西進商事 List of Products and Services

The "PHV-R Series" is a steam saver that can continuously discharge steam and condensate (moisture from steam) without separating them. It has a long lifespan and high durability, requiring almost no maintenance when used at pressures below 1.0 MPa. The need for replacement due to deterioration is nearly zero, allowing for a reduction in maintenance costs. Additionally, it enables "group trapping," which allows multiple traps to be consolidated into one unit, significantly reducing installation and management efforts. 【Features】 ■ A "new energy-saving tool" that replaces steam traps ■ Long lifespan and high durability (5 to 10 years) ■ Reduction in the number of trap installations ■ Recovery of waste heat up to below 100°C ■ Savings in transport power through pressure reuse ■ No thermal loss due to flash steam *For more details, please download the PDF or feel free to contact us.

• Steam Trap

The small giant, Raman EYE. Though compact in size, its analytical power is overwhelming. Conventional Raman spectrometers have been large and expensive, making them inaccessible to everyone. This product is the world's smallest Raman sensor that can be used simply by attaching it to your existing microscope.

• Raman Spectrophotometer

We would like to introduce the "Attachable Raman Sensor" that we handle. Instead of expensive and large Raman microscope systems, it can be easily attached to your existing microscope in just one minute, achieving overwhelming cost performance. As one of the world's smallest plug-in mini Raman devices, it instantly transforms your microscope into a Raman device. You can immediately perform Raman spectroscopic measurements using your smartphone or tablet. 【Features】 ■ One-fifth the price of conventional products ■ Highly sensitive micro Raman spectroscopic sensor ■ Micro Raman spectroscopic sensor that fits in the palm of your hand ■ Remote measurement capability (check measurement results anywhere using a tablet or smartphone) *For more details, please download the PDF or feel free to contact us.

• Sensors

We would like to introduce our generative AI specialized in data analysis. Through automation, the efficiency of the analysis center's operations has significantly improved. By reducing labor costs and unnecessary resources, we can greatly cut costs. Real-time data analysis is now possible in each department, supporting swift decision-making. By implementing advanced analytical technologies, we can secure a competitive advantage in the market. [Features] ■ Raman analysis can be performed without specialized knowledge ■ Improved work efficiency ■ Rapid decision-making ■ Cost reduction ■ Secured competitive advantage *For more details, please download the PDF or feel free to contact us.

• Spectroscopic Analysis Equipment

The "Vaplock system" is a sealed reagent supply and discharge system that can be attached to reagent bottles and waste liquid tanks. Thanks to its unique structure, it supplies and discharges reagents without volatilizing in the laboratory. A filter connected to the waste liquid bottle traps vapors that volatilize from the waste liquid. It is also compatible with GL38 and GL45 standard bottles, as well as poly tanks, making it useful for compliance with labor safety and health regulations. 【Features】 ■ Attaches to reagent bottles and waste liquid tanks ■ Supplies and discharges reagents without volatilizing in the laboratory due to its unique structure ■ High airtightness eliminates concerns about liquid leakage ■ Compatible with GL38 and GL45 standard bottles and poly tanks *For more details, please refer to the PDF document or feel free to contact us.

• Other physicochemical equipment

The legendary original Air Leak Viewer "MK-750" will unfortunately cease production as of June 30, 2023 (Friday). Therefore, starting in July 2023, we will be offering it at a clearance price. Although it is an older model, it has the same purpose and equivalent performance as the current new model "MK-750ST," and we believe it can meet your needs. Please feel free to contact us if you have any inquiries. *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices
• Vibration Inspection
• Leak Testing Equipment

We would like to introduce our Air Leak Viewer 'MK-750'. It detects ultrasonic waves generated by air leaks using an array sensor and displays a sound pressure map, allowing for the identification of the direction of the ultrasonic source. It can also detect leaks in remote locations, such as overhead piping. 【Features】 ■ Quickly identifies leak locations over a wide range (49° horizontally, 27° vertically) ■ Detects leaks in remote locations, such as overhead piping ■ Identifies leak locations even in noisy environments by using ultrasound to determine the direction of the sound source ■ Displays camera images and sound pressure maps, and saves them to an SD card *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices
• Vibration Inspection
• Leak Testing Equipment

