藤川伝導機 Product Lineup

We would like to introduce our "Valve Seat Surface Runout Measuring Tool." By adopting a unique reference bar method, it is possible to easily measure the surface runout (concentricity) of the seat surface based on the valve guide hole in the engine and cylinder head. If the diameter of the valve guide hole is the same, it can accommodate many workpieces with just an adjustment at the dial gauge mounting part. 【Features】 ■ Reduces variability caused by the operator ■ The reference bar expands to a zero gap state against the finished diameter of the guide hole (0.05φ tolerance range), allowing measurement without being affected by the hole diameter ■ Easy maintenance ■ A series with improved rigidity and stability is also available *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

We would like to introduce our "solid grease bearings." The operating temperature is -20 to 80°C. The solid grease uses NSF H1 certified food machinery grease and resins that comply with FDA standards. By filling the internal volume of the bearing with solid grease, it becomes difficult for dust to enter, resulting in a longer lifespan. 【Features】 ■ Filling the internal volume of the bearing with solid grease makes it difficult for dust to enter, resulting in a longer lifespan. ■ Solid grease is retained inside the bearing even in water and humid environments. ■ Solid grease uses NSF H1 certified food machinery grease and resins that comply with FDA standards. ■ Operating temperature is -20 to 80°C. *For more details, please refer to the PDF document or feel free to contact us.

• Plastic bearings

The "Model SWE" is a high-power air hole clamp that achieves a compact hand unit, reducing weight and enabling the compactness of transport devices. Thanks to the force multiplication mechanism (wedge), it provides clamping force comparable to hydraulic clamps, and even when the air pressure drops to zero, it remains safe due to the self-locking feature of the force multiplication mechanism and the built-in spring. Additionally, due to the centralized piping in the flange section, the thickness of the plate can be designed even thinner, and the height can be selected in 5mm increments to match the seating surface of the workpiece. 【Features】 ■ Mounting dimensions tailored to equipment ■ Seating surface height dimensions tailored to the workpiece ■ Various diameter dimensions to match workpiece holes ■ Significantly increased clamping force due to the force multiplication mechanism ■ Cap structure that allows for various protections *For more details, please refer to the PDF document or feel free to contact us.

• Vice Clamps

This catalog introduces peripheral equipment for cleaning systems. It features the high-power air link clamp cleaning type "Model WCJ," including its characteristics, operational explanations, and variations. Additionally, we offer the air speed control valve "Model BZW" and the manifold block "Model WHZ-MD," making it easy to reference when selecting products. 【Contents】 ■ Case studies ■ High-power air link clamp cleaning type Model WCJ ■ Air speed control valve Model BZW ■ Manifold block Model WHZ-MD *For more details, please refer to the PDF document or feel free to contact us.

• Other cleaning machines

In this catalog, we introduce mechanical components for robot frames and peripheral devices. Starting with "robot frames" that combine functionality and design, allowing for a wide range of customizations to suit various applications, we also offer various options for "safety fences" that can be opened and closed in different ways. Additionally, we provide a rich selection of products such as "work stockers" that facilitate smoother transportation between processes and "AGVs and peripheral devices," making it easy to reference when selecting products. Please take a look. [Contents] ■ Robot Frames ■ Safety Fences ■ Work Stockers ■ AGVs and Peripheral Devices ■ Accessory parts convenient for assembling aluminum frames *For more details, please refer to the PDF document or feel free to contact us.

• Other industrial robots

The "Tsubaki Tough Roller" is an endless roller that is suitable for moving heavy objects that are difficult to handle with standard casters in the presence of large equipment. The large steel gate has low rolling resistance, allowing for smooth movement. It is relatively easy to transport, making it usable as a simple conveyor. We offer a "Steel Roller Type" that is compact with a high load capacity, and a "Plastic Roller Type" that uses engineering plastic for the rollers. 【Features】 ■ Low center of gravity ■ Light operation ■ Compact ■ Sturdy ■ Abundant options ■ Choice of roller type *For more details, please refer to the PDF document or feel free to contact us.

