朝日測器 List of Products and Services

The next-generation inspection device "IMAGE8000.DHV," equipped with a digital processor, is a surface inspection system designed for plain sheet products compatible with digital cameras. By adopting high-speed, high-resolution cameras, the resolution in the flow direction has improved, enabling more precise defect detection. The use of optical transmission for connections allows the distance from the camera to the signal processing unit to be extended up to 200 meters, making it possible to separate the installation of the field environment from the signal processing equipment. Compared to conventional analog inspection systems, both installation and maintenance costs are expected to be reduced. *Custom specifications, such as marking devices (label markers/pen markers) and slit compatibility, can also be customized. Please contact us for more details. 【Features】 ■ Up to 12 cameras can be connected to a single signal processing unit. ■ Up to 6 evaluation parameters can be set per camera. ■ Energy efficiency is improved due to low voltage and low current from digitization. *For more details, please contact us or download the catalog for further information.

• Image Processing Equipment

The IMAGE8000.DHV is a high-speed CCD camera system equipped with an 80/160MHz (1:1) camera. It uses a fiber optic camera link extender method, allowing a single fiber optic cable to connect the detector (four cameras) to the signal processing unit. (The maximum length of the fiber optic cable can be up to 200m.) 【Features】 ○ Surface inspection device for plain sheet-shaped products ○ Up to 12 cameras can be connected to one signal processing unit. ○ Connected cameras can be grouped into multiple configurations (front/back or transmission/reflection, etc.) depending on the equipment configuration and installation conditions. ○ The connection distance between the cameras and the signal processing unit can be extended up to 200m. ○ High-speed/high-resolution digital cameras can be used. ○ The use of high-speed cameras improves the resolution in the flow direction, enabling more precise defect detection. ○ Equipped with gradation comparison processing, point, area, line, and three-line parallel pipeline arithmetic processing, and two-dimensional digital computation functions. ○ Up to six evaluation parameters can be set per camera. ○ Custom specifications, such as marking devices (label markers/pen markers) and slit compatibility, can also be customized. *Please consult us.

• Image Processing Equipment

The surface inspection device "IMAGE8000.DHV" is a system equipped with a high-speed CCD camera operating at 80/160MHz (1:1). It uses a fiber optic camera link extender method, allowing connection between the detector (four cameras) and signal processing with a single fiber optic cable (with a maximum cable length of 200m). 【Features】 ■ Camera Link Extender The fiber optic camera link image transfer unit can transmit images from four Base Configuration cameras using a single fiber optic cable. ■ Digital High-Function Calculation ■ Camera signal extension up to 200m ■ Defect Evaluation Parameters ■ Real-Time Display Function ■ Variety Registration ■ Calibration Mode *For more details, please download the catalog or contact us.

• Image Processing Equipment
• Other surface treatment equipment

We are currently offering a test unit of a compact and high-speed marker developed for marking defect locations on inspection devices. Why not take this opportunity to conduct an evaluation test?

• Other markings

The IMAGE7000.PE resin pellet foreign matter inspection device is an inspection system that detects and removes foreign substances mixed into resin pellets quickly and with high precision. By combining the high-speed image processing technology from surface inspection equipment manufacturer ASAHISOKKI with the vibration transport technology of powder and granular foreign matter inspection devices, and adding newly developed aligned transport technology, we have completed a high-speed, high-precision resin pellet inspection device. For more details, please contact us or refer to the catalog.

• Image Processing Equipment

This is a defect-free marking unit that can be equipped with low-cost commercially available magic! ■ Sales of the "M-100S" with a width of 65mm began on October 1, 2011. ■ If you wish to use a marker specified by the customer, we will create a dedicated holder separately (optional). ■ We also have rental units available, so please let us know if needed. ■ Regarding delivery times, we can deliver orders of 1 to 5 units in as little as 5 days. * For orders of more than 5 units, please inquire. ■ For more details, please download the catalog or contact us.

• Image Processing Equipment

This is an introduction to the pinhole inspection device APIS-4000F (B) handled by Asahi Seiki Co., Ltd.

