Nishimura Works Co., Ltd. Product Lineup

The CD dryer is a conduction heating type liquid dryer that dries by indirectly heating liquids through heat conduction from a heat source. The features of the CD dryer include the following: - High performance: The liquid sprayed onto the disk surface forms a thin film, which enhances conductivity and increases processing capacity per unit heat transfer area. Additionally, the dried material on the heat transfer surface is constantly scraped off by a scraper, ensuring stable high processing capacity. - Compact: By using the thin disk's good properties as the heat transfer surface, a large heat transfer area can be secured within a compact space. *Compared to a double dryer, the installation area is about 40% smaller. - Energy-saving and high efficiency: The compact design minimizes heat loss, achieving a high energy efficiency of 80-85%. - Speedy: The heat capacity of the disks in the heat transfer section is small, allowing even large machines to operate approximately 5 minutes after steam input. - Process reduction: Since it can dry from liquid to powder, significant reductions in upstream and downstream processes such as concentration and pulverization are possible. *For more details, please download the PDF of the catalog that includes usage examples and case studies, or contact us.

Nishimura Works' A-VCD Dryer is a liquid dryer that can dry and concentrate under various conditions according to customer needs. High-temperature drying with source heat up to 170°C. Low-temperature drying and concentration with source heat as low as 60°C is also possible. Low-temperature drying improves the quality of dried products by preventing oxidation and thermal denaturation. Optional inert gas atmosphere can prevent oxidation and reactions with water, enhance explosion prevention, and further improve quality. 【Features】 ■ Continuous low-temperature drying and concentration ■ Optional inert gas atmosphere prevents oxidation and reactions with water, enhances explosion prevention, and further improves quality ■ Can utilize hot water above 60°C as a heat source ■ Capable of drying and concentration with heating steam pressure up to 0.8MPa (170°C) ■ Energy-saving and space-saving ■ Solvent recovery *For more details, please refer to the catalog or feel free to contact us.

Nishimura Works' A-VCD Dryer is a liquid dryer that can dry and concentrate under various conditions according to customer needs. High-temperature drying with source heat up to 170°C. Low-temperature drying and concentration with source heat as low as 60°C is also possible. Low-temperature drying improves the quality of dried products by preventing oxidation and thermal denaturation. Optional inert gas atmosphere can prevent oxidation and reactions with water, enhance explosion prevention, and further improve quality. 【Features】 ■ Continuous low-temperature drying and concentration possible ■ Optional inert gas atmosphere prevents oxidation and reactions with water, enhances explosion prevention, and further improves quality ■ Can utilize hot water above 60°C as a heat source ■ Capable of drying and concentrating with heating steam pressure up to 0.8 MPa (170°C) ■ Energy-saving and space-saving ■ Solvent recovery *For more details, please refer to the catalog or feel free to contact us.

Nishimura Works' A-VCD Dryer is a liquid dryer that can dry and concentrate under various conditions according to customer needs. High-temperature drying with source heat up to 170°C. Low-temperature drying and concentration with source heat as low as 60°C is also possible. Low-temperature drying improves the quality of dried products by preventing oxidation and thermal denaturation. Optional inert gas atmosphere can prevent oxidation and reactions with water, enhance explosion prevention, and further improve quality. 【Features】 ■ Continuous low-temperature drying and concentration ■ Optional inert gas atmosphere prevents oxidation and reactions with water, enhances explosion prevention, and further improves quality ■ Can utilize hot water above 60°C as a heat source ■ Capable of drying and concentration with heating steam pressure up to 0.8MPa (170°C) ■ Energy-saving and space-saving *For more details, please refer to the catalog or feel free to contact us.

The CD dryer is a conduction heating type dryer that indirectly heats and dries materials through heat conduction from a heat source. By using both sides of a hollow circular plate as heat transfer surfaces, it achieves twice the performance per square meter compared to drum-type dryers. Compared to spray-type dryers, it is compact, being 1/5 to 1/20 the size, with minimal heat loss, allowing for energy-efficient operation with over 80% efficiency.

The CD dryer is a conduction heating type dryer that indirectly heats and dries materials through heat conduction from a heat source. By using both sides of a hollow disc as heat transfer surfaces, it achieves twice the performance per square meter compared to drum-type dryers. With a compact design that minimizes heat loss, it enables energy-efficient operation with over 80% efficiency.

The CD dryer is a conduction heating type dryer that indirectly heats and dries materials through heat conduction from a heat source, operating on the same principle as this machine. 【Features】 - High Performance Compared to conventional drum dryers (manufactured by our company), the capacity per square meter in over 50 experimental data is, on average, doubled despite using low-pressure steam. - Energy Saving, High Efficiency Conduction heating type dryers generally have high thermal efficiency, and this machine, being compact, further reduces heat loss, allowing operation at a high efficiency of 80-85%. Additionally, due to the lightweight heating elements, even large models can start operating about five minutes after steam is introduced. - Minimal Thermal Transformation of the Material Being Dried With a drying time of just 3 to 30 seconds, the damage to the material being dried due to temperature can be minimized. - Process Simplification Since it can dry from liquid to powder in one go, it significantly reduces the preceding and following processes. There are cases where the three processes of concentration, drying, and pulverization have been shortened to one process by this machine. *For more details, please download the PDF or contact us.

The CD dryer is a conduction heating type liquid dryer that indirectly heats liquids through heat conduction from a heat source to perform drying. Compared to conventional drum dryers, it has about twice the performance while occupying less space. 【Features】 - High Performance The liquid sprayed onto the disk surface forms a thin film, which dries and concentrates effectively due to excellent conductivity, resulting in high processing capacity per unit heat transfer area. Additionally, the dried material on the heat transfer surface is constantly scraped off by a scraper, ensuring stable high processing capacity. - Compact By using the thin disk as the heat transfer surface, a large heat transfer area can be secured within a compact space. *Compared to double dryers, the installation area is about 40% smaller. - Energy Saving, High Efficiency The compact design minimizes heat loss, achieving a high energy efficiency of 80-85%. - Speedy The heat capacity of the disks in the heat transfer section is small, allowing even large machines to operate approximately 5 minutes after steam input. - Process Reduction It can dry from liquid to powder, significantly reducing the need for upstream and downstream processes such as concentration and grinding. *For more details, please download the PDF catalog featuring usage examples and case studies, or contact us.

At Nishimura Works, we now offer the electrically heated type 'E-CD Dryer.' It uses no fossil fuels and is powered by clean energy. It achieves high performance while being energy-efficient and space-saving. We can accommodate your needs. Please feel free to contact us. 【Features】 ■ Electrically heated ■ No fossil fuels used ■ Clean energy ■ High performance ■ Energy-efficient ■ Space-saving *For more details, please refer to the PDF document or feel free to contact us.

The CD Dryer is a conduction-heating type liquid dryer. It dries liquids through heat conduction from a heat source. It offers about twice the processing capacity of conventional drum dryers while taking up less space. ‥Features‥ - High Performance The liquid fed onto the surface of the disk forms a thin film, which concentrates/dries effectively due to excellent conductivity. This results in a high processing capacity per unit of heat transfer area. Additionally, dried material on the heat transfer surface is constantly scraped off by a scraper, ensuring stable high processing capacity. - Compact By using both sides of its thin disks as heat transfer surfaces, a large heat transfer area can be secured within a compact space. *Compared to double drum dryers, the installation area is about 40% smaller. - Energy Saving, High Efficiency The compact design minimizes heat loss, achieving a high energy efficiency of 80-85%. - Speedy The heat capacity of the disk in the heat transfer section is small, allowing even large machines to operate in about 5 minutes after steam input. - Process Reduction The CD Dryer dries liquid to powder, making significant reductions in upstream and downstream processes, such as concentration and grinding, possible. *For more details, please download the PDF catalog featuring usage examples and case studies, or contact us.*

Our original products, including the CD dryer, Ivy conveyor, and various plants, currently hold 7 domestic patents, 5 overseas trademarks, and 3 domestic trademarks. We have 2 domestic patent applications pending and have exported to over a dozen countries, receiving high praise from both domestic and international markets. Machines that are active worldwide are being created in Saga. The innovative power of Nishimura Iron Works is contributing to the future of Japan and the world. We will continue to create products that are useful for the modernization and rationalization of the industrial sector through creativity and technology. 【Products Offered】 ■ CD Dryer ■ A-VCD Dryer ■ H-VCD Dryer ■ BD Dryer ■ IB Conveyor *For more details, please refer to the PDF document or feel free to contact us.

A new A-VCD test machine, which uses thermal oil as its heat source the has been completed. A variant of our standard liquid dryer, the CD Dryer, which boasts over 500 units delivered, is now compatible with a new heat source (thermal oil). Compared to the standard CD Dryer, which uses steam as it heat source, this dryer does not require the installation of a steam boiler and is not subject to pressure vessel structural standards. With the completion of this test machine, testing can be done with a choice of four heat sources: thermal oil, electric heat, hot water, and steam. Test drying of liquid samples is available through our drying test facility. 【Features】 - No need for to install a steam boiler, and the dryer is not subject to pressure vessel structural standards. - Choose from four heat source selections: thermal oil, electric heat, hot water, and steam. - We can conduct drying tests using your liquid sample. - Utilization for the recovery of resources from organic solvent slurries has also begun. - Processing capacity tests for model selection can be conducted with 40 liters of sample liquid.