石川産業 Product Lineup

In the metal processing industry, temperature management in the heat treatment process is extremely important as it affects product quality. Even slight fluctuations in heat treatment temperature can significantly impact the strength and durability of products, necessitating precise temperature measurement and control. Failures of thermocouples or improper selection can lead to the occurrence of defective products and a decrease in production efficiency. Our thermocouple-related products support the resolution of temperature management challenges in the heat treatment process with a diverse product lineup and quick delivery response. 【Usage Scenarios】 - Hardening and tempering of metal parts - Melting and casting of metals - Monitoring of furnace temperatures 【Benefits of Implementation】 - Improved quality through accurate temperature measurement - Maintenance of production efficiency through stable supply - Reduction of opportunity loss through shortened delivery times

• Other measurement, recording and measuring instruments

In the ceramics industry, temperature management during the firing process is crucial for determining product quality. Even slight fluctuations in firing temperature can affect the strength and color of the products, potentially leading to defects. Thermocouples are essential for accurately measuring the temperature inside the kiln, enabling proper temperature management. Ishikawa Industry's thermocouple-related products address the challenges of temperature management in the firing process and support the production of consistently high-quality products. 【Application Scenarios】 - Temperature measurement inside the kiln - Quality control of ceramic products - Optimization of the firing process 【Benefits of Implementation】 - Accurate monitoring of firing temperature - Improvement in product quality - Enhanced yield

• Other measurement, recording and measuring instruments

In the field of environmental emissions measurement, accurate temperature measurement is essential. The temperature of exhaust gases significantly affects combustion efficiency and the composition of emissions, making it a crucial factor for compliance with environmental regulations. Failures or inaccuracies in thermocouples can undermine the reliability of analysis results and hinder appropriate measures. Ishikawa Industries' thermocouple-related products cater to diverse needs and support stable measurements. 【Application Scenarios】 - Exhaust gas analysis equipment - Incinerators - Boilers - Various plants 【Benefits of Implementation】 - Improved analysis accuracy through precise temperature management - Compliance with environmental regulations - Stable operation of equipment - Reduced downtime through rapid product supply

• Other measurement, recording and measuring instruments

In the energy industry, there is a demand for improved power generation efficiency and stable operation of equipment. In particular, accurate temperature measurement in high-temperature environments is essential for anomaly detection and optimal operational management of equipment. Delays in the supply of thermocouples or late deliveries can hinder planned maintenance and efficient operations. Our thermocouple-related products can quickly respond to your needs due to our abundant inventory and procurement from diverse manufacturers. 【Application Scenarios】 - Power generation plants - Heat treatment equipment - Research and development related to energy 【Benefits of Implementation】 - Optimization of equipment through stable temperature measurement - Reduction of supply chain risks - Decrease in downtime through rapid product supply

• Other measurement, recording and measuring instruments

In the aerospace industry, accurate temperature measurement is essential to ensure the safety and reliability of products during heat resistance testing. Thermocouples play a crucial role in evaluating the performance of materials and components in high-temperature environments. The selection of thermocouples, supply systems, and response to delivery times can pose challenges. Ishikawa Industries' thermocouple-related products quickly respond to customer needs with a diverse range of manufacturers and ample inventory. 【Usage Scenarios】 * Heat resistance testing of aircraft components * Temperature measurement of space rocket engines * Material testing in high-temperature environments 【Benefits of Implementation】 * Increased efficiency and accuracy of tests * Shortened product development periods * Realization of a stable temperature measurement environment

• Other measurement, recording and measuring instruments

In the automotive manufacturing process, establishing quality control and an efficient production system is essential. In particular, temperature management during heat treatment and welding processes is a critical factor that influences product quality. Delays or inaccuracies in temperature measurement can lead to the occurrence of defective products and a decrease in production efficiency. Ishikawa Industries' thermocouple-related products address diverse needs and support the resolution of temperature management challenges in the automotive manufacturing process by ensuring stable supply and prompt delivery. 【Usage Scenarios】 - Heat treatment process - Welding process - Engine parts manufacturing - Body painting process - Quality inspection 【Benefits of Implementation】 - Improved quality through stable temperature management - Reduced risk of delivery delays - Response to diverse needs - Cost reduction