• Image Processing Equipment

The comprehensive inspection device IMAGE2000 has achieved simplification and cost reduction of all functions through the computer network. Inspection signal processing + defect image processing + defect image filing + defect map report function are all integrated into one FA computer! The number of connectable cameras was limited to four with the old PCW, but with PCWII, it can now connect up to six cameras. This has improved the high resolution of wide sheets and the ability to accommodate multiple optical conditions. The speed of defect image acquisition has significantly improved, greatly enhancing the capture of discrete defect images. *For more details, please download the catalog.

• Image Processing Equipment

Surface inspection device equipped with a digital high-performance computing unit, enabling the detection of visually limited defects. ■□■Features■□■ ■ Exhibits inspection capabilities close to visual inspection through surface field inspection and 2D digital computing functions. ■ Developed as a high-precision high-speed inspection system by systematizing advanced technologies such as ultra-fast CCD cameras, dedicated lighting for different inspection items, high-speed digital computing chips, and computers. ■ Equipped with gradation comparison processing, point, image, line, and three-line parallel pipeline computing processing, and 2D digital computing functions. ■ Stable detection is possible with a three-dimensional evaluation method, allowing for simple sorting of defects through three modes of evaluation: density (level) sorting → width sorting → shape sorting. ■ For more details, please download the catalog or contact us.

• Visual Inspection Equipment

Inspection device for high-speed and high-precision detection and removal of foreign substances mixed into resin pellets ■□■Features■□■ ■ Newly developed high-speed image processing technology and vibration conveying technology for powder and granular foreign substance inspection, combined with alignment conveying technology, resulting in a high-speed and high-precision foreign substance inspection device for resin pellets. ■ Inspection of surface foreign substances and internal mixed foreign substances can be performed simultaneously using unique lighting and image processing technology. ■ Capable of inspecting transparent pellets. ■ With a unique alignment conveying method, it can inspect over 3 million pieces per hour in PEW type. ■ Easy operation with a Windows operator dialogue system and a variety registration function for 60 items. ■ For more details, please download the catalog or contact us.

• Image Processing Equipment

This is an introduction to the carbon dispersion measurement device handled by Asahi Measurement Co.

• Other measurement, recording and measuring instruments

A tension meter that measures the tension signal of the web during operation and outputs the tension signal externally along with a display.

• Other measurement, recording and measuring instruments

A tabletop inspection device that automatically performs visual inspections of powders such as acceptance inspections, lot sampling inspections, and development material evaluation inspections, ensuring quality assurance and lot evaluation.

• Image Processing Equipment

In the recycling of ear-shaped post-formed skeletons, a foreign matter inspection device is used to remove foreign substances within the crushed flakes to reduce the defect rate.

• Image Processing Equipment

This is an inspection device that detects and removes foreign substances mixed in powder or granular agents with high speed and precision. It is designed for practical operations such as acceptance inspections of pharmaceuticals, food additives, cosmetics, etc., featuring tool-free disassembly and assembly at points of contact with the agents, as well as a washable device structure. It is suitable for powder or granular agents that are white or light-colored (experimentation is required for colors other than white). ■ Two models can be selected based on processing capacity. You can choose between two models based on processing capacity: - PG2: 15 kg/h to 50 kg/h or - PG4: 30 kg/h to 100 kg/h A dedicated experimental device is available. We have a permanent setup for sample testing. *Customers wishing to conduct sample tests are welcome to contact us freely.

• Other inspection equipment and devices

This is a guide to the Asahi Measuring Instruments Company comprehensive catalog, which utilizes world-class technology to meet all needs in defect inspection. ■□■ Contents ■□■ ■ Various surface inspection devices ■ Small label markers ■ Pen markers ■ Various pinhole inspection devices ■ Powder and granular foreign matter inspection devices ■ Flake foreign matter inspection devices ■ Resin pellet foreign matter inspection devices ■ Contamination checkers ■ Tension meters (load cell type tension detectors) ■ Measurement and testing devices ■ For additional content, please download the catalog. For more details, please contact us.

• Image Processing Equipment

Marking unit developed for defect position marking of inspection devices and for roll paper end marks ■□■ Product Lineup ■□■ ■ Label Marker L-20 Model - Compact marking unit with a width of 100 mm - Can be multi-connected according to slitter width ■ Pen Marker M-100 Model - Defect position marking unit - Can be equipped with low-cost commercially available markers ■ For more details, please download the catalog or contact us.

• Image Processing Equipment