藤川伝導機 List of Products and Services

The "BLE Series" is a brushless motor equipped with standard functions necessary for speed control. Through feedback control, it achieves a wide speed control range of 100 to 4000 r/min (speed ratio 1:40). Additionally, when used in combination with the data setter "OPX-2A" or the support software "MEXE02," its performance and functionality are enhanced. Furthermore, the speed variation rate (against load) is ±0.5%. Even when the load conditions change, it can drive stably at speeds ranging from low to high. 【Features】 ■ Speed control range: 100 to 4000 r/min (speed ratio 1:40) ■ Energy-saving ■ Slim and high power ■ Excellent speed stability ■ Capable of speed control during upward and downward driving *For more details, please download the PDF or feel free to contact us.

• Brushless DC Motor

The "IP-compatible connection cable" is a connection cable that connects the brushless motor "BMU series/BLE2 series" with the driver. It connects the power line and signal line with a single connector. This eliminates cable branching at the relay section and exposure of lead wires, ensuring dust and water resistance. Additionally, there are two types of connection cables available for the driver side: standard connector type and panel connector type. The panel mount type is suitable for panel installation. 【Features】 ■ Uses IP66/IP67 compliant relay connectors ■ Noise-resistant structure ■ Convenient panel mount type for panel installation *For more details, please download the PDF or feel free to contact us.

• cable

The "BLV Series R Type" is a brushless motor that pursues high output and compact size. Both the motor and driver have achieved significant miniaturization and weight reduction. The driver is approximately 80% more compact compared to conventional products, making it suitable for limited spaces within devices. Additionally, it can drive larger inertia loads compared to conventional products, enabling the transportation of heavy objects and contributing to compact and high-power device design. 【Features】 ■ Contributes to compact design of devices with small size, lightweight, and high power ■ Smooth operation, current position acquisition, and positioning operation are possible ■ Expanded operating voltage range makes battery power sources more user-friendly ■ Compatible with Modbus (RTU) and CANopen communication ■ Support software MEXE02 assists with startup, operation, and maintenance ■ Sequence function simplifies the main program *For more details, please download the PDF or feel free to contact us.

• Brushless DC Motor

The "BLS Series" is an eco-friendly motor that fulfills the desire for a more compact and simpler usability. With a DC24V input brushless motor and a small driver, it reduces component costs, occupied space, and wiring efforts within the control panel. Additionally, it can use the same gear head as AC motors, making it easy to change motors without altering the equipment. 【Features】 ■ More cost reduction ■ More compact ■ More simplicity ■ More reliability *For more details, please download the PDF or feel free to contact us.

• Brushless DC Motor

We would like to introduce our "worm gear head." Despite being compact and low-profile, it allows for approximately three times the permissible torque compared to parallel axis gear heads. It is recommended for applications that require high torque at low speeds or when you want to miniaturize (lower the height) the mechanism. Additionally, it can be directly connected to the drive shaft through a hollow shaft, allowing for a reduction in components such as couplings and belt pulleys. 【Features】 ■ Applicable motor: Brushless motor parallel axis gear head 30W ■ Permissible torque is about three times that of parallel axis gear heads ■ Self-locking for load retention applications that require prevention of falling due to its own weight ■ Space-saving with orthogonal axis/hollow shaft *For more details, please download the PDF or feel free to contact us.

• Other machine elements

Our company offers solution proposals for transport robots. Efforts toward the automation and labor-saving of relatively simple "material handling tasks" are accelerating, and the introduction of transport robots (AGV/AMR/GTP) is being promoted as a solution. The brushless motors "BLV Series R Type/BLH Series" can be battery-powered, making them suitable for use in the axles of transport robots and the transport devices mounted on them, contributing to the support of various driving patterns and transported items required in different environments. 【Features】 ■ Low-profile, slim design ■ High load-bearing capacity ■ Setting and fine-tuning of stop positions ■ Straight driving, avoidance, and stopping *For more details, please download the PDF or feel free to contact us.