The "LASER BLENDER" is a laser ablation device that achieves high-speed and high-precision LA-ICP analysis. It enables direct approaches to solid samples, allowing for "local," "imaging," and "depth" analysis. It not only simplifies the preprocessing for ICP analysis but also expands the range of analytical methods, including direct solid analysis, high-speed analysis, and local analysis. 【Features】 ■ Reduces thermal effects and refines generated particles for high precision using FHG f's laser ■ High-speed ablation with a galvanometer scanner ■ Enables high spatial resolution measurements with a minimum focal diameter of 1μmΦ ■ Equipped with a goniometer to correct sample tilt ■ Arbitrary setting of ablation shapes using a tablet device *For more details, please refer to the related links or feel free to contact us. Exhibition Participation JASIS 2023 Advanced Science and Analytical Systems & Solutions Exhibition Date: September 6-8, 2023, 10:00 AM - 5:00 PM Venue: Makuhari Messe International Exhibition Hall, 2-1 Nakase, Mihama-ku, Chiba City, Chiba Prefecture 261-0023 Booth: 4B-206

• Analytical Equipment and Devices

Our company offers a "Domestic Agency Service for Overseas Skill Testing" aimed at testing laboratories that wish to request skill tests from overseas testing institutions. We cater to various fields, including chemical testing for steel and non-ferrous metals, consumer safety tests, mechanical tests, and food-related tests. In addition to applying for participation in tests, we provide one-stop support for remitting testing fees and customs operations for importing samples used in skill tests. 【Features】 ■ We request evaluations from accredited testing institutions in the UK, USA, China, France, etc., that have obtained ISO/IEC 17043 certification. ■ Participants can compare their analytical capabilities with other testing laboratories, which can be utilized for precision management, technical skill improvement, and quality management enhancement. ■ It can also be used to obtain ISO/IEC 17025 certification. *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Contract Analysis

We have released a handheld laser welding machine equipped with a cooling CW 1500W light source. With the wobble function, it can easily weld even slight gaps. There is also a higher model available, the QCW1500W/2500W. We have demo units available, so please contact us. You can download the catalog from the special website.

• Welding Machine
• Welding robot

Are you having trouble removing rust and dirt from machine parts? With the JPT Laser Cleaner CL100, you can do it efficiently. Here are three highlights of this product! ◾️ Lightweight design suitable for long-term use. The head weighs only 620g. ◾️ Easy settings with a wireless remote control. ◾️ Affordable price range for easy introduction. Laser Cleaning For those considering laser cleaning!

• Plastic bearings
• Resistors
• Casting Machine

Royal Purple's RP-LUCID: A Choice for Professionals Where Compromise is Not Allowed ● Royal Purple oils: - Form a robust oil film on sliding surfaces (can withstand high loads) - Have high oxidation stability for a longer lifespan (reduces the frequency of oil changes) - Excellent water separation properties keep equipment dry (resistant to rust) - Significantly reduce vibrations, contributing to energy savings (2-3% based on actual data) ● Thanks to the synthetic effect of Synerlec: - Reduces the likelihood of oil film breakage - Contributes to the longevity of equipment - Reforms the oil film on worn sliding surfaces (→ suppresses vibrations and oil temperature) There are various other benefits as well. Experience the overwhelming power of Royal Purple for yourself. You can check the differences in the videos and downloadable materials. <Sample Provision Ongoing> We have some samples available. Please feel free to contact us.

• Metal bearings
• Plastic bearings
• Hydraulic Equipment

Our company has been developing, manufacturing, and selling various equipment for manufacturing lines in the semiconductor and electronic components industry as a factory automation system integrator. We also offer OEM (contract manufacturing) services for machine design, electrical design, and machine assembly. If you are facing issues with production capacity, personnel shortages, or technology transfer, please feel free to consult with us. We can also manufacture and repair high-precision stages!! Development and Equipment Handling We have a track record of developing, manufacturing, and selling various equipment for manufacturing lines in the semiconductor and electronic components industry: - Various automatic transporters - Automatic screen printing machines - Substrate splitting and storage devices - Character classification taping devices - IH soldering devices - Appearance inspection devices *For more details, please contact us or download the PDF.

