キリウスジャパン List of Products and Services

The "SNT-CS9 Series" is a twin-sensor servo driver for ultra-high torque applications. Different torques can be centrally managed with JOB. Tasks such as tightening various parts with different torques can be set as a series of operations in the JOB settings. We offer the "SNT-CSM940" with a rotation speed (r.p.m) of 20 to 390 and the "SNT-CSM960" with 20 to 250. Both models use a lever for the start method. 【Features】 ■ Torque transducer type ■ Equipped with angle encoder ■ DC servo motor ■ Process management with JOB ■ Error-proofing function *For more details, please download the PDF or feel free to contact us.

• driver

The "SNT-CSM1 Series" is a twin-sensor servo driver for micro-torque applications. It monitors the tightening process and graphs torque, angle, time, and rotational speed. You can check the tightening process with waveform diagrams. Since the data is saved, it is also possible to view past data. The product weighs 465g, has a total length of 210mm, and a power consumption of 90w. 【Features】 ■ Torque transducer type ■ Equipped with angle encoder ■ DC servo motor ■ Process management with JOB ■ Poka-yoke function *For more details, please download the PDF or feel free to contact us.

• driver

The "SNT-CSM7 series" is a high-torque twin-sensor servo driver. It records individual tightening data for the same parts. The serial numbers of each part are recorded during the tightening process using a barcode reader. The job switches with each change of parts. In addition to the lever/push compatible "SNT-CSM712" and "SNT-CSM718," we also offer the lever-type "SNT-CSM725." 【Features】 ■ Torque transducer type ■ Equipped with angle encoder ■ DC servo motor ■ Process management by JOB ■ Error-proofing function *For more details, please download the PDF or feel free to contact us.

• driver

The "SNT-CS5 Series" is a twin-sensor servo driver for medium torque applications. Tasks such as tightening at different torques in various locations can be set as a series of operations through job settings. We offer the "SNT-CS503" with a rotation speed of 20–1600 r.p.m, the "SNT-CS505" with 20–1100 r.p.m, and the "SNT-CS507" with 20–660 r.p.m. All models support both lever and push start methods. 【Features】 ■ Torque transducer type ■ Equipped with angle encoder ■ DC servo motor ■ Process management via job ■ Error-proofing function *For more details, please download the PDF or feel free to contact us.

• driver

The "SNT-CS3 Series" is a twin-sensor servo driver for low torque applications. You can check the tightening process with waveform diagrams, and since the data is saved, it is also possible to view past data. We offer the lever-start "SNT-CS301" and the lever/push compatible "SNT-CS302F" and "SNT-CS303." Please feel free to contact us when you need assistance. 【Features】 ■ Torque transducer type ■ Equipped with angle encoder ■ DC servo motor ■ Process management with JOB ■ Error-proofing function *For more details, please download the PDF or feel free to contact us.

• driver

We would like to introduce our twin sensor servo driver, 'SNT-CS & KL-NTCS'. Tightening torque and other parameters can be registered in a JOB. The tightening results and the part number can be recorded simultaneously, and the accuracy of detecting screw tightening defects is improved with the angle encoder. The JOB can be switched using "barcode," "Ethernet," or "I/O." Data management can be performed via Ethernet or USB memory. 【Features】 ■ Monitoring the tightening process by graphing torque, angle, time, and rotation speed ■ Centralized management of different torques within a JOB ■ Recording of tightening conditions ■ Contributing to screw tightening traceability with data log output functionality ■ Detecting the angle after load detection with the threshold function *For more details, please download the PDF or feel free to contact us.

• driver

In the electronic equipment manufacturing industry, there is a constant demand for improvements in product quality and productivity. Particularly in the assembly of small components and precise screw tightening tasks, reducing worker fatigue and ensuring accurate work are crucial. Manual screw tightening places a heavy burden on workers and is prone to quality issues due to variations in tightening torque. The vertical driver arm 'KP-AUX-TI-25' was developed to address these challenges. 【Usage Scenarios】 - Assembly lines for electronic devices - Repair and maintenance of precision instruments - Screw tightening tasks for small components 【Benefits of Implementation】 - Reduction of worker fatigue - Improvement in work efficiency - Shock absorption during fastening - Stabilization of vertical fastening - Stabilization of product quality

• driver

In the precision work of the electronic equipment manufacturing industry, the quality and efficiency of screw tightening operations are crucial. Particularly in the assembly of small components and work in tight spaces, accurate screw tightening and reducing the burden on workers are required. Improper screw tightening can lead to a decline in product quality and the occurrence of defective products, while the burden on workers increases the risk of decreased productivity and work-related injuries. The vertical driver arm 'KP-AUX-TL-25' addresses these challenges. 【Usage Scenarios】 - Assembly lines for electronic devices - Repair and maintenance of precision equipment - Screw tightening operations for small components 【Benefits of Implementation】 - Reduction of worker fatigue - Improvement in work efficiency - Shock absorption during fastening - Stabilization of vertical fastening - Stabilization of product quality

• driver

The "KFA-0850H" is a manual screw feeder of the escapement type. It can transport short screws and screws with thin heads (0.2mm or more). It detects the extraction of screws and outputs a signal. Additionally, the operation panel allows for fine adjustments suitable for screws, such as vibration strength, vibration time, and drum rotation time control. 【Features】 ■ High-lifespan brushless motor adopted ■ Signal output function included ■ Counting function included, enabling quantity confirmation ■ Unique transport method ■ Wide range of compatible screws ■ Various adjustment functions *For more details, please download the PDF or feel free to contact us.

• Screw

The "KFA-0850A" is a screw feeder of the escapement type for automatic machines. It uses a brushless motor for vibration, rotation, and disc motors, significantly improving durability. Additionally, it allows for the setting of the count number, and you can check the number of screws taken out on the LED screen. It will notify you with a buzzer sound. 【Features】 ■ High-lifespan brushless motor ■ Signal output function ■ Counting function for verifying the number of screws ■ Unique transport method ■ Wide range of compatible screws ■ Various adjustment functions *For more details, please download the PDF or feel free to contact us.

• Screw

We would like to introduce our vertical driver arm 'KP-AUX-TL-25'. It adapts to a wide range of tools through balancer adjustments. It absorbs shocks during torque increases, reducing the burden on the operator. Additionally, it is compatible with small to medium electric screwdrivers. Please feel free to contact us when you need assistance. 【Features】 ■ Compatible with small to medium electric screwdrivers ■ Absorbs shocks during torque increases, reducing the burden on the operator ■ Adapts to a wide range of tools through balancer adjustments *For more details, please download the PDF or feel free to contact us.

• driver

We would like to introduce our vertical driver arm, 'KP-AUX-TI-25'. It is compatible with small to medium electric drivers. It absorbs shocks during torque increases, reducing the burden on the operator. Additionally, it can adapt to a wide range of tools through balancer adjustments. Please feel free to contact us when you need assistance. 【Features】 ■ Compatible with small to medium electric drivers ■ Absorbs shocks during torque increases, reducing the burden on the operator ■ Adapts to a wide range of tools through balancer adjustments *For more details, please download the PDF or feel free to contact us.

• driver

The "KP-AUXA-2" is a driver arm that can accommodate a wide working range. We also provide gas springs and clamp shapes tailored to this product. It absorbs shocks during tightening, allowing you to work without worrying about the reaction force of the driver. Please feel free to contact us when you need assistance. 【Specifications (excerpt)】 ■ Function: Vertical tightening ■ Compatible drivers: BK-960/9120 ■ Movement range (mm): 50–830 ■ Body weight (Kg): 8 ■ Supported load (Kg): 1.0–1.6 *For more details, please download the PDF or feel free to contact us.

• driver

The "KP-AUXA-500" is a driver arm that can accommodate a wide working range. It absorbs shocks during tightening, allowing work to be carried out without worrying about the reaction force of the driver. Gas springs and clamp shapes tailored to this product are also available. Please feel free to contact us when you need assistance. 【Specifications (excerpt)】 ■ Function: Vertical tightening ■ Compatible drivers: RBK-350/500 ■ Movement range (mm): 50–830 ■ Body weight (Kg): 8 ■ Supported load (Kg): 2.3–2.9 *For more details, please download the PDF or feel free to contact us.

• driver

The "KP-AUX-TI-600N" is a driver arm with a movable range of R245 to 745mm. It absorbs shocks during tightening, allowing work to be carried out without worrying about the reaction force of the driver. The tool balancer enables balance adjustment according to the weight of the tool. Please feel free to contact us when you need assistance. 【Specifications (excerpt)】 ■ Applicable tool weight: 0.4 to 2.4kg ■ Movable range: R245 to 745mm ■ Durable torque: 25N·m ■ Vertical movable range: 535mm ■ Secondary arm stroke: 275mm *For more details, please download the PDF or feel free to contact us.