• Brushless DC Motor

"MRC01" is a robot controller that allows for easy introduction and control of robots in three steps: "initial setup," "motion programming," and "operation confirmation." It can control self-made robots using small robots like "OVR" and actuators from the "αSTEP AZ series/AZ series." Additionally, it is equipped with convenient features that utilize information on the position and angle of workpieces obtained from a camera to operate the robot. 【Features】 ■ Easy introduction of robots into existing systems ■ Simple setup even for first-time users ■ Automation of more advanced tasks with integration features for 2D cameras *For more details, please download the PDF or feel free to contact us.

• controller

"OVR" is a simple and compact industrial robot. Its installation area is 130mm x 130mm (excluding OVR4088K5-V), and it uses aluminum alloy for the arm material, achieving lightweight design. Due to its small size and light weight, it can be combined with an electric slider to expand the horizontal operating range. Additionally, we offer a robot controller unit "MRCU series" for easy control of this product, as well as the robot controllers "MRC01/MRC01-C." [Features] - A simple industrial robot driven by the αSTEP AZ series - Automation achieved by controlling it with an intuitive robot controller - Maintenance costs reduced by allowing for the replacement of motors and arms *For more details, please download the PDF or feel free to contact us.

• Other industrial robots

The "DRLII series" is a compact electric cylinder that integrates a stepping motor and a ball screw to achieve linear motion. The driver features a built-in type with high functionality and flexibility in system configuration, supporting FLEX-compatible positioning functions. This contributes to the miniaturization of devices by reducing mechanical components such as couplings and enhances device performance with high-precision positioning. We offer a lineup including the "guide type," which allows for easy direct attachment of loads, and the "table type," which enables transport while keeping the height of moving parts low. 【Features】 ■ High-precision positioning ■ Uses a stepping motor that stops precisely ■ Three types to choose from based on application *For more details, please download the PDF or feel free to contact us.

• cylinder

The "DGII Series" is an integrated product that combines a hollow rotary table and motor, allowing for the direct attachment of large inertia discs and arms. The interior of the actuator features a reduction mechanism, enabling high-output drive. Additionally, the hollow output table employs cross roller bearings, achieving high output and high rigidity. The output table allows for the direct attachment of device tables and arms, reducing the effort and costs associated with mechanism design, parts procurement, and belt tension adjustments compared to using mechanical components like belts and pulleys. 【Features】 - Reduction of effort in parts procurement, mechanism design, and assembly adjustments - Hollow output table with a maximum hollow diameter of Φ100mm - Maximum allowable torque of 50N·m - Maximum allowable axial load of 4000N - Repeat positioning accuracy of ±15 arcsec (±0.004°) *For more details, please download the PDF or feel free to contact us.

• Actuator

We would like to introduce the "Electric Slider/Cylinder" that we handle. The electric sliders include the "EZS Series" with a simple dust-proof structure and the compact "EAS Series." For electric cylinders, we offer the high-precision "EZSH Series" and the high-rigidity "EAC Series." Since the motor, frame, guide rails, guide blocks, ball screws, and other components are selected and assembled, it is possible to reduce the design time and equipment startup time for our customers. 【Features】 <Electric Slider> ■EZS Series: Flat, high rigidity, simple dust-proof structure ■EAS Series: Narrow width, compact, high rigidity <Electric Cylinder> ■EZSH Series: High speed, high precision, long stroke, simple dust-proof structure ■EAC Series: Compact, high rigidity, high thrust *For more details, please download the PDF or feel free to contact us.

