日本テスコン List of Products and Services

Balanced poppet design for high reliability and excellent durability. High flow capacity: Cv = 0.75 or Cv = 2.0, suitable for gas and liquid applications, normally open or normally closed. Made of brass or stainless steel 316, low operating pressure: 0.41 MPa (minimum). High pressure: up to 41.38 MPa (brass) and up to 68.97 MPa (stainless steel). A 103.45 MPa version is also available. *For more details, please download the catalog or contact us directly.

• Pressure Control

The 26-1700 series is a piston-type back pressure valve for high pressure applications. The back pressure valve has functions similar to a safety valve and can also be used as a safety valve in applications that require high sensitivity control with minimal difference between blow-off and blow-stop. This regulator has seven types of primary pressure adjustment ranges, and the adjustment range can be easily changed by replacing internal components in a single unit. *For more details, please download the catalog or contact us directly.

• Pressure Control

Designed for high-pressure liquids or gases, it features a capture vent for easy pressure adjustment. There are three types: Eppling road type, Dome road type, and air actuator, with options for soft seats and metal-to-metal seats. The standard model includes a 40-micron filter (soft seat model) for long-lasting performance. A high flow type with Cv = 0.3 is also available. It is recommended to be used with the Escom electronic PID controller. *For details, please download the catalog or contact us directly.

• Pressure Control

The 54-2000 series is a pressure reducing valve for high pressure, low flow liquids. For the seat, 17-4 stainless steel is used, and for the main valve, tungsten carbide is utilized. This pressure reducing valve has a built-in venting mechanism, allowing the fluid downstream of the valve to be released through the vent port. *For more details, please download the catalog or contact us directly.*

• Pressure Control

The high-pressure liquid back pressure valve "54-2100 series" is a piston-type back pressure valve for high-pressure liquids. The back pressure valve has functions similar to those of a safety valve and can also be used as a safety valve in applications that require highly sensitive control with minimal difference between blow-off and blow-stop. This regulator has eight types of primary pressure adjustment ranges, and the adjustment range can be easily changed by replacing internal components in a single unit. *For more details, please download the catalog or contact us directly.*

• Pressure Control

The Tescom ER5000 series is an electronic pressure regulator equipped with a built-in PID controller. In addition to being used as a standalone pressure reducing valve, it can be combined with various Tescom pressure regulators to control pressures from liquids, gases, and vacuum environments up to a maximum of 110 MPa, making it suitable for a wide range of applications. Pressure settings can be made via analog signals (4-20 mA / 1-5 V) or through USB and RS-485 from a computer. A dedicated software for setting PID parameters, program operation, SP values, and PV value monitoring is included (compatible with Windows 7 and 8). *For more details, please download the PDF or feel free to contact us.

• Pressure Control

The 44-1100 series is a high-pressure pressure reducing valve capable of reducing pressure up to 68.9 MPa to a maximum of six adjustable pressure ranges below 41.3 MPa. The adjustment range can be easily changed by replacing internal components within a single unit. This regulator comes standard with a built-in vent valve, allowing for the release of pressure from a closed piping system through the pressure reducing valve. There is also a non-vent option available for flammable gases and liquids. *For more details, please download the catalog or contact us directly.*

• Pressure Control

Adamant Valve Company is a company established in Irvine, California, USA. The company has grown globally by manufacturing high-precision stainless steel sanitary valves, pumps, and pipe fittings as a sanitary valve manufacturer. To this day, they are used in various industries such as food, beverage, pharmaceuticals, and cosmetics. The angle seat valve features a structure that is resistant to water hammer. It is a valve suitable for large flow rates with few troubles, and in the unlikely event of a leak issue, maintenance can be performed by replacing the actuator and seat components without removing it from the piping. There is also a rich variety of connection standards, including Rc threads, NPT threads, G threads, flanges, and welding, with sizes ranging from 3/8 to 2-1/2. Additionally, types with indicators are also available.

• Other food machinery
• valve
• Flow Control

The impeller rotates due to the pressure of the fluid, with the rotation speed proportional to the cumulative flow rate and the rotational velocity proportional to the instantaneous flow rate. A non-contact pickup sensor detects the movement of the blades and outputs pulses. In contrast to gear flow meters, which have a wider measurement range with higher viscosity, turbine flow meters can maximize their measurement range with lower viscosity.

