キリウスジャパン List of Products and Services

The "TBN Series" is a pistol-type electric screwdriver with a reverse start mechanism. With its unique clutch mechanism, it far surpasses air drivers in torque accuracy, preventing issues caused by motor overheating and allowing for stable output torque during work. Since there are no carbon particle emissions, it maintains a clean environment. 【Features】 ■ Equipped with a brushless motor ■ Maximum output torque: 18Nm ■ Stable output torque accuracy ■ Significantly reduces maintenance costs ■ Reduces environmental impact *For more details, please refer to the PDF document or feel free to contact us.

• driver

The "TBK Series" is a compact pistol-type brushless electric screwdriver. It features a unique clutch mechanism that achieves stable torque accuracy with one-shot fastening, contributing to your torque management. It is compatible with horizontal fastening and can be used directly as long as there is power. By connecting the "SKP-BC40HL Series," it is possible to implement functions such as count management, slow start, and screw tightening pass/fail judgment based on time settings. It also supports signal output functions for "OK, NG, OK ALL" and external inputs. We offer a wide range of other products as well. Please contact us for inquiries. The mounting position of the driver cord changes depending on the model. The handling and installation can also be adjusted according to the work site. “-D”: Bottom part of the handle “-U”: On top of the driver 【Demo units available for loan!】 *Customers wishing to borrow a demo unit should indicate "Request for demo unit" in their inquiry. We ask that you fill out the demo unit application form in advance. *The loan period is limited to within 2 weeks. *Please note that if there is no stock available, we may not be able to provide a demo unit.

• driver

We offer a "Smart Servo Driver" that combines the servo driver "SKT-CG" and the torque controller "KL-TCG." With the included software, you can set detailed tightening conditions, and the settings for multiple drivers can be consolidated into a single controller. It allows for easy recording and management of tightening data. Additionally, the torque detected by the torque sensor within the driver is reliably controlled by a high-performance servo motor, enabling precise screw tightening. 【Features】 ■ Adjustable tightening torque or rotation count / rotation speed / forward and reverse ■ Continuous execution of operations for a single screw tightening ■ Program switching possible via barcode reading or commands ■ Detection of tightening failures and prevention of missed tightening ■ Compatible with automated machines, external control possible via I/O input/output 【Other related products with encoders】 ■ Advanced Electric Screwdriver SGT-CC Series → Output torque (Nm) available from 0.3 to 7, with torque waveform diagrams during tightening also viewable Torque Controller KL-TCC *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Torque Control

The "HFB-BE series" is an electric screwdriver that counts the number of torque increases and alerts you with a buzzer sound when it reaches the set number of screws to be tightened. It only counts normal tightening operations and warns with sound and light if there are incomplete tightenings. Even if different screws are mixed, it can identify them with an NG judgment by setting a time. 【Features】 ■ Supports a minimum of 0.02Nm and a maximum of 4.90Nm → Available in three models: low torque, medium torque, and high torque ■ Has a driver operation stop function during NG → Prevents continuing work without noticing ■ Up to five channels can be registered, and continuous use of channels is possible → Function settings can be configured for each channel ■ Equipped with a slow start function and automatic reverse function ■ Includes a pass/fail judgment function ■ Depending on usage, model numbers with signal output for expanded functions are also available 【Electric Screwdriver Demo Units Available for Loan!】 *If you wish to request a demo unit, please indicate "Request for Demo Unit" in the inquiry section of the company website. *Each model requires a dedicated power supply. *For inquiries about prices or demo units, please contact us.

• driver

The "Bōjin KL-CTDS" is a poka-yoke data logger that, when combined with a driver, allows for the recording and output of screw tightening conditions. It features a screw counter that counts the number of OK judgments for tightening, and a pass/fail judgment function that detects tightening failures and provides warnings through sound and light. Up to 99 types of channels can be set, and multiple channels can be combined for management as a continuous process. Additionally, channel settings can be configured by scanning barcodes. Tightening data can be visually confirmed through application software, allowing for the data storage of the tightening condition for each individual screw. It supports six types of drivers, accommodating from micro torque to ultra-high torque, and can also be combined with automatic machines. [Features (excerpt)] ■ Data log output function ■ Screw counter (compatible with automatic machines) ■ Pass/fail judgment function ■ Slow start function ■ Program channel memory function ■ Automatic sampling function *For more details, please refer to the PDF document or feel free to contact us.

