山里産業 List of Products and Services

"FurnaceSpection SD/MB" is an in-furnace thermal imaging system for temperature monitoring of heat treatment processes inside the furnace. It features a built-in thermal imaging camera (MCS640) with a measurement wavelength of 0.85μm, 640x480 pixels, and 60 frames/sec. The SD model includes an automatic retraction function to protect the camera in case of abnormalities. 【Features】 ■ Enables preventive maintenance of equipment by monitoring the furnace ■ Quickly and accurately detects process anomalies in real-time ■ Capable of supporting a wide range of applications ■ Excels in measuring the temperature of products heated by natural gas and the temperature of refractory materials *For more details, please refer to the PDF document or feel free to contact us.

• Other image-related equipment

The "BoilerSpection SD/MB" is a combustion imaging system that incorporates a thermal imaging camera (MC320) with a measurement wavelength of 3.9μm, 320x240 pixels, and 30 frames per second. The SD model features an automatic retreat function to protect the camera in case of abnormalities. Up to 24 cameras can be connected to a single server. Please feel free to contact us if you need assistance. 【Features】 ■ Provides images of the boiler's processing state ■ Enhances combustion efficiency ■ Reduces maintenance costs ■ Optimizes fuel switching ■ Manages combustion *For more details, please refer to the PDF materials or feel free to contact us.

• Other image-related equipment

"BoilerSpection" is a thermal imaging device for monitoring the inside of incinerators, allowing for extensive observation of conditions within the furnace by inserting the lens section into the incinerator. It can penetrate flames to monitor the state of waste input (such as uneven distribution, waste depletion, and burnout points), achieving a balanced incineration state. Additionally, it enables real-time monitoring of temperature distribution, contributing to the reduction of waste incineration time and improvement of combustion efficiency. 【Features】 ■ Allows for extensive observation of conditions inside the incinerator ■ Achieves a balanced incineration state ■ Contributes to the reduction of waste incineration time and improvement of combustion efficiency *For more details, please refer to the related links or feel free to contact us.

• Other image-related equipment

The system (MCL640 + visible camera) recognizes the slag area on the surface of the melting furnace by temperature, and by combining this information with equipment (including robots), it enables the automation of slag removal operations. By automating the slag removal process, the safety of workers is ensured, and by removing slag based on the information from the thermal imaging camera, the quality of the products is stabilized. Please feel free to contact us when you need assistance. 【Features】 ■ Automation of slag removal operations is possible ■ Product quality is stabilized *For more details, please refer to the related links or feel free to contact us.

• Other image-related equipment

"BoilerSpection" is an internal monitoring thermal imaging device for boilers that allows for extensive observation of conditions inside the boiler by inserting the lens section into the boiler. Normally, it is not possible to visually inspect the interior due to flames; however, this device employs elements that can penetrate flames, allowing for internal observation through the flames. This enables monitoring of the accumulation state of clinkers in the tubes, achieving efficient tube cleaning. 【Features】 ■ A system that incorporates a borescope lens into an IR camera ■ A cooling system is integrated for continuous monitoring, protecting the main unit ■ Data is sent to the control room via a switch cabinet that allows switching between cameras in the field ■ Real-time monitoring on a server located in the control room via Ethernet connection *For more details, please refer to the related links or feel free to contact us.

• Other image-related equipment

The "IS50-LO/GL" is a fiber optic thermometer equipped with a blackbody tube for glass melting furnaces, which achieves accurate temperature measurement by applying blackbody paint to the bottom surface of a ceramic tube with a platinum cap inserted into the furnace bottom, simulating a blackbody and capturing infrared radiation from that spot. Since it is fiber optic, cooling of the device is unnecessary at around 200°C. By implementing this system, we propose significant cost savings. Please feel free to contact us if you have any inquiries. 【Features】 ■ Achieves accurate temperature measurement ■ Cooling of the device is unnecessary at around 200°C ■ Cost reduction is possible *For more details, please refer to the related links or feel free to contact us.