• driver

The "KP-AUX-TI-300N" is a driver arm that allows for easy vertical movement. With the tool balancer, balance adjustments can be made according to the tool weight. It absorbs shocks during tightening, allowing work to be done without worrying about the reaction force of the driver. Please feel free to contact us when you need assistance. 【Specifications (excerpt)】 ■Applicable tool weight: 0.5 to 2.8 kg ■Movement range: R180 to 560 mm ■Durable torque: 15 N·m ■Vertical movement range: 453 mm ■Secondary arm stroke: 210 mm *For more details, please download the PDF or feel free to contact us.

• driver

The "KP-AUX-TL-700N" is a driver arm that allows smooth lateral movement due to its multi-joint design. It absorbs shocks during tightening, enabling work to be carried out without worrying about the reaction force of the driver. The tool balancer allows for flexible settings according to the weight of the tool. Please feel free to contact us when you need assistance. 【Specifications (excerpt)】 ■Applicable tool weight: 1.4 to 3.4 kg ■Movement range: R80 to 755 mm ■Durable torque: 25 N·m ■Vertical movement range: 533 mm ■External dimensions: H927 mm x W795 mm *For more details, please download the PDF or feel free to contact us.

• driver

The "KP-AUX-TL-450N" is a driver arm that allows for smooth lateral movement due to its multi-joint design. With the tool balancer, flexible settings can be made according to the weight of the tool. It absorbs shocks during tightening, allowing work to be done without worrying about the reaction force of the driver. Please feel free to contact us when you need assistance. 【Specifications (excerpt)】 ■Applicable tool weight: 0.8 to 2.8 kg ■Range of motion: R80 to 514 mm ■Durable torque: 15 N·m ■Vertical range of motion: 453 mm ■External dimensions: H817 mm x W570 mm *For more details, please download the PDF or feel free to contact us.

• driver

The "KFA-2060H" is an escapement-type screw feeder that detects the extraction of screws and outputs a signal. With the operation panel, fine adjustments suitable for screws can be made, including vibration strength, vibration time, and drum rotation time control. Due to its large capacity, it can transport a significant number of screws: - M3×10: approximately 2000 pieces - M4×10: approximately 1200 pieces - M5×10: approximately 650 pieces It can also transport screws with a short overall length or thin head thickness (0.2mm or more). 【Features】 ■ High-lifespan brushless motor adopted ■ Signal output function equipped ■ Counting function included, allowing for quantity verification ■ Compatible with M3 to M6, large capacity type ■ Wide range of compatible screws ■ Various adjustment functions *For more details, please download the PDF or feel free to contact us.

• others

The "KFA-2060A" is a screw feeding machine of the escapement type that employs a brushless motor for vibration, rotation, and disc motors. It allows for the setting of the count number, confirms the number of items taken out on an LED screen, and notifies with a buzzer sound. Due to its large capacity, it can transport many screws: - M3×10: approximately 2000 pieces - M4×10: approximately 1200 pieces - M5×10: approximately 650 pieces It can also transport screws with a short overall length or those with a thin head (0.2mm or more). 【Features】 ■ High-lifespan brushless motor adopted ■ Signal output function equipped ■ Counting function included, allowing for quantity confirmation ■ Compatible with M3 to M6, large capacity type ■ Wide range of compatible screws ■ Various adjustment functions *For more details, please download the PDF or feel free to contact us.

• others

The "KTM-50S" is a dedicated model of the HS series cushion clutch electric screwdriver. It measures the torque of a semi-auto type screwdriver. Additionally, it can be used anywhere and is convenient for carrying to job sites. A dedicated charger is also included. 【Features (excerpt)】 ■ Average value calculation ■ Pass/fail judgment ■ Auto power off ■ USB output ■ Auto zero clear *For more details, please download the PDF or feel free to contact us.