• cylinder

The "LJ Linear Head" utilizes the αSTEP AZ series in its motor section, enabling high-precision positioning as well as the transportation of heavy loads up to 200kg through a rack and pinion system. It features a simple structure where a parallel axis gear head can be inserted into the linear head and secured with screws, making installation on devices and motor maintenance easy. Additionally, we offer two types of the "L Series" with mounting angle dimensions of 60mm and 80mm. 【Features】 ■ Achieves a maximum load capacity of 200kg in a compact size ■ Contributes to design efficiency ■ Reduces effort in design, assembly, and maintenance *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "L Series" is a rack and pinion system equipped with an AC speed control motor, achieving speed control at a reasonable cost. It easily converts the rotational motion of the motor into linear motion. The linear motion mechanism is designed to be compact while being processed with high strength, allowing it to carry large loads. Additionally, by adopting this product, it is possible to reduce the number of components used compared to self-manufacturing and significantly decrease the labor required for design and assembly. 【Features】 ■ Easily construct a compact linear motion mechanism ■ Shorten the time from design to startup of the equipment ■ Achieve reasonable speed control for raising and lowering ■ Three variable speed ranges to choose from according to usage ■ Available with a maximum stroke of 1000mm ■ A compact body with rich functionality *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "EH Series" is an electric gripper that incorporates a battery-less absolute sensor built into the αSTEP AZ series drive motor. It achieves delicate gripping by finely adjusting the gripping force in 1% increments and approaching the workpiece at low speeds. Additionally, drivers compatible with various FA networks are available. It is suitable as an end effector for devices and robots controlled by a single network. 【Features】 ■ Approaches a wide variety of workpieces with "delicate gripping" ■ Compact and lightweight gripper designed with robots in mind ■ Differentiates between "gentle and soft" and "firm and strong" gripping ■ Functions as a network-compatible end effector ■ Equipped with the αSTEP AZ series drive motor *For more details, please download the PDF or feel free to contact us.

• Other industrial robots

The "DRLII series" is a compact electric cylinder that can significantly reduce design man-hours and time. By integrating a stepping motor and a ball screw, it achieves linear motion. It contributes to improved device performance through miniaturization of the equipment by reducing mechanical components such as couplings and high-precision positioning. Additionally, we offer drivers for the "CVD series," which includes pulse input type and RS-485 communication type. 【Features】 ■ High-precision positioning ■ Uses a stepping motor that stops precisely ■ Three types available to choose from based on application *For more details, please download the PDF or feel free to contact us.

• cylinder

The "DR/DRS2 series" is a compact electric cylinder suitable for high-precision positioning and fine feeding. With a compact body that integrates αSTEP and a ball screw, it contributes to the miniaturization and space-saving of equipment. The reduction in weight at the device's tip is expected to enhance design flexibility. Additionally, the microstepping drive and smooth drive function suppress vibrations at low speeds, allowing for smooth movement. [Features] - Structure that integrates αSTEP and ball screw - Stable fine feeding capability - Smooth movement at low speeds - Contributes to miniaturization and weight reduction of equipment - Reduces the time required to set up the equipment *For more details, please download the PDF or feel free to contact us.

• cylinder

The "DH Series" is a hollow rotary actuator that employs a hollow flange with a 5-phase stepping motor. It can achieve high-precision positioning and stable repetition of fine movements. When combined with a CVD driver, it enables micro-stepping drive and smooth drive functions, resulting in smooth operation with reduced vibrations during low-speed operation. Additionally, since the hollow flange does not use transmission mechanisms such as couplings or belts, there is no impact on precision due to the rigidity of components or assembly errors. 【Features】 ■ Hollow design simplifies piping and wiring at the device's tip ■ Flange mounting contributes to a reduction in components around movable parts ■ Achieves high-precision positioning *For more details, please download the PDF or feel free to contact us.

• Actuator

This catalog is a comprehensive catalog of "flow meters" handled by our company. It includes "electromagnetic flow meters" suitable for applications requiring sanitary conditions such as food, beverages, and pharmaceuticals, "differential pressure flow meters" compliant with SIL2 safety instrumentation, and "air management flow meters" equipped with leak detection functions that contribute to energy conservation. Additionally, we also introduce gas flow monitors and digital mass flow controllers, making it a useful reference when considering implementation. Please take a look. [Featured Products] ■ Electromagnetic Flow Meters ■ Differential Pressure Flow Meters ■ Differential Pressure Flow Meters (for gases and steam) ■ Vortex Flow Meters ■ Thermal Flow Meters *For more details, please download the PDF or feel free to contact us.

