ハビリス List of Products and Services

We would like to introduce a case where our "Wave Researcher" was delivered to a continuous casting equipment rolling roll current monitoring system. This case aims to measure the currents and torques of multiple drive motors of the rolling rolls in the continuous casting process, detect abnormalities in the motors, and prevent impacts on products and operations due to misrolls. It records data to early detect the risks of rolling defects or equipment shutdowns caused by motor or roll drive mechanism failures or insufficient lubrication. 【Features】 ■ Measures the currents and torques of multiple drive motors of the rolling rolls in the continuous casting process of steel mills. ■ Detects motor abnormalities through relative diagnosis of load currents between adjacent drive motors. ■ Prevents impacts on products and operations due to misrolls. ■ Early detection of risks of rolling defects or equipment shutdowns caused by motor or roll drive mechanism failures or insufficient lubrication. ■ Records data to establish appropriate countermeasures. *For more details, please refer to the PDF document or feel free to contact us.

• Other information systems

We would like to introduce a case where our "Wave Researcher" was delivered to a continuous casting equipment mold molten metal level monitoring system. This case is used for monitoring the molten metal level within the mold (formwork) of the continuous casting process, aimed at improving the quality of steel products and preventing operational troubles. It measures data such as the molten metal level within the mold, the vibration condition of the mold, casting length, and weight in as little as 10 ms, enabling monitoring of product quality and data analysis. 【Features】 - Aimed at improving the quality of steel product production and preventing operational troubles - Used for monitoring the molten metal level within the mold (formwork) of the continuous casting process - Measures data such as the molten metal level within the mold, the vibration condition of the mold, casting length, and weight in as little as 10 ms - Conducts monitoring of product quality and data analysis *For more details, please refer to the PDF document or feel free to contact us.

• Other information systems

We would like to introduce a case where our "Wave Researcher" was delivered to a continuous casting equipment mold vibration monitoring system. The purpose is to monitor the continuous casting equipment using the continuous casting method, where molten steel is injected from the converter into the mold (formwork) and continuously drawn out from the other side into a water-cooled casting mold. Data from various sensors installed in the casting equipment is measured in real-time, providing information that helps ensure quality and analyze casting results. 【Features】 ■ Aimed at improving quality during steel product production ■ Used for monitoring the behavior of the mold (formwork) in the continuous casting process ■ Measures data such as the level of molten steel within the mold, vibration conditions of the mold, casting length, and weight in as little as 10ms ■ Conducts monitoring and analysis of product quality *For more details, please refer to the PDF document or feel free to contact us.

• Other information systems

We would like to introduce a case where our "Wave Researcher" was delivered to an electric product vibration inspection system. The system measures whether phenomena occur that could lead to the destruction of product components or materials, or the loosening of screws, resulting in noise, by varying the range of resonance frequencies of vibrations that the product is likely to encounter during use. This system was developed for vibration testing of in-vehicle home appliances such as car navigation systems and audio equipment, and it performs pass/fail judgments based on pre-specified criteria. 【Features】 - Developed for vibration testing of in-vehicle home appliances such as car navigation systems and audio equipment - Vibration waveforms controlling the exciter are registered in advance in a file - Vibration and acoustic data generated from the product are measured using an analog input module - Pass/fail judgments are made based on pre-specified criteria *For more details, please refer to the PDF document or feel free to contact us.

• Other information systems

We would like to introduce a case where our "Wave Researcher" was delivered for a medium motor durability testing software. This case involves a system created for the lifespan testing of medium motors, which are widely used in production equipment within factories and play a significant role in various industries. The lifespan tests are conducted by installing multiple industrial motors, which vary in type based on their intended use and capacity, within the factory and controlling different conditions individually from a sequencer. 【Case Overview】 ■ Measurement Equipment - Yokogawa Electric Corporation: MX100 Data Acquisition System ■ Control Device - Yokogawa Electric Corporation: FA-M3 Sequencer *For more details, please refer to the PDF document or feel free to contact us.