• Data Logger
• others

We deliver high-functionality and high-quality electric screwdrivers with reliable in-house production. Our lineup is extensive, and demo units are available for loan. We offer various models, including those with screw-tightening prevention features, performance-focused types, brushless motor types, low-voltage DC motors, and AC direct-in types. 【Featured Products】 ■ Screw Counter & Compatible Drivers ■ Electric Screwdrivers with Brushless Motors ■ Electric Screwdrivers ■ Rechargeable Torque Drivers *For more details, please refer to the "Comprehensive Catalog."

• driver

The "HFB-100 Series" is a super compact and lightweight standard-type electric screwdriver suitable for ultra-small screws. It has achieved significant miniaturization compared to conventional models, making it easy to handle and reducing fatigue. The ultra-compact controller does not sacrifice working space. No need to replace carbon brushes, making maintenance easy. You can select between 1000 RPM and 700 RPM with a switch. 【Features】 ■ Body weight of only 170g ■ User-friendly ■ Space-saving ■ Equipped with a brushless motor ■ Speed switchable between HI/LO For more details, please refer to the catalog or feel free to contact us.

• driver

The "HBA Series" is an AC transformer-less electric screwdriver that can be directly connected to an outlet, making it easy to change and handle lines. Durability has significantly improved, allowing for long-term use and cost-effectiveness. Maintenance is easy with no need to replace carbon brushes. The motor section comes with a 3-year warranty. It eliminates the generation of carbon particles, features low power consumption, and has a quiet design. We offer two models: a medium torque high-speed rotation type and a high torque type. 【Features】 ■ Equipped with a brushless motor ■ High output ■ Low running costs ■ Reduced environmental impact ■ Torque fixing ring included as standard For more details, please refer to the catalog or feel free to contact us.

• driver

The "SKP-BC40HL-3.0 / BC32HL-3.0" is a screw counter equipped with signal input and output for automatic machines, which counts the number of torque increases and alerts you with a lamp and sound when the set number of screws tightened is reached. It allows for various settings related to screw tightening, preventing human error. The "SKP-BC40HL-3.0" is for the BN-800/TBN/RBN series, while the "SKP-BC32HL-3.0" is for the BN-200/500 series. It can memorize up to five processes and manage them as continuous processes. 【Features】 ■ Automatic reverse function ■ Channel memory function ■ Screw tightening pass/fail judgment function ■ Easy setting of judgment time ■ Slow start control For more details, please refer to the catalog or feel free to contact us.

• driver

The "HFB-BE200/500/800 series" is an electric screwdriver equipped with a screw tightening count function that counts the number of times torque is applied and alerts you with a buzzer sound when the set number of screws tightened is reached. It only counts normal screw tightening operations and provides warnings with sound and light in case of incomplete tightening. 【Features】 ■ Maximum torque of 0.98Nm, the smallest in its class ■ Driver operation stop function during NG (not good) conditions ■ Up to 5 channels can be registered, and continuous management settings are possible ■ Count reduction function during reverse operation ■ Signal output expansion function settings available according to usage ■ Automatic reverse function with channel memory linkage possible ■ Equipped with pass/fail judgment function to measure screw tightening time 【Electric Screwdriver Demo Units Available for Loan!】 * Customers wishing to request a demo unit should indicate "Request for Demo Unit" in their inquiry. We ask that you fill out the demo unit application form in advance. * The loan period is limited to within 2 weeks. * Please note that if there is no stock available, we may not be able to provide a demo unit.

• driver

The "HFB-BE500 series" is an electric screwdriver that counts the number of torque-up cycles and alerts you with a buzzer sound when it reaches the set number of screw tightening operations. It only counts normal screw tightening actions and warns with sound and light if there are any incomplete tightenings. After tightening, if you continue with double tightening or confirmation tightening within the set time, it will not be counted. 【Features】 ■ Supports a wide range from 0.3 to 1.86Nm ■ Has a function to stop the driver operation during NG → Prevents continuing work without noticing ■ Up to 5 channels can be registered, and continuous management settings are also possible ■ Count reduction function during reverse rotation ■ Signal output expansion function settings are possible according to usage ■ Automatic reverse function available. Channel memory linkage is also possible ■ Equipped with a pass/fail judgment function. Measures the tightening time of screws 【Electric Screwdriver Demo Units Available for Loan!】 * Customers wishing to borrow a demo unit should indicate "Demo unit request" in their inquiry. We ask that you fill out the demo unit application form in advance. * The loan period is limited to within 2 weeks. * Please note that if there is no stock, we may not be able to provide a unit.