• Flow Meter

The "Ozack MF Series" is a linear bearing that achieves a clean environment without the need for grease leakage measures. It features special seals all around, excelling in dust and oil supply, and the newly developed seal structure has minimized grease leakage to the utmost limit. Additionally, the standardization of rust-resistant types makes it suitable for use in environments where corrosion resistance is required. Furthermore, improvements in grease sealing and sealing performance have resulted in quieter operation. 【Features】 ■ High reliability ■ Oil-free ■ Rust-resistant ■ Sealing performance ■ Quiet operation *For more details, please download the PDF or feel free to contact us.

• Bearings

The "HG-TQJD type" is a damper torque hinge with one-way and torque adjustment functions. It can stop lids or doors in any position during opening and closing, and allows for changes in the speed at which they close. Since almost no reverse torque is generated, it can be operated smoothly. We offer two types to choose from for installation: "top-mounted specification" and "inner back plate specification." Please feel free to consult us when placing an order. 【Solutions for these concerns】 ■ Gas springs open too much ■ Standard torque hinges may allow the mouth to open when closing ■ Want to open more than 90° but installing a stopper is cumbersome *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The document includes proposals for sustainable factories, such as "optimization," "resource conservation," and "energy saving." It provides detailed information on the air management system that enables visualization of production equipment status, as well as the reduction of pressure in factory lines through local pressurization and local boosting, starting with successful case studies by application. The content is presented with photos and diagrams, making it easy to reference. Please feel free to download it and take a look. 【Contents】 ■ Air Management System ■ Line Pressure Reduction ■ Air Blow Efficiency ■ Energy-Saving Equipment ■ Compact and Lightweight Design ■ Low Wattage *For more details, please download the PDF or feel free to contact us.

• nozzle
• cylinder
• valve

Introducing the all-stainless steel type of the APEX DYNAMICS servo motor reducers from the 'AES/AERS series', which is resistant to rust. It uses NSF-H1 certified food-grade grease. The reduction ratios are abundant, with 21 types for 'AES' ranging from 1/3 to 1/100, and 28 types for 'AERS' ranging from 1/3 to 1/200. We offer a wide variety of sizes and reduction ratios, accommodating both domestic and international motor manufacturers, from small to large. 【Features】 ■ Five frame numbers: 050, 070, 090, 120, 155 ■ A rich selection of reduction ratios (21 types for AES from 1/3 to 1/100, 28 types for AERS from 1/3 to 1/200) ■ Uses NSF-H1 certified food-grade grease ■ Protection rating IP67 ■ Standard delivery time is approximately 3 to 5 weeks after order *For more details, please download the PDF or feel free to contact us.

• Gearbox

"SUZ" is a special urethane wheel that is resistant to metal chips flying around in metal cutting factories. By incorporating high resilience despite its low hardness, it achieves light and smooth mobility. The soft contact prevents damage to the floor surface and also reduces running noise. Additionally, thanks to the oil resistance inherent in urethane material, it can be used in environments where it comes into contact with cutting oil. 【Features】 ■ Chip-resistant wheel ■ Oil-resistant ■ Comfortable mobility *For more details, please download the PDF or feel free to contact us.

• wheel

We would like to introduce our modular "Pallet & Robot Transport Trolley" that we handle. It is suitable for long strokes of over 10 meters in length. We offer three types: the "HST45V" with a maximum load capacity of 1000N (100Kg), the "HST55H" with 2500N (250Kg), and the "HST65H" with 5000N (500Kg). Please feel free to contact us if you have any inquiries. 【Product Lineup】 ■HST45V ■HST55H ■HST65H *For more details, please download the PDF or feel free to contact us.

• Other conveying machines

We would like to introduce our semi-automatic type "Stretch Film Packaging Machine." Newly added to the control box are dials for tension adjustment, upper winding time, and lower winding time. Film tension can be finely adjusted with dial settings. This machine is recommended for those who need precise adjustments to film tension, such as when there are many irregularities on the corners of packages or when it is problematic if the corners of the boxes get crushed. 【For concerns like these】 ■ It is problematic if the corners of the boxes get crushed ■ There is too much weight variation in the packages ■ There are many irregularities on the corners of the packages ■ The packages are lightweight, etc. *For more details, please download the PDF or feel free to contact us.

