大栄無線電機 Product Lineup

◆T560 Delay/Pulse Generator - Delay time and pulse width can be specified individually for 4 channels, with settings possible in 10ps increments up to a maximum of 10 seconds. - Input/output delay (insertion delay): 21ns - Maximum trigger rate: 16MHz ◆MCS8A Multi-Stop TDC/TOF - An 8-input digitizer capable of recording multiple event times. - The time difference between START and STOP can be detected with a resolution of 80ps for up to 8.3 days. - STOP can be detected on the rising edge, falling edge, or both edges. - The threshold levels for START and STOP can be set in 1mV increments within the range of -1 to +1.5V. - A multi-event time digitizer with 80ps per time bin and no dead time. ◆MPA4T Combined TDC/TOF and Multi-Parameter MPA - A 5-input digitizer derived from the MCS8A, with 100ps per time bin. - Equipped with an 8-channel ADC input port, functioning as a multi-parameter data acquisition system (MPA). ⇒ Operates as a high-speed list mode system. ⇒ Each ADC input can also connect to multi-scalers or TOF devices.

Up to 8 types of event times can be recorded. It is a multi-event time digitizer (TDC) with 80 ps per time bin and no dead time. **Features** - It can detect pulse widths with an accuracy of 80 ps and calculate the area and height of the detector's pulses. - It can detect overlapping multiple events. - The state changes of STOP events can be evaluated at a rate of 12.5 GHz. - It achieves a constant throughput of 240 MB/s with a USB 3.0 interface. - An optional oven-stabilized clock for stable oscillation is also available.

In PHA mode, it continuously collects data from 4 channels with a 16-bit ADC every 8 ns, achieving a resolution of 32k. It is equipped with a pole-zero filter and trapezoidal wave shaping, allowing it to process typical preamplifier signals. In MCS mode, it processes the input signals for Start, Stop1, Stop2, and CHADV using the four BNC connectors on the right side. It can store up to 16Mbin of spectra in internal memory.