• driver

The "HFB-BE500 series" is an electric screwdriver equipped with a screw tightening count function that counts the number of times torque is increased and alerts you with a buzzer sound when the set number of screws tightened is reached. It only counts normal screw tightening operations and warns with sound and light if there is an incomplete tightening. After tightening, if you continue with double tightening or confirmation tightening within the set time, it will not be counted. 【Features】 ■ Supports up to 4.90Nm, high torque type ■ Has a driver operation stop function during NG → Prevents continuing work without noticing ■ Can register up to 5 channels, and continuous management settings are possible ■ Count reduction function during reverse operation ■ Signal output expansion function settings available according to use ■ Automatic reverse function available. Channel memory linkage is also possible ■ Equipped with pass/fail judgment function. Measures the tightening time of screws 【Electric Screwdriver Demo Units Available for Loan!】 * Customers wishing to borrow a demo unit should indicate "Demo unit request" in their inquiry. We ask that you fill out a demo unit application form in advance. * The loan period is limited to within 2 weeks. * Please be aware that if there is no stock, we may not be able to provide a unit.

• driver

The "HFA-6000/9000 series" is an AC transless type electric screwdriver that is very easy to move and install without the need for a controller. Since its launch, it has undergone continuous improvements and is loved by the most customers. The medium torque type "HFA-6000 series" balances compactness and high power, while the high power type "HFA-9000 series" features a high-output motor. For high torque applications, there is the pistol grip option "HFA-9000G series." 【Features】 ■ Transless ■ Soft grip that is easy on the operator ■ Wide torque range ■ Excellent cost performance ■ Torque fixing ring included as standard *For more details, please refer to the catalog or feel free to contact us. 【Electric Screwdriver Demo Units Available for Loan!】 *Customers wishing to request a demo unit should indicate "Request for Demo Unit" in their inquiry. We ask that you fill out the demo unit application form in advance. *The loan period is limited to within 2 weeks. *Please note that if there is no stock available, we may not be able to provide a demo unit.

• driver

The "HFD-2000/5000/7000 series" is a standard type electric screwdriver that can be used safely due to its low voltage, balancing durability and cost. With a rich lineup ranging from compact screwdrivers to screw-adhesion types, it features a new ergonomic design that, combined with a soft grip, reduces fatigue during long hours of work. By connecting a slow start box, the rotation speed and time at startup can be controlled. 【Features】 ■ Low voltage DC motor ■ Soft grip that is gentle on the user ■ Space-saving design ■ Connectable to a slow start box *For more details, please refer to the catalog or feel free to contact us. 【Electric Screwdriver Demo Units Available for Loan!】 *Customers wishing to request a demo unit should indicate "Request for Demo Unit" in their inquiry. We ask that you fill out the demo unit application form in advance. *The loan period is limited to within 2 weeks. *Please note that if there is no stock available, we may not be able to provide a unit. Thank you for your understanding.

• driver

The "HS-200 series" is an electric screwdriver that features a clutch that slips when the set torque is reached, and the motor stops when the lever is released. By excluding the auto-stop function, it achieves a low price, and due to the slipping clutch, there is no worry about over-tightening. Being electric, there is no concern about torque variation due to changes in air pressure, and the torque accuracy is superior to that of general air drivers. 【Features】 ■ Cost-focused design ■ Cushion clutch type ■ Transless type ■ Stepless torque adjustment mechanism ■ Torque fixing ring included as standard *For more details, please refer to the catalog or feel free to contact us. 【Electric Screwdriver Demo Units Available for Loan!】 *Customers wishing to request a demo unit should indicate "Request for Demo Unit" in their inquiry. We ask that you fill out the demo unit application form in advance. *The loan period is limited to within 2 weeks. *Please note that if there is no stock available, we may not be able to provide a demo unit. Thank you for your understanding.

• driver

The "KTM Series" allows for torque checks on electric screwdrivers, torque wrenches, and torque drivers, and can also be used for torque management. It is a torque measuring device that can determine the pass/fail status of measurement values based on upper and lower limits, and displays numerical data from the measuring instrument. Inspection reports, calibration certificates, and traceability system diagrams are issued, and calibration support is also available. The "KTM-250" has a measurement range from 5N·m to 25N·m, making it suitable for high-torque tools. We also offer "KTM-6/KTM-15" for small torque tools, capable of measuring minimum torque down to 0.20cN·m, allowing for the measurement of very low torque tools. 【Features】 ＜KTM-250＞ ■ Suitable for moment management of various components during continuous work ■ Pass/fail determination of measurement values possible with upper and lower limit settings ＜KTM-6/KTM-15/KTM-150＞ ■ Pass/fail determination of measurement values possible with upper and lower limit settings ■ Battery-operated for convenient portability <Common Specifications> ■ Average value calculation ■ Auto power off ■ USB output ■ Auto zero clear ■ Data memory For more details, please refer to the catalog or feel free to contact us.

• driver

The NejiDas series "BSF-1450" is designed for the transport of short screws and screws with thin heads, allowing for stepless adjustment from M1.4 to M5.0. When the type of screw used is changed, the rail width can also be adjusted steplessly, eliminating the need for additional rail purchases. The horizontal transport is achieved through a rotating drum and a horizontal straight rail, which prevents clogging from debris. With two adjustable features for vibration intensity and vibration & drum rotation time, this product offers control functions designed for various types of screws. 【Features】 ■ Compatible with screws from M1.4 to M5.0 ■ Stepless adjustment of rail width, eliminating the need for additional rail purchases ■ Unique transport method that prevents clogging from debris ■ Various adjustment functions enable control for different types of screws 【Screw Supply Machine BSF-1450 Demo Unit Available for Rent!】 *Customers wishing to request a demo unit should include "Request for Demo Unit" in their inquiry. *The rental period is limited to within two weeks.

• Parts feeder

The "KP-AUXA" is an auxiliary arm for high-torque electric screwdrivers. It can absorb shocks during torque tightening. The movable range can be adjusted from 50mm to 830mm, and it is easy to install, making it a convenient product for use. It is designed for vertical screw tightening and is compatible with the RBN series and TBN series models. 【Features】 - Driver arm for high-torque electric screwdrivers - Absorbs shocks during tightening - Can be used for reducing strain and safety management - Easy to install We also offer electric screwdriver arms with flexible joints for side mounting and other tasks! More information is available on a separate page! 【Demo unit of the "KP-AUXA" driver arm available for loan!】 * Customers wishing to borrow a demo unit should indicate "Request for demo unit" in their inquiry. We ask that you fill out the demo unit application form in advance. * The loan period is limited to within two weeks. * Please note that if there is no stock available, we may not be able to provide a demo unit.

• driver

The "KP-AUX-C50 / E50 / B50 / D50" is a flexible driver arm that allows for safe work without the impact of an electric screwdriver. You can choose from four types based on the installation method. 【Features】 ■ Can operate at various angles ■ Very easy to handle For more details, please refer to the catalog or feel free to contact us.

• driver

The "KL-SSBN" is equipped with a slow start function, allowing for precise tightening conditions. The starting rotation speed and rotation time can be set. It is also a slow start control box that can perform I/O output with dry contacts. 【Features】 ■ Slow start function ■ Equipped with signal output terminals (torque increase signal, operation signal, reverse signal) For more details, please refer to the catalog or feel free to contact us.

• driver

The "KL-SCBSN" is a signal control box compatible with automatic machines that allows for the setting of rotational speed and time at startup. It supports over 20 types of drivers, which can be used according to the situation. ■ Input/Output Signals - Output: Torque-up signal, operating signal, reverse signal - Input: Work switch, start, reverse start ■ Signal Method - Output: MOS relay (dry contact) MAX DC40V 250mA - Input: No-voltage a contact or open collector 【Features】 ■ Signal output ■ Signal input ■ Temporary tightening function ■ Work switch compatibility ■ Slow start 【KL-SCBSN Demo Units Available for Loan!】 * We also offer demo units for compatible drivers "BN-200," "BN-500 series," "BN-800 series," and "TBN, RBK series." * Customers wishing to request a demo unit should indicate "Request for demo unit" in their inquiry. We ask that you fill out the demo unit application form in advance. * The loan period is limited to within 2 weeks. * Please note that if there is no stock available, we may not be able to provide a unit. Thank you for your understanding.

• driver

The "KL-600/1200/2000" is a tool balancer with capacities of 0.3–0.8, 0.6–1.5, and 1.0–2.0 kg. 【Specifications】 ■ Model: KL-600 / KL-1200 / KL-2000 ■ Capacity (kg): 0.3–0.8 / 0.6–1.5 / 1.0–2.0 ■ Stroke: 1.6m ■ Rope diameter: 2.5mm ■ Weight (g): 490 / 520 / 530 For more details, please refer to the catalog or feel free to contact us.