• Other measurement, recording and measuring instruments

In the semiconductor industry, precise measurement plays a crucial role in temperature management, which significantly affects product quality and performance. In particular, monitoring subtle temperature changes during the manufacturing process is essential for improving yield. Thermocouples are widely used for such precise temperature measurements; however, many companies face challenges in procuring optimal products due to supply chain instability and difficulties in product selection. Ishikawa Industries' thermocouple-related products address diverse needs and achieve stable supply, thereby supporting the resolution of temperature management challenges in semiconductor manufacturing. 【Application Scenarios】 - Temperature management in semiconductor manufacturing processes - Precise temperature measurement in research and development - Temperature measurement in quality control 【Benefits of Implementation】 - Improved production efficiency through stable product supply - Optimal product selection through a diverse product lineup - Problem-solving based on specialized knowledge and proposals

• Other measurement, recording and measuring instruments

In the glass industry’s melting process, precise temperature management significantly affects product quality. To accurately measure the temperature inside the melting furnace and maintain stable quality, reliable thermocouples are essential. Failures or delays in thermocouples can lead to decreased production efficiency and quality issues. Our thermocouple-related products support problem-solving in the glass melting process by addressing diverse needs and ensuring stable supply. 【Usage Scenarios】 - Temperature measurement in glass melting furnaces - Monitoring and controlling melting temperatures - Detecting temperature anomalies in the melting process 【Benefits of Implementation】 - Improved quality through stable temperature management - Reduced lead times and cost savings - Enhanced production efficiency

• Other measurement, recording and measuring instruments

In the food industry, accurate temperature management is essential to ensure product quality and safety. In particular, monitoring temperature during the manufacturing process is crucial for reducing the risk of foodborne illness and properly managing product shelf life. Inadequate temperature management can lead to food spoilage and bacterial growth, potentially resulting in decreased product quality and health hazards. Ishikawa Industry's thermocouple-related products address the challenges of temperature management in food manufacturing. 【Usage Scenarios】 - Heating and cooling processes of food - Temperature management in refrigerators and freezers - Temperature measurement of cooking utensils - Quality inspection of food 【Benefits of Implementation】 - Improved food safety - Preservation of product quality - Increased efficiency of manufacturing processes - Compliance with regulations

• Other measurement, recording and measuring instruments

In the pharmaceutical industry, temperature management during the manufacturing process is crucial for maintaining product quality. Inadequate temperature management can lead to product deterioration and quality degradation, potentially affecting safety and efficacy. Ishikawa Industries' thermocouple-related products address temperature measurement challenges and contribute to quality preservation. 【Application Scenarios】 - Temperature management in pharmaceutical manufacturing - Temperature measurement in quality control departments - Temperature testing in research and development 【Benefits of Implementation】 - Improved quality management through accurate temperature measurement - Stable supply of products - Optimization of the manufacturing process

• Other measurement, recording and measuring instruments

In the chemical industry, precise management of reaction temperature is crucial for ensuring product quality and safety. Inadequate temperature control can lead to issues in the progress of the reaction, resulting in failure to obtain the desired products or the occurrence of unexpected side reactions. Ishikawa Industries' thermocouple-related products enable accurate temperature measurement in diverse temperature environments, supporting solutions to challenges in reaction control. 【Application Scenarios】 - Temperature monitoring of chemical reaction processes - Temperature measurement within reaction vessels - Temperature management in research and development 【Benefits of Implementation】 - Improved product quality through optimization of reactions - Realization of safe chemical reaction processes - Increased efficiency in research and development

• Other measurement, recording and measuring instruments

In the steel industry, temperature management in the manufacturing process is a crucial factor that influences product quality and safety. Accurate temperature measurement in high-temperature environments is essential for optimizing the strength and characteristics of steel materials. Failures of thermocouples or inaccurate measurements can lead to decreased production efficiency and quality issues. Ishikawa Industries' thermocouple-related products cater to diverse needs and support stable temperature management. 【Usage Scenarios】 - Temperature measurement in high-temperature environments at steel mills - Temperature management in heat treatment processes - Temperature monitoring in casting processes - Temperature control in continuous casting 【Benefits of Implementation】 - Quality improvement through accurate temperature measurement - Maintenance of production efficiency through stable supply - Optimal product selection from a rich product lineup - Proposals based on specialized knowledge and expertise