• Assembly Machine

The "SS-30WD" is a device that enables various high-precision strength tests, such as wire pull tests and die shear tests, which are necessary for the inspection in the chip LED manufacturing process, all in one unit. Data management of measurement results and setting of measurement parameters can also be managed and configured using the included PC. Additionally, measurements can be conducted while heating as an option. We create various measurement jigs tailored to your measurement methods. We have delivered numerous devices for both LED development and mass production. 【Features】 ■ High reliability ■ Multiple product tests possible with one unit ■ Customizable measurement stage ■ Issuance of calibration certificates from JQA *For more details, please refer to the catalog or feel free to contact us.

• LED
• Other measurement and measuring equipment

Equipped with Hamamatsu Photonics' patented technology "Stealth Dicing Engine," it has become possible to cut transparent materials that were previously said to be difficult to process with precision and high accuracy. We offer free sample processing, so please feel free to contact us. 【Features】 ■ Target materials SiC (silicon carbide), LT (lithium tantalate)/LN (lithium niobate), GaN (gallium nitride), reinforced glass, glass ■ Processing of thin samples under 100μ is also possible ■ Achieves high throughput through high-speed/high-precision processing *For more details, please contact us or download the PDF.

• Laser marker

【For images, please watch the video】 We select laser oscillators tailored to customer requests, accommodating various laser processing applications! Our experienced technical staff is always available for consultations regarding lasers. Sample processing is conducted free of charge. 【Many achievements】 Our company has a wealth of sales experience in laser processing machines for the development and mass production of fine and precision processing applications using "lasers." In particular, we have over 300 installations of laser processing machines for chip resistors and alumina ceramics. Leveraging 20 years of knowledge and experience in laser processing, we propose optical systems and oscillators that meet the material and processing requirements. We can manufacture equipment according to customer preferences! For customers considering purchasing equipment, we offer free sample processing.

• Processing Contract
• Other semiconductor manufacturing equipment
• Laser marker

We would like to introduce the laser scriber 'SS-400BG2' handled by Seishin Shoji Co., Ltd. This product is a device designed for scribing electronic component substrates using solid laser light. The compatible substrate material is mainly alumina ceramic. The target work sizes are 50mm×60mm and 60mm×70mm. *Requests for other sizes can also be accommodated. It is equipped with features such as processing position alignment, automatic control of processing height, and front-back alignment. 【Standard Specifications】 ■ 50mm×60mm and 60mm×70mm *Requests for other sizes can also be accommodated. ■ Loader/Unloader ■ Processing position alignment function ■ Automatic control of processing height function ■ Front-back alignment function *For more details, please refer to the related link page or feel free to contact us.

• Other semiconductor manufacturing equipment
• Laser marker
• Other processing machines

The "SS-100W" is a double automatic screen printing system for chip resistors that enables high-precision screen printing through our unique center positioning mechanism. By supplying the printing functions of two machines simultaneously to a single drying and firing system, we have achieved a reduction in production processes, a decrease in layout space, and a rationalization of labor, resulting in improved productivity and significant cost reductions as a total system. Additionally, by adopting a compact printing head, we are further reducing layout space. 【Features】 ■ Reduction of layout space ■ Rationalization of labor ■ High-precision positioning accuracy *For more details, please refer to the catalog or feel free to contact us.

• Printing Machinery

The "SS-1600SS" is a double-head automatic printing system designed for mass production. It not only maintains high printing accuracy but also enables high productivity and easy handling. Furthermore, it aims for a systematic deployment to meet the stringent usage requirements of each user, going beyond just equipment sales. It is ideal for printing fine patterns such as microchip resistors and LTCC. 【Features】 ■ Capable of mass printing ■ Capable of automatic printing *For more details, please refer to the catalog or feel free to contact us.

• Printing Machinery

Test Items Example - NIL PT-3017 Halogens (Cl, Br) Application Deadline: End of May - NIL PT-2880 Elemental Analysis (Cd, Pb, Hg, Br) Application Deadline: June - NIL PT-3025 Phthalate Esters (RoHS Target Substances, etc.) Application Deadline: June - iis21P07 Brominated Flame Retardants (BDE209, etc.) Application Deadline: July * NIL (China), IIS (Netherlands), LGC (United Kingdom)

• Contract Inspection

By measuring organic substances dissolved in water in real-time, please utilize this for early response to leakage accidents and prevention of discharge accidents threatening rivers and seas. 【Features】 ■ Ultra-high temperature combustion oxidation method at 1200℃, reducing maintenance costs as it does not use metal catalysts ■ Equipped with automatic ultrasonic grinding pretreatment function, preventing clogging through sample homogenization ■ Robotic arm adopted for sample input mechanism, enabling accurate and stable measurements ■ Improvement of accuracy issues due to salt accumulation with smart salt discharge technology Applications / Practical Examples ■ Monitoring of process water within factories, monitoring of discharge outlets, and raw water monitoring for activated sludge treatment *For more details, please download the PDF or contact us.