• driver

The "RM-4/RM-5/RM-6" are magnetic rings with powerful magnets that securely catch screws. 【Compatible Bits】 ■RM-4: φ4mm ■RM-5: φ5mm, 5mm hex, φ6mm ■RM-6: φ7mm, 6.35mm hex For more details, please refer to the catalog or feel free to contact us.

• driver

The "HFB-200/500/800 series" is a standard type electric screwdriver that has significantly improved durability compared to conventional models. With a substantial increase in output, it has achieved a more compact design, and the use of a soft grip reduces fatigue. Additionally, there is no need to replace carbon brushes, which helps keep running costs down. 【Features】 ■ Reduces the burden on the operator ■ Low running costs ■ Signal output and slow start function ■ Connectable to a screw counter ■ Torque fixing ring included as standard For more details, please refer to the catalog or feel free to contact us.

• driver

The "TBN Series" is a super high-torque electric screwdriver that enhances work efficiency with a powerful brushless motor and clutch-type torque control. With its unique clutch mechanism, it boasts stable repeatable torque accuracy that far surpasses air drivers, contributing to your torque management. It requires no additional equipment like piping and can be used directly as long as there is a power source. 【Features】 ■ Improved work efficiency with one-shot fastening ■ Reduced burden on operators ■ Easy maintenance ■ Reduced environmental impact ■ Low voltage specification *For more details, please refer to the catalog or feel free to contact us. 【Electric Screwdriver Demo Units Available for Loan!】 *Customers wishing to request a demo unit should indicate "Request for Demo Unit" in their inquiry. We ask that you fill out the demo unit application form in advance. *The loan period is limited to within 2 weeks. *Please note that if there is no stock available, we may not be able to provide a unit, so we appreciate your understanding in advance.

• driver

The "RBK Series" is a super high-torque electric screwdriver that improves work efficiency with a powerful brushless motor and clutch-type torque control. It boasts stable repeat torque accuracy that far exceeds that of air drivers, contributing to your torque management with its unique clutch mechanism. It can be used directly with just a power source, eliminating the need for piping or other equipment. By attaching a driver arm, the impact during tightening can be managed, allowing for vertical fixation and multi-directional tightening with vertical holding. It is also possible to implement poka-yoke measures such as automatic machine control and counting functions through equipment combinations. 【Features】 ■ Improved work efficiency with one-shot fastening ■ Reduced burden on operators ■ Easy maintenance ■ Reduced environmental impact ■ Signal input/output functions can be added (compatible with automatic machines) ■ Counting function for the number of screws tightened can be added ■ New pistol and angle types are also available 【Demo units available for loan!】 * Customers wishing to request a demo unit should indicate "Request for demo unit" in their inquiry. We ask that you fill out the demo unit application form in advance. * The loan period is limited to within 2 weeks. * Please note that if there is no stock available, we may not be able to provide a demo unit.

• driver

The optional specification "HFB-BE500-3.A series" is an electric screwdriver with a built-in screw counter that features a work switch interlocking function. By using picking sensors and work sensors to control the screwdriver, it manages the screw tightening process more reliably, ensuring that no tightening is overlooked. It outputs a signal upon completion of counting for each channel. This can be linked with the work switch input of another screwdriver to mutually control multiple drivers. 【Features】 ■ Expanded functions such as signal input/output ■ Wide torque range of 0.3-1.86Nm ■ Driver operation stop function in case of NG ■ Channel memory function ■ Count reduction function during reverse rotation For more details, please refer to the catalog or feel free to contact us.

• driver

The "HFB-BE500-7P1 series" is an electric screwdriver equipped with a built-in function that outputs signals for torque increase, NG, and OK ALL (completion of set number). It counts the number of torque increases and notifies you with sound and light when the set number is reached. It can also be connected to other devices. 【Features】 ■ Outputs signals for work status ■ More reliable error warnings ■ Up to 5 types of settings available ■ Prevention of double tightening counts, etc. For more details, please refer to the catalog or feel free to contact us.

• driver

The "HFB-BE200-7P1 series" is an electric screwdriver equipped with a function that outputs signals for torque increase, NG, and OK ALL (completion of set number). It counts the number of torque increases and notifies you with sound and light when the set number is reached. It can also be connected to other devices. 【Features】 ■ Outputs signals for work status ■ More reliable error warnings ■ Up to 5 types of settings possible ■ Prevents double tightening counts, etc. For more details, please refer to the catalog or feel free to contact us.

