ジョブル List of Products and Services

The HDMI CAT5e transmitter HE01S transmits 1080p video over LAN cables up to 40m (60m for 720P/1080i). It is ideal for transmitting video to large monitors, signage displays, and projectors located away from the equipment. Since LAN cables can be used for transmission, wiring is easy. Just connect the RJ45 connector and the transmitter after wiring, and you're done!

• Image Transmission Equipment
• Other security and surveillance systems
• others

- Distributes the input power to 9 outputs from the terminal block - Each output has a built-in 1.1A resettable fuse (PPTC) - The LED next to each output lights up when power is being supplied normally - Supports DC/AC power supply up to 30V

• power supply
• Other FA equipment
• others

- Long-distance transmission of contact signals from 24 system sensors, switches, etc., using a single optical fiber. - Transmission with VAD-D0024R.L1.TU (transmitter) and VAD-D0024R.L1.RU (receiver). - Capable of transmitting up to 3 km with multimode optical fiber and up to 20 km with single-mode optical fiber. - Usable in a wide temperature range of -20°C to 75°C. - 19-inch rack mount, 1U size. - Compatible with AC 100-240V. - Blocks EMI, RFI, crosstalk, and ground loops.

• Sensors
• Other security and surveillance systems
• others

- 1 video (composite) input and 2 output video distributor (compact type) - Usable with either DC12V or AC24V. Power ON/OFF can be confirmed with a red LED. * The power connection part is a terminal block, allowing for secure fixation. - Includes DC12V power adapter / power jumper cable (55mm)

• Other image-related equipment
• Surveillance Camera System
• others

The AE02GL eliminates one of the major causes of noise in audio systems, which is ground loops, thereby reducing noise. Ground loops occur when two or more devices connected by cables are connected to grounding points with different potentials. The AE02GL minimizes the effects of ground loops with a simple connection.

• others

This is a 16-way distributor for RS485 signals that also supports RS485 or RS232C inputs. The RS485 input is distributed directly, while the RS232C input is converted to RS485 before being distributed. - Signals can be transmitted from each output using a maximum of 1,200m UTP cable - Up to three input lines can be connected (not usable simultaneously) - Communication speed is automatically detected (1200 to 115200 bps) - Power adapter included.

• Other FA equipment
• Other security and surveillance systems
• others

RS008 is an RS485 signal splitter that also supports RS485 and RS232C inputs. The RS485 input is distributed directly, while the RS232C input is converted to RS485 before being distributed. - Signals can be transmitted from each output using a maximum of 1,200m UTP cable - Up to 3 input lines can be connected (not usable simultaneously) - Communication speed is automatically detected (1200 to 115200 bps) - Power adapter included

• Other FA equipment
• Other security and surveillance systems
• others

The VE02DALS is a high-performance receiver for long-distance transmission of VGA (analog RGB) and audio over CAT5e, designed to be used in combination with transmitters such as VE02ALT, VE05ALT, and VE10DAL for VGA (audio) transmission. - It supports analog stereo audio (LINE) and digital audio (S/PDIF coaxial/optical). - It features a color deviation correction function that compensates for differences in UTP cable length (twist density differences) within the CAT5e cable, allowing transmission without the need for distance adjustment adapters in the middle or at the end of the transmission cable. - The maximum resolution for VGA video is 1920x1200 at 60Hz. - The maximum transmission distance is 300m (further extension is also possible). - Both ends of the transmission cable use RJ45, allowing for commercially available LAN cables (straight wiring). - The video gain and brightness can be adjusted with a volume control. - A power adapter is included.

• Other PCs and OA equipment
• Other image-related equipment
• others

- This is a module for inputting and outputting digital signals. - It performs output via relays. - Includes a mounting base for panel and DIN rail.

• Other process controls

RS232C⇔RS485 Bi-directional Converter RS001 - Converts RS232C to RS485 (2-wire half-duplex communication) - The RS232C side connector is a D-sub 9-pin female, which can be directly attached to the RS232C port - Communication speed is automatically recognized (up to 115,200 bps) - Up to 32 RS485 devices can be connected (total wiring length up to 1,200m)

• Other FA equipment
• Other PCs and OA equipment
• others

- Extends 2-wire RS485 signals up to a maximum of 1,200m at both ends. (By receiving and re-outputting the RS485 signal, transmission of up to 2,400m is possible.) - Supports 2-wire half-duplex communication. - Communication speed supports up to a maximum of 115200bps. - Insulation structure up to 2.5kV.