• Other measurement, recording and measuring instruments

We propose products that respond to various substances such as organic matter dissolved in water, organic matter that absorbs ultraviolet light, and oil floating on the water surface. Please use them for early response to leakage accidents and to prevent outflow accidents that threaten rivers and seas. 【TOC Meter Features】 ■ Real-time monitoring with short measurement time (approximately 2 minutes), capable of monitoring all organic matter dissolved in water. 【UV Meter Features】 ■ Capable of handling low to high concentrations, low maintenance. 【Oil Film Detector Features】 ■ Laser beam scanning type, less affected by water surface waves, low maintenance. Applications / Practical Examples ■ Monitoring drainage channels in factories, monitoring intake points at water purification plants, monitoring rainwater ditches, monitoring activated sludge raw water, ultra-pure water management.

• Other measurement, recording and measuring instruments

This is an oil leak detector developed to prevent oil leaks and oil spill accidents before they occur. 【Detection Mechanism】 The detector is equipped with three electrodes, which measure the capacitance of the electrode section using high frequency generated from the detection circuit. When oil flows onto the water surface, the electrodes come into contact with the water through the oil, causing a significant change in capacitance. This change is detected and amplified by the detection circuit, and output as a contact signal by the converter.

• Other measurement, recording and measuring instruments

The proven performance of Eporaum C has been maintained while achieving a compact and lightweight design. The detector is equipped with three electrodes, which measure the capacitance of the electrode section due to the high frequency generated by the detection circuit. When oil flows onto the water surface, the electrodes come into contact with the water through the oil, resulting in a significant change in capacitance. This change is detected and amplified by the detection circuit and output as a contact signal by the converter.

• Other measurement, recording and measuring instruments

This device focuses on the property that oil has a higher reflectivity than water. By irradiating and scanning the water surface with a semiconductor laser, it captures even slight changes in reflection intensity, allowing for the non-contact, high-precision detection of floating oil films. It can catch oil films as thin as just a few microns. It helps prevent the outflow into rivers and seas, enabling early response to oil spill incidents. Please use it as the "eye" on-site to prepare for environmental risks. - Detects oil films as thin as just a few microns - Strong against waves, currents, and water level fluctuations - Covers still water surfaces up to 6 meters away - High durability design that does not require overhauling for 4 years - Area detection function reduces false positives - Easy-to-use and intuitive operation Equipped with a 3.5-inch large color LCD. It is user-friendly with touch operation and excellent visibility. - Easy installation with no need for optical axis adjustment The unique "bell structure" eliminates the need for fine adjustments during installation, reducing the hassle of setup.

• Water quality testing

The wireless compact monitoring unit "CU-30000" is an online monitoring unit designed for small to medium-sized and temporary applications, targeting vibrations and process data of rotating machinery operating in manufacturing plants. By adopting long-range wireless technology, it enables wide-area measurements and allows for high-precision management with simple operation. It reduces the need for wiring work and provides durable equipment suitable for industrial applications. With equipment configurations tailored to customer needs, it also offers excellent cost performance.

• Testing Equipment and Devices

"Standard materials" refer to reference materials used during analysis. We have compiled frequently asked questions and answers about standard materials! You can find more details through the related links, so please feel free to take a look. [Examples of Questions about Standard Materials] ■ What kind of things are referred to as standard materials? ■ Why are standard materials necessary for analysis? ■ It seems there are "standard materials" and "certified standard materials"; what is the difference? ■ What JIS standards are related to standard materials? ■ When are standard materials used? *For more details, please refer to the related links page or feel free to contact us.

