大栄無線電機 List of Products and Services

In PHA mode, it continuously collects data from 4 channels with a 16-bit ADC every 8 ns, achieving a resolution of 32k. It is equipped with a pole-zero filter and trapezoidal wave shaping, allowing it to process typical preamplifier signals. In MCS mode, it processes the input signals for Start, Stop1, Stop2, and CHADV using the four BNC connectors on the right side. It can store up to 16Mbin of spectra in internal memory.

• Time-frequency measurements
• Other electric meters
• Radiation detector

HallinSight is developed by Fraunhofer IIS (Fraunhofer Institute for Integrated Circuits) and has the following features: - It is a 3-axis magnetic field camera that makes the invisible visible. - It can map dynamic magnetic fields in real-time. - It uses a Hall sensor array that simultaneously measures the X, Y, and Z axes. ⇒ There are three types: 32×32 points, 16×16 points, and 32×2 points. ⇒ Each can measure from a few μT to several T at rates of 25Hz, 100Hz, and 250Hz, respectively.

• Magnetic field analysis/electromagnetic wave analysis

With a simple configuration, a radiation analysis system can be easily constructed. - UCS30 MCA Spectroscopy System Main Unit ⇒ Built-in amplifier and high-voltage power supply - SPA38 Scintillation Probe ⇒ Connected to the UCS30 main unit with two cables (BNC and MHV) - Software for PC ⇒ Connected to the UCS30 main unit with only a USB cable

• Radiation detector
• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

A very uniform magnetic field within a few ppm is required for MRI and similar technologies. NMR is the only magnetic measurement technology that can provide a magnetic field map with that level of precision. The conventional MFC3045 was a groundbreaking product that reduced the time required for magnetic field mapping from several hours to a few minutes, with a positioning error of less than 1mm, keeping human error and drift error at a negligible level. The MFC2046 is a new product that inherits the advantages of the conventional MFC3045 while implementing the following improvements: - Expanded the upper limit of the magnetic field strength that can be mapped from 7T to 30T - Reduced the minimum bore diameter that can be mapped from 220mm to 40mm - Increased the number of NMR probes that can be mounted on the probe array from 32 to 255

• Magnetic field analysis/electromagnetic wave analysis
• Other electric meters
• Testing Equipment and Devices

◆T560 Delay/Pulse Generator - Delay time and pulse width can be specified individually for 4 channels, with settings possible in 10ps increments up to a maximum of 10 seconds. - Input/output delay (insertion delay): 21ns - Maximum trigger rate: 16MHz ◆MCS8A Multi-Stop TDC/TOF - An 8-input digitizer capable of recording multiple event times. - The time difference between START and STOP can be detected with a resolution of 80ps for up to 8.3 days. - STOP can be detected on the rising edge, falling edge, or both edges. - The threshold levels for START and STOP can be set in 1mV increments within the range of -1 to +1.5V. - A multi-event time digitizer with 80ps per time bin and no dead time. ◆MPA4T Combined TDC/TOF and Multi-Parameter MPA - A 5-input digitizer derived from the MCS8A, with 100ps per time bin. - Equipped with an 8-channel ADC input port, functioning as a multi-parameter data acquisition system (MPA). ⇒ Operates as a high-speed list mode system. ⇒ Each ADC input can also connect to multi-scalers or TOF devices.

• Other inspection equipment and devices
• Radiation detector
• Analytical Equipment and Devices

◆ Extremely high precision and accuracy in measuring magnetic flux density and magnetic field strength in strong magnetic fields - Wide measurement range: 38 mT to 30 T - Ultra-high precision: less than 10 ppb at 3T magnetic field - Capable of handling magnetic field gradients of 1000 ppm/cm at 1T magnetic field - Fastest measurement rate of 33Hz ◆ Pulse wave probe with flexible measurement range - One standard probe covers magnetic fields of 1.5T and 3T - 1326 probe: built-in 3-axis Hall element sensor - 1426 probe: suitable for narrow gaps, remote passive head - 1526 probe: suitable for narrow gaps, remote active head ◆ Rich features and expandability - Multifunctional software interface - Upgradeable to magnetic field camera MFC2046 - Upgradeable for multiple point measurements

• Other electric meters
• Testing Equipment and Devices
• Other inspection equipment and devices

Detectors and sensors that detect charge (charge) proportional to the strength of energy include APD (Avalanche Photodiode), PMT (Photomultiplier Tube: Photomultiplier), and MEMS capacitive accelerometers, among others. In charge-sensitive preamplifiers, the output obtained is proportional to the amount of charge received from the detector. They are categorized into four types based on differences in gain. Gaussian shaping amplifiers shape long tail pulse waveforms into Gaussian function waveforms. They are divided into eight types based on differences in shaping time. Baseline restorers are modules that correct baseline shifts and are effective for high count rate input pulses. Using evaluation boards and aluminum housings makes it easy to verify inputs from the target detectors. The finished products of charge-sensitive preamplifiers include those compatible with the high voltage bias of detectors and specialized products for photomultipliers and SiPMs. The finished products of Gaussian shaping amplifiers are available in eight types with different shaping times.

