ＭＲＴ List of Products and Services

Report cumulative flow data to smartphones and tablets, providing advance notifications for filter replacement timing and lifespan predictions. The information reception settings can be configured by selecting either days (daily/weekly/monthly) or flow, with customizable values for each. The dedicated app is available from the App Store and Google Play (currently under development). ◆ Technical standards certification obtained (Certification number 020-170189, December 2017) ◆ 【No power supply needed!】 The controller operates on two AA alkaline batteries. Depending on the environmental conditions, the average continuous operating time is over one year. ★ Monitor cumulative flow data and report it continuously to the dedicated app ★ 【Examples of use】 - Understanding daily water usage - Confirming the effectiveness of water conservation - Monitoring filter performance - Saving on filter replacement costs - Predicting filter lifespan ● For more details, please download the PDF.

• Other measurement, recording and measuring instruments
• Flow Meter

- The plant growth LED light bar, sunlight type, is equipped with 12 white LEDs that reproduce a light environment similar to sunlight with a color rendering index (Ra) of 97 or higher, and can be dimmed individually in groups of four. - Optionally, white sunlight LEDs (8 units) can be combined with UV LEDs (4 units). - Experiments can be conducted on a wide range of model plants, from Arabidopsis and tomatoes to rice, wheat, tobacco, and fruit vegetables. Examples of growth experiments using rice, algae, and radishes have been presented at academic conferences. - The LED lighting time and dimming can be easily set via a dedicated app on a smartphone or tablet through Bluetooth. - There are a total of 6 dimming patterns, and the timer can be set for up to 8 times a day. - When using multiple LEDs, settings can be copied and pasted. - The main body is made of aluminum with a heat sink finish, and the irradiation surface is glass, achieving high light output while keeping power consumption at 18W. - With a drip-proof structure (equivalent to IP55), it can be installed inside existing incubators or assembled on existing plant shelves while adjusting the spacing of the light bars to design a suitable PPFD for the plants being grown. - The power adapter is PSE compliant, and the cable length is approximately 3 meters.

• Other laboratory equipment and containers
• LED Module
• Other lighting equipment

- The RGB type LED light bar for plant growth provides the necessary wavelengths for plant cultivation and allows independent dimming of red, green, and blue colors. - With a high output of approximately 600 μmol/m2/s at 10cm, it can accommodate a wide range of experiments from model plants like Arabidopsis and tomatoes to mushrooms and leafy vegetables. Many results from these cultivation experiments have been presented at academic conferences. - The LED lighting time and dimming can be easily set via a dedicated app on a smartphone or tablet through Bluetooth. - There are a total of 6 dimming patterns, and the timer can be set for up to 8 times a day. - When using multiple LEDs, settings can be copied and pasted. - The main body is made of aluminum with a heat sink finish, and the irradiation surface is glass, achieving high light output while keeping power consumption at 18W. - With a drip-proof structure (equivalent to IP55), it can be installed inside existing incubators or assembled on existing plant shelves while adjusting the spacing of the light bars to design a suitable PPFD for the plants being cultivated. - The power adapter is PSE compliant, and the cable length is approximately 3m.

• Other laboratory equipment and containers
• LED Module
• Other lighting equipment

- The plant growth LED light bar IR type provides the near-infrared wavelength of 730nm necessary for germination experiments and can be dimmed. - The LED lighting time and dimming can be easily set via a dedicated app on a smartphone or tablet through Bluetooth. - Dimming has a total of 6 patterns, and the timer can be set for up to 8 times a day. - When using multiple LEDs, settings can be copied and pasted. - The main body is made of aluminum with a heat sink finish, and the irradiation surface is glass, achieving high light output while keeping power consumption at 18W. - With a drip-proof structure (equivalent to IP55), it can be installed inside existing incubators or assembled on existing plant shelves while adjusting the spacing of the light bars to design a suitable PPFD for the plants being grown. - The power adapter is PSE compliant, and the cable length is approximately 3 meters.

• Other laboratory equipment and containers
• LED Module
• Other lighting equipment

This plant cultivation incubator is a bio incubator equipped with heating and cooling functions using a Japanese-made Peltier and features a 3-in-1 RGB LED light source. You can also choose a light bar that reproduces the wavelengths of sunlight. It is the perfect incubator for germination and seedling tests of plants such as Arabidopsis thaliana, Micro-Tom, and algae! - Desktop plant cultivation incubator ⇒ A desktop incubator ideal for plant germination and seedling tests Temperature control range: 10 to 40°C Temperature and lighting are controlled by a 24-hour day-night timer program Humidity display is also possible (optional) Internal data can be transferred to a Windows PC via USB - Plant cultivation LED light bar (element configuration) ⇒ Two types of LEDs can be selected: ☆ RGB (450nm, 525nm, 660nm) 4 elements × 3 = 12 units ☆ Sunlight wavelength (Ra97) 12 units ● For more details about the product, please download the PDF.