• roller

This catalog features the "FA Palette Clamp," "Auto Switch/Proximity Switch for Operation Confirmation," and "High-Precision Cylinder Sensor (Oil-Resistant)." We introduce a wide range of products, including the FA Palette Clamp "Model WVG," which has a repeat positioning accuracy of 0.08mm, and the sensor attachment "Model WVGT." Each product includes detailed information on model specifications, features, and precautions, making it easy to reference when selecting products. Please take a look. [Contents (Partial)] ■ FA Palette Clamp ■ FA Palette Clamp Sensor Attachment ■ FA Palette Clamp Block ■ FA Palette Clamp Related Products ■ FA Palette Clamp Precautions *For more details, please refer to the PDF document or feel free to contact us.

• Vice Clamps
• switch
• Sensors

We would like to introduce the "OZAK Linear Bearings" that we handle. We offer a variety of options including single, double, and triple lengths, as well as round, square, and oval flanged bearing units, rust-resistant types, various grease-filled options, and maintenance-free models to accommodate various applications. Additionally, we also have the Ultra Series, which can withstand harsh specifications and offers ultra-long life. Please feel free to contact us when you need assistance. 【Features】 ■ Wide variety ■ High reliability to low cost based on rank classification ■ Rust-resistant series ■ Series with lubrication holes ■ Maintenance-free series ■ Ultra-long life Ultra series *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings

This catalog introduces various "casters" that we handle. We offer a wide range of products, including the bestselling "420G/415G," which has been loved for many years, the representative fixed casters "420R/420GRP," and the "420E/415E," which is suitable for equipment that requires design and lightness with its chrome-plated finish. We have also included dimension tables and images of the wheels, making it a useful reference when considering implementation. We encourage you to take a look. 【Featured Products (Partial)】 ■420G/415G 25-75mm ■420R/420GRP 25-75mm ■420E/415E 40-75mm ■420E/415E 85-150mm ■420ER/415ER 40-75mm *For more details, please refer to the PDF document or feel free to contact us.

• caster

We would like to introduce the plates "F-S50C/F-S55C" that we handle. These are high carbon steels with high strength among carbon steels (carbon steel materials for mechanical structures). To minimize the difference in characteristic values due to thickness, we apply JIS S50C equivalent for thicknesses of 25mm or less, and JIS S55C equivalent for thicknesses of 28mm or more. We also offer "F-S55C block material" made from carefully selected steel. 【Features】 <F-S50C/F-S55C Plates> ■ High carbon steel with high strength among carbon steels (carbon steel materials for mechanical structures) ■ To minimize the difference in characteristic values due to thickness, we apply JIS S50C equivalent for thicknesses of 25mm or less, and JIS S55C equivalent for thicknesses of 28mm or more ■ Standard plates made from carefully selected steel *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

This catalog introduces "logistics and transportation equipment," starting with dollies. We offer a wide variety of products suitable for transporting construction materials, such as the "MTR Aluminum Dolly," the "MTW Folding Dolly with Brakes" that can store casters, and the compact dolly "KWK Osamarukun" that also folds casters. Product features are also presented with photographs, making it a useful reference when considering implementation. We encourage you to take a look. 【Featured Products (Partial)】 ■ MTR Aluminum Dolly ■ MTRM Aluminum Dolly (4-wheel caster version) ■ MTW Dolly (Folding Dolly with Brakes) ■ KWK Dolly (Osamarukun) ■ KHE Dolly (Fifty Cart) *For more details, please refer to the PDF materials or feel free to contact us.

• Trolley

We would like to introduce our company's concentric swivel wheels for curved rails, the "Curve Caster." These concentric swivel wheels are designed to run smoothly along curved rails or lines made from materials such as rails or square bars, allowing for forward and reverse movement. The fittings are made of ductile iron, and the wheels are made of S45C for sizes 50C to 75B, and strong ductile iron for sizes 100B to 250A. Additionally, if the wheels are used frequently, we can equip them with hardened outer surface wheels. Please specify your desired usage conditions when making a request. 【Features】 ■ Smooth rotation ■ Concentric swivel wheels capable of forward and reverse movement ■ Option to equip with hardened outer surface wheels *For more details, please refer to the PDF materials or feel free to contact us.