• Thermometer

The "ISR12-LO・IGAR12-LO" is a two-color radiation thermometer for laser processing temperature measurement that can be mounted on equipment by using a compact lens and fiber method. Once the measurement position is aligned, continuous temperature measurement is possible. It achieves accurate temperature measurement with a fast response by measuring infrared at pinpoint locations. By adjusting the intensity of the laser, efficient irradiation is realized. Please feel free to contact us when you need assistance. 【Features】 ■ Can be mounted on equipment ■ Continuous temperature measurement is possible ■ Achieves accurate temperature measurement with fast response *For more details, please refer to the related links or feel free to contact us.

• Thermometer

"Photrix" is a dedicated thermometer for semiconductor devices that allows temperature measurement by using light pipes made of quartz or sapphire, which can be installed near the target object within a vacuum device. While regular window glass requires maintenance, this product's light pipe type enables easy and maintenance-free temperature measurement. It also supports fiber-type radiation thermometers that work through window glass. [Features] - The light pipe type allows for easy and maintenance-free temperature measurement. - It also supports fiber-type radiation thermometers that work through window glass. *For more details, please refer to the related links or feel free to contact us.

• Thermometer

The "m924 OEM" is a fluorescent fiber optic thermometer that eliminates metal materials, making it unaffected by high voltage and high frequency. It is used in the same way as contact-type thermometers such as thermocouples and resistance temperature detectors, making it suitable for temperature measurement in heavy electrical equipment and magnetic fields (such as medical devices). Additionally, it enables temperature distribution measurement at multiple points (52 points) for wafer surface temperature measurement. 【Features】 ■ 52 sensing points ■ Measures ambient temperatures up to 300°C ■ Resistance to RF and microwave radiation *For more details, please refer to the related links or feel free to contact us.

• Thermometer

The "IPE140/39" is a radiation thermometer specifically designed to measure combustion gases (CO2 gas) at a position just before the boiler equipment using opaque elements (4.0 to 4.5μm) from the incineration equipment, allowing for the confirmation of indicators for controlling the combustion state within the furnace. It is also capable of measuring CO2 gas temperature. Our company uses this product to achieve temperature measurement of combustion gases. Please feel free to contact us when you need assistance. 【Features】 ■ Achieves temperature measurement ■ Allows confirmation of indicators for controlling the combustion state within the furnace ■ Capable of measuring CO2 gas temperature *For more details, please refer to the related links or feel free to contact us.

• Thermometer

This product is a compensation wire that can reduce costs without extending expensive thermocouples, even when the temperature measurement point and the measurement point are far apart. Based on many years of experience and achievements as a temperature sensor manufacturer, we offer a comprehensive proposal for thermocouples and suitable products. In high-temperature environments or under harsh conditions where wiring is not possible, the use of M.I. cables can be accommodated. 【Features】 ■Cost reduction ■Total proposal ■Support for special conditions *For more details, please refer to the related links or feel free to contact us.

• cable

The 'milliK' handled by Yamazato Industry is a temperature indicator that achieves high-precision measurement and calibration of platinum resistance thermometers (PRT), thermistors, thermocouples, and transmitters (4-20mA) in the range of -270℃ to 1820℃. With its robust design and capability to operate on AC or DC, it is suitable for use in laboratories, testing rooms, and outdoors. The display resolution is 0.0001℃ (0.1mK), with a measurement resolution of just 28μΩ, made possible by a powerful sigma-delta analog-to-digital converter that corresponds to 0.00007℃ (0.07mK) when using PRT input. Additionally, the internal memory can store data for over six months, and by using a USB memory stick, continuous logging is also possible. 【Features】 ■ System control possible in series with drive locks, liquid baths, and furnaces ■ Wide range of compatible sensors ■ Elimination of thermal electromotive force errors ■ High safety ■ High precision *For more details, please refer to the catalog or feel free to contact us.

• Thermometer

The "Jupiter 4852" handled by Yamazato Industry is a portable medium-temperature calibration device designed for the calibration/testing of industrial thermocouples and temperature sensors, achieving a wide temperature range of up to 660°C. In addition to quickly achieving the set temperature, the advanced model now allows for confirmation and recording of input instructions for the test sensors. Additional options are available for the calibration of radiation thermometers and surface thermometers. 【Features】 ■ Achieves a wide temperature range of up to 660°C ■ Quickly achieves the set temperature ■ Allows for confirmation and recording of input instructions for test sensors *For more details, please refer to the catalog or feel free to contact us.

• Thermometer

The 'Libra 785' handled by Yamazato Industry is a liquid bath that provides a high-quality heat source more suitable for temperature calibration than general-purpose liquid baths. It features a physically separated structure for the heating/cooling chamber and the calibration chamber, and by equipping it with a high-performance temperature controller, it achieves a very small calibration uncertainty of <1mK. While the maximum insertion length of the bath is secured at 485mm, the amount of heat transfer fluid (silicone oil) is approximately 8.5 liters, allowing for operation at a lower cost compared to typical liquid baths. 【Features】 ■ Maintains uniform flow and temperature ■ Maximum insertion length secured at 485mm ■ Can be operated at a low cost ■ Equipped with a high-performance temperature controller ■ Parallel tubes have high thermal insulation properties *For more details, please refer to the catalog or feel free to contact us.

• Mixer/agitator
• Thermometer

The "Pegasus 4853" handled by Yamazato Industry is a device designed for the high-precision calibration of precious metal thermocouples and metal sheath type thermocouples. It achieves high practicality with a portable design that allows measurements up to 1200°C. It features an electric furnace design for reproducible temperature calibration and reduced uncertainty. 【Features】 ■ Ideal for calibrating high-temperature thermocouples ■ Heater arrangement designed and verified specifically for calibration with thermal gradients ■ Capable of loop calibration with a single unit (advanced model) ■ Blackbody option available for calibrating uniform temperature blocks/radiation thermometers *For more details, please refer to the catalog or feel free to contact us.

• Thermometer

The "Handheld TTI-10" handled by Yamazato Industry is a high-precision digital thermometer that can communicate with a PC via a USB cable. It can be easily calibrated in conjunction with the temperature sensor, and the battery lasts for 20 hours. You can check the maximum (max), minimum (min), and average (ave) temperature data. Additionally, measurements using software allow for simultaneous display of temperature data on the PC and logging. 【Features】 ■ Logging possible using a PC ■ High resolution of 0.001℃ ■ Usable for 20 hours with a 9V battery *For more details, please refer to the catalog or feel free to contact us.

• Thermometer

It is a high-precision indicator for temperature resistance sensors, thermistors, and thermocouples. It provides universal and top-class accuracy.

• Temperature and humidity measuring instruments
• Voltage Meter
• Thermometer

You can register calibration information for the standard platinum resistance thermometer model 30. Inputs for Pt100Ω and SPRT 25.5Ω/100Ω are possible. Communication functions include RS232C (can be used with dedicated measurement software) and Ethernet (for monitoring via local area connection). It can be used in combination with ISOTECH temperature calibration devices.

• Temperature and humidity measuring instruments
• Thermometer
• Data Logger

It is a fixed-point furnace that is robust, easy to transport, and integrates a heater that compensates for the thermal conduction error of the probe with a fixed-point cell. The technology for fixed-point calibration from public calibration institutions is gradually spreading to private organizations. However, conventional fixed-point furnaces are extremely expensive, and implementation may not be possible if the probe is short. Additionally, low-cost fixed-point realization devices with small cell shapes have inferior realization accuracy compared to devices from public institutions. The IsoTower ensures the necessary probe insertion length typically required by standards.

• Temperature and humidity measuring instruments