• Torque Meter

The "KL-TCC/SGT-CC" is an advanced electric screwdriver with a current control system equipped with an angle encoder. It starts measuring the angle when a certain torque is applied, achieving high accuracy in detecting tightening failures. Tightening torque and other parameters can be registered in a JOB, and part numbers can be recorded simultaneously with the tightening results. Additionally, variables such as torque and rotation speed can be switched using "barcode," "dedicated software," or "Ethernet." 【Features】 ■ Process management with 15 JOBs ■ Diverse torque settings with a single unit ■ Torque conversion value display ■ Poka-yoke function, data log output ■ Management software included, allowing viewing and comparison of torque waveform diagrams within the software 【Other high torque compatible related products】 ■ Smart servo driver SKT-CG series → Output torque (Nm) is available from 0.1 to 25, and it has a built-in torque sensor. Torque controller KL-TCG https://www.ipros.jp/product/detail/2000593034/ *For more details, please refer to the PDF document or feel free to contact us.

• driver

The "KL-TCC/SGT-CC" is an advanced electric screwdriver with a current control system equipped with an angle encoder. It starts measuring the angle when a certain torque is applied, enabling highly accurate detection of tightening failures. Tightening torque and other parameters can be registered in a JOB, and part numbers can be recorded simultaneously with the tightening results. Additionally, variables such as torque and rotation speed can be switched using "barcode," "dedicated software," or "Ethernet." 【Features】 ■ Process management with 15 JOBs ■ Diverse torque settings with a single unit ■ Torque conversion value display ■ Error-proofing function ■ Management software included *For more details, please refer to the PDF materials or feel free to contact us.

• driver

The "HBA-6000 Series" is an electric screwdriver equipped with a brushless motor featuring low power consumption and a quiet design, with lever start and push start options. It requires no carbon brush replacement, making maintenance easy. The motor comes with a three-year warranty and has low running costs. Additionally, the brushless motor significantly improves durability, making it economical for long-term use. 【Features】 ■ AC transformerless (brushless) ■ Equipped with a brushless motor ■ High output ■ Low running costs ■ Reduced environmental impact ■ Standard torque fixing ring *For more details, please refer to the PDF document or feel free to contact us.

• driver

The "HBA-5000 Series" is an electric screwdriver equipped with a lever start and push start brushless motor. It can be directly connected to an outlet, making it easy to change lines and handle. Two models are available: a medium torque high-speed rotation type and a high torque type. Additionally, by attaching the "torque fixing ring," the screwdriver with a set torque is protected from external impacts, safeguarding the torque setting. 【Features】 ■ AC transformer-less (brushless) ■ Equipped with a brushless motor ■ High output ■ Low running costs ■ Reduced environmental impact ■ Torque fixing ring standard equipment *For more details, please refer to the PDF materials or feel free to contact us.

• driver

The "KTM Series" allows for torque checks on electric screwdrivers, torque wrenches, and torque drivers, and can also be used for torque management. It is a torque measuring device that can determine the pass/fail status of measurements based on upper and lower limit settings. Inspection reports, calibration certificates, and traceability diagrams are issued for all products, and calibration support is also available. The "KTM-150" displays the maximum, minimum, and average values of expected values up to 30 data points, and data output is also possible. With a separately sold measuring joint, torque measurements can be performed in the range of "5-15 N·m." Additionally, the small torque measuring device "KTM-15" can measure minimum torque down to 0.20 cN·m, and tools for measuring extremely small torque are also available. The high torque measuring device "KTM-250" supports high torque up to a maximum of 25 N·m. 【Features】 <KTM-6/KTM-15/KTM-150> ■ Pass/fail determination of measurements is possible with upper and lower limit settings. ■ Battery-operated for convenient portability. <KTM-250> ■ Suitable for moment management of various components during continuous work. ■ Pass/fail determination of measurements is possible with upper and lower limit settings. *For more details, please refer to the PDF document or feel free to contact us.

• Torque Meter

The "Smart Servo Driver" allows you to set the number of rotations, rotation speed, and direction (forward/reverse) on the controller side. It can perform torque differentiation with a single unit, achieving precise tightening torque through a torque sensor. Tightening Steps: Maximum registration of 250 Tightening Programs: Maximum registration of 99 Job Sequences: Maximum registration of 50 With the included "N-DAS" application, various settings and data management are possible. It can continuously execute a series of operations such as preventing biting and loosening and re-tightening after tightening. Additionally, a barcode reader records the serial numbers of individual parts during the screw tightening process, and the job switches with each change of part. 【Features】 ■ Equipped with a DC servo motor ■ Built-in torque sensor ■ Data log output ■ Screw counter (compatible with automated machines) ■ Management software included *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools
• driver
• Torque Control

