ライスター・テクノロジーズ List of Products and Services

The shrink packaging machine "EZ-PACK" is equipped as standard with Leister's hot air heater and digital screen temperature control model, enabling precise and easy beautiful shrink wrapping. Since temperature management can be done with digital numbers, it allows for shrink wrapping at the same temperature consistently. It accommodates a wide variety of containers and various materials of shrink film with flexible hot air. 【Features】 - Easy temperature setting for a variety of shrink types with high reproducibility - Minimal thermal impact on contents and containers due to instant heating - Maximum power consumption reduced by 36% compared to conventional models, achieving significant energy savings - Quick startup and shutdown within approximately 5 minutes - Lightweight design with an aluminum frame for easy mobility Starting with the "LEP-IV type (4-direction blowing)" that applies high-pressure hot air from four directions to achieve a beautiful finish without wrinkles or unevenness, we also offer the "LEP-II LR type (2-direction blowing left and right)" and the "LEP-II UD type (2-direction blowing up and down)." We have a proven track record in a wide range of industries including cosmetics, pharmaceuticals, and miscellaneous goods. For more details, please refer to the PDF materials or feel free to contact us.

The "EZ-CAP SEAL" is a cap shrink device that can select and adopt a digital temperature control model. It is compact, equipped with casters for easy movement, and can shrink immediately. With a maximum airflow of 900L/min, it minimizes shrinkage unevenness and also allows for airflow adjustment. Furthermore, it heats only the cap area with hot air, making it simple and economical. The thermal impact on the contents is minimized compared to using tunnels or ovens. 【Features】 - The stand frame is made of aluminum and comes with casters for easy mobility. - The heater (hot air machine) is equipped with an auto cool-down function as standard. - Start-up and shutdown take place within approximately 5 minutes. - Individual sales of hot air machines, nozzles, etc., are also available. - A low-cost analog temperature control type hot air generator is also available. We have a demonstration unit prepared at our showroom in Shin-Yokohama and Esaka. If you provide us with sample shrink film and bottles, we can conduct a shrink test. We will select the optimal nozzle based on your cap shape. Please feel free to contact us.

"EZ-DRY" is a device suitable for drying wet tofu and frozen products before printing, as well as for removing frost. The heater section is equipped with a high-durability, high-output Leister hot air blower, allowing for digital temperature control. It removes moisture and defrosts instantly with high-pressure hot air. Since it provides instant drying before printing, it has minimal impact on the product's exterior and contents. There are also models compatible with 100V voltage. 【Features】 ■ Instantly removes moisture and defrosts with high-pressure hot air ■ Minimal impact on the product's exterior and contents due to instant drying before printing ■ Compact design that saves space ■ Easy to move with a caster-equipped stand ■ Start-up and shutdown can be completed in about 5 minutes ■ Individual sales of hot air blowers, fans, nozzles, etc., are also available *For more details, please refer to the PDF document or feel free to contact us.

The "SOLANO AT" is a high-performance heat gun with a handle, featuring a brushless motor and heater manufactured by Leister, achieving high durability. It is equipped with a multi-stage heating protection system, allowing for intuitive operation. Intelligent temperature control ensures stable performance. It is suitable for a wide range of applications across various industrial fields. 【Features】 ■ Maximum values for temperature and airflow can be set ■ Direct start can be configured ■ Cooling function can be set ■ Energy-saving function can be set ■ Element can be replaced You can test it using our demo unit. There is also a YouTube video and optional heat protection (burn prevention) available. *For more details, please refer to the PDF document or feel free to contact us.

- Powerful pallet shrink heat gun - Flame-free and safe shrink operation - Suitable for indoor use - Tool stand and handle integrated - Simple weak/strong two-stage operation - 10m power cord *Requires 200-230V three-phase AC power supply. Please check the shape of the power plug when requesting a quote.

WELDY is a brand of the Swiss company LEISTER, which has a history of over 50 years. LEISTER hot air tools are used worldwide.

We would like to introduce a case of "tube filling" using the hot air technology of Leister Technologies, Inc. With our air heaters, hot air welding can flexibly weld various tube materials, including innovative options such as coated cardboard and bioplastics. We achieve high-quality welding seams, sealing up to 100 tubes per minute at each heating station. Furthermore, our hot air recycling feature reduces energy costs by half and accelerates our commitment to sustainability. 【Advantages of Hot Air Welding】 - Flexibly welds various tube materials, including innovative options such as coated cardboard and bioplastics. - Achieves high-quality welding seams, sealing up to 100 tubes per minute at each heating station. - The hot air recycling feature reduces energy costs by half and accelerates our commitment to sustainability. *For more details, please download the PDF or feel free to contact us.