• Other measurement, recording and measuring instruments

In experiments conducted at research institutions, accurate temperature measurement affects the reliability of experimental results. In particular, temperature management of CPUs, circuit boards, and other electronic components is crucial for ensuring the reproducibility of experiments and the accuracy of data. Traditional temperature measurement methods often have small contact areas, making precise temperature measurement difficult, or can be cumbersome to install. Our sheet-type coated thermocouples address these challenges with a wide contact area and easy application. 【Usage Scenarios】 - Temperature measurement of CPUs and circuit boards - Temperature testing of electronic components - Temperature management in research and development 【Benefits of Implementation】 - Improved reliability of experimental data through accurate temperature measurement - Enhanced work efficiency due to easy installation - Compatibility with a wide temperature range (NS series)

• Other measurement, recording and measuring instruments

In the medical field, especially in surgery, managing a patient's body temperature is extremely important. Even slight fluctuations in body temperature can affect the safety of the surgery and the recovery process afterward. Accurate temperature measurement is essential to reduce the risk of complications and ensure patient safety. Our sheet-type covered thermocouples have been developed to meet such needs. [Usage Scenarios] - Temperature monitoring in the operating room - Temperature management of medical devices - Temperature measurement of biological tissues [Effects of Implementation] - Improved safety through accurate temperature measurement - Optimization of patient body temperature management - Reduction of complication risks

• Other measurement, recording and measuring instruments

In the electronics industry, temperature management of circuit boards affects product performance and reliability. In particular, managing temperature in areas that are difficult to measure accurately, such as near heat sources like CPUs and gaps between the circuit board and other components, is crucial. Low accuracy in temperature measurement can lead to product malfunctions or failures. Our sheet-type coated thermocouples accurately measure the temperature of circuit boards, contributing to improved product quality. 【Application Scenarios】 - CPU surfaces - Gaps between circuit boards and other components - Temperature testing of electronic devices 【Benefits of Implementation】 - Improved product quality through accurate temperature measurement - Reduced risk of failure - Optimization of temperature design in product development

• Other measurement, recording and measuring instruments

In the glass molding industry, temperature management, which affects product quality, is crucial. Even slight fluctuations in molding temperature can impact the shape and strength of the product. Accurate temperature measurement is essential to prevent the occurrence of defective products and improve yield. Sheet-type covered thermocouples address the challenges of temperature management in glass molding. 【Application Scenarios】 - Temperature measurement of glass molding molds - Temperature measurement inside glass product firing kilns - Temperature monitoring in glass manufacturing lines 【Benefits of Implementation】 - Quality improvement through accurate temperature measurement - Reduction in defect rates - Improvement in production efficiency

• Other measurement, recording and measuring instruments

In the metal quenching process, proper temperature management significantly affects product quality. If the temperature is inappropriate, the hardness and strength of the metal may decrease, potentially adversely affecting the product's performance. Sheet-type coated thermocouples can be easily attached to the quenching target, enabling accurate temperature measurement. This optimizes temperature management during the quenching process and supports the production of high-quality products. 【Usage Scenarios】 - Quenching process of metal parts - Temperature measurement inside heat treatment furnaces - Temperature management after quenching 【Benefits of Implementation】 - Quality improvement through optimization of quenching temperature - Reduction of defective products - Increased efficiency in process management

• Other measurement, recording and measuring instruments

In the energy industry, especially in power plants, stable operation of equipment is crucial. Accurate temperature management of each component is essential to maximize power generation efficiency and ensure safety. If the accuracy of temperature measurement is low, it may lead to an inability to detect overheating or abnormalities in equipment early, potentially resulting in serious accidents. Our sheet-type covered thermocouples address the challenges of temperature management in power generation facilities. 【Usage Scenarios】 - Temperature monitoring of turbines, generators, transformers, etc. - Temperature measurement for waste heat recovery systems - Temperature management of solar power generation systems 【Benefits of Implementation】 - Early detection of equipment abnormalities to prevent accidents - Optimization of power generation efficiency - Reduction of maintenance costs