• Other information systems

We would like to introduce a case where our "Wave Researcher" was delivered as a vibration monitoring system for large ship reduction gears. This case involves a device located between the large engine of the ship and the propulsion mechanism (propeller), which reduces the rotational speed to obtain torque proportional to the reduction ratio. It continuously monitors the vibration (displacement) of the reduction gear, an essential piece of equipment for navigation, helping in the early detection of abnormalities and predictive maintenance. 【Features】 - A device located between the large engine and the propulsion mechanism (propeller) that reduces rotational speed to obtain torque proportional to the reduction ratio. - Continuous monitoring of the vibration (displacement) of the reduction gear, which is critical for navigation. - Assists in the early detection of equipment abnormalities and predictive maintenance. - Measures vibration (displacement) data from the rotation axis of the reduction gear. *For more details, please refer to the PDF document or feel free to contact us.

• Other information systems

We would like to introduce a case where our "Wave Researcher" was delivered to a solar power grid-connected inverter testing system. The testing of solar power grid-connected inverter devices is generally conducted in accordance with the method outlined in the "Testing Methods for Grid-Connected Protection Devices for Small Solar Power Generation Systems." In this case, we used power meters "WT230" and "WT1600," along with "DL750" for waveform analysis, and a simulated power supply to measure and analyze test data. 【Processing Details】 ■ Control a power supply that simulates solar panels to input DC voltage into the inverter device being tested. ■ Measure the AC output from the inverter, as well as the voltage, current values, frequency, and harmonics of the grid-simulated power supply using power meters. ■ Observe the operational status of the inverter's protection functions and the waveforms of the inverter output voltage and current. ■ Prepare a test report based on the test results. *For more details, please refer to the PDF document or feel free to contact us.

• Other information systems

We would like to introduce a case where our "Wave Researcher" was delivered to an office equipment energy-saving, ozone and VOC measurement system. In the case of copiers and laser printers, VOCs and ozone are emitted from components such as silicone resin in areas where high heat is generated, like the heat fixation unit and scanner unit. This case involves measuring the substances emitted from such office equipment and their power consumption, conducting analyses for product quality improvement and performance enhancement to achieve energy-saving standards. 【Features】 - Aimed at quality assurance and collection of performance test data for copiers and laser printers. - Conducts measurements related to energy saving and measures environmental burden substances such as ozone and VOCs (volatile organic compounds). *For more details, please refer to the PDF materials or feel free to contact us.

• Other information systems

We would like to introduce a case where our "Wave Researcher" was delivered to a commercial CO2 heat pump testing system. For data collection, we added the collection of power-related data using the "WT500" power meter to the basic functions. The main modifications include altering the parts responsible for calculations and screen displays, such as refrigerant capacity calculations, power consumption, and performance coefficient (COP) calculations, as well as adding the functionality to create test reports using EXCEL. 【Case Overview】 ■ Additions and Modifications - Added power-related data collection using the "WT500" power meter to the basic functions of the "Wave Researcher" - Modified the parts responsible for calculations and screen displays, such as refrigerant capacity calculations, power consumption, and performance coefficient (COP) calculations - Added functionality to create test reports using EXCEL *For more details, please refer to the PDF document or feel free to contact us.

• Other information systems

We would like to introduce a case where our "Wave Researcher" was delivered as a monitoring system for recording ship motion characteristic data. This system measures and records data related to the engine and steering systems of the ship in real-time during navigation, collecting various types of analog and digital data. Normal operations can be easily performed using button controls on a touch panel, making it easy to operate even in a ship that is experiencing heavy rolling. 【Features】 ■ Real-time measurement and recording of data related to the engine and steering systems of the ship during navigation ■ Collection of various types of analog and digital data ■ Normal operations can be easily performed using button controls on a touch panel ■ Easy to operate even in a ship that is experiencing heavy rolling *For more details, please refer to the PDF document or feel free to contact us.