We would like to introduce the "Drying Process" using hot air technology from Leister Technologies, Inc. In the drying operations of the process, the amount and flow of air can be adjusted to match the desired drying condition. This includes adjusting parameters such as temperature and exhaust air volume, as well as utilizing different nozzles. Additionally, among various equipment, heat guns can be used not only in automotive manufacturing assembly plants but also for immediate drying of paint repairs, as well as in the craft industry and hobby crafts in home workshops. 【Features】 ■ Drying operations in the process - It is possible to change the amount and flow of air to match the desired drying condition. - We offer powerful blow-off nozzles and air pack blowers specially developed for hot air drying. ■ Drying using heat guns - Can be used for immediate drying of paint repairs and in the craft industry, as well as for hobby crafts in home workshops. *For more details, please download the PDF or feel free to contact us.

We would like to introduce a case study of "ignition" using the hot air technology from Reister Technologies Co., Ltd. Our heat gun is effective for biomass ignition. The Igniter series heat gun provides a quick and effective solution for biomass ignition. It allows you to quickly ignite firewood in a fireplace using a hot air blower without the need for matches or lighters. You can ignite easily and cleanly with a hot air blower, avoiding the use of barbecue lighters or dangerous ignition devices. [Case Overview] - Effective for biomass ignition - Allows for immediate and efficient ignition of fireplaces without the hassle of matches - By avoiding fires, it eliminates fuel odors, making BBQs more enjoyable and reducing risks *For more details, please download the PDF or feel free to contact us.

We would like to introduce a case of "Film Shrink" using the hot air technology of Reister Technologies, Inc. Starting with tube-shaped shrink films used in the food and beverage industry, it is possible to package products and apply shrink wrapping. Additionally, it is also possible to protect vehicles temporarily with shrink film for winterization measures for motorboats and yachts, as well as various types of vehicles. 【Implementation Effects (Partial)】 ■ Shrinkage of packaging film - Serves as a cover for bottles and extends the overall height - Protects from dirt while also serving decorative purposes ■ Product packaging and shrink wrapping - Cost-effective and easy to recycle - Can protect against changes in weather, dirt, and damage *For more details, please download the PDF or feel free to contact us.

We would like to introduce the "Sterilization by Hot Air" technology from Reister Technologies, Inc. In contrast to "sterilization" at temperatures above 100°C, "low-temperature sterilization" is used primarily to extend the shelf life of food by killing microorganisms. However, since there are no bacteria present afterward, it must usually be stored in refrigeration. In either case, the required temperature can be very effectively achieved with hot air during the corresponding period. Our precisely controlled air heaters and hot air blowers are suitable for reliable process control during sterilization and low-temperature sterilization. 【Features】 ■ Whether for sterilization at temperatures above 100°C or low-temperature sterilization below 100°C, the required temperature can be very effectively achieved with hot air during the corresponding period. ■ Precisely controlled air heaters and hot air blowers are suitable for reliable process control during sterilization and low-temperature sterilization. *For more details, please download the PDF or feel free to contact us.

We would like to introduce the "Lamination Process" using hot air technology from Reister Technologies, Inc. Specific examples of lamination using hot air include kitchen countertops, furniture manufacturing, and floor laminating. In hot air lamination, the surfaces of the materials being joined are uniformly heated. This process is used in the furniture and automotive industries for upholstery foams and wood processing. Here, a hard, washable, and scratch-resistant laminate is applied over a carrier plate, enhancing its durability. 【Features】 - A wide nozzle is often used to ensure uniform air and temperature distribution, as the surfaces of the materials being joined are uniformly heated. - It is used for upholstery foams and wood processing in the furniture and automotive industries. - A hard, washable, and scratch-resistant laminate is applied over the carrier plate, enhancing its durability. *For more details, please download the PDF or feel free to contact us.

We would like to introduce a case of "plastic molding" using the hot air technology of Reister Technologies, Inc. Whether in the process of laying sheet materials on a roof or when applied in underground engineering, plastic can be molded in unstable locations, simplifying subsequent processes. Additionally, when installing plastic or linoleum flooring, hot air is used to shape the necessary forms for corners and entrance steps. [Usage Purposes (Partial)] ■ Molding process using heat - When multiple plastic parts or runners are fused after injection molding or blow molding, hot air can be used to separate them. ■ Plastic molds for plumbers and metalworking shops - Tubes are heated and molded into the desired shape. *For more details, please download the PDF or feel free to contact us.

