フエスト List of Products and Services

Adopting a new type of profile tube, compatible with a maximum stroke length of 8500mm. 1) Equipped with a cage-type roller guide in the table for all sizes. 2) A variety of options including standard tables, long tables, tables with built-in dust wipers, long tables with built-in dust wipers, and additional tables. 3) The ability to specify a reserve stroke, protecting the actuator from issues such as overruns. 4) Compatible with motors and reducers from various manufacturers both domestically and internationally → Comprehensive support from selection to delivery according to customer specifications. 5) Features a belt holder within the table, significantly improving the efficiency of belt replacement and tension adjustment tasks.

• shaft
• Actuator
• Other FA equipment

- All cylinder surface components and mounting brackets are made of stainless steel. - The piston rod is made of SUS316Ti, which has high corrosion resistance. - The rod packing is made of FDA-approved Media (water-resistant polyurethane). - The grease is USDA-approved H1 (food-grade) grease. - A wide range of stainless steel mounting brackets: flanges, foot mounts, reamer bolts, clevis feet. - Stainless steel load mounting brackets: double-tapered knuckles and rod eyes.

• cylinder
• Pneumatic Equipment

- We will install and assemble the valves according to the customer's specifications and deliver them after conducting functional tests. This can reduce the installation effort and time. - The air supply connection port and air exhaust connection port of the valve terminal are common. The multi-connector cable for electrical wiring is connected to the end plate. - The basic number of valves to be installed in the CDVI is 4 or 8. Expansion allows for a maximum of 2+2 valve connections, with a maximum total of 12 valves.

• valve

Compact, space-saving high-speed pick-and-place unit. The shortest cycle time is 0.6 seconds. 1) Three types: servo motor drive, pneumatic rotary actuator drive, and no drive. 2) High cycle operation with simultaneous movement in the Y and Z axis directions. 3) Uses high rigidity and high precision guide rails. 4) Stroke adjustment is possible for both the Y and Z axes. 5) Can be equipped with a standby position module to correct work timing, shock absorbers, and switches. 6) Position accuracy at the stop point is ±0.01mm.

• Other industrial robots
• Hydraulic Equipment
• Pneumatic Equipment

■Rich connection variations for pneumatic piping - M3 or QS3, QS4, QS1/16”, QS3/32”, QS1/8” - Top connection PR manifold piping type or base piping type - Standalone valve mounted on a sub-base - Implemented to printed circuit boards (PCBs) using pneumatic multi-connectors ■Operating voltage and electrical connection variations (protection rating IP40) - 24, 12, 5V DC

• valve

【Easy Connection Method】It can be connected to the operating fluid (compressed air) via two anodized aluminum conical connectors. Depending on the application, it is also possible to choose the type of connection screws or adapters. If there are changes in the application or if the rubber cylinder is replaced, the connection screws can be reused. 【MAS: Innovative Principle, Easy Assembly】The Rubber Muscle MAS series is the only actuator that allows you to adjust the length of the cylinder by cutting it with scissors. There are three sizes: 10, 20, and 40, and assembly is easy for any size.

• Pneumatic Equipment

Magnetic scale and magnetic head are mounted on an electric actuator, achieving a repeat positioning accuracy of ±30μm (in-house test data). 1) Maximum stroke of 8500mm (orders can be made in 1mm increments) 2) Repeat positioning accuracy of ±30μm (in-house test data): with magnetic scale 3) Maximum number of positioning points: 250 points 4) Adopts a magnetic scale with a resolution of 5μm, enabling simple feedback 5) Maximum operating speed: 4m/sec 6) Actuator, motor, coupling, coupling case, magnetic scale, magnetic head, dedicated controller, and servo amplifier can be delivered as a package 7) Any manufacturer is acceptable for motors as long as they accept pulse train input.

• Other industrial robots
• Other processing machines
• shaft

The new generation 24VDC high-speed response valve works as its name suggests: a switching time of 2ms to 7ms or less speeds up the overall cycle time of the system and increases productivity. However, it is not just fast. The repeat accuracy operates at a very high precision of 0.2ms (for the MH2). It is easy to expand into existing systems and can also be used as base equipment for new systems. Even when mounted on a manifold, it can be compactly housed with a slim design. It is ideal for applications such as blow sorting with air jets, open/close control systems, bonding, filling, packaging, and work in a vacuum state.

• Pneumatic Equipment

The CPX terminal is a fully modular design telecommunications module that allows for flexible configuration of valve connections and I/O points. It consists of a communication system made up of I/O modules with up to 9 connections and a single bus node or CP interface, equipped with diagnostic functions for I/O and valves. In addition to compatibility with various fieldbuses such as CC-Link and DeviceNet, Ethernet-compatible versions are also available. The protection rating is IP65/67.

• valve
• Pneumatic Equipment
• Other FA equipment

Adopting a new type of profile tube, it supports a maximum stroke of 3000mm. 1) Equipped with a cage-type roller guide in the table for all sizes. 2) A variety of options including standard tables, long tables, tables with built-in dust wipers, long tables with built-in dust wipers, and additional tables. 3) The ability to specify a reserve stroke to protect the actuator from issues such as overrunning. 4) Compatible with motors and reducers from various manufacturers both domestically and internationally → Comprehensive support from selection to delivery according to customer specifications. 5) Uses a cover strap, also employed in rodless cylinders, to protect the ball screw from dust and other contaminants.

• Other processing machines
• shaft
• Actuator

The DGC series is a rodless cylinder that minimizes air leaks with a new sealing method and can accommodate long strokes. It comes in six sizes ranging from φ8 to φ40, with maximum strokes of 1,500mm for φ8, 2,000mm for φ12, 3,000mm for φ18, and 5,000mm for φ25, φ32, and φ40. All models are equipped with guides, and you can choose from simple guides, sliding guides, or roller guides. Shock absorbers are also available. The maximum operating speed is 3m/sec. Loads and combination devices can be mounted directly on the table.

• Hydraulic Equipment
• cylinder
• Pneumatic Equipment

An electric actuator that achieves high speed, high thrust, and high rigidity. There are three types: belt-driven, ball screw-driven, and guide units without drive, each available in 4 to 5 models. All models are equipped with cage-guided rollers built into the table. The adoption of a new profile tube allows for compatibility with long stroke lengths.

• Actuator

A rodless cylinder that minimizes air leaks with the new sealing method and is also compatible with long strokes.

• cylinder

A telecommunications module with a completely modular design, allowing for flexible configuration of valve connections and I/O points. It consists of I/O modules with up to 9 connections and a single bus node or CP interface, equipped with diagnostic functions for I/O and valves. In addition to compatibility with various fieldbuses, Ethernet-compatible options are also available. The protection rating is IP65/67.

• Other electronic parts