• incubator
• Plastic utensils and containers
• LED lighting

I want to measure with a spectrometer, but opening the inspection box changes the environment. Since it will be used on the manufacturing line, a high-end model is not necessary. Here is the ideal spectrometer for such requests. The "Agewavelength" can measure the wavelength distribution of the light source, PPFD, illuminance, and color rendering evaluation all in one device. It comes with a 1.5m waterproof cable, allowing measurements inside artificial weather devices! 【Features】 ◇ Achieves a low cost of under 200,000 yen! ◇ Uses a Japanese-made ultra-compact CMOS sensor with a diffraction grating! ◇ PPFD is calibrated using the latest model from Li-Cor! ◇ Illuminance (Lx), wavelength distribution, and color rendering evaluation are adjusted with a standard device calibrated by JQA! This product is ideal for those who already own a spectrometer as a comparison or backup device, as well as for those considering their first purchase. * For those who only have Linux, it is sold as a set with a WinPC. * The price includes software. ● For more details, please download the PDF and take a look.

• Other environmental analysis equipment
• Other laboratory equipment and containers
• Other measurement, recording and measuring instruments

- The MF series is an inexpensive float switch with improved usability and safety. - It has obtained UL certification. *Please contact us for details* - The materials in contact with the liquid include PP, Teflon PVDF, nylon, and stainless steel. - It complies with RoHS standards. - The resin molded type is equipped with ribs (protrusions) to prevent sticking due to water stains or chemicals. - Most models come with gaskets and O-rings.

• Piping Materials
• Sensors
• Liquid level control/level switch

The small flow switch is an inline flow switch suitable for liquids and air in pipes with diameters ranging from 1/2” to 1”. Utilizing magnetic force, it offers high accuracy and can detect flow rates from 0.3L/m to 18L/m for water. Since it does not use springs, there are no clogging points, and issues such as spring aging, rust, and corrosion are eliminated.

• Flow Control
• Piping Materials
• Sensors

Digital display of cumulative flow. It allows monitoring of hose water flow. Easily attachable with screws compatible with size 20. Powered by a convenient coin battery with a lifespan of approximately 120 hours. It features an auto-off function. Ideal for water conservation, reducing water costs, and traceability for farmers.

• Piping Materials
• Flow Control
• Other electronic measuring instruments

The DF6700 series is a vane-type flow indicator. Instantaneous flow and cumulative flow can be switched and displayed with the push of a button. It allows for easy checking of both cumulative and instantaneous flow. It operates on two alkaline batteries, making it portable for measurements anywhere. Additionally, it is compatible with low flow rates (models -0, -1). The movement of the vane, which contains a permanent magnet, is detected non-contact by a reed switch element inside the main unit, converting the flow rate of the fluid passing through into a pulse signal that is displayed as flow rate. It automatically turns on when there is flow and starts measuring. If there is no inflow for more than 10 seconds, it automatically turns off, and the cumulative flow is recorded in non-volatile memory. The measurement accuracy is ±10% RD, making it suitable for applications where a rough estimate of flow rate is desired at a low cost.

• Piping Materials
• Flow Control
• Other electronic measuring instruments

The DF6700 series is a vane-type flow indicator. Instantaneous flow and cumulative flow can be switched and displayed with the push of a button. It allows for easy checking of both cumulative and instantaneous flow. It operates on two alkaline batteries, making it possible to measure anywhere. Additionally, it supports low flow rates (specifically, 0.1). The movement of the vane, which has a permanent magnet built-in, is detected non-contact by a reed switch element inside the main unit, converting the pulse signals proportional to the fluid flow passing through into a flow display. It automatically turns on when there is flow and starts measuring. If there is no inflow for more than 10 seconds, it automatically turns off, and the cumulative flow is recorded in non-volatile memory. With a measurement accuracy of ±10% RD, it is suitable for applications where you want to know an approximate flow rate at a low cost.

• Piping Materials
• Flow Control
• Other electronic measuring instruments

The DF6700 series is a vane-type flow indicator. Instantaneous flow and cumulative flow can be switched and displayed with the push of a button. It allows for easy checking of both cumulative and instantaneous flow. Operating on two alkaline batteries, it is portable and can be used for measurements anywhere. It also supports low flow rates (specifically, 0.1). The movement of the vane, which contains a permanent magnet, is detected non-contact by a reed switch element inside the main unit, converting the pulse signals proportional to the fluid flow passing through into flow readings. It automatically turns on when there is flow and begins measuring. If there is no inflow for more than 10 seconds, it automatically turns off, and the cumulative flow is recorded in non-volatile memory. The measurement accuracy is ±10% RD, making it suitable for applications where a low-cost estimate of flow is desired.

• Piping Materials
• Flow Control
• Other electronic measuring instruments

The DF6700 series is a vane-type flow indicator. Instantaneous flow and cumulative flow can be switched and displayed with the push of a button. It allows for easy checking of cumulative and instantaneous flow. It operates on two alkaline batteries, making it possible to measure anywhere. Additionally, it supports low flow rates (specifically, 0.1). The movement of the vane, which has a built-in permanent magnet, is detected non-contact by a reed switch element inside the main unit, converting the pulse signal proportional to the fluid flow passing through into a flow measurement display. It automatically turns on when there is flow and starts measuring. If there is no inflow for more than 10 seconds, it automatically turns off, and the cumulative flow is recorded in non-volatile memory. The measurement accuracy is ±10% RD, making it suitable for applications where a low-cost estimate of flow is desired.