• Other information systems

We would like to introduce a case where our "Wave Researcher" was delivered to a thermal power plant's fuel facility temperature monitoring system. By monitoring data from numerous temperature sensors, we ensure the fluidity of fuel in fuel tanks and complex fuel piping systems while effectively utilizing steam. Additionally, we have set up four levels of temperature alarm settings for the many temperature sensors installed in the fuel tanks and fuel piping systems, allowing for constant monitoring. 【Features】 ■ Temperature monitoring of the fuel system from the fuel tank to the boiler ■ Real-time collection of data from numerous installed temperature sensors ■ Ensuring fuel fluidity and effective utilization of steam *For more details, please refer to the PDF document or feel free to contact us.

• Other information systems

We would like to introduce a case where our "Wave Researcher" was delivered to a thermal power plant's coal storage temperature monitoring system. Due to the presence of multiple coal storage locations, we grouped the storage locations and modified the system to allow for four levels of temperature alarm settings. The alarms are managed by the MX100, which uses an externally connected patrol light as the alarm lamp, and we added a function to automatically print temperature monitoring reports (daily and monthly). 【Features】 ■ Group registration of coal storage locations ■ Modification to allow for four levels of temperature alarm settings ■ Alarms managed by MX100 ■ Use of an externally connected patrol light as the alarm lamp ■ Added function to automatically print temperature monitoring reports ■ Modification to allow registration of coal brands and other details *For more details, please refer to the PDF document or feel free to contact us.

• Other information systems

We would like to introduce a case where our "Wave Researcher" was delivered to a film manufacturing factory's wastewater monitoring system. It continuously measures data such as the operational status of each treatment device and pump, the status of chemical dosing, pH, COD levels, the water level in adjustment tanks, flow rate, and discharge volume. It monitors whether the wastewater discharged outside the factory meets the discharge standards while the factory is in operation. 【Processing Details】 ■ Additional Features: Methods for alarm determination, determination criteria, alarm notifications, automatic output functions for daily and monthly reports ■ Basic Features: Real-time screen display *For more details, please refer to the PDF document or feel free to contact us.

• Other information systems

We would like to introduce a case where our "Wave Researcher" was delivered as a backup battery charge and discharge testing system. While controlling the charge and discharge testing equipment that can manage test conditions such as constant current and constant voltage modes, we measure and record data related to the battery's charge and discharge status and battery temperature in real-time. The automation of tests that are conducted repeatedly over long periods has contributed to improved work efficiency. 【Case Overview】 ■ Measuring Equipment ・Data Acquisition System MX100 ・Windows Computer *For more details, please refer to the PDF document or feel free to contact us.

• Other information systems

We would like to introduce a case where our "Wave Researcher" was delivered to a solar cooling equipment capacity testing system. It was used for efficiency measurement in a case where hot water obtained from solar thermal collectors installed on the rooftop of a building is combined with city gas for heating and cooling the building. Real-time measurement of temperature and flow data from solar thermal collectors, absorption chillers, thermal storage tanks, etc., is conducted to analyze the system's performance. [Case Overview] ■ Processing Details - Basic Functions: Measurement of data related to the system, such as temperature and flow, and real-time and post-processing screens. - Calculation Functions: Capacity calculations for solar thermal collectors, heat exchangers, cooling capacity, and heating/cooling COP (Coefficient of Performance). *For more details, please refer to the PDF materials or feel free to contact us.

• Other information systems

We would like to introduce a case where our "Wave Researcher" was delivered to a car air conditioning bench control monitoring system. It registers driving patterns that simulate actual vehicle driving patterns and controls the operation of components such as the compressor and fan accordingly. The control interval with this software is as short as 50ms, and it allows for the registration of conditions such as 10 and 15 modes for driving patterns, enabling continuous control for up to 5.5 hours per test. [Case Overview] ■ Control Equipment: PC-based Measuring Instrument WE7000 ■ Measurement Equipment: Data Acquisition System MX100 *For more details, please refer to the PDF document or feel free to contact us.

• Other information systems

We would like to introduce a case where our "Wave Researcher" was delivered to an engine bench exhaust gas testing system. We have built the system using multiple SCADA software, but the configuration and operation methods vary significantly depending on the software used, which has posed major obstacles to the efficiency of testing and personnel planning. To resolve this situation, the system was constructed, achieving significant results in improving testing efficiency. [Case Overview] ■ Issues - The configuration and operation methods vary greatly depending on the software used, causing major obstacles to testing efficiency and personnel planning. ■ Results - Achieved significant results in improving testing efficiency. *For more details, please refer to the PDF document or feel free to contact us.