• caster

We would like to introduce our "High-Performance Drive Chains." Utilizing a rich variety of products and high maximum allowable tension, these chains are widely used for compact and powerful transmission and suspension applications. Our lineup includes the "Super Chain," which boasts high transmission capability, and the "Power Chain," known for its high tensile strength. Additionally, we offer the "Super H Chain," which has high fatigue strength, and the "Ultra Super Chain," which allows for a two-size reduction of RS roller chains. 【Features】 <Super Chain> ■ High transmission capability ■ High shock absorption ■ Allows for a one-size reduction of RS roller chains *For more details, please refer to the PDF document or feel free to contact us.

• Chains and sprockets

This catalog introduces the "Cable Bay Clean Series." Starting with the "Clean Bay," which uses a fluororesin pod, we also feature the unique self-supporting flat cable system "Flat Bay," and the "Cable Bay TKR type," which has revamped its link structure to achieve low dust and low noise. We have included application examples along with images, making it a useful reference when considering implementation. We encourage you to take a look. [Contents (partial)] ■ Application examples ■ Clean Bay ■ Flat Bay ■ Cable Bay TKR type *For more details, please refer to the PDF document or feel free to contact us.

• cable

We would like to introduce the "LiniSpeed Jack" that we handle. This product can respond to high-speed ranges without changing the frame number due to its constant thrust characteristics. It allows for lifting and lowering at a speed of 200mm/s without the constraints of permissible thrust. Additionally, by incorporating the ball nut within the gear case, we can achieve a low-profile design, which helps to reduce the overall height of the equipment. 【Features】 ■ High-speed operation at 200mm/s ■ Improved permissible load duty cycle for high-frequency operation ■ Low-profile design ■ Long lifespan *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "IKO Ball Spline Series" is a linear motion guide device where the outer cylinder moves in a straight line along the spline shaft. There are two types in the lineup: the C-Roove Ball Spline G "MAG Series" and the Ball Spline G "LSAG Series." The structure allows steel balls to roll along the spline grooves, enabling it to handle not only radial loads but also rotational torque. Additionally, it features a compatible system with a free combination specification, allowing for flexible combinations of types, precision, and preload. 【Features】 ■ Compact yet high rigidity ■ High precision for accurate positioning ■ Low friction for smooth operation ■ Combines high-speed durability with maintenance-free performance ■ Free combination specification *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

We would like to introduce our micro precision positioning table 'TM'. By combining a high-lead ball screw with a high-torque AC servo motor, high-speed movement is possible without sacrificing accuracy. The slide table is available in two types: standard table and long table. Additionally, it is possible to specify the built-in sensors for the origin, pre-origin, CW limit, and CCW limit while keeping the external dimensions unchanged. 【Points】 ■ Ultra-small positioning table with a cross-section height of 20mm and width of 17mm driven by a ground ball screw ■ Achieves a maximum table speed of 75mm/s ■ Table specifications can be selected according to application ■ Optionally, ultra-small sensors can also be built-in *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

We would like to introduce our high-performance hypoid gear reducer, the 'KH/KF series.' The output shaft of this product rotates in the same direction as the servo motor, making machine control and installation easy. There are various output types available. Additionally, it features a customizable design with an optimized moment of inertia. Please feel free to contact us for inquiries. 【Features】 ■ Innovative hypoid helical bevel gear ■ Optimized moment of inertia ■ High-performance positioning ■ High durability ■ Customizable installation *For more details, please refer to the PDF document or feel free to contact us.