• Piping Materials
• Flow Control
• Other electronic measuring instruments

The DF6700 series is a vane-type flow indicator. Instantaneous flow and cumulative flow can be switched and displayed with the push of a button. It allows for easy checking of cumulative and instantaneous flow. Operating on two alkaline batteries, it is portable and can be used for measurements anywhere. It also supports low flow rates (specifically, 0.1). The movement of the vane, which contains a permanent magnet, is detected non-contact by a reed switch element inside the main unit, converting the pulse signals proportional to the fluid flow passing through into a flow display. It automatically turns on when there is flow and starts measuring. If there is no inflow for more than 10 seconds, it automatically turns off, and the cumulative flow is recorded in non-volatile memory. The measurement accuracy is ±10% RD, making it suitable for applications where a low-cost estimate of flow is desired.

• Piping Materials
• Flow Control
• Other electronic measuring instruments

The DF6700 series is a vane-type flow indicator. Instantaneous flow and cumulative flow can be switched and displayed with the push of a button. It allows for easy checking of both cumulative and instantaneous flow. Operating on two alkaline batteries, it is portable and can be used for measurements anywhere. Additionally, it supports low flow rates (specifically, 0.1). The movement of the vane, which contains a permanent magnet, is detected non-contact by a reed switch element inside the main unit, converting the pulse signals proportional to the fluid flow passing through into a flow display. It automatically turns on when there is flow and starts measuring. If there is no inflow for more than 10 seconds, it automatically turns off, and the cumulative flow is recorded in non-volatile memory. The measurement accuracy is ±10% RD, making it suitable for applications where a rough estimate of flow is desired at a low cost.

• Piping Materials
• Flow Control
• Other electronic measuring instruments

The DF6700 series is a paddle wheel flow meter. Instantaneous flow and cumulative flow can be switched and displayed with the push of a button. It allows for easy checking of both cumulative and instantaneous flow. Operating on two alkaline batteries, it is portable and can be used for measurements anywhere. It also supports low flow rates (specifically, 0.1). The movement of the paddle wheel, which contains a permanent magnet, is detected non-contact by a reed switch element inside the main unit, converting the flow rate of the fluid passing through into a pulse signal that is displayed as flow rate. It automatically turns on when there is flow and begins measuring. If there is no inflow for more than 10 seconds, it automatically turns off, and the cumulative flow is recorded in non-volatile memory. The measurement accuracy is ±10% RD, making it suitable for applications where a low-cost estimate of flow rate is desired.

• Piping Materials
• Flow Control
• Other electronic measuring instruments

To prevent scaling in cooling towers and heat pipes, we monitor the corrosion of pipes caused by concentrated residual chlorine and calcium carbonate. This single unit measures the increase in concentrated chlorine levels via conductivity, the rise in calcium carbonate hardness through TDS, and the timing for membrane replacement based on cumulative flow, notifying you with a buzzer alarm. With just the button operation on the surface panel, you can switch displays and toggle between manual and auto modes. ■ TDS or conductivity selection: You can choose which one to display (settings can be changed on-site). ■ Manual mode: It measures and displays the current flow rate and water quality. ■ Auto mode: It automatically determines whether the average values of conductivity and TDS exceed the set upper limit alarm for every 40L of flow. Even during power outages or battery replacements, the alarm settings and cumulative flow values are automatically saved in internal memory. For installation, please use conversion adapters to connect to G1", 1/2", or 3/4" pipes.

• Flow Control
• filter
• Water quality testing

The DF6700 series is a vane-type flow indicator. Instantaneous flow and cumulative flow can be switched and displayed with a button operation. It allows for easy checking of both cumulative and instantaneous flow. Operating on two alkaline batteries, it is portable and can be used for measurements anywhere. It also supports low flow rates (specifically, 0.1). The movement of the vane, which has a built-in permanent magnet, is detected non-contact by a reed switch element inside the main unit, converting the pulse signals proportional to the fluid flow passing through into flow readings. It automatically turns on when there is flow and starts measuring. If there is no inflow for more than 10 seconds, it automatically turns off, and the cumulative flow is recorded in non-volatile memory. The measurement accuracy is ±10% RD, making it suitable for applications where a rough estimate of flow is desired at a low cost.

• Piping Materials
• Flow Control
• Other electronic measuring instruments

The USB temperature/humidity data logger is a device that can measure and store 64,000 temperature readings or 32,000 readings each of temperature and humidity. You can set parameters such as sampling time, data display, upper and lower limit alarms, start and end times, and triggers. With its plug-and-play feature, you can simply plug the device into a computer's USB port to retrieve the recorded data. The dedicated software for displaying graphs includes convenient features such as zoom and Min/Max. Additionally, it can also save data in CSV format.

• Data Logger
• Temperature and Humidity Control
• Other physicochemical equipment