三協インタナショナル Product Lineup

It precisely controls two pressure systems. Removable sensors can be built in, with a maximum of two for each, accommodating a wide range. Range: -100 kPa to 21 MPa Accuracy: 0.01% FS or IS-50.

It can accommodate three sensors, allowing for high-precision calibration across a wide range. It features ultra-precise control using a specially designed needle valve.

It controls a single pressure system. Up to two removable sensors can be built in. It has many digital communication ports and allows for remote operation. It features leak testing and burst testing capabilities. Range: -100 kPa to 21 MPa Accuracy: 0.02% FS or IS-50

It is a handheld multifunction calibrator from Beamex. It integrates essential functions for on-site calibration/testing, such as pressure, temperature, and electrical (current, voltage, frequency, resistance) in one device.

It is a handheld multifunction calibrator. It integrates essential functions for on-site calibration/testing, such as pressure, temperature, and electrical (current, voltage, frequency, resistance) in one device.

Pressure range: 0.5 to 70 MPa, 2 to 160 MPa Maximum accuracy: 0.01 %FS Control stability: <0.005 %FS

*Maximum operating pressure: 21MPa *Seamless operation in automatic and manual modes

Outer diameter: 6mm Length: specified length (minimum 250mm) Operating pressure: maximum 40MPa Pressure medium temperature range: -40 to 70℃ Pipe fittings: 1/4" or 1/8" Inner tube: polyester

The liquid tank uses silicone oil, and the temperature in the bath is maintained uniformly and stably. The test specimen and reference thermometer are installed in the bath to compare and calibrate the temperature.

Platinum temperature measurement resistance body with AC resistance bridge High precision: ±1 ppm/±0.25 mK at 0.01 ℃ Resolution: 0.1 ppm/0.001 mΩ/0.01 mK

The pressure controller "CPC3050" is specialized for high-speed pressure control, capable of performing 25% FS control within 4 seconds. In contrast, conventional products that prioritize stability required 15 seconds for 10% FS control, significantly reducing work time. Efficiency improvements will be seen not only in pressure sensor production facilities but also in calibration institutions. 【Main Features】 ◆ The accuracy of the reference pressure sensor is 0.02% FS, and the control stability is 0.025% FS. ◆ The range of the reference pressure sensor can be customized up to a maximum of 21 MPa. ◆ It enables precise measurements across a wide range. When equipped with an optional atmospheric pressure sensor, gauge pressure and absolute pressure can be changed as needed. *For detailed specifications, please download the PDF. Feel free to contact us.

Compact and portable Easy sensor installation Simple one-button operation Calibration with automatic shutdown (50 sec) Durable black anodized aluminum body

This is a humidity generator using the two-temperature, two-pressure method manufactured by RHSystems. It has a spacious chamber measuring 380mm x 300mm x 300mm and can accommodate a wide range of temperatures and humidity levels. Operation is performed via a multi-touch screen, making it easy to use.

This is a humidity generator using the 2-pressure method made by Thunder Scientific. You can choose from two chamber sizes, and it is possible to control the generation program via a USB interface.

This is an electric pressure pump that can automate the generation of pressure, which is a challenge in on-site pressure calibration. It is a handy, battery-operated pressure generator that can easily and quickly generate pressure in the range of -85 kPa to 2 MPa. The generated pressure can be adjusted manually, and when combined with Beamex's MC6 portable calibrator, it enables automatic pressure calibration on-site.

It is a handheld multifunction calibrator with explosion-proof specifications from Beamex. It combines essential functions for on-site calibration/inspection, such as pressure, temperature, and electrical (current, voltage, frequency, resistance) in one device.

It is a portable multifunction calibrator from Beamex. In addition to pressure and electrical (current, voltage, frequency, resistance) calibration functions, it is equipped with a temperature dry block, making it capable of performing temperature calibration on-site.

This is a weight-type pressure standard device from DH-Desgranges & Huot. It has a maximum pressure range of 500 MPa and an accuracy of 0.002 to 0.008% of reading.

In the semiconductor manufacturing industry, particularly in the film deposition process, precise control of pressure is essential for the formation of high-quality thin films. Pressure controllers play a crucial role in ensuring the stability and reproducibility of the deposition process. Even slight fluctuations in pressure can affect film thickness and composition, potentially impacting the performance of the final product. The CPC6050 supports the optimization of the deposition process through high-precision pressure control. 【Application Scenarios】 - CVD (Chemical Vapor Deposition) - PVD (Physical Vapor Deposition) - ALD (Atomic Layer Deposition) - Sputtering 【Benefits of Implementation】 - Stabilization of the deposition process - Improvement of film quality - Enhancement of yield