• Other information systems

We would like to introduce a case where our "Wave Researcher" was delivered to an EcoCute hot water supply control performance testing system. The performance tests were conducted by controlling the temperature in the environmental testing chamber using a regulator, while changing the environment in which the EcoCute was used. By programmatically controlling the UT series regulator, we were able to vary the temperature, humidity, and other conditions in the environmental testing chamber according to seasonal conditions, allowing for external environment simulation and testing that mimics real-world conditions. 【Features】 ■ For the development and verification testing of EcoCute products ■ Changes the environment in which the EcoCute is used by controlling the temperature in the environmental testing chamber with a regulator *For more details, please refer to the PDF materials or feel free to contact us.

• Other information systems

We will introduce a case study of a system that measures the numerous behavioral data such as distortion and pressure that occur in the gun barrel when a projectile is fired, using a high-speed data logger equipped with internal memory capable of sampling up to 1 MHz, and conducts the collection and analysis of behavioral data. 【Case Overview】 ■ Measurement of data related to the behavior of the gun barrel at the time of projectile launch, using pressure, acceleration, displacement, temperature, etc. ■ Measurement of data regarding the operation of a cushioning device that operates according to the behavior of the gun barrel, using pressure, displacement, and acceleration. *For more details, please refer to the PDF document or feel free to contact us.

• Other information systems

For the development of vacuum deposition technology, data related to vacuum deposition equipment is being used for monitoring purposes. We introduce a system delivery case that measures data such as temperature, vacuum level, pressure, heater voltage, and current using the "Wave Researcher" and Yokogawa Electric Corporation's data acquisition system "MX Series," with measurements taken as quickly as every 100 ms, allowing for the monitoring of equipment operation and data analysis. The operational status of the vacuum deposition equipment is measured with the "MX Series," and conditions for improving deposition speed and achieving uniform film thickness are being investigated. [Case Overview] - Measurement of data such as temperature, vacuum level, pressure, heater voltage, and current in as little as 100 ms - Monitoring of equipment operation and data analysis *For more details, please refer to the PDF document or feel free to contact us.

• Other information systems

We will introduce a case study of a system that monitors the operating status of the "Wave Researcher" and the electro-polishing device using the "MX Series," closely observing the voltage and current conditions in the electrolyte. This system is used for monitoring device-related data for the supervision of the electro-polishing device and technology development, measuring various applied voltages and currents in as little as 100 ms, and conducting operational monitoring and data analysis of the device. 【Case Overview】 - Measurement of various applied voltages and currents in as little as 100 ms - Operational monitoring and data analysis of the device *For more details, please refer to the PDF document or feel free to contact us.

• Other information systems

We would like to introduce a case study of a system for measuring and reporting environmental radiation levels associated with the operation of various cyclotron facilities for testing. Regarding environmental radiation, the Nuclear Safety Commission has compiled the "Environmental Radiation Monitoring Guidelines" to improve and standardize the technical level of monitoring, providing basic methods for conducting monitoring and dose assessment. 【Case Overview】 ■Challenges - Implementation of monitoring and dose assessment ■Results - Continuous monitoring on a computer screen - Alarm values set for each measurement point, with alarms triggered and processed when exceeding upper limits - Automatic aggregation of various measurement data, with daily and monthly reports generated automatically *For more details, please refer to the PDF document or feel free to contact us.

• Other information systems

This system is used to continuously monitor numerous temperatures of the various devices that make up the hot air furnace at 5-second intervals. It employs the "Wave Researcher," which has been enhanced with features on two network computers, and Yokogawa Electric Corporation's data acquisition system "MX100." The system calculates the rate of temperature change of the temperature data from different parts of the hot air furnace in real-time and conducts anomaly prediction analysis to detect signs of potential issues. It measures and monitors numerous temperature data in real-time from the "MX100," which cannot be captured by the operational control system, while also calculating the temperature changes of each part in real-time for up to 10 days. This information is useful for analyzing signs of abnormal conditions that could lead to a halt in blast furnace operations. [Case Overview] ■ Challenges - To monitor without affecting operations ■ Results - Real-time measurement and monitoring - Sending alarm contacts to the operational control system *For more details, please refer to the PDF document or feel free to contact us.

• Other information systems

We have modified the "Wave Researcher" for use in a car air conditioning test bench and would like to introduce a case study of the system's delivery. There are many types of air conditioners for automobiles, and the environmental testing rooms installed in factories and research laboratories vary widely, as do the measurement and control equipment and the manufacturers that produce them. The differences in operability have become a cause that hinders the efficient operation of the equipment. This case aims to achieve efficient operation of the facilities by standardizing test systems from different manufacturers. Based on the "Wave Researcher," it has become possible to handle equipment from multiple manufacturers. [Case Overview] ■Challenges - Standardization of test systems - Efficient operation of facilities ■Results - Enabled processing compatible with equipment from multiple manufacturers *For more details, please refer to the PDF document or feel free to contact us.

• Other information systems

We will introduce a case study of a system that analyzes noise data using FFT, evaluates it with POA (equivalent noise level), and automatically sends an email alert when it exceeds pre-defined alarm criteria. Traditionally, environmental standards related to noise were evaluated based on the median noise level, but as of the "Ministry of the Environment Notification No. 64" in 1998, they are now evaluated using the equivalent noise level. *For more details, please refer to the PDF document or feel free to contact us.

• Other information systems

We would like to introduce a case study of a system that adds many functions to the measurement and analysis capabilities based on the "Wave Researcher" for the development of new refrigerator products and quality assurance evaluations. Since the tests require long-term data measurement, an efficient system is highly desired. The "Wave Researcher" operates on a single measurement server, allowing for centralized monitoring of up to 10 tests in the environmental testing room, demonstrating significant effectiveness in simplifying operations, reducing the number of measurement computers, and centralizing management of measurement data. 【Case Overview】 ■Challenges - Demand for an efficient system ■Results - Significant effectiveness in simplifying operations, reducing the number of measurement computers, and centralizing management of measurement data. *For more details, please refer to the PDF document or feel free to contact us.

• Other information systems

We would like to introduce a case study of a system that adds many measurement and analysis functions based on the "Wave Researcher" for environmental monitoring for quality assurance of pharmaceutical research facilities. Temperature, humidity, and differential pressure are measured by DARWIN, while the particulate matter in each testing room has an RS485 interface, and data collection is conducted via dedicated measurement software. The data is integrated and modified for real-time monitoring using the "Wave Researcher," and by utilizing the network-compatible version of the "Wave Researcher," monitoring can also be performed from client PCs. 【Case Overview】 ■Challenges - Real-time monitoring ■Results - Modified for real-time monitoring - Enabled monitoring from client PCs *For more details, please refer to the PDF document or feel free to contact us.

• Other information systems

We will introduce a case study of a system that conducts mechanical tests for quality assurance and PTC10 performance tests as specified by ASEM for large compressors and steam turbines used in petrochemical and energy-related applications. We pre-register a complex combination of compressors and turbines in a patterned manner, and register numerous measurement channels such as temperature, pressure, flow rate, and power as test conditions required for the tests. The creation of various test reports related to mechanical testing can include vibration-related reports such as polar, tracking, modal, and shaft centerline graphs, as well as lists of vibration and phase values for specified rotational speeds. 【Case Overview】 - Mechanical Testing - Performance Testing *For more details, please refer to the PDF document or feel free to contact us.

• Other information systems

We would like to introduce a case study of a system that collects and analyzes various data such as vibration, pressure, and temperature in real-time, which is essential for maintaining quality during the manufacturing of large compressors used in shale oil, petrochemicals, and energy-related development. In conventional systems, measurement data such as temperature, pressure, and flow rate were collected and analyzed separately from vibration-related data. Our new system allows for efficient processing of this data, significantly improving work efficiency. 【Case Overview】 ■Challenges - Measurement data and vibration-related data were collected and analyzed using separate systems. ■Results - The new system enables efficient processing, leading to a significant improvement in work efficiency. *For more details, please refer to the PDF document or feel free to contact us.

• Other information systems

The customer has been using the "Wave Researcher" and Yokogawa Electric Corporation's recorder for some time, and with the recent expansion of their facilities, they have introduced multiple units of the MX100 and "Wave Researcher." This system collects various data in real-time for performance and durability tests of large diesel engines and gas engines for ships, which have completed assembly, using the Yokogawa Electric Corporation MX100 and "Wave Researcher," enabling comprehensive performance evaluations over extended periods. [Case Overview] ■ Challenges - Facility expansion ■ Results - Collection and processing of ship engine test data *For more details, please refer to the PDF document or feel free to contact us.

• Other information systems

The "Wave Researcher 8423 Version 4" connects the Hioki Electric Memory HiLogger 8423, known for its rich track record and high speed, to a computer via Ethernet, demonstrating significant effectiveness in understanding various phenomena in manufacturing processes and other areas where high-speed, multi-channel capabilities are desired. It allows continuous measurement at the fastest rate of 10ms and up to 600 channels, making it useful for equipment monitoring and research and development. The software is equipped with various editing functions, allowing users to retrieve collected data and display it again in time-series graph format, among other features. 【Features】 ■ High expandability with up to 600 points ■ Continuous measurement at the shortest interval of 10ms ■ Easy operation that anyone can use ■ Flexible testing capabilities ■ Inter-channel calculations possible during data collection *For more details, please refer to the PDF materials or feel free to contact us.

• Other information systems

"Wave Researcher/MELSEC-Q Sequencer Compatible" monitors and records continuous register data from the MELSEC sequencer used in manufacturing process control in as little as 100ms. The screen display function is common with the "Wave Researcher" series, which is loved by many customers. To use it, only a computer and this software are required. Therefore, there is no need for the cost of installing a new data logger or wiring work. 【Features】 ■ No need to install a data logger ■ Can be implemented at minimal cost ■ Data can be read in as little as 100ms ■ Easily create any number of screens ■ Alarm display and alarm history display available ■ Collected data can be re-displayed in graphs using viewer software ■ Collected data can be converted to CSV format files for EXCEL *For more details, please refer to the PDF materials or feel free to contact us.

• Other information systems

The "Rotational Vibration Simulation Device: H02" is a small rotor model that reproduces the rotational vibration phenomena of rotating machinery. By attaching a vibration sensor to the bearing and preparing a non-contact rotational sensor on the rotating shaft connected to the measuring equipment, it is possible to easily simulate the field environment. For data collection and analysis for rotational vibration analysis, please use our "RotaryView" portable system for rotational vibration analysis. Real-time rotational vibration/phase analysis can be performed using polar diagrams, etc. 【Features】 ■ Easy operation ■ Change the rotational speed by turning the rotary dial ■ 4-digit display of rotational speed * For more details, please refer to the PDF document or feel free to contact us.

• Other information systems

The "UJ-1" is a compact onboard deceleration meter that uses a multifunctional information terminal. It can display deceleration/acceleration modes and has improved responsiveness compared to U-tube deceleration meters. When used with the separately sold TEAC recording unit "LX series," a computer, and our "SpectraView" real-time data recording and FFT analysis software during actual vehicle testing, it is highly effective. 【Features】 ■ Faster response than U-tube types ■ Can also be used as an accelerometer ■ Capable of displaying deceleration and acceleration modes ■ Background flashes to notify when the acceleration/deceleration enters the target value ■ Easy operation *For more details, please refer to the PDF materials or feel free to contact us.