• others

This document provides detailed information on lasers commonly used in manufacturing, covering the basics of lasers that you may hesitate to ask about, such as "the principle of lasers," "the characteristics of lasers," and "the types of lasers." It also categorizes the types of lasers by their processing applications, making it useful for selecting the appropriate laser. Please take a moment to read it. 【Contents】 ■ What is a laser? ■ The principle of lasers ■ Characteristics of lasers ■ What exactly is a laser? ■ What can be done with lasers? ■ Types of lasers *For more details, please refer to the PDF document or feel free to contact us.

• others

The "SS-200PC" from Seishin Shoji is a high-precision printing system equipped with computer control functions for printing conditions and pattern recognition. It not only maintains advanced printing accuracy but also enables high productivity and easy handling. Furthermore, it aims for a systematic deployment to meet the rigorous usage requirements of each user, going beyond just equipment sales. It is ideal for printing fine patterns such as microchip resistors and LTCC. 【Features】 ■ Equipped with computer control functions for printing conditions ■ High-precision printing system with pattern recognition *For more details, please refer to the catalog or feel free to contact us.

• Printing Machinery

The "SS-2000 Series" is a device that automatically inspects the multi-faceted appearance of chip components with high precision and accuracy. From fine chip components such as 0402 and 0603 sizes to special sizes of 1005 to 3216 and above, it enables size compatibility, multi-faceted inspection, high-speed inspection, and high-precision inspection through its unique work transport method and comprehensive inspection software. 【Features】 ■ Capable of inspecting a wide range of products from two-electrode to multi-terminal products ■ Supports inspection of six or more surfaces ■ Allows for size compatibility through disk exchange ■ Options for color cameras and high-resolution cameras available ■ Capable of inspecting round samples with pin shape types *For more details, please refer to the catalog or feel free to contact us.

• Semiconductor inspection/test equipment
• Inspection robot

The "SS-30WD" is a multi-type strength testing machine that can accurately measure various strengths such as wire pull, die shear, and peel strength. By simply changing the installation direction of the load cell, it is possible to handle pull, peel, push, and shear tests with a single unit. By adopting a high-precision micro-stepping motor, stable measurements can be achieved from ultra-low speed to high speed. 【Features】 ■ Capable of handling pull, peel, push, and shear tests with one unit ■ Equipped with a high-precision micro-stepping motor ■ Stable measurements possible from ultra-low speed to high speed ■ The dedicated data processing software automatically captures load fluctuation graphs immediately after measurement ■ Custom solutions tailored to workpieces and measurement content, such as jigs and tools, are available *For more details, please refer to the related link page or feel free to contact us.

• Testing Equipment and Devices

This device can perform various high-precision strength tests, such as wire pull tests and die shear tests, which are required during the chip LED manufacturing process, all with a single unit. By adopting a high-precision micro-stepping motor, stable measurements can be achieved from ultra-low speeds to high speeds. Data management of measurement results and setting of measurement parameters can also be managed and configured using the accompanying PC. Additionally, measurements can be conducted while heating (optional).

• Testing Equipment and Devices
• Analytical Equipment and Devices

Visualizes gas leak locations and contributes to energy savings. The occurrence of air leaks can be easily identified at a glance through camera images. Weighing approximately 800g! Operable with one hand! 【Features】 ■ The highly acclaimed Air Leak Viewer MK-750 has been miniaturized to about half its size! ■ The adoption of a new TFT LCD makes the screen easy to see even outdoors! ■ Newly equipped with a "simple leak volume display function"! ■ A convenient waist bag for portability is available. *Optional ■ Detects ultrasound to pinpoint the direction of the sound source, allowing measurements even in noisy environments! ■ Can quickly identify a wide range of leak locations. ■ Can detect air leaks from a distance, making it ideal for inspecting overhead piping and similar applications.

• Testing Equipment and Devices
• Vibration Inspection
• Leak Testing Equipment

The SPEX company's ambient temperature large-scale grinder (shutter box) is a soundproof swing mill with a 10-minute timer system. Samples and disc-shaped grinding materials are placed inside a ring-shaped container, and by swinging tightly, the samples are crushed. It is capable of grinding 2-150g of cement, soil, ceramics, slag, rocks, and more. There are grinding containers made of hardened steel, tungsten carbide, alumina, zirconia, etc.

• Crusher

The Cole-Parmer Geno Grinder is a preprocessing device that enables rapid and effective simultaneous analysis of pesticide residues using the QuEChERS method. By controlling the operating time of the device, the shaking of samples becomes consistent, eliminating variability. Additionally, it can process up to 16 centrifuge tubes of 50 mL each at once, leading to reduced time and decreased worker fatigue. It is also possible to freeze the samples and shake them.

• Crusher

【Features】 - Adopts an easy-to-read digital meter display. Signal levels are easily identifiable at a glance. - Alarms can be easily set digitally. You can easily set any value in 1% increments using the digital setting switch. - Equipped with level signal and alarm output functions. It includes level signals (DC 4-20mA) and alarm output (relay output). - Allows for precise diagnostics when connected to a portable diagnostic device. By connecting to portable vibration meters MK-220, MK-220HG, or MK-210HE II, precise diagnostics, frequency analysis, and report output are possible. - Power supply is compatible with worldwide voltage. It can use AC 85-264V power supply, making it suitable for worldwide use.

• Testing Equipment and Devices
• Vibration Inspection
• Leak Testing Equipment

【Please watch the operation in the video✨】 What is the Cole-Parmer Cryogenic Grinder? ◾️ Uses liquid nitrogen, allowing for the grinding of difficult samples (such as fibrous and rubber materials) ◾️ Samples are placed in a polycarbonate tube → there is no contact between the liquid nitrogen and the sample 【Widely adopted in analytical laboratories】 It has been widely adopted for pre-treatment in ICP analysis and DNA/RNA extraction. It is mentioned in literature as a successful application for pre-treatment in ICP analysis and DNA/RNA extraction. 【Features】 ■ Adopts a grinding method using high-speed reciprocating motion ■ Prevents material changes due to heat during grinding ■ Minimal vibration and easy installation ■ Compact desktop design suitable for tabletop use ■ Grinding conditions can be stored for each sample *For more details, please refer to the related link page or feel free to contact us. Search keywords: JASIS component analysis RoHS external accuracy management ICP-MS PFOS PFOA perfluorooctanesulfonic acid perfluorohexanesulfonic acid PFAS pre-treatment PFOA pre-treatment PFAS extraction PFOA extraction

• Crusher

The Cole-Parmer company’s room temperature grinder (mixer mill) crushes and mixes samples by placing the sample and grinding balls in a container and rotating them at high speed using a unique method. There are four models available according to the sample size: Model 5120 (small quantity), Model 8000M (up to 10g), Model 8000D (up to 20g), and Model 8530 (up to 100g), which are widely used as pre-treatment devices for XRF samples and powder mixing devices. In recent years, there has been an increase in deliveries to pharmaceutical manufacturers as a grinding method for film-coated tablets, replacing mortar and pestle. Additionally, it can be used for mechanical alloying due to long continuous operation (up to 10,000 minutes). 【Features】 ■ Crushes and mixes samples using a unique method ■ Three models available according to sample size ■ Widely used as a pre-treatment device for XRF samples ■ Usable for mechanical alloying due to long continuous operation (up to 10,000 minutes) ■ Easy sample recovery and container cleaning (Model 8000) *For more details, please refer to the related link page or feel free to contact us.

• Crusher

The Cole-Parmer automatic press machine 'X-Press 3636' is a device that produces highly uniform pellets suitable for fluorescent X-ray analysis and infrared spectroscopy by applying a maximum pressure of 35 tons through an automatic hydraulic press. With program settings via a touch panel, it is easy to set detailed parameters for weight pressure, pressure holding time, and pressure release time. This allows for the creation of uniform samples. By using a dedicated die set, it ensures even pressure application on the samples, enabling appropriate sample molding for analytical measurements. Die set sample sizes: 13mm, 31mm, 35mm, 40mm.

• Other physicochemical equipment
• Powder Molding Machine

The SPEX company's DNA/RNA extraction pre-processing grinder "Genogrinder" is a pre-processing device suitable for agriculture, biology, advanced medicine, and the biotech field. Samples and balls (beads) are set in a container and shaken at high speed. Freeze shaking is also possible with accessories. As long as it can be fixed, you can use your own centrifuge tubes. 【Features】 ■ Destruction of plant and animal cell tissues ■ Up to 4 pieces of 96-well titer plates can be set (optional) ■ Settings from 500 strokes/min to 1700 strokes/min are possible ■ Any container compatible with SBR standards can be set ■ PCR containers can be directly placed in a centrifuge *For more details, please refer to the related link page or feel free to contact us.

• Crusher

Cole-Parmer's KATANAX glass bead production machine and alkaline fusion device offers three models: "K1 Prime (produces 1 piece)", "X-300 (produces 1-3 pieces simultaneously)", and "X-600 (produces 6 pieces simultaneously)." By heating and stirring samples, flux, and release agents in a platinum crucible, and then pouring them into a platinum mold after degassing, it is possible to produce homogeneous glass beads with a good surface condition. Additionally, it allows for safe alkaline fusion. Operation is conducted via a touch panel display, and the fusion conditions can be programmed and saved in the main unit. 【Features】 - Capable of producing homogeneous glass beads with a good surface condition - K1 Prime model produces 1 piece at a time, while X-600 model can produce 6 pieces simultaneously - Uses an electric furnace for the fusion method - Does not require utilities other than power (such as gas or cooling water) - Fusion conditions can be programmed and saved in the main unit *For more details, please refer to the related link page or feel free to contact us.

• Other physicochemical equipment

The "MK-95" is an online iron powder concentration meter that can continuously measure the concentration of iron powder in lubricants. It allows for simple measurement by just passing the lubricant piping through the main unit. The measurement range is from 0.000 to 2.000 wt%, achieving high precision with ±0.020 wt%. One unit can measure up to three points. 【Features】 ■ Simple measurement by just passing the lubricant piping through the main unit ■ Measurement range: 0.000 to 2.000 wt% ■ Achieves high precision with ±0.020 wt% ■ One unit can measure up to three points ■ External output: Analog DC 4-20 mA *For more details, please refer to the related link page or feel free to contact us.

• Testing Equipment and Devices
• Vibration Inspection

The "MK-730/MK-730Air" is a checker that detects abnormalities in rotating machinery, piping, and power distribution equipment. In detecting corona discharge, it identifies surface discharge and air discharge associated with insulation degradation under live conditions. It extracts frequency components specific to discharge and eliminates the influence of noise. Additionally, we offer a dedicated air leak model with a simple leak amount display function. 【Features】 ■ Lineup - Multi-checker "MK-730" - Air leak checker "MK-730Air" ■ Detection of corona discharge - Detects surface discharge and air discharge associated with insulation degradation under live conditions - Extracts frequency components specific to discharge and eliminates the influence of noise *For more details, please refer to the related link page or feel free to contact us.

• Testing Equipment and Devices
• Vibration Inspection
• Leak Testing Equipment

The "MK-560 Series" is a diagnostic tool for low-speed rotating bearings that performs signal processing such as amplification, filtering, and envelope detection to quantify components that deviate from normal signals, thereby enabling diagnosis of acoustic emissions (AE) generated by low-speed rotating bearings. Using newly developed proprietary signal processing, it extracts and parameterizes AE signals during bearing abnormalities and outputs diagnostic results. It is suitable for bearing diagnostics at ultra-low speeds of 1 to 150 rpm. 【Features】 ■ Newly developed diagnostic logic ■ Easy operation ■ Measurement data can be managed and analyzed using spreadsheet software, etc. ■ Highly portable ■ Diagnostic functions specialized for escalator drive components (MK-560ES) *For more details, please refer to the related link page or feel free to contact us.

• Testing Equipment and Devices
• Vibration Inspection
• Flaw detection testing

The "MK-760" is a corona discharge viewer that visualizes corona discharge and can diagnose a wide area in a short time. It detects the ultrasound generated by corona discharge and identifies the sound source direction using beamforming technology. This portable viewer is easy to carry and features a high-speed mode that displays 5 frames of images per second, as well as a detailed mode that shows ultrasound waveforms. 【Features】 ■ Detects ultrasound generated by corona discharge ■ Identifies sound source direction using beamforming technology ■ Analyzes the specific ultrasound frequency of corona discharge to determine if it is discharge-related ■ Wide view with a camera angle of approximately 49° horizontally and 49° vertically ■ Easy-to-carry portable viewer *For more details, please refer to the related link page or feel free to contact us.

• Testing Equipment and Devices
• Vibration Inspection