東芝情報システム Product Lineup

Do you have any concerns regarding wind direction and wind speed measurement? ● I want to easily check the airflow in factories or clean rooms. ● I want to manage airflow, but it's difficult to introduce large measurement equipment. ● I want to not only visualize wind direction and speed but also record it as data. ▼ Leave it to the wind direction and speed IoT sensor "anemolink-2D"! ―― Features ――――――――――――――――― ◆ An IoT sensor for wind direction and speed that can be measured just by placing it. ◆ Intuitive visualization of wind direction (upwind) and wind speed through LED display. ◆ Lightweight and compact, suitable for any installation location. ◆ Supports real-time measurement and data acquisition. ―――――――――――――――――――――― The anemolink-2D is a wind direction and speed IoT sensor that combines electronics technology and AI technology to visualize and acquire data on airflow. Its portable compact size allows for measurement simply by placing it in areas where airflow or gentle breezes are a concern. It can be used in environments where airflow management affects quality and yield, such as manufacturing lines and clean rooms.

Are there any such issues in the manufacturing site or machine room? ● Delayed detection of temperature anomalies caused the production line to stop ● Undetected water leaks led to environmental pollution and production line stoppage ● Visual inspection alone has limitations in leak detection ● Insufficient drying resulted in product defects 　　　　　　　　　　　　　▼ Leave the non-contact monitoring of "temperature, water leaks, and drying" to VisilantEye! ――Features―――――――――――――――――――――― ◆ Easily switch between high temperature, low temperature anomalies, water leak, and drying detection ◆ Simply install it facing the target. Easily introduced with USB power supply ◆ Collaborates with stack signal lights and PLCs to instantly visualize abnormalities on-site ――――――――――――――――――――――――――― VisilantEye is an equipment monitoring sensor that combines our electronics technology and software technology. It can non-contact detect changes in temperature, water leaks from equipment and piping, and the drying status of objects in factories and manufacturing sites.

Are there any issues related to "heat and temperature" in your manufacturing site or machine room? ● Delayed detection of temperature anomalies or heat increases led to equipment troubles and production line stoppages. ● Overlooked motor temperature anomalies resulted in failures. ● Want to monitor temperature for fire prevention, but there aren't enough personnel. ● Permanent and automatic monitoring is difficult. 　　　　　　　　　　　　　▼ Leave it to VisilantEye to monitor low and high temperature anomalies non-contact! ――Features―――――――――――――――――――――― ◆ Quickly detect anomalies with a non-contact thermal detection sensor. ◆ Alerts you to temperature anomalies. ◆ Easy installation with retrofitting that requires no construction. ――――――――――――――――――――――――――― VisilantEye incorporates three functions in one device: temperature detection, leak detection, and dryness detection. In the temperature detection mode, it continuously monitors equipment and surrounding environments, contributing to early detection of anomalies. By eliminating reliance on human patrols and visual inspections, it enables remote status monitoring and preventive maintenance, leading to labor-saving in maintenance tasks and improved safety.

Are there any issues with "water leakage" in your manufacturing site or machine room? ● Delayed detection of water leakage from floors or pipes has led to equipment troubles and production stoppages. ● Regular patrols and visual checks are necessary to confirm water leakage. ● There are concerns about the risk of water leakage during unmanned hours or at night. ● I want to monitor water leakage automatically, but installation and wiring are difficult. 　　　　　　　　　　　　　▼ Leave it to VisilantEye to monitor the "leakage status" non-contact! ―― Features ―――――――――――――――――――――― ◆ Detects water leakage from floors and target areas with a non-contact leakage detection sensor. ◆ Alerts you to water leakage and supports early response. ◆ Easy to install with retrofitting that requires no construction. ―――――――――――――――――――――――――― VisilantEye is equipped with three functions in one device: temperature detection, water leakage detection, and dryness detection. In the water leakage detection mode, it continuously monitors for water leaks or liquid occurrences around equipment, contributing to the early detection of abnormalities. This enables remote status monitoring and rapid initial response without relying on human patrols or visual inspections, leading to the reduction of equipment damage and labor-saving in maintenance operations.

Are there any issues with "drying" like this in your manufacturing site or machine room? ● Not noticing insufficient drying, leading to product defects or quality deterioration ● Judging the completion of the drying process relying on the operator's experience ● Repeated on-site checks are necessary to confirm the drying state ● Wanting to monitor the drying state automatically but lacking a method 　　　　　　　　　　　　　▼ Leave it to VisilantEye to monitor the "drying state" non-contact! ――Features―――――――――――――――――――――― ◆ Non-contact drying detection sensor that detects the drying state of the target object ◆ Alerts for drying completion and insufficient drying ◆ Easy installation with retrofitting that requires no construction ―――――――――――――――――――――――――― VisilantEye is equipped with three functions in one device: temperature detection, leak detection, and drying detection. In the drying detection mode, it continuously monitors the drying state of the target object and surrounding environment, allowing for early detection of signs of insufficient or excessive drying. By conducting objective state monitoring without relying on human experience or intuition, it contributes to the automation and efficiency of processes and the reduction of unnecessary operation of drying equipment.

Do you have any of these concerns? ● Frequent peeling and disconnection of leak detection tape ● Maintenance burden due to regular replacement and repairs ● Delayed detection of leaks that do not directly touch the leak tape, making early detection difficult ▼ Leave it to the Liquid Detection Algorithm, Liquidseeker! ――Features――――――――――――――――― ◆ Non-contact detection over a wide area ◆ Early detection even at the level of a few drops ◆ Reduced maintenance costs due to camera detection ―――――――――――――――――――――― Liquidseeker is an algorithm (software IP) that utilizes the SWIR (short-wave infrared) wavelength band to achieve non-contact liquid detection. By integrating this IP into a ToF camera that meets the application conditions, it becomes possible to detect liquid leaks, seepage, and particles containing moisture.