In the aerospace industry, leak tests require high precision and reliability. Detecting leaks that affect the safety of the aircraft is a very important process in the manufacturing process. Accurate pressure control is essential to avoid missing small leaks. The pressure controller CPC6050 enhances the reliability of leak tests through high-precision pressure control. 【Application Scenarios】 - Leak testing of aircraft components - Leak testing of space-related equipment - Leak testing in research and development 【Benefits of Implementation】 - Improved accuracy of leak tests - Reduced testing time - Enhanced product quality

In the automotive industry, accurate pressure control is essential for ensuring safety and evaluating performance during brake tests. The performance of the brake system is greatly influenced by precise pressure adjustments and stability, and even slight errors can affect test results. The pressure controller CPC6050 enhances the reliability of brake tests through high-precision pressure control. 【Application Scenarios】 - Performance evaluation of brake calipers - Durability testing of brake master cylinders - Operation verification of ABS (Anti-lock Braking System) 【Benefits of Implementation】 - Improved reliability of test data - Reduced testing time - Increased efficiency in product development

In experimental research and development, precise pressure control is required. Particularly in the development of new materials and processes, even slight fluctuations in pressure can significantly impact experimental results. If high-precision pressure control is not achievable, the reproducibility of experiments may be compromised, leading to inaccurate data. The pressure controller CPC6050 precisely controls two pressure systems and accommodates a wide range through removable sensors, thereby enhancing the reliability of experiments in research and development. 【Application Scenarios】 - Material testing - Fluid control experiments - Calibration of pressure sensors 【Benefits of Implementation】 - Improved reliability of experimental data - Enhanced reproducibility of experiments - Increased efficiency in research and development

In the environmental testing industry, precise pressure control is required in temperature cycling tests. Particularly in tests that evaluate the expansion and contraction of materials due to temperature changes and the effects of pressure, high-precision pressure control significantly affects the reliability of test results. Inadequate pressure control can lead to errors in test results or damage to the test subjects. The pressure controller CPC6050 supports accurate data acquisition in temperature cycling tests through high-precision pressure control. 【Application Scenarios】 - Temperature cycling tests - Material testing - Product evaluation 【Benefits of Implementation】 - Improved reliability of test results through high-precision pressure control - Compatibility with a wide pressure range - Enhanced adaptability to tests through flexible system configuration

In the vacuum forming industry, precise pressure control is essential for shape control, which significantly affects product quality. Molding defects can reduce product yield and potentially lead to increased costs. The pressure controller CPC6050 accurately controls two pressure systems and accommodates a wide range with removable sensors, contributing to solving the challenges of shape control in vacuum forming. 【Usage Scenarios】 - Pressure control for vacuum forming machines - Optimization of the molding process - Quality management of products 【Benefits of Implementation】 - Reduction of molding defects through high-precision pressure control - Improvement of product yield - Cost reduction

In the pharmaceutical industry, accurate temperature management is essential for quality assurance. Even slight fluctuations in temperature during the manufacturing process or storage environment of pharmaceuticals can significantly impact product quality and efficacy. Calibration of temperature measuring devices is crucial to ensure product quality and comply with regulatory requirements. The CTR6500 is designed to meet the stringent demands of the pharmaceutical industry, providing accurate temperature calibration. 【Usage Scenarios】 - Temperature management in pharmaceutical manufacturing processes - Temperature monitoring in pharmaceutical storage facilities - Calibration of temperature measuring devices 【Benefits of Implementation】 - Assurance of product quality - Regulatory compliance - Improved reliability of temperature measurements

In the food industry, accurate temperature management is essential to ensure product quality and safety. Particularly in the storage and transportation of refrigerated and frozen foods, even slight temperature fluctuations can lead to quality degradation and an increased risk of foodborne illness. Insufficient temperature management can result in health hazards for consumers and a loss of trust for companies. The CTR6500 enhances the reliability of temperature management through high-precision temperature calibration, contributing to the preservation of food quality. 【Usage Scenarios】 - Temperature management in food manufacturing, storage, and transportation - Calibration of refrigerators, freezers, thermometers, etc. - Quality control departments in food factories 【Benefits of Implementation】 - Improved accuracy in temperature management leading to quality preservation - Ensured product safety - Compliance with regulations

In the petrochemical industry, the accuracy of temperature measurement is essential for the safe operation of plants and the maintenance of product quality. In particular, temperature management in high-temperature and high-pressure environments is directly linked to accident prevention and efficient production activities. Any errors in temperature measurement can lead to abnormal reactions or damage to equipment. The CTR6500 ensures safety and supports stable operations through high-precision temperature calibration. 【Usage Scenarios】 - Calibration of temperature sensors in plants - Temperature monitoring of chemical reaction processes - Temperature checks in safety management systems 【Benefits of Implementation】 - Improved safety of plants - Stabilization of product quality - Increased reliability of measurement data