• Other information systems

"RotaryView" is a compact rotational vibration analysis system that is useful for balancing large rotating machinery and conducting field tests. It consists of TEAC's front-end "LX-1000," our developed rotational vibration analysis software, sensor amplifiers, and a computer. It collects rotational pulses and vibration data from up to 16 points in real-time, performs FFT analysis and phase calculations, allowing for the detection of shaft misalignment, which is beneficial for balancing adjustments and field tests after overhauls. 【Features】 ■ Capable of collecting rotational pulses and vibration data from up to 16 points in real-time ■ Measurements that were previously conducted for each bearing using a portable balancer can now be done in one go ■ Convenient for on-site measurements *For more details, please refer to the PDF materials or feel free to contact us.

• Other information systems

"SpectraView V2-NI/cDAQ" is software that connects the data logger "cDAQ series" manufactured by National Instruments Japan to a computer, allowing for real-time FFT analysis while collecting high-speed vibration waveform data and more. It is the NI product version of the "Spectra View" series, which is loved by many customers. Its compact design makes it useful for equipment maintenance tasks and on-site testing, enabling the recording and analysis of various data. 【Features】 ■ Easy high-speed data recording and analysis ■ Capable of capturing vibration waveforms at high speed ■ Simple data measurement ■ Significant efficiency improvements in work ■ Suitable for collecting test data across a wide range of fields *For more details, please refer to the PDF materials or feel free to contact us.

• Other information systems

"SpectraView V2-NI" is a compact version of the data recording and FFT analysis software that is used by many customers. By connecting the data logger "NI USB-9234" manufactured by National Instruments Japan to a computer via USB, it is possible to collect high-speed vibration waveform data while performing real-time FFT analysis. Its very compact size makes it useful for equipment maintenance tasks and on-site testing, and it can be utilized for recording and analyzing various types of data. [Features] - Easy high-speed data recording and analysis - Capable of capturing vibration waveforms at high speed - Suitable for collecting test data across a wide range of fields - Real-time display supports 4 channels - Various editing processes are possible *For more details, please refer to the PDF document or feel free to contact us.

• Other information systems

"SpectraView V2" is a rotational vibration software that is useful for testing, maintenance work, and field testing of rotating equipment such as engines, motors, and compressors. It allows for the retrieval of rotational vibration data recorded with TEAC's recording unit "LX/WX series" and enables constant ratio tracking analysis through constant-width tracking and software resampling. This software for rotational vibration data analysis is widely adopted in the automotive, heavy electrical, home appliance industries, and research institutions. 【Features】 ■ Capable of constant ratio tracking/constant width tracking analysis ■ Capable of vibration analysis of rotating machinery ■ Capable of constant width tracking analysis ■ Can display tracking 3D graphs ■ Screen display can show up to 32 channels *For more details, please refer to the PDF materials or feel free to contact us.

• Other information systems

"Spectra View・V2" is software that connects TEAC's wideband data recorder "WX series," which supports multi-channel, high-bandwidth data recording, to a computer via Ethernet, allowing for real-time FFT analysis while collecting vibration and acoustic data. It can be utilized for recording and analyzing various data useful for the development of new products, equipment maintenance tasks, and field tests. This real-time measurement and FFT analysis software is adopted in the automotive, heavy electrical, home appliance industries, and research laboratories. 【Features】 - Real-time collection and FFT analysis of up to 128 channels of vibration and acoustic data - Expandable from 8/16 channels to a maximum of 128 channels built into the main unit - Simultaneous measurement of a large number of data points - Significant efficiency improvements in work processes - Capable of collecting suitable test data across a wide range of fields *For more details, please refer to the PDF document or feel free to contact us.

• Other information systems

"Spectra View" is a user-friendly software that connects the Integrated Logger LX-1000 and Wideband Recorder WX-7000 series to a computer via Gigabit Ethernet, allowing for the collection of vibration and acoustic data, as well as real-time FFT analysis. Using various input amplifiers (DC, IEPE, strain), it is possible to easily measure data from up to 64 channels (or up to 256 channels synchronized with 4 units as an option) in the DC to 40kHz range. Additionally, by using IEPE input amplifiers, you can directly connect acceleration transducers and more. Furthermore, with customization, you can easily achieve your own analysis evaluations. 【Product Lineup】 ■Spectra View/V2 ■Spectra View WX (for WX-7000) ■Spectra View LX (for LX-1000) *For more details, please refer to the PDF document or feel free to contact us.