• Other measurement, recording and measuring instruments

In the chemical industry, accurate temperature measurement is essential for ensuring the efficiency and safety of reactions. Even slight fluctuations in reaction temperature can significantly impact the quality and yield of the products. Additionally, excessive temperature increases pose risks of runaway reactions and dangerous conditions. Sheet-type covered thermocouples help accurately monitor the temperature within the reaction vessel and maintain optimal reaction conditions. [Application Scenarios] - Temperature measurement within chemical reaction vessels - Monitoring of reaction processes - Temperature management in research and development [Effects of Implementation] - Increased efficiency and yield of reactions - Stabilization of product quality - Enhanced safety of reaction processes

• Other measurement, recording and measuring instruments

In the sterilization process of the pharmaceutical industry, precise temperature management is essential to ensure product quality and safety. If the sterilization temperature is not properly managed, the risk of reduced product efficacy and contamination increases. Sheet-type thermocouples achieve stable temperature measurement due to their large contact area, supporting temperature management in the sterilization process. There are also easy-to-apply seal types available, accommodating temperature measurement in various locations. 【Usage Scenarios】 - Temperature monitoring inside sterilizers - Temperature management in pharmaceutical manufacturing lines - Sterilization validation 【Benefits of Implementation】 - Improved reliability of the sterilization process - Assurance of product quality and safety - Increased efficiency in temperature management

• Other measurement, recording and measuring instruments

In the food industry, accurate temperature records are essential for quality control and ensuring safety. In particular, temperature management during the manufacturing process and storage environment contributes to maintaining product quality, managing expiration dates, and reducing the risk of foodborne illnesses. If the accuracy of temperature measurements is low, it can lead to food deterioration and a decline in quality, potentially resulting in a loss of customer trust. Sheet-type covered thermocouples enable precise temperature measurements in food temperature management and support quality control. 【Usage Scenarios】 - Temperature management on food production lines - Temperature monitoring inside refrigerators and freezers - Temperature recording during food transportation - Temperature measurement of cooking equipment 【Benefits of Implementation】 - Quality maintenance through accurate temperature management - Reduction of food waste - Decreased risk of foodborne illnesses - Quality improvement through the utilization of recorded data

• Other measurement, recording and measuring instruments

In the aerospace engine industry, precise temperature management is essential to balance engine performance and safety. In the high-temperature environment inside the engine, accurate temperature measurement using thermocouples leads to efficient engine operation and anomaly detection. Inaccurate temperature measurements can result in decreased engine performance and, in the worst case, serious accidents. Our sheet-type coated thermocouples accurately measure temperatures inside the engine, supporting safe flight. 【Application Scenarios】 - Engine combustion chamber - Turbine blades - Exhaust system 【Benefits of Implementation】 - Optimization of engine performance - Enhanced safety through anomaly detection - Improved durability

• Other measurement, recording and measuring instruments

In the automotive industry, accurate temperature measurement is essential for exhaust gas measurement. The temperature of exhaust gases is an important indicator for evaluating the efficiency of catalysts and the combustion state of engines. Low accuracy in temperature measurement can hinder the assessment of compliance with exhaust gas regulations and the optimization of fuel efficiency. Sheet-type covered thermocouples achieve stable temperature measurement due to their large contact area, contributing to improved accuracy in exhaust gas measurement. 【Application Scenarios】 - Exhaust gas temperature measurement - Temperature management of catalytic converters - Temperature monitoring of engine exhaust systems 【Effects of Implementation】 - Improved accuracy of exhaust gas analysis through precise temperature measurement - Increased reliability of compliance assessment with exhaust gas regulations - Contribution to improved fuel efficiency

• Other measurement, recording and measuring instruments

In the semiconductor manufacturing industry, precise temperature management in high-temperature environments is essential to ensure product quality and reliability. In particular, CPUs and other electronic components are exposed to high temperatures during operation, so the accuracy of temperature management significantly affects product performance. Inadequate temperature management can lead to component failures or performance degradation. Our sheet-type coated thermocouples can easily measure temperature even in narrow spaces, such as gaps between CPU surfaces and substrates. 【Usage Scenarios】 - Temperature measurement of CPUs - Temperature measurement of substrates - Temperature measurement of electronic components in high-temperature environments 【Benefits of Implementation】 - Improved product quality through accurate temperature measurement - Reduced risk of failure - Optimization of temperature design in product development

• Other measurement, recording and measuring instruments

In the marine resource extraction industry, accurately understanding the light environment on the seabed is crucial for resource exploration and environmental impact assessments. The transmission rate and distribution of light influence the biodiversity of the seabed and the impact of extraction activities, necessitating precise data collection. While long-term continuous measurements are not required, our underwater illuminance meter rental service is ideal for obtaining detailed data over a short period. 【Usage Scenarios】 - Measurement of the light environment in seabed resource exploration - Environmental impact assessments in extraction activities - Seabed topography surveys 【Benefits of Implementation】 - Costs can be reduced as it can be used only for the necessary duration. - Measurements can be easily taken without specialized knowledge. - Analysis based on accurate data becomes possible.

• Other environmental analysis equipment

In the world of diving, the underwater light environment significantly affects the beauty of underwater landscapes and the observation of marine life. In particular, the way light penetrates varies depending on the depth of the diving spot and the time of day, making accurate illuminance measurements helpful for safe diving planning and improving the quality of underwater photography. While long-term measurements are not necessary, our underwater illuminance meter rental service is ideal for obtaining detailed data in a short period. 【Usage Scenarios】 - Illuminance measurement at various depths of diving spots - Light adjustment in underwater photography - Safety management in diving tours 【Benefits of Implementation】 - Cost savings as it can be used only for the necessary duration. - Easy measurement without specialized knowledge. - Enables analysis based on accurate data.

• Other environmental analysis equipment

In research on oceans and lakes conducted by educational institutions, accurate measurement of the underwater light environment is essential. The light environment significantly impacts aquatic ecosystems and water quality, necessitating precise data collection. While long-term continuous measurements are not required, our underwater illuminance meter rental service is ideal for obtaining detailed data over a short period. 【Usage Scenarios】 - Measurement of the light environment in marine surveys - Water quality surveys in lakes - Light management in aquaculture farms 【Benefits of Implementation】 - Costs can be reduced as it can be used only for the necessary duration. - Measurements can be easily taken without specialized knowledge. - Analysis based on accurate data becomes possible.

• Other environmental analysis equipment

In submarine operations, the underwater light environment is one of the important factors. To maintain the stealth performance of submarines, it is necessary to accurately grasp the information of external light and take countermeasures. Underwater light meters contribute to the safe navigation and confidentiality of submarines. Our underwater light meter rental service supports the investigation of the light environment in submarine operations. 【Usage Scenarios】 - Measurement of light levels at submarine diving depths - Evaluation of submarine visibility underwater - Assessment of submarine stealth performance 【Benefits of Implementation】 - Reduction of risks in submarine operations - Development of more effective countermeasures based on accurate data - Cost savings as it can be used only for the necessary duration.

• Other environmental analysis equipment

In resource exploration for oil development, data regarding the underwater light environment is crucial for understanding seabed topography and geological structures. In particular, information on light transmittance and scattering is essential for detailed analysis of seabed conditions. Accurate data collection contributes to the efficient exploration and development of resources. While long-term continuous measurements are not necessary, our underwater illuminance meter rental service is ideal for obtaining detailed data in a short period. 【Usage Scenarios】 - Measurement of light environment in seabed topography surveys - Water quality surveys in marine resource exploration 【Benefits of Implementation】 - Costs can be reduced as it can be used only for the necessary duration. - Measurements can be easily taken without specialized knowledge. - Analysis based on accurate data becomes possible.

• Other environmental analysis equipment

In archaeological site surveys, the underwater light environment can be an important clue. The underwater light environment affects the preservation state of the site and the visibility of artifacts submerged in water, necessitating accurate illuminance measurements. While continuous measurements over long periods are not required, our underwater illuminance meter rental service is ideal for obtaining detailed data over a short period. 【Usage Scenarios】 - Measurement of the light environment in underwater ruins - Investigation of underwater artifacts - Water quality surveys around archaeological sites 【Benefits of Implementation】 - Costs can be reduced as it can be used only for the necessary duration. - Measurements can be easily taken without specialized knowledge. - Analysis based on accurate data becomes possible.