• Gearbox

We would like to introduce the "Bearingless Pulley" that we handle. It uses a material called "Vestal G," which combines excellent sliding properties and wear resistance. This prevents belt misalignment and damage caused by rust from cleaning, foreign object entrapment, and operational failures due to corrosion. Additionally, since there is no need to incorporate bearings, the number of parts is reduced, allowing for cost reduction of the product. 【Benefits】 ■ No parts ■ No defects ■ No oil *For more details, please refer to the PDF document or feel free to contact us.

• Belts and pulleys

We would like to introduce our compressed air dehumidification and purification device, the "Dry Separator." The compressed air sent from the compressor is processed within this product by a cyclone (high-speed rotating airflow), which separates and removes impurities (such as moisture and oil) that are heavier than air, delivering high-quality compressed air. By removing drains, impurities, and moisture, the occurrence of machine troubles is reduced, and the symptoms during troubles become milder, leading to an increase in machine operating rates. 【Features】 ■ Excellent durability and outstanding reliability ■ Extremely economical mechanism ■ Easy installation, environmentally friendly *For more details, please refer to the PDF document or feel free to contact us.

• Air purifiers
• Dehumidifier

We would like to introduce our "Warm Winter Vest with Dual-Sided Heater." The heating element uses flexible micro carbon fiber heaters in a fibrous form. It wraps your upper body warmly in about 20 seconds without any discomfort when worn. Additionally, both sides are made with stretchable material, allowing it to fit well whether worn as an outer or inner layer, while being lightweight and easy to move in. 【Features】 ■ Instant warming effect ■ Easy operation ■ Thin, lightweight, and comfortable fit ■ Hand washable *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters

We would like to introduce the "Servo Motor Compatible Cables" that we handle. By adopting high-quality, low-cost wires and connectors, we achieve cost reduction while ensuring quality. You can specify the cable length in 10cm increments, from a single unit to large lots, according to the manufacturer's recommended specifications. Additionally, our company delivers products and services with speed as our motto. Please feel free to contact us when you need assistance. 【Reasons to Choose Us】 ■ Point 1: Affordable ■ Point 2: Reliable ■ Point 3: Fast *For more details, please refer to the PDF document or feel free to contact us.

• cable

The "Air Hydro Unit" is a product that can easily generate hydraulic pressure simply by supplying air from the factory to the unit. Equipped with a non-leak valve, this product can maintain hydraulic pressure and keep the actuator's state even if the air supply is interrupted due to power outages or other reasons. Additionally, the air-driven hydraulic pump installed in this product offers a wide range of variations, capable of discharging a broad spectrum of pressures from low to high. 【Features】 ■ Easily generates low to high hydraulic pressure ■ Safety ■ Energy efficiency ■ Abundant variations *For more details, please refer to the PDF document or feel free to contact us.

• Hydraulic Equipment

We would like to introduce our air expansion locate pin, 'Model VWH'. It has a large clearance during contraction, making it easy to accommodate automation such as robot transport. Precision measurement of pitch intervals can be performed at the coaxial part of the tip. Additionally, air blowing from inside the cylinder is discharged through the gaps of the gripper, preventing the intrusion of foreign objects from the outside. 【Features】 ■ Large expansion amount ■ Easy to accommodate automation and robots ■ Easy inspection of mounting position accuracy ■ Durability *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

This catalog introduces "Aluminum Frame Joint Parts," starting with the "Joint System PJ Type." It features a wide range of products, including "Stainless Steel AS Nuts" for securing components to the aluminum frame and "Stainless Steel Panel Fixing Intermediate Brackets" used to prevent panel flapping. Examples of installation and methods are also included with photos and diagrams, making it a useful reference when considering implementation. We encourage you to take a look. 【Featured Products】 ■ Joint System ■ Nuts ■ Brackets ■ Corner Caps ■ Packing ■ Fastening Components for Panels *For more details, please refer to the PDF document or feel free to contact us.