• driver

The "HFB-BE800-7P1 series" is an electric screwdriver equipped with a built-in function that outputs signals for torque increase, NG, and OK ALL (completion of set number). It counts the number of torque increases and notifies you with sound and light when the set number is reached. It can also be connected to other devices. 【Features】 ■ Outputs signals for work status ■ More reliable error warnings ■ Up to 5 types of settings possible ■ Prevents double tightening counts, etc. For more details, please refer to the catalog or feel free to contact us.

• driver

The "BN Series" is an electric screwdriver equipped with a brushless motor that supports slow start boxes and screw tightening counters. When combined with the KL-SSBN+ controller, it allows for slow start and signal output management. It can also be connected to a screw counter for more advanced management. 【Features】 ■ Reduces the burden on operators ■ Low running costs ■ Signal output and slow start functions ■ Connectable to screw counters ■ Standard torque fixing ring For more details, please refer to the catalog or feel free to contact us.

• driver

The "SKD-B2000/B5000 series" is an electric screwdriver equipped with a brushless motor that achieves high precision across a wide torque range, making it a popular choice. The "SKD-B2000 series" has an output torque of 0.98Nm (the smallest in its class) and a body weight of 285 grams, while the "SKD-B5000 series" is a medium torque type. 【Features】 ■ Long-term stable torque accuracy ■ Significant reduction in maintenance costs ■ 20% size reduction achieved (SKD-B2000 series) ■ Reduced environmental impact *For more details, please refer to the catalog or feel free to contact us. 【Electric Screwdriver Demo Units Available for Loan!】 *Customers wishing to request a demo unit should indicate "Demo Unit Request" in their inquiry. We ask that you fill out the demo unit application form in advance. *The loan period is limited to within 2 weeks. *Please note that if stock is unavailable, we may not be able to provide a unit. Thank you for your understanding.

• driver

The HBA series is an AC brushless type electric screwdriver that supports up to 2.16Nm, making it easy to handle and change lines. Additionally, since it is equipped with a brushless motor, there is no need to replace carbon brushes. We offer two types: lever start and push start, and it is designed for medium torque. It also eliminates the generation of carbon particles and can be used with low power consumption. 【Features】 - Supports up to 2.18Nm and weighs only 470g! - Available in two types: lever start and push start - No need to replace carbon brushes; the motor comes with a three-year warranty - Medium torque specifications - Low power consumption, usable at 40W - Can be directly connected to an outlet - Standard equipped with a torque fixing ring 【Electric Screwdriver Demo Units Available for Loan!】 * Customers wishing to request a demo unit should indicate "Request for Demo Unit" in their inquiry. We ask that you fill out the demo unit application form in advance. * The loan period is limited to within two weeks. * Please note that if stock is unavailable, we may not be able to provide a unit. Thank you for your understanding.

• driver

The SKD-B2000 series is an electric screwdriver equipped with a brushless motor that supports up to 0.98Nm. It can maintain high-precision torque over a long period while keeping the cost of expensive consumables low. It is available in a lever-start format, allowing for a wide range of torque utilization. It features high-precision torque capabilities and eliminates the generation of carbon particles, enabling low power consumption. A dedicated power supply for the electric screwdriver is also included. 【Features】 - Supports up to 0.98Nm and weighs only 285g! - Achieves stable torque accuracy without compromising functionality! - Compact design improves handling and reduces the burden on operators. - Reduces environmental impact → No carbon particle emissions, leading to reduced power consumption. 【Electric Screwdriver Demo Units Available for Loan!】 *Customers wishing to request a demo unit should indicate "Demo Unit Request" in their inquiry. We ask that you fill out the demo unit application form in advance. *The loan period is limited to within 2 weeks. *Please note that if stock is unavailable, we may not be able to provide a demo unit. If you have any questions, please feel free to contact us!

• driver

The SKD-B5000 series is an electric screwdriver equipped with a brushless motor that supports up to 1.76Nm. It allows for high-precision torque usage over a long period while keeping the cost of expensive consumables down. It is available in two types: lever start and push start, and is categorized based on output torque. It is a medium torque type, and the bits can be used in 5mm and 5mm hex sizes. A dedicated power supply for the electric screwdriver is also included. 【Features】 - Supports up to 1.76Nm, with two types of SKD series available! - Medium torque type with a wide torque range - Available in two types: lever start and push start! - Compatible bits are "5mm" and "5mm hex" 【Electric Screwdriver Demo Units Available for Loan!】 * Customers wishing to request a demo unit should indicate "Demo unit request" in their inquiry. We ask that you fill out the demo unit application form in advance. * The loan period is limited to within 2 weeks. * Please note that if there is no stock, we may not be able to provide a unit, so we appreciate your understanding in advance. If you have any questions, feel free to contact us!

• driver

The HBA6000 series is an AC brushless type electric screwdriver that can handle up to 4.90Nm, making it easy to maneuver and change lines. Additionally, since it is equipped with a brushless motor, there is no need to replace carbon brushes. We offer two models: lever start and push start, both designed for high torque. It also eliminates the generation of carbon particles and can be used with low power consumption. 【Features】 - Supports up to 4.90Nm, using an AC brushless electric screwdriver - Available in two types: lever start and push start - No need to replace carbon brushes, with a three-year warranty on the motor - High torque specifications - Low power consumption, usable at 90W to 120W - Standard equipped with a torque fixing ring 【Electric Screwdriver Demo Units Available for Loan!】 * Customers wishing to request a demo unit should include "Request for Demo Unit" in their inquiry. We ask that you fill out the demo unit application form in advance. * The loan period is limited to within two weeks. * Please note that if there is no stock available, we may not be able to provide a unit, so we appreciate your understanding in advance.

• driver

The HBA6125 series is an AC brushless electric screwdriver that can handle up to 2.45Nm, making it easy to maneuver and change lines. Additionally, since it is equipped with a brushless motor, there is no need to replace carbon brushes. We offer two types: lever start and push start. It is a high-torque model with improved rotation speed. It eliminates the generation of carbon particles and can be used with low power consumption. 【Features】 - Supports up to 2.45Nm, using an AC brushless electric screwdriver - Available in two types: lever start and push start - No need to replace carbon brushes; the motor comes with a three-year warranty - High torque and high-speed rotation - Low power consumption, usable at 120W - Torque fixing ring is standard equipment 【Electric Screwdriver Demo Units Available for Loan!】 *Customers wishing to request a demo unit should indicate "Request for Demo Unit" in their inquiry. We ask that you fill out the demo unit application form in advance. *The loan period is limited to within two weeks. *Please be aware that if there is no stock available, we may not be able to provide a demo unit.

• driver

The HBA series is an AC transless type electric screwdriver that supports up to 2.16 Nm, making it easy to handle and change lines. Additionally, as it is equipped with a brushless motor, there is no need to replace carbon brushes. We offer two models: lever start and push start, both designed for medium torque. It also eliminates the generation of carbon particles and can be used with low power consumption. 【Features】 - Supports up to 2.18 Nm and weighs only 470 g! - Available in two types: lever start and push start - No need to replace carbon brushes; the motor comes with a three-year warranty - Medium torque specifications - Low power consumption, usable at 40W - Torque fixing ring included as standard 【Electric Screwdriver Demo Units Available for Loan!】 * Customers wishing to request a demo unit should indicate "Request for Demo Unit" in their inquiry. We ask that you fill out the demo unit application form in advance. * The loan period is limited to within two weeks. * Please note that if there is no stock available, we may not be able to provide a demo unit. Thank you for your understanding.

• driver

The "KP-AU-VAR" is an auxiliary arm for high-torque electric screwdrivers. It can absorb shocks during torque tightening. The movable range can be adjusted from 50mm to 830mm, and it is easy to install, making it a convenient product for use. It comes with a flexible joint, allowing for tightening in multiple directions, such as horizontal tightening. It is compatible with the RBN and TBN series of electric screwdrivers. 【Features】 - Driver arm for high-torque electric screwdrivers - Absorbs shocks during tightening - Can be used for load reduction and safety management - Easy to install We also offer auxiliary arms for electric screwdrivers that can perform vertical tightening! These are listed on a separate page! 【Demo unit of the "KP-AU-VAR" driver arm available for loan!】 * Customers wishing to borrow a demo unit should indicate "Request for demo unit" in their inquiry. We ask that you fill out the demo unit application form in advance. * The loan period is limited to one week. * Please note that if there is no stock available, we may not be able to provide a demo unit.

• driver

The "KP-AUX1T" is an auxiliary arm for high-torque electric screwdrivers. It can absorb shocks during torque tightening. The movable range can be adjusted from 50mm to 830mm, and it is easy to install, making it a convenient product to use. It is designed for vertical screw tightening, and it is compatible with three models: the HFA-9000 series and the HFB-800/BE-800 series. 【Features】 - Driver arm for high-torque electric screwdrivers - Absorbs shocks during tightening - Can be used for load reduction and safety management - Easy to install We also offer electric screwdriver arms with flexible joints that can perform side-mounted tasks! More information is available on a separate page! 【Demo unit of the driver arm "KP-AUXA" available for loan!】 * Customers wishing to borrow a demo unit should indicate "Request for demo unit" in their inquiry. We ask that you fill out the demo unit application form in advance. * The loan period is limited to within two weeks. * Please note that if we do not have stock, we may not be able to provide a demo unit.