• Other packaging machines

This catalog introduces various types of mixers and other equipment that we handle. It features "industrial mixer-related equipment" such as the Satake Super Mag Mixer, Satake Floating Mag Mixer, and Satake Multi A Mixer, as well as a wide range of "cultivation equipment" and "classification equipment." The catalog includes images and serves as a useful reference when selecting products. Please feel free to download it and take a look. [Contents] ■ Industrial mixer-related equipment ■ Cultivation equipment ■ Classification equipment ■ Product sections ■ Company overview *For more details, please download the PDF or feel free to contact us.

• Other mixing and mixing equipment

"Bio Quick" is a super powerful cleaner made using alkaline ion water refined from a mysterious gemstone (tourmaline). It is suitable for removing oil stains in various factory settings (machines, floors, walls, windows, etc.), maintaining and cleaning agricultural machinery, as well as cleaning around food production lines and dirt on ships, automobiles, and railway vehicles. With enzyme formulation, it quickly breaks down oil stains. Please feel free to contact us when you need our services. 【Features】 ■ Quickly breaks down oil stains with enzyme formulation ■ Uses D-limonene to enhance cleaning power ■ Refreshing citrus scent *For more details, please download the PDF or feel free to contact us.

• Cleaning agents

We handle "TOYO Oil Seals" from Toyo Oil Seal Manufacturing Co., Ltd. Our lineup includes a variety of seals, starting with the general seals with springs, the "SM type and SO type," as well as the "TM type and TO type," which are effective when grease is filled between the lips, and the "TOP type," which is designed for pressure resistance. Additionally, we also offer "TOYO Fluon," which can be used for oil seals and packing. 【Features】 <SM type and SO type> ■ Lip section: General seals with springs ■ Outer diameter: SM (metal), SO (rubber) <TM type and TO type> ■ Lip section: Seals with a dust lip added to the S type, effective when grease is filled between the lips ■ Outer diameter: TM (metal), TO (rubber) *For more details, please download the PDF or feel free to contact us.

• Sealing
• Food and pharmaceutical standard seals and packing products

The "EASY CLAMP" is a product that allows for quick changes with a single touch. By rotating the block and body sections, it can accommodate the thickness of commercially available mold bases. Additionally, due to its design, the body can be removed simply by loosening the bolt slightly, which helps reduce working time. 【Lineup (partial)】 ■SS type ■S type ■M type ■MA type ■MB type *For more details, please download the PDF or feel free to contact us.

• Vice Clamps

In this catalog, we introduce various types of planetary gear reducers. We provide detailed information on the features of Matex planetary reducers, including unit types and gear head types, as well as design guides and specifications for the reducers. Additionally, we present application examples and design cases, making it a useful reference book. We encourage you to take a look. 【Contents (partial)】 ■ Product features and classifications ■ Unit types ■ Multi-stage combinations ■ Optional items ■ Gear head types *For more details, please download the PDF or feel free to contact us.

• Gearbox

The "YES" is a slim-type workbench equipped with a dust collection device specifically designed for dry powder dust. It is integrated with a dust collector, resulting in minimal pressure loss and eliminating the need for complicated piping, allowing for flexible layout changes. Additionally, maintenance is easy and tool-free. After cleaning with water or brushing, it can be reused. 【Features】 ■ Integration of dust collector and workspace ■ Compact and space-saving ■ High dust collection capability with high-performance filters *For more details, please download the PDF or feel free to contact us.

• Other dust collectors and related products

The "YMS" is an automatic air blow unit, a dedicated option for air blow workstations. It features a high-precision sensor that detects and automatically adjusts the nozzle position to match the air blowing work, with the ability to adjust air pressure as well. Additionally, it only requires a 100V power connection and air connection for installation, making it easy to set up by simply placing it on the ceiling. 【Features】 ■ Improves the efficiency of manual air blowing tasks ■ Easy integration into robotic lines ■ Optimal air blowing effect through positioning *For more details, please download the PDF or feel free to contact us.