The "Smart Servo Driver" allows you to set the number of rotations, rotation speed, and direction (forward/reverse) from the controller side. It can perform torque differentiation with a single unit, achieving precise tightening torque through a torque sensor. Tightening Steps: Maximum registration of 250 Tightening Programs: Maximum registration of 99 Job Sequences: Maximum registration of 50 With the included "N-DAS" application, various settings and data management are possible. It can continuously execute a series of operations such as preventing biting and loosening after tightening to re-tighten. Additionally, a barcode reader records the serial numbers of individual parts during the screw tightening process, and the job switches with each change of part. 【Features】 ■ Equipped with a DC servo motor ■ Built-in torque sensor ■ Data log output ■ Screw counter (compatible with automatic machines) ■ Management software included *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools
• driver
• Torque Control

The "Smart Servo Driver" allows you to set the number of rotations, rotation speed, and forward/reverse direction on the controller side. It can perform torque differentiation with a single unit, achieving precise tightening torque through a torque sensor. Tightening steps: Maximum registration of 250 Tightening programs: Maximum registration of 99 Job sequences: Maximum registration of 50 With the included "N-DAS" application, various settings and data management are possible. It can continuously execute a series of operations such as preventing biting and loosening and re-tightening after tightening. Additionally, the barcode reader records the serial numbers of individual parts during the screwing process, and the job switches each time the part changes. 【Features】 ■ Equipped with a DC servo motor ■ Built-in torque sensor ■ Data log output ■ Screw counter (compatible with automatic machines) ■ Management software included *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools
• driver
• Torque Control

We would like to introduce the "Driver Arms and Accessories" that we handle. Starting with the "KP-AUX-C50/E50/B50/D50," which eliminates the impact of the driver and allows for safe work, we also offer the "CARM-01," which is very easy to handle due to its carbon material. In addition, we have the signal control box "KL-SCBSN" compatible with automatic machines, as well as screw dishes "KB-1/KB-2/KB-3." 【Product Lineup (Partial)】 ■ Flexible Driver Arm KP-AUX-C50/E50/B50/D50 ■ Flexible Carbon Arm CARM-01 ■ Suspension Rack KH-1,2,3,5,6,7 ■ Pistol Grip for Lever & Push Start ■ Signal Control Box KL-SCBSN *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools
• Work tools
• driver

Introducing the "Driver Arm," which supports safe and precise work. We offer a lineup starting with the "KP-AUX-JS," compatible with small to medium electric screwdrivers, the "KP-AUX-TL-450," which allows for smooth lateral movement due to its multi-joint design, and the "KP-AUXA," suitable for ultra-high torque tools. Additionally, we have the "KP-AUX-TI-300," which is ideal for compact work. 【Features】 ＜KP-AUX-JS＞ ■ Absorbs shocks during torque increase, reducing the burden on the operator ■ Two types of variable driver holders available, adaptable to various tools ■ The driver attachment part (holder stay) can rotate 360°, eliminating the need to change the driver ■ Auto-return mechanism ensures work space is secured when the driver is not in use *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools
• Work tools
• driver

The "NejiDas BSF-1450" is a screw feeding machine that allows for stepless adjustment from M1.4 to M5.0. It reliably supplies screws using a rotating drum and a horizontal vibrating rail, preventing clogging of the rail due to debris. Additionally, we offer automatic machine compatible models such as the "KFA-2060 (compatible with M3 to M6 with a neck length of 29mm)" and the "KFA-0850 (M2.0 to M5)" in our lineup. 【Features】 <BSF-1450> ■ Freely adjustable from M1.4 to M5.0 ■ Reliable transport with a rotating drum and horizontal vibrating rail ■ Prevents rail clogging due to debris ■ Adjustable vibration strength ■ Adjustable vibration and drum rotation time *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools
• Work tools

The "HS-200 Series" is an electric screwdriver that achieves a low price by excluding the auto-stop feature. It features a free-spinning clutch, so there is no worry about over-tightening. It is a cordless type that can be used immediately by plugging it directly into a power source, making it easy to move and set up. Additionally, we also offer torque management measuring devices for electric screwdrivers, such as the "KTM-6/KTM-15/KTM-150." 【Features】 <HS-200 Series> ■ Free-spinning clutch eliminates worries about over-tightening ■ Being electric means there is no concern about torque variation due to changes in air pressure ■ Added a high-speed type "HS-228LF" to the lineup ■ Torque adjustment is stepless, allowing for fine settings ■ Torque fixing ring is standard equipment *For more details, please refer to the PDF document or feel free to contact us.