• driver

The "KP-AU-VA1" is an auxiliary arm for high-torque electric screwdrivers. It can absorb shocks during torque tightening. The movable range can be adjusted from 50mm to 830mm, and it is easy to install, making it a convenient product for use. It comes with a flexible joint, allowing for tightening in multiple directions, such as horizontal tightening. The compatible models are the HFA-9000 series and the HFB-800/BE-800 series. 【Features】 - Driver arm for high-torque electric screwdrivers - Absorbs shocks during tightening - Can be used for reducing strain and safety management - Easy to install We also offer electric screwdriver auxiliary arms that can perform vertical tightening tasks! Please see our separate page for more information! 【Demo unit of the "KP-AU-VA1" driver arm available for loan!】 * Customers wishing to borrow a demo unit should indicate "Request for demo unit" in their inquiry. We ask that you fill out the demo unit application form in advance. * The loan period is limited to one week. * Please note that if there is no stock available, we may not be able to provide a unit. Thank you for your understanding.

• driver

Our company offers a lineup of "high-torque electric screwdrivers" that enhance work efficiency through brushless motors and clutch-type torque control. The output torque can handle up to a maximum of 50N·m. Being electric allows for stable torque management, eliminating the need for equipment such as piping found in air drivers. The straight type 'RBK series' can be used in conjunction with auxiliary arms and is compatible with automatic machines, allowing for screw tightening via IO input. We also offer the gun-type 'TBN series', which can be selected according to your application. We provide a "driver arm" that reduces strain on the wrist. 【Features】 ■ Improved work efficiency with one-shot fastening ■ Reduced burden on the operator ■ Easy maintenance ■ Reduced environmental impact ■ Capable of signal input/output functions (compatible with automatic machines) ■ Capable of screw count functionality *Demo units are available for loan. Please feel free to contact us.

• driver

The "BK9120-L/P" is a super high-torque electric screwdriver that improves work efficiency with its powerful brushless motor and clutch-type torque control. With its unique clutch mechanism, it offers stable torque accuracy that far surpasses air drivers, contributing to your torque management. Additionally, it eliminates the need for carbon brush replacement and, combined with a contactless switch that has no contact deterioration, reduces maintenance effort. We also offer the "BK960-LF/PF," which has different output torque and rotation speed. 【Features】 ■ Stable repeatable torque accuracy ■ Easy installation ■ Quiet operation ■ Effortless maintenance ■ No oil mist generated due to electric operation *For more details, please refer to the PDF document or feel free to contact us.

• driver

The "BK960-LF/PF" is a super high-torque electric screwdriver that enhances work efficiency with a powerful brushless motor and clutch-type torque control. It improves workability with one-shot fastening and boasts stable torque precision thanks to its unique clutch mechanism. Additionally, it does not require any piping or other facilities and can be used directly as long as there is a power source. We also offer the "BK9120-L/P," which has different output torque and rotation speed. 【Features】 ■ Stable torque precision with a unique clutch mechanism ■ No need for piping or other facilities ■ No need for carbon brush replacement ■ Contactless switch with no contact degradation ■ Powerful brushless motor *For more details, please refer to the PDF document or feel free to contact us.

• driver

The "HFB-100" series is an ultra-compact and lightweight electric screwdriver suitable for micro screws. It features a lever start mechanism, and with a body weight of 170 grams, it is easy to use. The dedicated controller is also compact, making it easy to handle and reducing the workload. Additionally, it has a brushless motor, eliminating the need for carbon brush replacement and allowing for easy maintenance. The rotation speed can be switched between 1000 RPM and 700 RPM. An optional low-speed function model is also available. 【Features】 - Compatible with micro screws, achieving a weight of 170g! - Lever start mechanism - No need for carbon brush replacement; the motor comes with a three-year warranty - The controller is compact, making it easy to handle - Rotation speed can be switched between 1000 RPM and 700 RPM with a switch - Low-speed version also available 【Electric Screwdriver Demo Units Available for Loan!】 * Customers wishing to request a demo unit should indicate "Demo Unit Request" in their inquiry. We ask that you fill out the demo unit application form in advance. * The loan period is limited to within two weeks. * Please note that if there is no stock available, we may not be able to provide a unit, so thank you for your understanding in advance.

• Power tools