• Other machine elements

We would like to introduce the "Honda Flow RA Fabric/RA Belt" that we handle. By impregnating and sintering glass cloth or aramid cloth with fluororesin, and combining it with a special wear-resistant resin on one side or both sides, we have significantly improved wear resistance and slip prevention/grip performance. This product is suitable not only for use in environments that dislike foreign substances such as wear powder but also for manufacturing processes troubled by belt slip on pulleys. 【Features】 - Significantly improved wear resistance and slip prevention/grip performance - Retains the heat resistance of conventional products - Composite on one side only is also possible - Different surface conditions on the front and back can be achieved - Complies with food sanitation law standards *For more details, please download the PDF or feel free to contact us.

• Belts and pulleys
• belt

We would like to introduce the "Honda Flow LL Fabric/LL Belt" that we handle. The Honda Flow Fabric, which is impregnated and baked with fluororesin on glass cloth and aramid cloth, significantly improves its resistance to permeation and durability of release performance. It is suitable for environments such as food manufacturing processes, like hamburger production lines, where a lot of grease adheres, and where long-lasting release performance against molten resins is required. 【Features】 ■ Excellent prevention of permeation by animal and vegetable oils ■ Significantly improved durability of release performance compared to our conventional products ■ Heat resistance maintains the performance of our conventional products ■ Complies with food sanitation law standards *For more details, please download the PDF or feel free to contact us.

• Belts and pulleys
• belt

We would like to introduce our slim electric cylinder series 'EC-CRP/CGD/CTC' that we handle. It is equipped with a compact controller board that fits into the main body. It features a powerful AC24V hollow servo motor designed specifically for this purpose. You can choose from three types according to your application: the rod without guide "EC-CRP," the rod with double guides "EC-CGD," and the compact table "EC-CTC." 【Lineup】 ■EC-CRP3 ■EC-CRP5 ■EC-CGD3 ■EC-CGD5 ■EC-CTC3 ■EC-CTC5 *For more details, please download the PDF or feel free to contact us.

• cylinder
• Actuator

We would like to introduce our teaching boxes 'TB-03E/03P/02E/02P' that we handle. The touch panel teaching box is equipped with a power supply unit for driving. It can operate actuators using only AC100/200V power. By using this product, the teaching box can supply the driving power, allowing for brake release, trial operation, and data setting even before electrical wiring work is completed. 【For such concerns】 ■ I want to install the actuator, but it won't move because the brake is engaged. ■ I want to make adjustments, but I can't teach because there is no power supply. ■ I need to expedite the startup, but the machine and electrical work are being done in separate locations. *For more details, please download the PDF or feel free to contact us.

• Actuator

We would like to introduce our scalar robot 'IXA'. By enhancing rigidity and optimizing control, vibrations during positioning stops have been significantly reduced. You can choose from a lineup that fits your needs, with arm lengths ranging from 180 to 1000. Additionally, it comes standard with a battery-less absolute encoder. This eliminates the need for battery replacement, reducing maintenance labor. 【Features】 ■ Achieves one of the fastest cycle times ■ Realizes low cost ■ Minimal vibrations and stable positioning ■ Extensive lineup ■ Comprehensive options for wiring and piping assistance *For more details, please download the PDF or feel free to contact us.

• SCARA Robot

We would like to introduce our ultra-fine size electric cylinder 'EC-S2/RR2'. It features a built-in controller and is compatible with a battery-less absolute encoder. The slider/radial cylinder incorporates an in-house linear guide. By adopting a φ6 ball circulation screw, the speed does not decrease even with a maximum stroke of 300mm. 【Lineup】 ■EC-S2 ■EC-S2□R ■EC-RR2 ■EC-RR2□R *For more details, please download the PDF or feel free to contact us.

• cylinder

We handle the rotary type electric cylinder 'EC-RTB4・EC-RTC9/12/18'. The electric cylinder allows you to set acceleration (A), speed (V), and deceleration (D) numerically, enabling smooth stops without impact by adjusting the deceleration. The compact rotary model "EC-RTB4" minimizes the footprint by vertically positioning the built-in motor. 【Features】 ■ Smooth stops without impact ■ Bolt mounting from the top is possible ■ Easy teaching with Rimospi ・No cable connection required ・Operable from a distance ・Up to 16 axes can be connected *For more details, please download the PDF or feel free to contact us.

