them with a hex wrench. By attaching the included anti-slip rubber to the contact surface, it provides scratch prevention and anti-slip effects.

• Other machine elements

The magnet side has a hexagonal hole, allowing it to be tightened with a hex wrench. By attaching the included anti-slip rubber to the adhesive surface, it provides scratch prevention and slip resistance.

• Other machine elements

A product that comes with non-slip rubber, which can be attached to the adhesive surface to prevent scratches and provide a non-slip effect.

• Other machine elements

By applying double-sided tape to the magnet, it can be used without adhesive. By attaching anti-slip rubber, it prevents scratches and makes it less likely to slip off.

• Other machine elements

When using the included plate screws, please check the hexagonal width and tighten them with a hex wrench. By attaching the included non-slip rubber to the contact surface, you can prevent scratches and provide a non-slip effect. If you prefer a stronger magnet, please choose the neodymium cap magnet.

• Other machine elements

When using the included plate screws, please check the hexagon width and tighten them with a hex wrench. By attaching the included anti-slip rubber to the contact surface, it provides scratch prevention and anti-slip effects. If you desire a stronger magnet, please choose the neodymium cap magnet.

• Other machine elements

There is a slight gap between the magnet and the hex bolt, allowing the magnet (φD) part to rotate freely. By using the separately sold [bracket for horizontal and vertical types with hex nut], it can be installed in various orientations. By attaching the included anti-slip rubber to the contact surface, it provides scratch prevention and anti-slip effects.

• Other machine elements

By attaching the included anti-slip rubber to the adhesive surface, it provides scratch prevention and anti-slip effects.

• Other machine elements

To enhance the adhesive force compared to a standalone neodymium magnet, the magnet is covered with a cap. By attaching the included non-slip rubber to the adhesive surface, it provides scratch prevention and a non-slip effect.

• Other machine elements