• Amplifier
• Radiation detector

We offer a range of products that can measure strong magnetic fields exceeding 20 T with high precision of 10 ppb, comparable to "international metrological standards." At Metrolab, we provide the following products: ◆ NMR Magnetometers - PT2026 NMR High-Precision Teslameter - MFC2046 Field Camera ◆ Fluxmeters - FDI2056 High-Speed Digital Integrator ◆ 3-Axis Magnetometers - THM1176 Hall Magnetometer - TFM1186 Fluxgate Magnetometer - HMC9076 Hall Field Camera - MagVector MV2 3-Axis Magnetic Sensor Element ◆ Reference Magnets - PM1055 Palm-Sized Reference Magnet

• Magnetic field analysis/electromagnetic wave analysis
• Other measurement, recording and measuring instruments
• Testing Equipment and Devices

1. PT2026 NMR High-Precision Tesla Meter "Accurate and high-precision magnetometer" Features - NMR (Nuclear Magnetic Resonance): Accurate and high-precision magnetic field measurement technology - Probe measurement range: Supports both 1.5T and 3T with a single probe - High measurement rate: Up to 33 Hz - Upgradeable to Field Camera MFC2046 2. THM1176, TFM1186 Compact 3-Axis Magnetometer "Portable and capable of measuring various things" Features - Simultaneous measurement of magnetic field strength in X, Y, and Z axes - THM1176: Hall magnetometer - TFM1186: Fluxgate magnetometer - Connects to desktop PCs, laptops, and handheld PCs

• Magnetic field analysis/electromagnetic wave analysis
• Other electric meters
• Testing Equipment and Devices

When trying to incorporate a sophisticated magnetometer into individual electronic devices, the MV2 is an ideal choice. It is also used in various products from Metrolab for magnetic field measurement, and a system has been established for electronic device designers to utilize MV2 technology. ■ Output signals (Bx, By, Bz) can be obtained in analog or digital form. ■ A board that operates with Arduino equipped with MV2 is also available for sale as the "MV2 Evaluation Kit."

• Sensors
• Other measurement, recording and measuring instruments
• Magnetic field analysis/electromagnetic wave analysis

The T560 series is a family of compact digital delay generators designed for embedded applications in OEM settings. ◆ TTL level delay output × 4 channels Each channel's delay time and pulse width can be set individually ◆ Delay time and pulse width can be set in 10ps increments Configurable up to a maximum of 10 seconds ◆ Input/output delay (insertion delay): 21ns Maximum trigger rate: 16MHz ◆ High-precision phase-locked system with low jitter Maintains delay accuracy with a crystal clock Eliminates uncertainty due to external errors ◆ Time base from an internal crystal oscillator Ability to synchronize with an external clock ◆ DDS synthesizer for internal trigger rate ◆ Operates with a standard +12V single power supply ◆ Equipped with a standard RS-232 serial interface Ethernet option also available ◆ Custom versions available for OEM packages or internal boards only

• Signal Generator

Up to 8 types of event times can be recorded. It is a multi-event time digitizer (TDC) with 80 ps per time bin and no dead time. **Features** - It can detect pulse widths with an accuracy of 80 ps and calculate the area and height of the detector's pulses. - It can detect overlapping multiple events. - The state changes of STOP events can be evaluated at a rate of 12.5 GHz. - It achieves a constant throughput of 240 MB/s with a USB 3.0 interface. - An optional oven-stabilized clock for stable oscillation is also available.

• Time-frequency measurements
• Other electric meters

This is a tabletop digital delay and pulse generator. It allows for individual delay and pulse width settings for 4 channels. It can generate delays of up to 1000 seconds in 1 ps steps and can operate at a high repetition rate of 10 MHz. 【Features】 ■ 4-channel delay and pulse width output ■ 1 ps resolution ■ Delay time settings of up to 1000 seconds ■ 25 ns input/output delay, etc. *For more details, please download the PDF or contact us.

• Time-frequency measurements
• Signal Generator