ギガ・セレクション（ギガセレクション） Product Lineup

This is a genuine small tabletop lathe that can be widely used for prototype single-item processing, research and development, and model making as educational materials. 【Points】 1. Comes standard with a 100mm three-jaw scroll chuck! 2. Compact design that can be installed and used in spaces like desks or workbenches! 3. Capable of machining aluminum, iron, brass, and even stainless steel!

We would like to introduce the "Tabletop Drill Grinding Machine" that we handle. The conventional outer peripheral grinding method, which grinds using the "outer circumference" of a conical grinding wheel, has the issue that the R of the grinding wheel is transferred to the drill tip, leading to a decrease in tip strength. In contrast, our machine employs a flat grinding method that grinds using the "flat surface" of the grinding wheel, finishing the tip flat, which enhances tip strength and extends tool life. 【Features】 ■ High-speed steel drills, as well as carbide drills (optional), can be easily ground to high-precision conical shapes by anyone. ■ Our unique flat grinding method results in a tip shape with high strength, extending tool life. ■ By adding a collet or collet holder (optional), it is also possible to regrind large diameter drills and end mill shank drills. ■ By replacing the grinding wheel (optional), it can also accommodate the grinding of candle (single line) type steel frame drills. *For more details, please download the PDF or feel free to contact us.

This is a high-quality, low-cost straight drill. It has good bite with X-shinning (φ2.5 and above).

The centering and chamfering can be processed simultaneously with two angles: the tip angle (120°) and the chamfer angle (60° or 90°), significantly reducing work time. Chamfering and groove processing are also possible.

●With this one tool, you can use it for deburring, chamfering, and V-groove processing. ●It features a replaceable tip, so regrinding is unnecessary. ●The tip can be used on four corners, making it economical.

- By adopting cobalt high-speed steel as the material and applying a TiAIN coating, it significantly excels in wear resistance and heat resistance. - The unique cutting edge shape with a larger cutting angle eliminates chatter and achieves a beautiful finish. - There are no secondary burrs, allowing for smooth processing. - The unique groove shape facilitates smooth chip removal. - It is ideal for heavy use on difficult-to-cut materials such as stainless steel and heat-resistant alloys. - In addition to general-purpose machines, it is also optimal for machining on milling machines and machining centers.

Achieves outstanding cost performance compared to genuine products.

This is a short sleeve for using a slow-away drill on an NC lathe. It is convenient when using a drill holder for internal lubrication due to its short gripping section. It can also be used as a boring bar sleeve.

You can secure effective space in NC lathes where the cabin space is narrow.

This is a sleeve made of vibration-absorbing magnesium alloy. Compared to conventional steel sleeves, it reduces chatter. It is recommended for finishing the inner diameter of high-hardness materials and hardened steel! Benefits of suppressing chatter: - Improved surface finish - Increased cutting speed - Extended tool life

【Lineup】 - C-SCLCR type for CC chips - C-SCLPR type for CP chips - C-STUPR type for TP chips - C-SDUCR type for DC chips - C-SDQCR type for DC chips

The "RCEM440" is a 4-flute, 40-degree spiral roughing end mill. By adopting an uneven division and a 40-degree spiral, it achieves a quiet cutting sound. With high-quality ultra-fine particle carbide and a high heat-resistant ALCrN coating, it can handle a wide range of materials from general steel to difficult-to-cut materials. Additionally, the moderately rounded corner C face helps prevent chipping. We have added variations with different cutting lengths and slim shank types, providing excellent cost performance. 【Features】 ■ 4-flute, 40-degree spiral roughing end mill ■ Quiet cutting sound due to uneven division and 40-degree spiral ■ Fine pitch achieves low resistance, reducing machining load ■ Moderately rounded corner C face prevents chipping ■ High-quality ultra-fine particle carbide and high heat-resistant ALCrN coating ■ Excellent cost performance *For more details, please download the PDF or feel free to contact us.

The "GSCHM" is a 4-flute carbide chamfer cutter that can increase feed rates and achieve high-efficiency machining. Its optimized groove shape provides excellent chip evacuation. The cutting resistance is low, and it has a structure that minimizes burr formation. Additionally, the larger top diameter contributes to a high-rigidity chamfer cutter. Please feel free to contact us when you need assistance. 【Features】 ■ Achieves high-efficiency machining with faster feed rates thanks to its 4 flutes ■ Excellent chip evacuation due to optimized groove shape ■ Low cutting resistance and minimal burr formation ■ High-rigidity chamfer cutter with a larger top diameter ■ Suitable for a wide range of materials, from general steel to difficult-to-machine materials and non-ferrous metals *For more details, please download the PDF or feel free to contact us.

We would like to introduce the 'BBEM330/430' handled by Giga Selection. This product is a 3-flute/4-flute carbide ball end mill designed for multi-flute applications, allowing for increased feed rates and achieving high-efficiency machining. It can process materials up to HRC52 hardness. Thanks to the ALCrN-based coating, it is suitable not only for mold steel but also for stainless steel and difficult-to-cut materials. 【Features】 ■ Allows for increased feed rates due to its multi-flute design, achieving high-efficiency machining ■ Suitable for mold steel, stainless steel, and difficult-to-cut materials thanks to the ALCrN-based coating ■ Capable of processing materials up to HRC52 hardness *For more details, please download the PDF or feel free to contact us.

The "DRS Series" is a versatile carbide drill that is suitable for various materials. With its large chip pocket, it demonstrates excellent chip evacuation. The chamfering at the corners reduces burrs on through holes. The straight blade shape enhances cutting edge strength while producing smaller chips. The high K-Value improves the drill's durability, providing outstanding cost performance. 【Features】 ■ Excellent chip evacuation due to the large chip pocket ■ Reduced burrs on through holes due to corner chamfering ■ Easy to re-sharpen blade shape ■ Versatile drill suitable for various materials ■ Outstanding cost performance *For more details, please download the PDF or feel free to contact us.

The "SEEM235/SZES345" is a carbide end mill that can handle a wide range of materials from general steel to difficult-to-cut materials. The "SEEM235" is a two-flute end mill with a 35-degree twist and pin-shaped tip, featuring a medium cutting length of 2.5D to 3D. It is suitable for flat machining, side machining, groove machining, and helical machining. The "SZES345" is a three-flute end mill with a 45-degree twist, excelling in Z-axis machining. Its special shape at the bottom and large gash ensure excellent chip evacuation, with a slightly short cutting length of 1.5D to 2.2D. 【Features】 <SEEM235> ■ Two-flute end mill with a 35-degree twist and pin-shaped tip ■ Medium cutting length of 2.5D to 3D <SZES345> ■ Three-flute end mill with a 45-degree twist, excelling in Z-axis machining ■ Special shape at the bottom and large gash ensure excellent chip evacuation ■ Slightly short cutting length of 1.5D to 2.2D *For more details, please download the PDF or feel free to contact us.

The "DRLX" is a carbide long drill with low cutting resistance and minimal load on the spindle. The polished flutes prevent welding and allow for smooth chip evacuation. The large S-shaped chip pocket achieves excellent chip removal performance. The chamfering at the corners prevents breakage and reduces burrs, while the large core thickness ensures rigidity. The double margin improves straightness. 【Features】 ■ Low cutting resistance and minimal load on the spindle ■ Polished flutes prevent welding and allow for smooth chip evacuation ■ Large S-shaped chip pocket achieves excellent chip removal performance ■ Chamfering at the corners prevents breakage and reduces burrs ■ Large core thickness ensures rigidity ■ Double margin improves straightness *For more details, please download the PDF or feel free to contact us.

The "SEEM440" is a 4-blade carbide square designed to prevent chatter through unequal division. It features a large chip pocket that ensures good chip evacuation. The blade length is approximately 2.5D, making it a medium blade. With high-quality ultra-fine particle carbide and a high heat-resistant ALCrN coating, it is suitable for a wide range of materials from general steel to difficult-to-cut materials. It offers excellent cost performance. 【Features】 ■ Large chip pocket for good chip evacuation ■ Chatter prevention through unequal division ■ Blade length is approximately 2.5D, medium blade ■ Wide compatibility from general steel to difficult-to-cut materials due to high-quality ultra-fine particle carbide and high heat-resistant ALCrN coating ■ Outstanding cost performance *For more details, please download the PDF or feel free to contact us.

The "SJDM440" is a four-blade ultra-hard square end mill made from ultra-fine particle carbide. It features a high heat-resistant TiSi-based coating that improves wear resistance. The design has an increasing core thickness towards the shank, achieving high rigidity. It demonstrates high performance on harder work materials with a hardness of HRC 35 or higher, as well as difficult-to-machine materials such as stainless steel and Inconel. 【Features】 ■ Ultra-fine particle carbide ■ Improved wear resistance due to high heat-resistant TiSi-based coating ■ Excellent vibration resistance with uneven division and uneven lead (39/42 degrees) ■ High rigidity achieved with a design that increases core thickness towards the shank *For more details, please download the PDF or feel free to contact us.

The "SJES440/SJEL435" is a four-flute carbide square end mill that features high-quality ultra-fine particle carbide and a high heat-resistant ALCrN-based coating. The SJES440 is a short-flute type with a 37/40-degree twist, suitable for groove machining and automatic lathe processing. The SJEL435 has a 35/38-degree twist and a long flute type with a length ranging from 4D to 5D. Both models are compatible with a wide range of materials, from general steel to difficult-to-machine materials. Please feel free to contact us if you have any inquiries. 【Features】 <SJES440> ■ Four flutes, 37/40-degree twist, short-flute type ■ Suitable for groove machining and automatic lathe processing <SJEL435> ■ Four flutes, 35/38-degree twist, long-flute type with a length of 4D to 5D ■ Suitable for side machining *For more details, please download the PDF or feel free to contact us.

The "NRES435" is a 4-flute radius end mill with a 35/38 degree twist. Thanks to its high-quality ultra-fine particle carbide and high heat-resistant ALCrN-based coating, it can handle a wide range of materials from general steel to difficult-to-machine materials. It can be used for flat machining, side machining, groove machining, helical machining, ramping, plunging, and contouring. 【Features】 ■ 4-flute radius end mill with a 35/38 degree twist ■ Outstanding vibration resistance due to uneven division and uneven lead ■ High-quality ultra-fine particle carbide and high heat-resistant ALCrN-based coating ■ Wide compatibility from general steel to difficult-to-machine materials *For more details, please download the PDF or feel free to contact us.

We would like to introduce the end mills compatible with high hardness material processing that we handle. The 'SWDM650/850' is a carbide multi-flute end mill with 6/8 flutes and a strong 50-degree twist. The 'BBDM230' is a standard ball end mill with 2 flutes and a 30-degree twist. It is suitable for processing high hardness materials up to HRC62 and can be utilized for curved surface machining and engraving. 【Features】 <SWDM650/850> ■ 6/8 flutes, strong 50-degree twist type end mill ■ Suitable for finishing high-feed machining from steel and cast iron to difficult-to-cut materials ■ Precision finishing with minimal chipping ■ Excellent cost performance <BBDM230> ■ Standard ball end mill with 2 flutes and a 30-degree twist ■ Suitable for processing high hardness materials up to HRC62 *For more details, please download the PDF or feel free to contact us.