• driver
• Power tools
• Torque Meter

The "HBA Series" is an electric screwdriver equipped with a brushless motor that can be directly connected to an outlet, making it easy to change lines and handle. It has significantly improved durability, allowing for long-term use and economic efficiency. We offer two models: a medium torque high-speed rotation type and a high torque type. Additionally, we also handle the AC transformer-less (brushed) electric screwdriver "HFA Series." 【Features】 <HBA Series> ■ AC transformer-less (brushless) ■ High output ■ No need to replace carbon brushes, making maintenance easy ■ Motor comes with a 3-year warranty ■ Low power consumption, quiet design *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools
• driver
• Power tools

The "SKD-B2000/5000" is a brushless electric screwdriver that comes standard with a dedicated compact power supply. It allows for stable output torque while preventing issues caused by motor heat. Since there are no carbon particle emissions, it maintains a clean environment. Additionally, we also offer the standard type brushed DC electric screwdriver "HFD series," which balances low quality and cost. 【Features】 <SKD-B2000/5000> ■ Stable torque accuracy ■ Reduces maintenance costs ■ SKD-B2010L: Output torque of 0.98Nm, with a body weight of only 285 grams, compatible with M3 ■ Low noise and low sound, reducing environmental impact *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools
• driver
• Power tools

The "BN Series" is an electric screwdriver compatible with automatic machines, equipped with a brushless motor. It achieves significant output improvement and miniaturization compared to conventional models. The combination of the BN driver, control box, and dedicated power supply allows for "slow start" and "signal output management." Additionally, we also offer the "BN-M Series," which comes with a hold spot for automatic machine installation. 【Features】 ■ Equipped with a brushless motor - Significantly improved durability compared to conventional models - Economical for long-term use ■ Achieves significant output improvement and miniaturization compared to conventional models ■ Soft grip design reduces fatigue *For more details, please refer to the PDF materials or feel free to contact us.

• Other work tools
• driver
• Power tools

The "HFB-100 Series" is an electric screwdriver equipped with a brushless motor, weighing only 170g. Its lightweight design reduces fatigue during work. It has achieved significant miniaturization compared to conventional electric screwdrivers. Additionally, we offer ultra-compact special-purpose drivers, "SKD-B100LZ Series" and "SKD-B123KLM," which can reach areas with limited space. 【Features】 ■ Ultra-compact electric screwdriver suitable for extremely small screws ■ Lightweight design reduces fatigue during work ■ Ultra-compact controller with a total length of 165mm effectively utilizes workspace ■ Rotation speed can be easily switched using the controller's "HI/LO" switch ■ Options available for drivers tailored to extremely small screws with low rotation speeds of "HI 280/LO 200" *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools
• driver
• Power tools

The "HFB-BE200/500/800" is an electric screwdriver with a built-in counter that allows you to set the automatic reversal time after seating and adjust the floating condition of the screws. Using channel memory, it is also possible to manage the number of re-tightening after positioning. It counts the number of torque increases, and when it reaches the set number of screw tightenings, it notifies you with a lamp and a buzzer. Additionally, the screwdriver's operation stop function prevents the operator from continuing work without noticing any issues. 【Features】 ■ Driver operation stop function in case of NG (No Good) ■ Up to 5 different settings can be memorized for each channel, accommodating screws of varying lengths ■ Only counts normal screw tightening operations; if there is an incomplete screw tightening, it provides a warning with a lamp and a buzzer *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools
• driver
• Power tools

We would like to introduce our "Pistol-type and Angle-type Electric Screwdrivers." Our lineup includes the compact pistol-type "TBK series," the pistol-type "TBN series," and the angle-type "LRBK series." We also offer peripheral devices such as the "Screw Counter" and "Signal Control Box." 【Lineup】 ■ Compact Pistol Type: TBK-20 to 70L-D/U ■ Pistol Type: TBN Series ■ Angle Type: LRBK Series *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools
• driver
• Power tools

The "RBK/BK Series" is a super high-torque electric screwdriver that enhances work efficiency with a powerful brushless motor and clutch-type torque control. It boasts stable repeat torque accuracy that far exceeds that of air drivers, contributing to your torque management with its unique clutch mechanism. It can be used directly with just a power source, eliminating the need for additional equipment like piping. The RBK series offers products with different starting methods, available in two types: lever start and push start. The BK series is a high-speed version of the super high-torque electric screwdriver. The rotation speed of the driver has been improved, which is expected to enhance work efficiency and reduce tightening time. By attaching a driver arm during tightening, impact can be managed, allowing for vertical fixation and multi-directional tightening. With the right equipment combination, automatic control and counting functions can also be implemented as a mistake-proofing measure. ■ Improved workability with one-shot fastening ■ Stable repeat torque accuracy ■ Easy installation ■ Quiet operation, no oil mist generated ■ New high-torque pistol-type/angle-type models also available *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools
• driver
• Power tools

The "SKP-BC32HL-100/BC40HL-800" is a dedicated power-integrated screw counter that allows for various settings related to screw tightening, helping to prevent human error. It counts the number of times torque is applied, and when it reaches the set number of screws tightened, it notifies you with a lamp and buzzer. It can memorize up to five processes and manage them as continuous processes. Additionally, it supports detailed settings for the driver, allowing for adjustments to the slow start rotation speed and time. 【Features】 ■ Screw tightening count function ■ Channel memory function ■ Counts only normal screw tightening operations; if there is an incomplete screw tightening, it provides a warning with a lamp and buzzer ■ Screw tightening judgment time can be set with automatic measurement *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools
• driver
• controller

The "Sakimori KL-CTDS" is a poka-yoke data logger that quantifies the tightening state of screws, contributing to your company's traceability. It offers a wide range of drivers from micro torque to ultra-high torque. By utilizing a work switch (sensor), reliable screw tightening management can be achieved. Additionally, you can set the automatic reversal time after seating to adjust the degree of screw lift. 【Features】 ■ Torque conversion value display ■ Data log output ■ Screw counter ■ Extensive driver lineup ■ Management software included *For more details, please refer to the PDF materials or feel free to contact us.

• Other work tools
• driver
• Data Logger

The "Smart Servo Driver" allows you to set the number of rotations, rotation speed, and direction (forward/reverse) from the controller side. It can perform torque differentiation with a single unit, achieving precise tightening torque through a torque sensor. With the included "N-DAS" application, various settings and data management are possible. It can continuously execute a series of operations such as preventing biting, loosening after tightening, and re-tightening. Additionally, the barcode reader records the serial numbers of individual parts during the screw tightening process, and the job switches with each change of parts. 【Features】 ■ Equipped with a DC servo motor ■ Built-in torque sensor ■ Data log output ■ Screw counter (compatible with automated machines) ■ Management software included 【Other Features】 ■ Consolidates multiple electric screwdrivers into one ■ Data can be exported via SD card ■ Data log output and command communication possible via LAN cable connection ■ Jobs can be set up for tasks that require tightening at different torques ■ In the "N-DAS" settings, both push and lever start methods can be selected *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools
• driver
• Torque Control

We would like to introduce our "Screw Tightening Management System." We offer a range of products including the Smart Torque Controller "KL-TCG," the Poka-Yoke Data Logger "KL-CTDS," the built-in counter electric screwdriver "HFB-BE200/500/800-7P1," and the Slow Start Control Box "KL-SSBN." Please feel free to consult us when you need assistance. 【Features】 ＜KL-TCG＞ ■ Torque Control Method: Torque Sensor & Servo Motor ■ Pass/Fail Judgment Criteria: Torque Value, Number of Rotations ■ Torque Setting Method: Setting via Torque Controller or App *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools
• driver
• Power tools

Since its establishment in 1984, Kirius has aimed to create products that satisfy our customers as a manufacturer specializing in electric screwdrivers, and we have continued to this day. We believe that the numerous certifications we have obtained are one answer based on our philosophy of trust and integrity. Moving forward, we will strive to build your trust by aiming for better product development and services. 【Business Activities】 ■ Sales and development of electric screwdrivers and related equipment ■ Import and export of factory equipment-related devices *For more details, please refer to the PDF document or feel free to contact us.

• driver
• Other work tools
• Power tools