• joint
• bracket
• nut

The "Film Gripper Chain" is a high-performance product designed for transporting sheets and films, equipped with a special attachment for horizontal rotation. To ensure precise positioning, it utilizes a highly reliable clamping mechanism. This allows for optimal feeding of the raw material (film), resulting in a smoother production line. Additionally, a preload (constant load) is applied after the chain assembly, minimizing the initial elongation of the chain after operation. 【Features】 ■ Excellent functionality ■ Superior grip performance ■ Quick and stable start of operation ■ Outstanding cost performance *For more details, please refer to the PDF document or feel free to contact us.

• Chains and sprockets

We would like to introduce the "Zip Chain Actuator" that we handle. Since the zip chain can be stored in a compact case, it achieves outstanding space-saving compared to conventional linear actuators. It supports high-speed and high-frequency operation, and significantly reduces power consumption compared to oil and pneumatic cylinders. Additionally, we offer the "Zip Chain Lifter," which can directly transmit lifting force, and the "Zip Master," which integrates the zip chain, linear guide, and motor. 【Features】 <Zip Chain Actuator> ■ Compact ■ High-speed ■ Multi-point stop ■ Long lifespan ■ Free installation direction *For more details, please refer to the PDF materials or feel free to contact us.

• Actuator

We would like to introduce the Sakai continuously variable transmission 'T Series' that we handle. Equipped as standard with a new automatic pressure device that prevents belt slippage even when an unexpected overload occurs, up to 150% of the rated load. When under heavy load while increasing speed or when rotating in reverse, and during intermittent impact loads, it instantly demonstrates constant output characteristics, generating the necessary torque and completely preventing belt slippage. 【Features】 ■ Instantaneous constant output characteristics ■ Significant reduction in maintenance costs ■ Thorough pursuit of mechanism reliability, durability, safety, and ease of use *For more details, please refer to the PDF document or feel free to contact us.

• Transmission

We would like to introduce our casters '420 BBE/413 BBE/420 BER'. These products feature a "silent" mechanism that reduces noise generated during turning and movement. They are suitable for use in environments that require low noise, such as office buildings and indoor warehouses. In addition, we have a wide range of products including '420 BBS/417 BBS/420 BBR' and '420 BBS/413 BBS/420 SR/420 SRP'. Please take a look at our catalog for more information. 【Features】 ■ RoHS compliant ■ Flat mounting ■ Wheel lock ■ Side stopper ■ Steel *For more details, please refer to the PDF document or feel free to contact us.

• caster

We would like to introduce the "Vankimpuri" that we handle. This V-pulley is designed with rigidity through the rotational molding method, making it suitable for light to medium load transmission in general industrial machinery. The grooves of the pulley are designed to have a rounded shape, eliminating sharp edges, which prevents damage to the belt. 【Material and Finish】 ■Disk: SPCC, electrostatic coating (NBK Blue) ■Hub: FC200, electrostatic coating (NBK Blue) ■Bolt: 10B22M *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

We would like to introduce our "Standard Sprockets." We offer single-row Type A, double-row Type B, and custom-made Type C products. The new Type B and new BW sprockets comply with RoHS directives and are compatible with shaft hole processing or cut link systems. Additionally, we also have "Tooth Surface Hardened BW Sprockets" and "Completed Shaft Hole Type B Sprockets" in stock. Please feel free to contact us with any requests. 【Product Lineup】 ■ Type A ■ Type B ■ Type C ■ Type B2 *For more details, please refer to the PDF materials or feel free to contact us.

• gear

We would like to introduce "Banno Metal," which we handle. The material is made of NKS high ductile (FCD600), which is strong and can be processed with a dimensional ratio of 7/10 to 8/10, allowing for miniaturization. The base surface and mounting seat have been processed, and the mounting holes are cast in an oval shape, making it easy to select according to your needs, whether it be bronze, nylon, oil-less, or dry bearings. Additional processing of only the shaft hole section can easily complete the product. 【Features】 ■ Made of high ductile material ■ Capable of miniaturization ■ Easy to complete the product with additional processing of only the shaft hole section *For more details, please refer to the PDF materials or feel free to contact us.