• Flow Meter

The impeller rotates due to the pressure of the fluid, with the rotation speed proportional to the cumulative flow rate and the rotational velocity proportional to the instantaneous flow rate. A non-contact pickup sensor detects the movement of the blades and outputs pulses. While gear flow meters have a wider measurement range with higher viscosity, turbine flow meters can utilize their measurement range better with lower viscosity.

• Flow Meter

The impeller rotates due to the fluid pressure, and a non-contact pickup sensor detects the movement of the blades and outputs pulses. The rotation count is proportional to the cumulative flow, and the rotation speed is proportional to the instantaneous flow.

• Flow Meter

The TCF is designed for torque detection within 1 to 3 rotations (without the cable getting tangled) with stationary or slow rotation, rather than continuous rotation. It is low-cost due to the absence of slip rings, allowing for high precision and stable measurements across a wide range from low to high torque, and it can accommodate not only double-sided flanges but also keyway round shafts and custom machining as specified. It is used for performance testing of air drivers, electric drivers, torque testing of automotive parts, and in robotics, among other applications. *For more details, please download the catalog or contact us directly. *For alternatives to the TCF non-rotating torque converter, please contact us.

• Pressure Control

This load cell is mainly used when there is no installation space available. It is compact yet capable of being manufactured for high capacities, and it provides high precision and stable measurements. Changes to the external dimensions are also possible, and it is widely used in applications such as coverings, ergonomics, and robotics.

• Pressure Control

It is a high-quality general-purpose load cell with a wide load range. It is low-priced and high-quality. *For details, please download the catalog or contact us directly.

• Pressure Control

Unlike the structure of general load cells, this product is designed for high precision and high output through a special method, despite its compact size, and has gained popularity as the definitive model in the small precision category. *For more details, please download the catalog or contact us directly.*

• Pressure Control
• Torque Control
• Converters and Transducers

It is widely used as an industrial measurement system for process control, machine tools, presses, etc., in combination with industrial instruments, as well as for general experimental research. Using special stainless steel, it is not affected by corrosive gases or liquids. 【Features】 ● Compact, lightweight, and easy to install ● High precision and high reliability ● Not affected by corrosive gases or liquids 【Customizable Elements】 ● Changeable mounting screws ● Waterproof type available ● Capable of negative pressure calibration *For more details, please download the catalog or contact us directly.

• Pressure Control
• Torque Control
• Converters and Transducers

It is designed to be easily installed even in locations with space constraints due to its compact and lightweight design. It is widely used as a load cell for testing machines, pressure presses, riveting machines, and experimental research. It is commonly used as a small load cell dedicated to compression. 【Features】 ● Compact, lightweight, and high precision ● Made of all stainless steel, excellent corrosion resistance ● The low height of the load cell allows for easy installation in tight spaces 【Custom Options】 ● The load receiving part can be made with a male thread ● Some modifications to the bottom mounting hole are possible ● Mounting flanges can be added as an option ● Waterproof version available *For more details, please download the catalog or contact us directly.

• Pressure Control
• Torque Control
• Converters and Transducers

It can be easily installed on existing small presses and is widely used for determining the quality of pressed molded products and managing the load during pressing up to a certain stroke. There are four mounting holes on both end faces, allowing for the installation of the upper ram and the punching die via flange connections. *For more details, please download the catalog or contact us directly.*

• Pressure Control
• Torque Control
• Converters and Transducers

Due to the use of a flush diaphragm on the pressure receiving surface, the converter has no pressure volume and boasts high responsiveness. It is even smaller than the PHC type and is made of special stainless steel, making it sufficiently resistant to corrosion.

• Pressure Control

It converts the pulse signal from the flow meter into an analog linear output of 4-20mA or 0-10VDC. The FPC series pulse/analog converter is an isolated converter with a 5-digit LED monitor. Settings and adjustments can be made while viewing the monitor, and no special setting device or PC is required. The monitor can switch between displaying instantaneous flow and linear output (analog output). It is equipped with a standard power supply for the sensor (DC12V 50mA). It is low-cost. *For details, please download the catalog or contact us directly.*

• Flow Meter
• Display
• Flow Control

This document is the instruction manual for the 4-channel input integrator "FM34 Series" handled by Japan Tescon Co., Ltd. It includes precautions for use, terminal arrangement, specifications, various operating methods, and how to switch functions between the counter and timer. [Contents] ■ Precautions for use ■ Error display ■ Installation method ■ Terminal arrangement and specifications ■ C: Parameter list for the counter *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments