タキエンジニアリング List of Products and Services

The oil that has become an emulsion is a state of oil where oil particles have been refined due to ultrasonic waves or friction on sliding surfaces. The oil-water separation filter 'FP-ZE type' is capable of removing oil components that are difficult to eliminate with oil skimmers and similar devices, which have become emulsified in water. [Applications] ■ Oil-water separation of emulsified oil in cleaning water ■ Oil-water separation in ultrasonic tanks ■ Oil-water separation of drain wastewater ■ Oil-water separation of bilge water in vessels ■ Oil-water separation in vehicle cleaning water (Note: De-emulsification may be difficult under certain conditions, such as when additives like surfactants are present.) *For more details, please download the PDF or feel free to contact us.

• filter

The oil that has become an emulsion is in a state where oil particles have been refined due to ultrasonic waves or friction at sliding surfaces. Such oil cannot achieve a difference in specific gravity with water, resulting in an emulsion (emulsified) state without separating from water. The oil removal filter adsorbs tiny oil particles in an emulsion state onto the surface fibers of the filter. Tiny oil particles continue to adhere to the fiber surface, gradually increasing in size, and once they exceed a certain size, they detach from the fiber surface due to the force of the water flow and flow out to the secondary side of the filter. At this time, the oil particles that have flowed out are larger than several micrometers in diameter, making them easily separable from water and causing them to float. As a result, the oil particles that were in an emulsion state on the primary side of the filter are separated from water on the secondary side due to the difference in specific gravity.

• Liquid-liquid separation filter
• Oil-water separator
• Wastewater/wastewater treatment equipment

The "TUS Series" offers a wide range of ultraviolet sterilization devices, from small flow types with a processing capacity of 11L/min to large flow types with a capacity of 2360L/min. You can select the appropriate unit from a diverse lineup. The ultraviolet sterilization device "TUS Series" uses an electronic stabilizer equipped with an LCD, which includes standard features such as a lamp failure alarm and a day count display. Additionally, it is possible to add functions with a variety of options, such as ultraviolet intensity sensors and remote alarm modules. The specially designed UV lamp maintains high output while providing a longer lamp life than conventional products, continuously irradiating ultraviolet light to sterilize bacteria in water. 【Features】 ■ Clean sterilization using ultraviolet light ■ The main sterilization tube is made of corrosion-resistant stainless steel ■ Display via LCD ■ Uses high-output, high-performance UV lamps ■ Compatible with both small and large flow rates *For more details, please refer to the PDF document or feel free to contact us.

• Other water treatment equipment
• Ultraviolet irradiation equipment
• Water treatment equipment

ZETAMAX is a filtration material that uses a special filtration fiber with a positive potential (positive charge) to adsorb and remove microparticles with a negative potential (negative charge) present in liquids. By utilizing the potential difference, it efficiently removes viscous substances that are difficult to eliminate using conventional physical filtration methods with regular membranes, as well as nano-level colloidal particles that are hard to adsorb with activated carbon or zeolite. 【Features】 - Capable of removing water-soluble cutting oils, compressor oils, and hydraulic oils from liquids - Easy maintenance - Strong adsorption due to potential difference, preventing outflow to the downstream side *For more details, please download the PDF or feel free to contact us. *We also have a simple test kit (syringe set) available to check in advance whether adsorption removal is possible.

• filter
• Other filters
• Filtration Equipment

The charge-adsorbing filtration fiber "ZetaMax" has a positive surface potential in the liquid. Particles dispersed in the liquid, such as "pigments," "oil particles," "bacteria," "viruses," "glass," "colloidal silica," "colloidal particles," and "color components," have a negative surface potential in the liquid (which varies with pH). When the above-mentioned microparticles approach the charge-adsorbing fiber "ZetaMax," they are adsorbed to ZetaMax due to the potential difference between positive and negative charges. The charge-adsorbing filtration fiber "ZetaMax" removes microparticles from the liquid not through physical filtration like UF membranes or MF membranes, but through adsorption similar to activated carbon or zeolite. This adsorption utilizing charge efficiently removes viscous substances that are difficult to eliminate using conventional membrane filtration methods, as well as substances ranging from a few nanometers to several hundred nanometers that are hard to adsorb with activated carbon or zeolite. *For more details, please download the PDF or feel free to contact us.*

• filter
• Other filters

This product uses a special membrane with a positively charged tip to adsorb and capture negatively charged impurities on the nanoscale in water. The adsorption due to charge is strong, allowing it to adsorb various negatively charged substances and components. It is capable of removing submicron-level suspended solids and oils, as well as dyes, and even performing nano-level filtration of bacteria, viruses, and proteins. 【Features】 ■ Removal of nanoscale ultrafine particles ■ Reduction of membrane fouling ■ Removal of water-soluble oils ■ Removal of microorganisms *For more details, please refer to the PDF document or feel free to contact us.