• Other machine elements

This document explains the handling of roller chains and sprockets. It provides detailed and easy-to-understand information on cutting and joining roller chains, lubrication, arrangement, and installation, using images and diagrams. Cutting the roller chain to the required length is necessary. This document serves as a useful reference, so please take a moment to read it. [Contents (partial)] ■ How to cut roller chains ■ How to join roller chains ■ Lubrication of roller chains ■ Arrangement and installation of roller chains ■ Sprockets *For more details, please refer to the PDF document or feel free to contact us.

• Technical and Reference Books

We would like to introduce the "Cable Carrier Accessories" that we handle. We offer long-span rails composed of two types of rails: H2M rail (front side) and U2M rail (rear side), as well as cable and hose clamps to prevent damage. Additionally, we also have support rollers and movable cables specifically for cable carriers. Please feel free to contact us if you have any requests. 【Product Lineup】 ■ Long-span rails ■ Cable and hose clamps ■ Support rollers ■ Movable cables specifically for cable carriers *For more details, please refer to the PDF document or feel free to contact us.

• Other cable related products

The "Tsubaki Lift Master" is a product that can be installed as is with a cantilever design. To support cantilever loads (overhang loads), it features a structure that compactly integrates a screw shaft and guide within a high-rigidity frame. Additionally, the cover can be easily removed, allowing for straightforward lubrication of the screw and guide, as well as easy position adjustments using position detection sensors. 【Benefits】 ■ Freedom to layout production lines ■ Easy to handle ■ Improved working environment ■ Energy-saving effects *For more details, please refer to the PDF materials or feel free to contact us.

• lift

The "IKO General Purpose Needle Cage" is a bearing with excellent rotational performance that accurately guides needle rollers through a specially shaped, high-rigidity, and high-precision retainer. It incorporates needle rollers with very small diameter variations and retains them, allowing it to be used in combination with heat-treated and ground-finished shafts and housing holes, taking advantage of the machining accuracy of the raceway surfaces, and making it suitable for use in small spaces. Additionally, it has a large lubricant retention capacity, is lightweight, and has high rigidity, enabling it to withstand harsh operating conditions such as high-speed rotation and shock loads, making it suitable for a wide range of applications. 【Features】 ■ Excellent rotational performance ■ Usable in small spaces ■ Large lubricant retention capacity ■ Lightweight and high rigidity *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings

The "LT Series" is a compact and high-precision positioning table that incorporates an AC linear servo motor between a movable table and a bed, along with a built-in optical linear encoder. With a lightweight movable table and high thrust, it enables high acceleration and high-response operation. Furthermore, advanced servo technology achieves high static stability and speed stability. There are three types available: the compact type CE, the long-stroke type LD, and the high-thrust type H, allowing you to choose the most suitable format for your application. 【Main Product Specifications】 ■ Drive: Linear motor ■ Linear guide device: Linear way (ball type) ■ Built-in lubrication components: Built-in lubrication component "C-Lube" ■ Material of table and bed: High-strength aluminum alloy (only the bed of LT100CE is made of carbon steel) ■ Sensor: Selected by model number *For more details, please refer to the PDF document or feel free to contact us.

• Linear motor

We would like to introduce our "6S Series SUS304 Stainless Steel Bearings." This product uses SUS304 stainless steel, which is widely used as a corrosion-resistant, heat-resistant, and non-magnetic material. It is suitable for corrosive environments where SUS440C stainless bearings may struggle. In addition to standard specifications, we also accommodate special specifications. Please feel free to contact us if you have any requests. 【Features】 ■ Excellent corrosion resistance ■ Non-magnetic *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings

We would like to introduce our "Explosion-Proof LED Floodlight." This LED floodlight is designed for hazardous explosion-proof areas and can be moved and used like a handheld lamp. It complies with the d2G4 standard. The materials used are as follows: the lamp body is made of aluminum alloy die-casting, the front glass is tempered glass, and the guard is made of steel with a resin coating. 【Features】 ■ Pressure-resistant explosion-proof structure (d2G4) ■ Applicable standards: Factory electrical equipment explosion-proof guidelines (Gas vapor explosion-proof 2006) ■ High-output chip-type LED built-in ■ Lightweight and compact with wide-area illumination ■ Equipped with an anti-glare diffusion sheet that does not reduce the center illuminance *For more details, please refer to the PDF document or feel free to contact us.

• Floodlight

We would like to introduce the "terminal blocks" that we handle. We offer rail-mounted and modular push-in terminal blocks, standard interface terminal blocks, screw terminal blocks, special-purpose terminal blocks, and waterproof junction boxes. Additionally, we also have terminal block accessories such as end plates and covers. For more details, please refer to the catalog available for download. 【Product Lineup】 ■ Push-in terminal blocks ■ Interface terminal blocks ■ Screw terminal blocks (rail-mounted) ■ Screw terminal blocks (modular) ■ Special-purpose terminal blocks and waterproof junction boxes ■ Terminal block accessories *For more information, please refer to the PDF materials or feel free to contact us.

• Terminal Blocks

"Bee-1" is a product that automatically inspects tap holes. It conducts a complete inspection automatically, ensuring zero inspection omissions and significantly reducing inspection time. It can continuously inspect screw holes of different depths with information registration for up to 50 locations. Additionally, it can accurately screw in without being affected by the hole position accuracy or tilt of the product, monitoring the floating amount with sensors and measuring screw depth with high precision. 【Features】 ■ Quick inspection ■ Floating mechanism (eccentricity, angle) ■ Freely adjustable inspection torque ■ Highly reliable screw plug gauge ■ System construction (communication with external devices possible): optional *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices

We would like to introduce our "water-resistant grease-sealed bearings." These bearings are ideal for symptoms such as "stopping quickly" or "grease leaking" in water-related applications. They are designed to have a longer lifespan by sealing in water-resistant grease. Additionally, we can manufacture them in small lots with short lead times, starting from just one piece. Please feel free to contact us if you have any requests. 【For the following symptoms】 ■ Stops quickly ■ Grease leaks ■ Brown liquid comes out from inside ■ Frequent replacements *For more details, please refer to the PDF document or feel free to contact us.

• Plastic bearings

We would like to introduce the "Air Hole Clamp" that we handle. Due to the concentrated piping at the flange part, the thickness of the plate can be designed even thinner. You can select the height in 5mm increments to match the position of the workpiece seating surface. Additionally, to accommodate various hole diameters and tolerances, you can choose the workpiece hole diameter in 0.5mm increments. The type without a pull-down function generates only expanding force, minimizing clamp distortion. 【Features】 ■ Mounting dimensions tailored to the equipment ■ Seating surface height dimensions tailored to the workpiece ■ A variety of diameter dimensions to match the workpiece hole ■ Type without pull-down function (optional) ■ Cap structure that allows for various protections *For more details, please refer to the PDF document or feel free to contact us.

• Vice Clamps

We would like to introduce the "High Power Air Link Clamp" that we handle. The High Power Air series demonstrates capabilities equivalent to hydraulic clamps, enabling a hydraulic-free processing jig system. With a holding force stronger than the clamping force, it minimizes the required clamping force, thereby reducing workpiece distortion. It delivers high output even at low pressure. Additionally, we also offer "Air Speed Control Valves" and "Manifold Blocks." 【Features】 ■ Hydraulic-free ■ Holding power ■ Space-saving ■ Energy-saving *For more details, please refer to the PDF document or feel free to contact us.

• Vice Clamps

We would like to introduce our aluminum extrusion handle, the 'ALH type.' It features a design with careful considerations such as anti-slip at the tip and prevention of dust accumulation. The inner side has a grip for fingers, combining both design and functionality. We also offer other types such as the 'HA-NE type,' 'HA-SQS type,' recessed handle 'HH-DN type,' and stainless steel surface-mounted folding handle 'HKM type.' Please feel free to contact us if you have any requests. 【Features】 ■ A design with careful considerations ■ Grip for fingers on the inner side *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements