東洋テクニカル List of Products and Services

This is a paste-like silver brazing material mixed with metal, flux, and binder from FUSION Inc. in the United States. Not only does it not require pre-flux, but being in paste form allows for application in one step, flowing into joints through capillary action. Additionally, it is easy to dispense in precise amounts with a dispenser, ensuring speed, accuracy, and reproducibility. Automation of silver brazing can be achieved when combined with a little torch or high-frequency brazing equipment. Moreover, when performing silver brazing on small workpieces, it can also be done using our NC heater (hot air heater), which minimizes thermal damage compared to a burner. It is utilized in the manufacturing of medical-related devices and research at universities, and its paste form helps reduce the burden on operators. - STL-1205F-653 (equivalent to BAg-7, with good flow and wetting properties) - STN-1260F-650 (for brazing of hard materials) We offer two types of paste for atmospheric use. *Please note that the main component, silver, and the base metal are experiencing price surges, and the quoted prices are subject to constant fluctuations.*

• Other metal materials

We would like to introduce the "100V-650W Series (NCH Type)" that we handle. To minimize contamination caused by copper adhesion, as seen in the drying process of semiconductor silicon wafers, it is essential that there are no exposed copper wires in the air passage. Additionally, we can manufacture custom products using nickel wires instead of copper wires. For medical devices and other ultra-small component materials, we offer silver brazing, soldering, and deburring. Our products range from small capacities of AC100V-100W to large capacities of 200V-3KW, and we can custom manufacture heaters according to your desired capacity (W), outer shape, specified dimensions, materials, and glass tube shape. *For more details, please refer to the PDF document or feel free to contact us.

• Wafer

This product is a very compactly designed controller that solves the issues of weight and size associated with conventional winding-type slide power regulators. The rated currents are 10A, 20A, and 40A, with power supply options of AC100V and AC200V. Please feel free to contact us if you have any inquiries. 【Specifications】 ■ Rated Current: 10A, 20A, 40A ■ Power Supply: AC100V, AC200V ■ Dimensions: 70(W)x150(H)x190(D) *For more details, please refer to the PDF document or feel free to contact us.

• controller

The HC-5 is an ultra-compact panel-mounted controller that fits perfectly in the palm of your hand. When combined with the flow control unit FC-2, its applications greatly expand. Please feel free to contact us when you need assistance. 【Specifications】 ■ Power supply: AC100V/5A ■ Weight: 150g ■ Dimensions: 60(W)x40(H)x50(D) *For more details, please refer to the PDF document or feel free to contact us.

• controller

We would like to introduce the "200V-1KW Series (NCH Type)" that we handle. It can be used for various applications such as soldering surface mount components, as a heat source for thermoplastic resin riveting, heating liquids, drying processes for semiconductor silicon wafers, silver brazing for ultra-small components in medical devices, and deburring. Our products can be custom-made with desired heater capacity (W), dimensions, specified sizes, materials, and glass tube shapes, ranging from small capacities of AC100V-100W to large capacities of 200V-3KW. 【Product Lineup】 ■ SUS BASE & LONG, MIDDLE SHEATH NCH-IML (200/1000) ■ SUS BASE & LONG, MIDDLE SHEATH NCH-IIML (200/1000) ■ SUS BASE & LONG, MIDDLE SHEATH NCH-IIIMM (200/1000) *For more details, please refer to the PDF materials or feel free to contact us.

• Other heaters

We would like to introduce the "100V-650W Series (NCH Type)" that we handle. It can be used for various applications such as heating for heat shrink tubes, heating for air-core coil winding machines, and silver brazing of medical device components. This product can be manufactured from a single unit based on your specifications for heater capacity (W), dimensions, materials, and glass tube shape, ranging from small capacities of AC100V-100W to large capacities of AC200V-3KW. 【Lineup (Excerpt)】 ■ CERAMIC BASE NCH-IN (100/650) ■ CERAMIC BASE NCH-IIN (100/650) ■ CERAMIC BASE NCH-IIIN (100/650) ■ SUS BASE & LONG, MIDDLE SHEATH NCH-IML (100/650) ■ SUS BASE & LONG, MIDDLE SHEATH NCH-IIML (100/650) ■ SUS BASE & LONG, MIDDLE SHEATH NCH-IIIMM (100/650) *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters

We would like to introduce the "100V-350W Series (NCH Type)" that we handle. It can be used for various applications such as preheating before printing in can manufacturing, heating for thermal fusion of air-core coils in winding machines, heating and drying of adhesives, drying processes for semiconductor silicon wafers, silver brazing for ultra-small components in medical devices, and deburring. Our products can be custom-made with heater capacities (W) ranging from small capacities of AC100V-100W to large capacities of 200V-3KW, according to your desired specifications for shape, dimensions, materials, and glass tube shapes. 【Product Lineup (Excerpt)】 ■ CERAMIC BASE NCH-IN (100/350) ■ CERAMIC BASE NCH-IIN (100/350) ■ CERAMIC BASE NCH-IIIN (100/350) ■ SUS BASE & LONG, MIDDLE SHEATH NCH-IML (100/350) ■ SUS BASE & LONG, MIDDLE SHEATH NCH-IIML (100/350) ■ SUS BASE & LONG, MIDDLE SHEATH NCH-IIIML (100/350) *For more details, please refer to the PDF materials or feel free to contact us.

• Other heaters

We would like to introduce the "NC Heater (Mini Type)" that we handle. It is suitable for preheating before printing on cans, heating thermal fusion wires for winding machines such as air-core coils, and heating and drying adhesives. Please feel free to contact us when you need assistance. 【Applications (excerpt)】 ■ Soldering of surface mount type components ■ Heat source for heat shrink tubing ■ Heat source for crimping thermoplastic resins ■ Preheating before printing on cans ■ Heating thermal fusion wires for winding machines such as air-core coils ■ Heating and drying adhesives *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters

We would like to introduce our insulation coating stripper, the 'WR-90'. It is designed with a small roll diameter, allowing for stripping even at the edges of coils and similar items. Additionally, by changing the roll, it can accommodate a wide range of wire diameters. Please feel free to contact us when you need assistance. 【Features】 ■ Insulation coating stripper for enamel, polyester wire, etc. ■ Lightweight and compact design, suitable for tabletop use ■ Capable of stripping ultra-fine wires with a diameter of 0.03mm ■ Uses a small diameter tapered glass wool brush *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

We would like to introduce the "replacement blades" for the insulation film stripper ABISOFIX that we handle. We offer three types: Type 1 (0.35mmφ to 1.50mmφ), Type 3 (0.50mmφ to 2.60mmφ), and Type 5 (1.50mmφ to 3.80mmφ). Please feel free to contact us when you need to place an order. 【Types】 ■ Type 1: 0.35mmφ to 1.50mmφ ■ Type 3: 0.50mmφ to 2.60mmφ ■ Type 5: 1.50mmφ to 3.80mmφ *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

We would like to introduce our insulation coating stripper, "ABISOFIX." It is a tabletop model with a compact design, making it easy to operate. We offer various specifications depending on the wire diameter used. Replacement blades are also available. Please feel free to contact us when you need assistance. 【Features】 ■ Ideal for stripping enamel wire ■ Tabletop model with a compact design for easy operation *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

The SCU-843S is a device that collects slag at the corner of the solder pot in a semi-automatic manner, maintaining a clean state on the surface of the still pot at all times. Power consumption is AC100V-6W, and the scraping speed is MAX198mm/s. Please feel free to contact us when you need assistance. 【Specifications】 ■ Power: AC100V-6W (AC200V version is also available) ■ Scraping speed: MAX198mm/s ■ Dimensions: 137 x 500 x 160H ■ Product weight: 8.5kg *For more details, please refer to the PDF document or feel free to contact us.

• Solder

The SCU-125S is a device that collects slag at the corner of the solder pot in a semi-automatic manner, maintaining a clean state on the surface of the stationary pot at all times. Power: AC100V-6W, scraping speed: MAX 198mm/s. Please feel free to contact us when you need assistance. 【Specifications】 ■ Power: AC100V-6W (AC200V version also available) ■ Scraping speed: MAX 198mm/s ■ Dimensions: 227 x 350 x 153H *For more details, please refer to the PDF document or feel free to contact us.

• Solder

We would like to introduce our soldering elevation device, the 'SG-87DSE'. It allows for soldering of SMD leads in one cycle. The half-turn function is performed by an actuator, and the angle can be adjusted. Please feel free to contact us when you need assistance. 【Specifications】 ■ Power: AC100V-36W ■ Up and down stroke: MAX 60mm ■ Descending speed: 10–65mm/s ■ External dimensions: 320x370x350H ■ Product weight: 19kg * For more details, please refer to the PDF document or feel free to contact us.

• Solder

We would like to introduce our soldering elevation device, the 'SG-87DS'. It features a two-stage stop during descent with a preheat function. With a two-stage touch sensor, the descent speed is variable between two speeds. Additionally, the rear sliding function removes flux residue. Please feel free to contact us when you need assistance. 【Specifications】 ■ Power: AC100V-36W ■ Up and down stroke: MAX 60mm ■ Descent speed: 10–65mm/s ■ External dimensions: 320x260x350H ■ Product weight: 15kg *For more details, please refer to the PDF document or feel free to contact us.

• Solder

We would like to introduce our "Soldering Elevation Device." Due to its semi-automatic nature, the finish is stable. Additionally, the liquid level is detected by a touch sensor, ensuring accuracy. Please feel free to contact us when you need assistance. 【Features】 ■ The liquid level is accurately detected by a touch sensor ■ Capable of handling a variety of small quantities ■ Stable finish *For more details, please refer to the PDF document or feel free to contact us.

• Solder

We would like to introduce our solder pump 'SHP-107'. The power is AC100V/15W, and the discharge amount is 60kg/50min (50Hz). It quickly extracts the melted solder in a short time. The operation is very simple. Please feel free to contact us when you need assistance. 【Specifications】 ■ Power: AC100V/15W ■ Discharge amount: 60kg/50min (50Hz) ■ Product weight: 370g * For more details, please refer to the PDF document or feel free to contact us.

• Solder
• Other pumps

We would like to introduce our jet soldering pot 'HFU-1S'. The power is AC100V/6W, and the flow rate is variable from 0 to 28 kg/m. It becomes a jet device when combined with the SG-1S. Please feel free to contact us when you need assistance. 【Specifications】 ■ Power: AC100V/6W ■ Flow rate: Variable from 0 to 28 kg/m ■ Nozzle: 20x20 mounted ■ External dimensions: 220(W)x330(H)x280(D) ■ Product weight: 4.7kg *For more details, please refer to the PDF document or feel free to contact us.

• Solder

We would like to introduce our cast iron soldering pot 'SG-142SF'. It is suitable for large-scale processing of thick wires and for printed circuit boards. Additionally, the dimensions of the pot are 140x200x50 deep, and the solder usage is 9kg. Please feel free to contact us when you need assistance. 【Specifications】 ■ Power: AC100V/1500W ■ Pot dimensions: 140x200x50 deep ■ Dimensions: 230(W)x280(H)x145(D) ■ Solder usage: 9kg ■ Product weight: 12kg ■ Temperature control: Separate PID temperature control *For more details, please refer to the PDF document or feel free to contact us.

• Solder

We would like to introduce our cast iron soldering pot 'SG-2SF'. It is suitable for dip soldering of lead frames. The tank dimensions are 60x300x25 deep, and the solder usage is 3.5kg. Please feel free to contact us when you need assistance. 【Specifications】 ■ Power: AC100V/1600W ■ Tank dimensions: 60x300x25 deep ■ Dimensions: 230(W)x425(H)x130(D) ■ Solder usage: 3.5kg ■ Product weight: 1.2kg ■ Temperature control: Separate PID temperature control * For more details, please refer to the PDF document or feel free to contact us.

• Solder

We would like to introduce our ceramic soldering pot 'SG-843S'. It is suitable for mass production inline with alignment jigs. The tank dimensions are 80x300x40 deep, and the solder usage amount is 6kg. Please feel free to contact us when you need assistance. 【Specifications】 ■ Power supply: AC100V/1.25kw ■ Tank dimensions: 80x300x40 deep ■ External dimensions: 170x420x130(H) ■ Solder usage amount: 6kg ■ Product weight: 5.5kg ■ Temperature control: Separate PID temperature control *For more details, please refer to the PDF document or feel free to contact us.

• Solder

We would like to introduce our ceramic soldering pot, the "SG-125S." The SG-125S is an ideal soldering pot for applications requiring reliability and long life, such as soldering and terminal processing in medical device blowers, high-lifespan home appliances like air conditioners, and motors used in financial institution equipment. Unlike metal pots, the ceramic construction prevents corrosion from tin during terminal processing of windings and motors. Additionally, since there is no melting or mixing of metal components, it allows for high-quality soldering without impurities. The power supply is AC100V/1kw, making it suitable for integration into automatic machines. The pot dimensions are 120x150x50 deep, and the solder usage is 5.6kg. Please feel free to contact us if you have any inquiries. 【Specifications】 ■ Power Supply: AC100V/1kw ■ Pot Dimensions: 120x150x50 deep ■ Overall Dimensions: 180x250x130(H) ■ Solder Usage: 5.6kg ■ Product Weight: 3.2kg ■ Temperature Control: Separate PID temperature control *For more details, please refer to the PDF document or feel free to contact us.

• Solder

Slot size 100mm x 100mm Unlike metal, our "ceramic soldering pot" does not allow components to dissolve into the solder, enabling high-quality soldering. With lead-free soldering becoming mainstream, our product, which uses sintered ceramic, boasts high reliability and a wealth of achievements in industries such as transformers, coils, and motor terminal processing that require high-temperature work using magnet wire (urethane coated). Additionally, while the crucible of the solder pot is a consumable, it can be used for an extended period with repair and replacement support for the crucible and heater. 【Features】 ■ Continuous operation at a maximum temperature of 520°C, allowing for compatibility with various temperature ranges ■ There is absolutely no occurrence of "contamination of the solder pot with dissimilar metals due to corrosion," which can be seen in metal pots made of SUS, titanium, etc., leading to issues with solderability ■ Soldering and motor terminal processing in the manufacturing of medical devices, high-durability home appliances, and other products *For more details, please download the PDF or feel free to contact us.

• Soldering Equipment

The "NC Heater" is an air heater that delivers stable hot air from room temperature up to 800°C. It is a clean heat source that is odorless and non-polluting, with a quick temperature rise and easy temperature control. Various controllers such as flow meters, pressure gauges, and temperature controllers are also available. It is used for deburring, soldering, crimping adhesive sealants, silver brazing, and more. Custom manufacturing is also possible. Please consult us for special cases, changes in voltage, adjustments to gas intake positions, specifications for thermocouples, and more. 【Features】 ■ Non-contact heating ■ Quick temperature rise ■ Use of inert gases is also possible ■ Durable *For more details, please download the PDF or feel free to contact us.

• Welding Machine

We offer a "ceramic soldering pot" that achieves high-quality soldering because, unlike metal, its components do not dissolve in solder. In the current era where lead-free soldering has become mainstream, our product, which uses sintered ceramics, boasts high reliability and a wealth of proven results in industries such as transformers, coils, and motor terminal processing that require high-temperature work with magnet wire (urethane-coated). Additionally, while the crucible of the soldering pot is a consumable, it can be used for an extended period with repair and replacement support for the crucible and heater. 【Features】 ■ Continuous operation at a maximum temperature of 520°C is possible, allowing for compatibility with various temperature ranges. ■ There are absolutely no issues such as "contamination of the solder pot with dissimilar metals due to corrosion, leading to problems with solderability," which can be seen in metal pots like SUS and titanium. *For more details, please download the PDF or feel free to contact us.

• Soldering Equipment