• Other environmental analysis equipment

In the tourism industry, accurately understanding the underwater light environment is crucial to maximize the appeal of underwater landscapes. Underwater landscapes significantly impact tourist satisfaction and the acquisition of repeat visitors. The underwater light environment fluctuates greatly depending on the time of day and weather conditions, necessitating detailed data collection. While long-term continuous measurements are not required, our underwater illuminance meter rental service is ideal for obtaining detailed data in a short period. 【Usage Scenarios】 - Investigation of underwater landscapes at diving spots - Measurement of light levels in aquarium exhibition environments - Assessment of underwater lighting effects at tourist destinations 【Benefits of Implementation】 - Quantifying the appeal of underwater landscapes contributes to effective information dissemination - Providing new value to tourists - Contributing to increased attraction power

• Other environmental analysis equipment

In the confirmation of submarine cable installation, the underwater light environment is an important factor. Understanding the light conditions at the installation site and its surrounding environment is essential for evaluating the durability and performance of the cable. Accurate data on the light environment is also beneficial for long-term cable operation planning. While continuous measurement over an extended period is not necessary, our underwater illuminance meter rental service is ideal for obtaining detailed data in a short time. 【Usage Scenarios】 - Measurement of the light environment during submarine cable installation - Investigation of the impact on surrounding marine life - Understanding changes in light levels at different depths 【Benefits of Implementation】 - Costs can be reduced as it can be used only for the necessary duration. - Measurements can be easily taken without specialized knowledge. - Analysis based on accurate data becomes possible.

• Other environmental analysis equipment

In harbor construction, underwater visibility significantly affects work efficiency. Underwater tasks are influenced by the accessibility of light, which impacts safety and work precision, making accurate illuminance measurement essential. Particularly in dark underwater operations such as dredging and inspecting underwater structures, understanding the appropriate lighting environment is crucial. Our underwater illuminance meter rental service allows for the acquisition of detailed lighting environment data in a short period, contributing to improved work efficiency. 【Usage Scenarios】 - Dredging operations within the harbor - Inspection of underwater structures - Safety management during underwater work 【Benefits of Implementation】 - Costs can be reduced as it can be used only for the necessary duration. - Measurements can be easily taken without specialized knowledge. - It enables the planning of work based on accurate data.

• Other environmental analysis equipment

In aquaculture, managing the appropriate light environment significantly impacts the growth of seafood. The intensity and quality of light affect growth rate, appetite, and health, making it a crucial factor that influences yield and quality. Since the light environment fluctuates due to water quality and weather conditions in the aquaculture ponds, accurate understanding of the light environment is required. Our underwater illuminance meter rental service allows for the acquisition of detailed light environment data in a short period, supporting growth management in aquaculture. 【Usage Scenarios】 - Illuminance measurement at different depths of aquaculture ponds - Monitoring changes in light levels during the day - Analyzing the relationship between growth conditions and light environment 【Benefits of Implementation】 - Understanding the optimal light environment for growth - Optimizing feeding - Increasing yield

• Other environmental analysis equipment

For environmental consultants, water quality surveys in pollution monitoring require analysis based on accurate data. The light environment in water affects water quality and ecosystems, necessitating detailed data collection. Our underwater light meter rental service is ideal for obtaining detailed data in a short period. 【Usage Scenarios】 - Measurement of light environment in marine surveys - Water quality surveys in lakes and ponds - Light management in aquaculture 【Benefits of Implementation】 - Cost savings as it can be used only for the necessary duration. - Easy measurement without specialized knowledge. - Enables analysis based on accurate data.

• Other environmental analysis equipment

In ecological surveys within marine biology, accurately understanding the underwater light environment is crucial. Light has a significant impact on the behavior and habitat of marine organisms, making precise data collection essential. While long-term continuous measurements are not necessary, our underwater illuminance meter rental service is ideal for obtaining detailed data over a short period. 【Usage Scenarios】 - Measurement of light environments in marine surveys - Water quality surveys in lakes and ponds - Light management in aquaculture facilities 【Benefits of Implementation】 - Costs can be reduced as it can be used only for the necessary duration. - Measurements can be easily taken without specialized knowledge. - Analysis based on accurate data becomes possible.