• filter
• Other physicochemical equipment

The "TUS Series" is a flow-type ultraviolet sterilization device that balances low cost and high functionality. Ultraviolet sterilization is fundamentally an effective method for disinfecting various types of bacteria. It can effectively sterilize regardless of the type of bacteria. This series offers a wide range of models, from those with a processing capacity of 11L/min to those with a maximum capacity of 2360L/min, allowing you to select the appropriate model based on your usage conditions and applications. 【Features】 ■ A wide lineup from low flow to high flow ■ Durable stainless steel sterilization tube (some models use SUS316L as standard) ■ UV devices for high temperatures are also available ■ Balances low cost and high functionality *For more details, please refer to the PDF materials or feel free to contact us.

• Ultraviolet irradiation equipment
• Sterilizer

This catalog introduces the "Filter Cartridges" handled by Takie Engineering Co., Ltd. It features various products, including the "ULTRA10" filter cartridge, which uses a 0.02μm hollow fiber filter capable of virus-level filtration, as well as the very compact "MIC type" and "high-precision pleated filters." [Featured Products (Excerpt)] ■ Hollow Fiber Filter ULTRA10 ■ Hollow Fiber Filter MICRO10 ■ High-Precision Pleated Type Filter PP Type ■ Sterilizing Activated Carbon Filter DSP Type/DS Type ■ Pleated Type Filter PPA Type *For more details, please refer to the PDF document or feel free to contact us.

• filter
• Other filters

The "MIC type" is a filter cartridge that uses a 0.15μm hollow fiber filter, capable of disinfecting and filtering raw water. It does not contain any chemicals that would leach into the water, and when used at the specified filtration accuracy, it provides a 100% removal effect throughout its service life. It has an absolute filtration accuracy of 0.15μm, with a removal rate of 99.999999% or higher for particles larger than 0.15μm. 【Features】 ■ Removal of ultra-fine particles starting from 0.15μm ■ Disinfection and clarification filtration of various industrial waters ■ Disinfection and clarification filtration of process water *For more details, please refer to the external link or feel free to contact us.

• filter

This product has a high removal rate of fine particles compared to standard filtration filters. Therefore, it can be used in settings that require precise filtration with high accuracy. Additionally, options such as the "hollow fiber filter" with a filtration accuracy at the virus level of 0.02μm, and the "high-precision pleated filter" with a removal rate of 99.98%, can be selected according to filtration accuracy and application. 【Features】 ■ Removal of ultrafine particles at the virus level of 0.02μm and above ■ Sterilization and clarification filtration of various water sources ■ Filters for process water filtration ■ Safety filters *For more details, please refer to the external link or feel free to contact us.

• filter

"ULTRA10" is a filter cartridge that uses a 0.02μm hollow fiber filter, capable of virus-level filtration. It does not contain any chemicals that would leach into water, and when used at the specified filtration accuracy, it provides 100% removal effectiveness throughout its service life. Additionally, it has an absolute filtration accuracy of 0.02μm, with a removal rate of 99.99% or higher for particles larger than 0.02μm. It is compatible with standard housings and is a very compact product. 【Features】 ■ Removal of ultrafine particles starting from 0.02μm ■ Virus-level filtration ■ For ultra-pure water production lines ■ Sterilization and clarification filtration for various water sources *For more details, please refer to the external link or feel free to contact us.

• filter

This product is a filter cartridge that efficiently adsorbs and removes oil components such as gasoline and oil in an emulsion state, which are finely dispersed in liquid. It is possible to remove oil contamination in an emulsion state, which cannot be separated by floating or settling, simply by passing water through the filter. The filter replacement is also easy, as it only requires changing the filter media. 【Features】 ■ Efficiently adsorbs and removes oil components in an emulsion state, such as gasoline and oil ■ Removal is possible simply by passing water through the filter ■ Filter replacement is easy and can be done by just changing the filter media *For more details, please refer to the external link or feel free to contact us.

• Other filters

This is a small, low-cost single-type resin filter housing. It is compact and can accommodate general filtration filters with an outer diameter of around 70mm to 115mm, both domestically and internationally. The main body is made of materials such as polypropylene and AS resin, making it suitable for a wide range of fluid filtration, from coarse filtration filters to precision filtration filters. It has low pressure loss, and the replacement of filter media is easy, with the housing body being attachable with screws. This low-cost filter housing made of resin material allows for cost reduction in filtration equipment components.

• filter
• Piping Materials
• Filtration Equipment

The "STB type/ST type" is a single-type housing. Since the main body material is made of stainless steel, it has excellent corrosion resistance compared to plastic filter housings and can be used with chemical solvents as well. *Please check the corrosion resistance of the material before use if it is to be used with liquids other than water. Additionally, it can be used with high-temperature liquids, with the "STB type" capable of handling liquids up to 120°C and the "ST type" up to 121°C. 【Features】 ■ Main body material is stainless steel ■ Excellent corrosion resistance ■ Usable with chemical solvents and more ■ Using a ball valve allows for easy drainage during cartridge replacement ■ Can accommodate any filter cartridge with an outer diameter of around 70mm *For more details, please refer to the PDF document or feel free to contact us.

• filter
• Piping Materials
• Filtration Equipment

The stainless steel filter housing for high flow rates can accommodate multiple filter cartridges inside, allowing for a greater flow rate compared to single-type filter housings. Additionally, since the main body is made of stainless steel, it has excellent corrosion resistance and can be used for a wide range of applications. The filter cartridges that can be placed inside can be selected according to the filtration purpose, allowing for a wide range of options from coarse filtration cartridges to precision filtration cartridges.

• filter
• Piping Materials
• Filtration Equipment

The "15 Series" features a body made of reinforced polypropylene, making it extremely durable and resistant to scratches, and it is a jumbo-sized filter. Since the body is made of resin, it is suitable for areas where metal housings cannot be used, such as in seawater. Additionally, it can be installed in parallel or series according to the filtration purpose. 【Features】 ■ High flow rate ■ Made of resin ■ Low price ■ Easy maintenance ■ Sturdy resin body *For more details, please refer to the PDF materials or feel free to contact us.

• Water treatment equipment
• Filtration Equipment
• Solid-liquid separation filter

The jumbo-sized filter is a filtration system that uses a stainless steel filter housing "HIFP-F-17 type" and a dedicated filter cartridge "JPEP type." It can handle a large flow rate with low pressure loss compared to conventional filter cartridges. With a processing capacity of 300 to 560 L/min per unit, it can handle a very high flow rate, significantly reducing the number of filter cartridges typically used. Additionally, having fewer cartridges greatly minimizes the hassle of filter replacement. Moreover, jumbo-sized cartridges with a rating of 5μm or higher can be reused several times by washing away coarse debris that adheres to the filter's filtration surface.

• filter
• Filtration Equipment
• Wastewater/wastewater treatment equipment

The "CF type" is a cyclone filter that efficiently removes solid particles of 40μm or larger with a specific gravity of 1.8 or more. There is no clogging like that of a filter cartridge, and there is no need for replacement. It efficiently removes sand, mud, metal chips, and sludge from the raw water. It is suitable for the removal of solid particles of 40μm or larger from well water, river water, and water from factories. 【Features】 ■ Efficiently removes solid particles of 40μm or larger with a specific gravity of 1.8 or more ■ No clogging like that of a filter cartridge, and no need for replacement ■ Efficiently removes sand, mud, metal chips, and sludge from raw water ■ Suitable for the removal of solid particles of 40μm or larger from well water, river water, and water from factories ■ Available in models ranging from small flow rates (18L per minute) to large flow rates (1343L per minute) * Custom products capable of handling a maximum flow rate of 42,400L per minute are also available. * For more details, please refer to the PDF document or feel free to contact us.

• filter
• Filtration Equipment

This catalog features a wide range of products handled by Takie Engineering Co., Ltd. Our company is continuously adding new products, such as nanoparticle capture filters using special membranes with new technologies, to our product lineup to address our customers' challenges and requests. From our extensive product lineup, we will propose products that can help solve your problems and challenges in the appropriate "material" and suitable locations. [Featured Products (Excerpt)] ■ Zeta Potential Adsorbent ZETAMAX ■ Commercial Flow-Type Ultraviolet Sterilization Device ■ Nanoparticle Capture Filter Cartridge ■ Nanoparticle Filtration Membrane Set ■ Reverse Osmosis Water Purification Device, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Pure water production equipment
• Water treatment equipment
• Other water treatment equipment

This is a filter cartridge for removing impurities (solid substances) such as sand, mud, sludge, and debris from low-cost liquids. It handles commonly used filter types such as wound type filters, melt-blown type filters, and pleated type filters that increase the filtration surface area and reduce pressure loss.