In the aerospace industry, precision measurement requires high accuracy and reliability. Temperature variations directly affect the performance and safety of aircraft, making accurate temperature measurement and calibration essential. The CTR6500 achieves precise temperature measurement and calibration using platinum resistance thermometers, meeting the stringent demands of the aerospace sector. 【Application Scenarios】 - Calibration of aircraft temperature sensors - Temperature measurement in space development - Precision temperature measurement in research and development institutions 【Benefits of Implementation】 - Improved quality through high-accuracy temperature measurement - Enhanced reliability of measurement data - Increased efficiency of calibration work

In the semiconductor industry, the miniaturization of manufacturing processes is advancing, and the precision of temperature management greatly affects yield. In particular, slight fluctuations in temperature during wafer manufacturing and device characterization can impact product quality, making high-precision temperature calibration essential. The CTR6500 is a new automatic AC resistance bridge for platinum resistance thermometers, which solves the challenges of temperature management in semiconductor manufacturing with excellent stability and high resolution. 【Usage Scenarios】 - Temperature management in wafer manufacturing processes - Characterization of semiconductor devices - Calibration of temperature sensors 【Benefits of Implementation】 - Stabilization of manufacturing processes - Improvement of yield - Enhancement of product quality

In the energy industry, temperature management is essential for efficient operation and ensuring safety. In situations where temperature changes significantly affect performance, such as in power plants and transmission equipment, accurate temperature measurement and calibration are required. Inaccurate temperature measurements can lead to equipment overload or failure, potentially compromising the stability of energy supply. The CTR6500 is a new automatic alternating current resistance bridge for platinum resistance thermometers, achieving accurate temperature calibration with excellent stability and high resolution. 【Usage Scenarios】 - Temperature measurement in power plants - Temperature monitoring of transmission equipment - Calibration work for energy-related equipment 【Benefits of Implementation】 - Stable operation of equipment through accurate temperature measurement - Increased efficiency of calibration work - Improved reliability of energy supply

In the automotive industry, durability testing is essential for evaluating the performance of parts and systems under various environmental conditions. In particular, durability against temperature changes is a crucial evaluation criterion, requiring accurate temperature measurements. Errors in temperature measurement can not only undermine the reliability of test results but also lead to delays in product development and increased costs. The CTR6500 is an AC resistance bridge for platinum resistance thermometers, which enhances the reliability of temperature measurements in durability testing due to its excellent stability and high resolution. 【Usage Scenarios】 - Temperature cycle testing of automotive parts - Engine performance testing - Durability testing of the entire vehicle 【Benefits of Implementation】 - Improved reliability of test results through accurate temperature measurements - Shortened development time due to increased accuracy of test data - Enhanced product quality

In the medical device industry, the accuracy of temperature management is crucial for maximizing patient safety and treatment effectiveness. For devices such as thermometers and surgical instruments, where temperature directly impacts treatment outcomes, precise temperature measurement and calibration are essential. The temperature calibrator CTR6500 is required to enhance the reliability of temperature measurements in medical settings and to maintain the performance of the equipment. 【Usage Scenarios】 - Calibration of thermometers - Temperature management of medical incubators - Temperature management of surgical instruments 【Benefits of Implementation】 - Improved measurement accuracy of medical devices - Enhanced safety for patients - Strengthened quality control in medical settings

Accurate temperature measurement is essential for data acquisition in research institutions. In particular, even slight fluctuations in temperature can significantly impact results in precise experiments and research. The CTR6500 is an AC resistance bridge for platinum resistance thermometers, achieving accurate temperature measurements with excellent stability and high resolution. 【Usage Scenarios】 - Research related to temperature - Evaluation of temperature characteristics of materials - Calibration of various sensors 【Benefits of Implementation】 - High-precision data acquisition - Improved reliability of experimental results - Enhanced research efficiency

In the metal processing industry, particularly in the heat treatment process, temperature management is crucial as it significantly affects product quality. Even a slight deviation in heat treatment temperature can have a major impact on the strength and durability of metals, necessitating precise temperature measurement and control. The temperature calibrator CTR6500 is essential for calibrating heat treatment furnaces and thermometers, enhancing the reliability of the heat treatment process. 【Usage Scenarios】 - Calibration of heat treatment furnace temperatures - Calibration of thermometers - Quality control of metal products 【Benefits of Implementation】 - Improved product quality through accurate management of heat treatment temperatures - Reduction of defective products - Stabilization of processes

In the electronic equipment manufacturing industry, temperature management is crucial to ensure product reliability. Temperature fluctuations can lead to performance degradation and failure of electronic components. The CTR6500 is essential for guaranteeing the accuracy of temperature measurements and improving product quality and reliability. 【Usage Scenarios】 * Temperature measurement in the manufacturing process of electronic devices * Temperature calibration in quality control departments * Evaluation of temperature characteristics in research and development 【Benefits of Implementation】 * Improvement in product quality * Reduction of defective products * Gaining customer trust