• Other environmental analysis equipment

In marine surveys and investigations of light environments in lakes, accurate illuminance measurements are essential. The underwater light environment significantly impacts the ecosystems and water quality of organisms, necessitating precise data collection. While continuous measurements over long periods are not required, our underwater illuminance meter rental service is ideal for obtaining detailed data in a short time. 【Usage Scenarios】 - Measurement of light environments in marine surveys - Water quality investigations in lakes - Light management in aquaculture 【Benefits of Implementation】 - Cost savings by using the service only for the necessary duration. - Easy measurement without the need for specialized knowledge. - Enables analysis based on accurate data.

• Other environmental analysis equipment

A sheet-type thermocouple that uses an ultra-thin film as an insulator. The sheet has a minimum thickness of 0.10mm, enabling precise temperature design for CPUs and other applications. A sticker type that can be easily attached for measurement is also available. ● Achieves stable temperature measurement with a wide contact area ● A type capable of measuring high temperatures up to 300℃ is also available (NS series) ● Lead wires are coated with PFA resin, heat-resistant up to 260℃ ● Direct connection to measuring instruments is possible with integrated lead wires ● Manufactured by Ninomiya Electric Wire Industry Co., Ltd. * Free samples for evaluation are available. Please feel free to contact us. Overview of the product ■ Coating sheet sizes ・Standard: Approximately 20×10mm (approximately 27×10mm) ・Miniature: Approximately 14×10mm (approximately 20×10mm) ■ Sheet thickness ・NS series: 0.15mm (approximately 0.10mm) ・Sticker type: 0.35mm * The values in parentheses are for the high-temperature measurement type. Detailed specifications, examples of product codes for ordering, and actual product examples are available on our product page, so please refer to it as well.

• Other measurement, recording and measuring instruments

It supports three types of thermocouples: K, J, and T (input sensors), allowing measurements with different thermocouple types by swapping them out. The HH-22/23 can connect two thermocouples simultaneously. The display has 5 digits, and the final digit's display (resolution) can be switched between 0.1°C and 1°C.

• Temperature and humidity measuring instruments
• Thermometer

■ Accessories for various connectors Cable clamp Panel bracket Safety clip (10 pieces per bag) Sheath adapter ■ Accessories used for device integration, etc. Connector for printed circuit boards Multi-pin D-SUB connector body Multi-pin D-SUB connector back shell Terminal block Terminal lug / spade lug (crimp terminal) We offer a wide range of accessories tailored to connectors and applications. For compatibility and details, please refer to the "Accessories," "Panel Jack," and "Others" pages on the "Ishikawa Industry Thermocouple Connector Product Site" linked below.

• Temperature and humidity measuring instruments

High-temperature specification with ceramic (alumina) housing. Compact: SHX series, for vacuum atmosphere USHX series Standard: NHX series, for vacuum atmosphere UHX series

• Temperature and humidity measuring instruments

The pin shape is available in a round type that uses a hollow pin from the standard version for stable connections and high durability, as well as types with 3-pin and 4-pin configurations. We also offer a wide range of accessories for installation. Ishikawa Industry's standard connectors include products from various domestic and international manufacturers, such as the GIS series, which is the same specification as OMEGA's "OST/UST," and the NDP series from Ninomiya Electric Wire. We respond quickly to your company's needs and delivery times, and we also propose equivalent and alternative products.

• Temperature and humidity measuring instruments

This is a compact type that achieves high space efficiency. Ishikawa Industry offers a variety of products from both domestic and international manufacturers, including the GIM series, which is the same specification as OMEGA's "SMP," and the NDP series from Ninomiya Electric Wire. In addition to responding quickly to your company's needs and delivery times, we also propose the supply of equivalent and alternative products.

• Temperature and humidity measuring instruments

It is a coaxial structure probe in which ultra-fine thermocouple wires are wrapped in a special ceramic insulator, coated on the surface with thermocouple material, and joined at the tip with a thickness of a few microns.

• Temperature and humidity measuring instruments

The operating temperature varies depending on the environment. For more details, please refer to the "High-Temperature Sheath Thermocouple Series" in the link below: "Ishikawa Industry Thermocouple Sensor Product Site."

• Temperature and humidity measuring instruments