• cylinder

The "EC-(D)B6S/(D)B7S/B8S/B8SS" is a belt-driven type electric cylinder. By selecting a battery-less absolute encoder, the origin return operation is unnecessary. (B8SS is standard equipped) Since it is equipped with a mechanical position detection mechanism, there is no need for battery backup of position information. 【Features】 ■ Two-point positioning ■ Built-in controller ■ Belt Driven Type ■ Suitable for long-distance inter-process transport ■ No speed reduction due to stroke *For more details, please download the PDF or feel free to contact us.

• cylinder

We would like to introduce our gripper type electric cylinder 'EC-GRB□/GRC□/GRST□' that we handle. It features easy setup completed in 4 steps. Since it can be finely adjusted with numerical values, it can also accommodate workpieces that are prone to deformation. We offer a flat type 'EC-GRC' with a height of 30/35mm, a vertical type 'EC-GRB' suitable for combination shafts, and a long stroke & high rigidity type 'EC-GRST'. 【Setup Steps】 ■1. Check the pressing ■2. Set the pressing force ■3. Set the standby position ■4. Set the pressing start point *For more details, please download the PDF or feel free to contact us.

• cylinder

The "SCON2/SU" is a controller that allows the use of single-axis actuators without safety fences and without the need to cut off the power source. It enables safe collaboration between humans and robots without stopping production. The "SCON2" controller can be connected to actuators equipped with 200V servo motors ranging from 60W to 750W. It has a built-in fan, allowing for installation with a spacing of just 1mm, effectively reducing the installation area in control panels. 【Features】 ■ Achieves functional safety with single-axis actuators ■ Can safely stop without cutting off the power source ■ Allows the use of single-axis actuators without fences ■ Equipped with 14 types of safety functions *For more details, please download the PDF or feel free to contact us.

• Actuator
• controller

This catalog introduces products from Oiles Corporation that comply with the Positive List System under the Food Sanitation Act. It includes filled polyacetal bearings "Lutech F" and filled polyphenylene sulfide bearings "Glitron SF," among others. The Positive List System is a framework that lists substances confirmed to be safe and permitted for use, while prohibiting the use of substances not on the list. [Contents] ■ Revision of the Food Sanitation Act ■ Lutech F (filled polyacetal bearing) ■ Glitron SF (filled polyphenylene sulfide bearing) ■ Fiberflon GH (filled polyester bearing) ■ Glitron F (filled polytetrafluoroethylene resin bearing) *For more details, please download the PDF or feel free to contact us.

• Plastic bearings
• bearing
• Bearings

"Oiles Fiberfron GH" is a bearing made of unsaturated polyester resin reinforced with a special fiber woven fabric filler. As it is a high-strength fiber-reinforced material with self-lubricating properties, it can replace traditional metal bearings that require lubrication without the need for oil. It uses low-swelling unsaturated polyester, providing excellent dimensional stability. Additionally, due to the special fibers and additives, it excels in load-bearing capacity and wear resistance. 【Features】 ■ Can be used without lubrication ■ Usable in the atmosphere, underwater, and in seawater ■ Excellent low friction, wear resistance, and load-bearing capacity ■ Forms a lubricating film even with slight movements, demonstrating excellent friction performance ■ Low water absorption characteristics result in minimal dimensional changes due to swelling, ensuring excellent dimensional stability *For more details, please download the PDF or feel free to contact us.

• Plastic bearings
• bearing
• Bearings

"Oiles Biomass Plastic Bearings" are high-performance plastic bearings with a high biomass content. We offer "Oiles #83-B1" with a biomass content of over 45% and "Oiles #81-B1" with over 90%. In the future, a proactive shift from existing petroleum-based plastic products to biomass plastics is expected across various industries. 【Features of Oiles #83-B1】 ■ Usable without lubrication ■ Excellent dimensional stability due to low water absorption characteristics ■ Outstanding friction performance under a wide range of conditions, from low to high loads and low to high speeds ■ Can serve as an alternative to polyacetal (POM), which is widely used as a sliding product *For more details, please download the PDF or feel free to contact us.

• Plastic bearings
• bearing
• Bearings