• Other FA equipment
• Other security and surveillance systems
• others

DVI Signal CAT5e Transmitter Compact Type - Transmits DVI-D (single link) over a single CAT5e/6/7 cable. *CAT6 or higher cables are recommended. - Maximum transmission distance is 50m for 1920x1200 and 70m for 1024x768. *For longer distances, the DVI-D long-distance transmitter DE02E (HDCP compatible) can transmit up to 100m. - Set includes DE01ET (PC side) and DE01ER (monitor side). - Both ends of the transmission cable use RJ45, allowing the use of commercially available LAN cables (straight wiring). - No external power supply required. *It operates on power supplied from the DVI port of the video output device, but depending on the connected device, the available power may be insufficient, resulting in a shorter transmission distance. In this case, connect using a USB to micro USB cable (sold separately) or connect a DC5V power adapter SWP051000-1S-PSE (sold separately) or LTE10UW-S1-BS33 (sold separately) to the included micro USB conversion cable.

• Image Transmission Equipment
• Other PCs and OA equipment
• Other security and surveillance systems

HS04 is an HDMI 4-port switcher that switches between four connected HDMI sources to one output. - Maximum resolution is 1920✕1200 or 1080p - Supports both video and audio signals - Compatible with HDMI 1.3a and HDCP - Includes power adapter and infrared remote control

• Other PCs and OA equipment

The HE02E transmits HDMI signals over LAN cables up to 100 meters. It can connect game consoles and Blu-ray players to AV amplifiers/HD TVs located at a distance. - Transmits HDMI over CAT5e/6/6a/7 UTP/STP cables up to 100 meters (CAT6 or higher recommended) - Includes HE02ET (transmitter), HE02ER (receiver), and power adapter - Both ends of the transmission cable can use commercially available LAN cables (straight wiring) with RJ45 connectors - Supports HDMI 1.4, capable of transmitting 3D and 4K at 30Hz - Compatible with HDCP 2.2/1.4 - Compliant with HDBaseT * Please use CAT6 or higher cables when displaying video at 1080p 60Hz or higher. * If utilizing the transmission performance of HDMI 1.4 (10.2Gbps), please use CAT6a or higher cables.

• Other PCs and OA equipment
• Other security and surveillance systems
• others

The TTP111AV-K transmits composite video and stereo audio (LINE) over a single LAN cable for long-distance transmission. The model TTP111AV-K is a set of two video + audio transmitters "TTP111AV," which can be easily connected at both ends of the LAN cable (RJ45) for transmission. The transmitter is a passive type and does not require a power supply.

• Other security and surveillance systems
• Surveillance Camera System
• Other image-related equipment

- This is a high-sensitivity microphone with a built-in amplifier that operates on DC12V. - The microphone itself is integrated with a voice/power cable (440mm). - It can be easily added for installation and is ideal for security and business management purposes.

• Surveillance Cameras

This is a cable for surveillance cameras that has a built-in small microphone. It can be used to connect the video and power (DC12V) of the surveillance camera. - It features a high-sensitivity microphone with a built-in amplifier that operates on DC12V. - It allows for audio output (LINE level) in addition to the video and power (DC12V) cable of the surveillance camera. - It is suitable for adding a microphone to an existing camera, among other uses. *The microphone operates using the camera's power supply (DC12V).

• Surveillance Cameras

AD001H is a converter (up-scan converter) that converts composite video to VGA video. - Converts composite video to VGA (analog RGB) - Supports NTSC / PAL video signals - Equipped with loop output for input video - Features deinterlacing function - Brightness, contrast, saturation, and hue can be adjusted via OSD - Effective for displaying camera video on a PC monitor

• Other PCs and OA equipment
• Other image-related equipment
• others

VC01 is a down-scan converter that converts VGA (analog RGB) to composite (NTSC, etc.) video. - Supported standards are NTSC/PAL (switchable) - Input signal supports up to 1920×1200p 60Hz *Note: In interlaced mode, part of the screen may be cut off. - Equipped with a loop output for the input video signal (VGA) - Configuration function via OSD - Output video can adjust horizontal/vertical size, brightness, contrast, saturation, hue, and sharpness.

• Other PCs and OA equipment
• Other image-related equipment
• Other security and surveillance systems

VGA/Analog/Digital Audio to HDMI Converter - Converts VGA (Analog RGB) and stereo audio (LINE) or digital audio (S/PDIF coaxial) to HDMI - Supported resolutions: 640x480, 800x600, 1024x768, 1280x960, 1280x1024, 1360x768, 1440x900, 1600x1200, 1920x1080 - Equipped with loop output for video/audio signals before conversion - Digital audio supports only 48k 16bit LPCM - Connection ports: VGA: Mini D-sub 15 female, Power: DC jack (Φ2.1✕5.5mm), Analog audio: Stereo mini jack, HDMI: Type A, S/PDIF coaxial: RCA female, S/PDIF optical: square - Power adapter included

• Other image-related equipment
• Other security and surveillance systems
• others

- Transmits VGA (analog RGB) up to 300m with a single CAT5e/6 cable - Maximum resolution is 1600✕1200 at 85Hz - Includes TTA111VGA-T (PC side), TTA111VGA-R (monitor side), and power adapter - Both ends of the transmission cable use RJ45, allowing for commercially available LAN cables (straight wiring) to be used (install the included distance adjustment adapter at the midpoint and end of the wiring to accommodate length differences between UTPs.) * If you cannot install the distance adjustment adapter in the wiring or if color misalignment persists even after installation, please use a cable where all four pairs are of the same length or use the high-performance receiver VE02DALS with color misalignment correction function on the monitor side. (You can also specify the combination of TTA111VGA-T (transmitter) + VE02DALS (high-performance receiver) when ordering.) * If the resolution used is 1920✕1200 at 60Hz, please use the combination of VE02ALT (transmitter) + VE02DALS (receiver).

• Other PCs and OA equipment

Transmission using optical fiber supports long-distance transmission (up to 30 km) and has the characteristic of being less affected by surrounding noise sources. It allows for wiring in vast areas, long-distance wiring from remote locations, wiring in noisy factory environments, and wiring adjacent to power lines or signal lines that generate noise, all while maintaining signal quality. Additionally, since transmission does not use electricity, it does not introduce noise even when wired near devices that are susceptible to electromagnetic interference. Optical fiber cables can be connected in single-mode or multi-mode, with ST connectors as the terminal. (Various conversion connectors are also available.) The VAD-D008R.L1.x transmits 8 channels of voltage/non-voltage contacts over single-mode fiber up to 30 km and multi-mode fiber up to 3 km. At the transmission destination, it outputs signals via non-voltage contact signals (relay output). Being card-type, it can be housed in a standalone installation case for installation in control panels, or it can be used in combination with multiple card types housed in a 19-inch rack mount chassis. (Optional)

• Surveillance Camera System
• others
• Remote Control

VAD-D403A.L1.T.235 /R.235 transmits four channels of composite video and RS232C/RS422/RS485 over a single optical fiber for long-distance multiplex transmission. The use of optical fiber for transmission supports long distances (up to 30 km) and is less susceptible to interference from surrounding noise sources. It enables transmission while maintaining signal quality in wiring across vast areas, long-distance wiring from remote locations, wiring in noisy factory environments, and wiring adjacent to power lines or signal lines that generate noise. Additionally, it can be used in a wide temperature range of -20 to 75°C. The optical fiber is single-mode, and the connection terminal is an ST connector. (Please consult us if a conversion connector is needed.)

• Surveillance Camera System
• Other image-related equipment
• others

The 10/100M Ethernet signal is transmitted over optical fiber for long distances. Transmission using optical fiber supports long-distance transmission (up to 20 km) and has the characteristic of being less affected by surrounding noise sources. It enables transmission while maintaining signal quality for wiring in vast areas, long-distance wiring from remote locations, wiring in noisy factories, and wiring adjacent to power lines or signal lines that generate noise. Furthermore, since it does not use electricity for transmission, it does not introduce noise even when wired near devices that are easily affected by electromagnetic interference. The VAD-SD001E.L1.xxx transmits a single channel of 10/100M Ethernet over single-mode optical fiber for up to 20 km and over multi-mode optical fiber for up to 2 km, making it effective for LAN connections to distant locations. It operates within a temperature range of 0°C to 70°C, making it suitable for operation in harsh environments.

• Surveillance Camera System
• LAN construction and wiring work
• others

The 10/100M Ethernet signal is transmitted over long distances using optical fiber. Transmission using optical fiber supports long-distance transmission (up to 20 km) and is less susceptible to interference from surrounding noise sources. It enables wiring in vast areas, long-distance wiring from remote locations, wiring in noisy factory environments, and wiring adjacent to power lines or signal lines that generate noise, all while maintaining signal quality. Additionally, since transmission does not use electricity, wiring near devices that are easily affected by electromagnetic interference does not introduce noise. Optical fiber supports single-mode/multi-mode, and the connection terminal is an SC connector. (Please consult us if conversion connectors or other accessories are needed.) The VAD-SD001E.L2.TRC transmits a single channel of 10/100M Ethernet over two single-mode optical fibers for a maximum distance of 20 km, and over two multi-mode optical fibers for a maximum distance of 2 km. It is effective for LAN connections with remote locations. Two VAD-SD001E.L2.TRC units are used in opposition for transmission.

• Surveillance Camera System
• LAN construction and wiring work
• others

By using this RF modulator AVM-138, you only need to prepare the required number of digital terrestrial tuners to display digital terrestrial programs on all existing analog TVs. (The picture quality is not high definition but at the level of conventional analog broadcasts.) Not only digital terrestrial broadcasts, but also the distribution of multiple camera images and DVD video/audio can be easily done with a single coaxial cable. The operation on a TV with an antenna cable connected is simply changing the channel as usual. There is no problem even with TVs that do not support CATV. VHF/UHF channels can also be set. Please use the "AVM-138" for easy RF conversion of composite video.

• Image Transmission Equipment

This is a module for converting RS232C to RS422/485, USB to RS232C/422/485, and an RS422/485 repeater. It can be mounted on a panel and DIN rail.

• Remote Control

It is an I/O module that acquires and outputs digital/analog signals from various sensors/switches. It can be mounted on a panel and DIN rail.

• controller

Composite video and audio are converted to RF and transmitted via coaxial cable. By changing the frequency channel used for this conversion for each video, multiple videos can be transmitted over a single coaxial cable. The mechanism is similar to that of cable television. Using this method, it is possible to transmit video and audio equivalent to up to about 60 channels over a single coaxial cable for distances of up to 250 to 800 meters (when using 5C-2V). (This varies depending on frequency, etc.) A dedicated demodulator, the "DM-100S," is used for demodulation.

• Image Transmission Equipment

The video and audio are converted to RF and transmitted via coaxial cable. The DM-100S is an RF transmission demodulator that restores the video and audio (mono) transmitted after modulation to composite video signals and audio signals (line level). By changing the frequency channel used for RF conversion for each video, multiple videos can be transmitted over a single coaxial cable in combination with the MD-500 (RF transmission modulator). The mechanism is the same as that of cable television. Using this method, it is possible to transmit video and audio equivalent to approximately 60 channels over a single coaxial cable for distances of up to 250 to 800 meters (when using 5C-2V). (This varies depending on the frequency.)

• Image Transmission Equipment
• Other security and surveillance systems
• others

- Converts RS232C TXD/RXD to RS422/485 and vice versa. (EX9520/R supports only RS485) - Supports communication speeds of up to 115200 bps. - The communication status can be checked by LED blinking. - Operates with a power supply of DC10V to DC30V. (Power supply not included) - Includes brackets for DIN rail mounting and panel mounting.

• Other process controls

- This is a repeater that enables a total transmission distance of 2,400m on both sides by re-extending RS422/485 signals. (EX9510 supports RS485 only) - It supports a communication speed of up to 115200bps. - The communication status can be checked with LED blinking. - It operates with a power supply of DC10V to DC30V. (Power supply is not included) - Brackets for DIN rail mounting and panel mounting are included.

• Other FA equipment

High voltage surges caused by induced lightning, such as from lightning strikes, can damage video equipment like cameras and DVRs. The surge protector is designed to block high voltage surges, such as induced lightning, that travel through this cable and protect the equipment. It is installed at both ends of the cable used for transmission. The SP001P-AC110 is a surge protector for AC 100V equipment such as surveillance cameras. The power connection is via a terminal block.

• Other safety equipment
• others
• Other security and surveillance systems

High voltage surges caused by induced lightning, such as from lightning strikes, can damage video equipment like cameras and DVRs. The surge protector is designed to block the induced lightning that travels through this cable and protect the equipment. The SP001P is a surge protector for AC/DC power supplies. It allows passage of up to AC 40V and DC 56V. The power connection is via a terminal block.

• Other safety equipment
• others
• Other security and surveillance systems

High voltage surges caused by induced lightning, such as from lightning strikes, can damage video equipment like cameras and DVRs. A surge protector is used to block induced lightning and protect the equipment. It is installed at both ends of a long transmission cable used for transmission. The SP001VP is a surge protector that can be used with AHD/HD-TVI/HDCVI/composite video and camera power. The camera power can handle a maximum of AC 40V and DC 56V (it allows power sources below AC 40V and DC 56V to pass through).

• Other safety equipment
• others
• Other security and surveillance systems

Due to the occurrence of induced lightning caused by lightning strikes, video equipment such as surveillance cameras and DVRs may be damaged. The surge protector is designed to block the induced lightning that travels through this cable and protect the equipment. It is used by being installed at both ends of a long transmission cable used for transmission. The SP001VPD is a device that adds protection for signal lines (such as RS485 and sensors) to the SP001VP (for video and power). It simultaneously protects video (compatible with AHD/HD-TVI/HDCVI/composite), power, and signal lines. The connections for the signal and power lines are made via terminal blocks. - Control signals such as RS485 and contact signals (2-wire type) are protected. - The camera power can be used with a maximum of AC40V and DC56V (it allows power below AC40V and DC56V to pass through).

• Other FA equipment
• Other security and surveillance systems
• others

The twisted pair video transmitter can transmit camera images and other data using UTP cables such as LAN cables. It is thinner and more flexible than coaxial cable wiring, making installation easier. The passive type twisted pair transmitter does not require power and can transmit color video up to 300 meters. The TTP111VE converts composite video output (BNC) into a signal for twisted pair or converts a twisted pair signal back into a composite video signal (dual-purpose for both transmission and reception). The twisted pair side has a terminal block, allowing any twisted pair cable to be connected for use. It is compact and can be connected side by side in areas where multiple BNC terminals, such as DVRs, are densely packed.

• Image Transmission Equipment

The "GB001" is a ground loop isolator that eliminates ground loops. It also features a video balancer function to adjust the balance of video signals, reducing noise in composite video caused by these issues. - It is easy to connect with BNC male connectors on both ends. *A BNC female to BNC female conversion connector is included. - It prevents distortion of video signals caused by ground loops. - It has a built-in balanced circuit that adjusts impedance, making it suitable for input to devices like DVRs. - It includes a transient current protection function. - No power supply is required. *It is designed for composite video and does not support analog HD video signals. *It cannot be used if power is superimposed on the coaxial cable. *The operation of coaxial superimposed control signals (such as UTC) is not guaranteed.

• Other FA equipment

If a camera is installed in a location or building away from the monitor installation site, there may be a situation where current flows through the video cable due to different potentials at each grounding point (ground loop). This ground loop not only allows current to flow but also introduces noise from nearby devices, causing distortion and noise. The device that interrupts this ground loop and restores clean video is called a ground loop isolator. The TGP001H is a low-loss type of video transformer that suppresses ground loop noise generated when transmitting composite video using twisted pair cables. It is a product that adds the functionality of a twisted pair transmitter (passive type) to the GL001H designed for coaxial cables.

• Surveillance Camera System

Devices connected by metal cables may be damaged by high-voltage surges caused by induced lightning during a thunderstorm. The overcurrent protection device (surge protector) is designed to block induced lightning and other surges that travel through this cable to protect the equipment. It is used by installing it at both ends of the long cable used for transmission. The SP006P is a surge protector for 10/100M networks that supports power transmission via PoE/PoE Plus (the connection terminal is RJ45). *"SP006P-K" is the model number for a set of two surge protectors "SP006P."

• Other safety equipment
• LAN construction and wiring work
• Other security and surveillance systems