The "SAUM345" is a three-flute, 45-degree spiral, pin-end type, three-flute carbide square end mill. With its sharp cutting edge, it offers excellent cutting performance and is expected to provide a clean finish. We offer two types: medium-length flutes and long-neck types. The medium-length flute has a flute length of approximately 2.5D and is suitable for flat machining, side machining, groove machining, helical machining, and ramping. The long-neck type features a longer effective length and is designed for plunge machining as well. 【Features】 ■ Three-flute, 45-degree spiral, pin-end type end mill ■ Non-coated type, suitable for machining non-ferrous metals including aluminum ■ Sharp cutting edge for excellent cutting performance and expected clean finish ■ Available in two types: medium-length flutes and long-neck types *For more details, please download the PDF or feel free to contact us.

The "SQUM440/NQUM440" is an internal lubrication type end mill that ejects coolant from oil holes located on the outer circumference. It is designed to improve chip evacuation, wear resistance, surface finish, and extend tool life. It features excellent vibration resistance due to its uneven pitch and uneven lead. With chip breakers on the outer and bottom cutting edges, chips are shortened, and the smoothly polished grooves allow for smooth chip evacuation. 【Features】 - Coolant is ejected from oil holes on the outer circumference - Improved chip evacuation, wear resistance, and surface finish - Chip breakers on the outer and bottom cutting edges shorten chips - Excellent vibration resistance due to uneven pitch and uneven lead - Smoothly polished grooves allow for smooth chip evacuation *For more details, please download the PDF or feel free to contact us.

The "SFUR230" is a square end mill specialized for resin processing with 2 blades and a 30-degree twist. It is standardized in two types: full-length and long-neck, achieving excellent cost performance. It is suitable for flat machining, side machining, and groove machining. Please feel free to contact us when you need assistance. 【Features】 ■ Square end mill specialized for resin processing with 2 blades and a 30-degree twist ■ Standardized in full-length and long-neck types from φ0.2 to φ6 ■ Excellent cost performance *For more details, please download the PDF or feel free to contact us.

The "BFUR230" is a ball end mill specialized for resin processing with two blades and a 30-degree twist. We offer two standard types: full-length and long-neck, achieving excellent cost performance. It is suitable for curved surface processing. Please feel free to contact us when you need assistance. 【Features】 ■ Ball end mill specialized for resin processing with two blades and a 30-degree twist ■ Standardized full-length type and long-neck type from R0.1 to R3 ■ Excellent cost performance *For more details, please download the PDF or feel free to contact us.

■3-blade, 40-degree twist, roughing end mill for non-ferrous metal processing ■Low cutting resistance and quiet machining sound. Minimal workpiece deformation ■Excellent chip evacuation ■Corner sections are rounded, all are neck relief types *For more details, please download the PDF or feel free to contact us.*

■4-blade, 35/38 degree twist, long blade type with a blade length of 4D to 5D ■Outstanding vibration resistance due to uneven division and uneven lead ■Wide compatibility from general steel to difficult-to-cut materials thanks to high-quality ultra-fine particle carbide and high heat-resistant ALCrN coating *For more details, please download the PDF or feel free to contact us.*

- 3-flute, 45-degree twist end mill that excels in machining along the Z-axis. - The special shape of the bottom cutting edge and large gash ensure excellent chip evacuation. - The cutting length is a slightly short blade ranging from 1.5D to 2.2D. - Capable of handling a wide range of materials from general steel to difficult-to-cut materials, thanks to high-quality ultra-fine particle carbide and high-heat-resistant ALCrN coating. *For more details, please download the PDF or feel free to contact us.

■ Achieves seat boring processing in one step with a 180-degree full flat bottom blade. ■ Enables processing that was impossible with conventional drills, such as hole machining on slopes and correction of eccentric holes. It is also expected to reduce burrs in thin plates and tolerance holes. ■ The special corner shape prevents chipping and reduces burrs. ■ By specially treating the surface of the drill bottom's gash area, friction with the workpiece is reduced. ■ The optimized groove design ensures excellent chip evacuation and vibration resistance. *For more details, please download the PDF or feel free to contact us.*

The reading drill allows for two types of processing: the chamfering process and the pre-drilling hole processing. *For more details, please download the PDF or feel free to contact us.*