• filter
• Solid-liquid separation filter
• Other filters

This product is a filter cartridge designed to remove impurities such as sand, mud, and sludge from high-temperature liquids. It is designed to be used with high-temperature liquids by utilizing materials such as SUS304 and nylon in its filter components. The filtration accuracy ranges from 0.5μm to 200μm, allowing you to select according to the amount, type, and application of impurities. 【Features】 ■ Removes impurities such as sand, mud, and sludge from high-temperature liquids ■ Uses materials like SUS304 and nylon in the filter components ■ Usable with high-temperature liquids ■ Filtration accuracy available from 0.5μm to 200μm *For more details, please refer to the external link or feel free to contact us.

• filter

We offer a wide range of activated carbon filters, from low-cost filters primarily aimed at removing chlorine from tap water to high-precision activated carbon filters capable of removing pesticides and VOCs (volatile organic compounds) such as trihalomethanes and lindane.

• filter

This product is a system that can extract highly pure water by removing substances other than raw water or water itself and eliminating impurities in the water at a high level. Our product achieves low-cost ultra-pure water/pure water production by combining it with our existing equipment or by reviewing the materials used. It is possible to easily, conveniently, and at low cost produce and supply ultra-pure water/pure water from tap water. 【Features】 ■ Removes substances other than raw water or water itself ■ Capable of extracting highly pure water with impurities in the water removed at a high level ■ Can easily, conveniently, and at low cost produce and supply ultra-pure water/pure water from tap water *For more details, please refer to the external link or feel free to contact us.

• Pure water production equipment

The TUS-C type is a compact ultraviolet sterilization device designed for low flow rates. Its simple design, which focuses on essential functions, makes it a cost-effective series at a low price. Additionally, the main sterilization tube has a single open structure, allowing for the replacement of the UV lamp without the need to drain the interior.

• Ultraviolet irradiation equipment
• Water treatment equipment
• Other water treatment equipment

The TUS-LA model is a UV sterilization device equipped with the latest electronic stabilizer featuring an LCD, capable of handling up to 79L/min. As options, we offer features that were not available in UV sterilization devices of this size, such as a UV intensity sensor, a 4-20mA module, and a remote alarm module. You can combine a variety of upgrade options to suit your usage conditions.

• Ultraviolet irradiation equipment
• Water treatment equipment
• Other water treatment equipment

The "TUS-LB Series" is a UV sterilization device with a standard body sterilization tube made of SUS316L material. It supports a small flow rate of 15L/min to a large flow rate of 151L/min. Using an electronic stabilizer equipped with an LCD, it allows for additional functions with a variety of options such as UV intensity sensors and remote alarm modules. Additionally, the specially designed UV lamp maintains high output while extending its lifespan to 10,000 hours, which is 1,000 hours longer than conventional products, continuously irradiating UV light to sterilize bacteria in water. 【Features】 ■ Clean sterilization using UV light ■ Standard body sterilization tube made of SUS316L ■ Display via LCD ■ High output and high-performance UV lamp ■ Supports small to medium flow rates *For more details, please refer to the PDF document or feel free to contact us.

• Other water treatment equipment

The "TUS-D type" is a commercial flow-type ultraviolet sterilization device made of stainless steel. It can be used with a DC power supply equipped with an LCD. Additionally, since it operates on DC power, there is no need to convert to AC100V when integrated into equipment, allowing it to be used directly with the DC power supply within the device. 【Features】 ■ Clean ultraviolet sterilization that does not alter the target liquid ■ Easy integration into equipment due to operation on DC power ■ Clear and easy-to-understand display with LCD ■ Lamp replacement is simple and safe, requiring only the unplugging of the connector ■ Excellent cost performance at a low price *For more details, please refer to the external link or feel free to contact us.

• Water treatment equipment
• Other water treatment equipment

We would like to introduce the "Nanoparticle Filtration Membrane Set" handled by Taki Engineering Co., Ltd. This product has a positively charged surface due to special processing, allowing it to remove negatively charged fine particles dispersed in water. The pore size of the filtration membrane is 1 to 3 μm, but due to the effect of surface charge, it efficiently adsorbs particles ranging from a few to several hundred nm dispersed in water. 【Examples of Use】 ■ Laboratories and Research Facilities - Removal of viruses, bacteria, and oil from water ■ Pre-treatment for virus removal membranes and expensive high-precision filtration membranes - Can be used as a pre-treatment filter due to its low cost ■ Used as pre-treatment for RO membranes and NF membranes - Can adsorb organic matter in water, making it useful for membrane fouling prevention ■ Filtration of various negatively charged objects at the nanoscale, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Other laboratory equipment and containers
• filter