We would like to introduce "Thermoplastic Material Molding Processing" using hot air technology from Reister Technologies, Inc. Our air heaters and hot air blowers are used to heat materials before the molding process. By providing a wide range of services, we can select the most suitable equipment for each process. Additionally, when multiple plastic parts or runners are fused after injection molding or blow molding, hot air can be used to separate them according to the intended purpose. 【Features】 ■ Uniformly heating sheet-like plastics before three-dimensional molding using vacuum deep drawing or a press machine in a sealed type ■ Using hot air to heat certain parts or entire components to ensure sufficient flexibility for the molding process *For more details, please download the PDF or feel free to contact us.

We would like to introduce "3D Printing or Welding" using the hot air technology of Reister Technologies, Inc. Plastic welding and 3D printing have been made possible by an automated extruder mounted on a robotic arm. Pipe joints, containers, or fittings made of PE (polyethylene), PP (polypropylene), PVDF, and PVC PC, which have previously been done manually, can now be produced and welded through automation. 【Features】 ■ Welding - By automating the welding process, welding tasks can be performed particularly accurately and quickly, while simultaneously reducing labor costs. ■ 3D Printing - In addition to vertical printing, horizontal printing and printing in various other directions are possible. - Large-scale 3D printing in meter-scale dimensions, which was impossible with previous small 3D printers, is now achievable. *For more details, please download the PDF or feel free to contact us.

We would like to introduce the "embossing process" using hot air machines and infrared heaters handled by Reister Technologies, Inc. Synthetic leather or artificial leather is composed of multiple layers, including a base fabric, plastic, and decorative materials made of various polyvinyl chloride and polyurethane. The surface is heated and then embossed to form a specific surface structure. Additionally, embossing is used not only for wallpaper and flooring but also as interior materials. The pre-prepared materials are heated on the surface before being embossed with a metal roller, creating a distinctive surface structure. 【Features】 ■ Synthetic Leather - The surface is heated and then embossed to form a specific surface structure. - Imitation leather is washable and can be obtained in meter lengths, making processing in the textile industry easy. ■ Embossed Decorative Layer - Used not only for wallpaper and flooring but also as interior materials. *For more details, please download the PDF or feel free to contact us.

We would like to introduce the "Coating Process" using infrared technology from Leister Technologies, Inc. In the mechanical coating process, infrared or hot air is essential for ensuring process optimization. In the case of hot air coating, surface pretreatment is key to determining the quality and durability of the coating. Additionally, infrared dip coating is a standard process in the textile and paper industries. In this solvent-based process, it is important to perfectly dry the textile or paper. 【Features】 ■ Hot Air Coating - Surface pretreatment is key to determining the quality and durability of the coating. - Used to dry liquid cleaning agents and solvent residues, ensuring the surface condition is adequately prepared for the next process. ■ Infrared Dip Coating - A standard process in the textile and paper industries. *For more details, please download the PDF or feel free to contact us.

We will introduce drying using infrared radiation. Infrared heaters are used in the textile industry, non-woven fabrics, and other fabrics, as well as in paper and printing machines. Our infrared heaters emit mid-infrared radiation, which is very effective for moisture absorption. This allows infrared heating to directly warm water, making the drying process more efficient. 【Features】 ■ Direct heat transfer allows for immediate drying of coatings and dyeing on metals, plastics, wood, and textiles without generating dust. ■ Very effective for moisture absorption. ■ Infrared heating can also directly warm water, making the drying process more efficient. *For more details, please download the PDF or feel free to contact us.

We would like to introduce the lamination of composite panels using infrared panels. Infrared heating technology is generally used to laminate different shapes into another shape, or to combine different materials into one. The outer thin decorative layer is often permanently bonded to the multi-layer core using heated adhesive. It can also be used to create PVC flooring, synthetic leather, or other multi-layer decorative materials. 【Features】 ■ The outer thin decorative layer is often permanently bonded to the multi-layer core using heated adhesive. ■ It is possible to create PVC flooring, synthetic leather, or other multi-layer decorative materials using infrared heating technology. *For more details, please download the PDF or feel free to contact us.

We would like to introduce deep drawing using infrared radiation. In deep drawing processing with infrared, the material is heated by infrared radiation. Thanks to the rapid response of our Klerus infrared heaters, it is possible to turn off the heater's power during non-production time. Additionally, plastic from rolls and plastic sheets are heated, and molded parts are produced. In particular, in the automotive industry, many molded products are used, such as door panels and classic parcel shelves made through deep drawing. 【Features】 ■ Deep drawing processing with infrared, where the material is heated by infrared radiation ■ The rapid response allows for the heater's power to be turned off during non-production time, which is especially useful in sequential processes, resulting in significant energy savings. *For more details, please download the PDF or feel free to contact us.