• Other information systems

"Wave Researcher / Compatible with Yokogawa Electric FAM3 Sequencer" is a cost-effective, high-performance data monitoring and recording software that utilizes data already incorporated into existing sequencers. It monitors and records continuous register data from the internal Yokogawa Electric FAM3 sequencer used in manufacturing process control in as little as 100 ms. To use this product, only a computer and the software are required. Therefore, there is no need for the cost of installing a new data logger or wiring work. 【Features】 ■ No need to install a new data logger ■ Data monitoring and recording can be done simply by registering channel names and display screens ■ No need for new sensor wiring, allowing for implementation at minimal cost ■ Alarm display and alarm history can also be shown ■ The viewer software allows for graph re-display and conversion to CSV format files for EXCEL *For more details, please refer to the PDF document or feel free to contact us.

• Other information systems

Our company handles "WAVE RESEARCHER/Sterilization Validation Version Ver4." It supports F0 calculations for steam sterilizers and FH calculations for dry heat sterilizers, with validation temperature measurements using thermocouples and resistance temperature detectors. It can measure sterilization effectiveness in steam and dry heat sterilizers in real-time. 【Features】 ■ Real-time display of F0 values for steam sterilization and FH values for dry heat sterilization in time-series graphs ■ Expandability for up to 100 points ■ Measurement intervals as short as 1 second ■ Easy operation that anyone can use ■ Multiple specifications and storage options for measurement conditions, including the number and type of temperature sensors and display screens ■ Usable with multiple sterilizers from a single computer *For more details, please refer to the PDF document or feel free to contact us.

• Other information systems

We handle the "WAVE RESEARCHER V4 LR/Yokogawa Electric Pen Recorder Edition." It supports real-time data collection from the High-Speed Multi-Pen Recorder LR series and data reading from IC memory cards. The LR series, which can continuously record at intervals as short as 100 ms when combined with a computer, is a bestselling pen recorder adopted across a wide range of industries, from basic research to operational recording of testing equipment. 【Features】 ■ Real-time data collection is possible ■ For GPIB, data collection is possible at the shortest interval of 100 msec ■ Rich display options including trend graphs, XY graphs, and digital values ■ Continuous collection based on specified time, and repeated measurements during a specific time period are possible ■ Saved data can easily be re-displayed as graphs or read with a cursor ■ Alarm monitoring is possible with pre-specified upper and lower limit alarm values *For more details, please refer to the PDF materials or feel free to contact us.

• Other information systems

Our company handles the "Remote Setting Tool Ver.2." It allows for easy execution of memory start, memory stop, alarm settings, message registration, and more for Yokogawa Electric Corporation's data collection pharmaceutical models DX100P, DX200P (DXP), DXAdvancedR4 (DXA) with enhanced security features, and SMARTDAC+ (GX/GP/GM) from a computer connected to the network. 【Features】 ■ Remote execution of memory start and memory stop for DXP/DXA/GX/GP/GM ■ Instant reception, modification, and transmission of alarm setting information ■ Alarm transmission possible for DXA/GX/GP/GM without memory stop ■ Capability to write messages and batch information ■ Password change is possible ■ Snapshot display and automatic screen refresh at regular intervals are also possible. *For more details, please refer to the PDF materials or feel free to contact us.

• Other information systems

We handle the "WaveResearcher/Yokogawa Electric's 'DX Series' compatible version." Up to 20 Daqstations can be connected via Ethernet, allowing for easy real-time data collection and monitoring. It contributes to the further effective use of Daqstation, which is widely used for monitoring manufacturing processes of various products, reliability testing data, energy-saving measurements, and the development and testing of new energy products. 【Features】 ■ Real-time data collection and monitoring possible ■ Contributes to the further effective use of Daqstation ■ Range settings and scaling specifications for the DX series are also possible ■ Measurement device settings and measurements can be performed with this software alone ■ Up to 20 DX series devices can be connected, with a maximum of 960 points *For more details, please refer to the PDF materials or feel free to contact us.

• Other information systems