レックス List of Products and Services

Slick Corporation Transport Vibration Meter

Rex Company Noise and Vibration Display Device

Handheld vibration meter with easy-to-use diagnostic function

JFE Advantech Co., Ltd. Vibration Data Management System

A low-frequency sound level meter that enables real-time analysis of 1/3 octave bands while measuring G characteristic sound pressure levels.

This is a comprehensive catalog of rental measuring instruments featuring over 1,000 models. With a substantial total of 356 pages! There are four key points to help you find the measuring instruments you need. ■ Convenient comparison tables for model selection ■ Special features on measuring instruments by usage scenario ■ A wide range of system-compatible products ■ Calibration and repair services are also available Right now, we are offering the comprehensive catalog for free! << If you are interested, please apply through the contact form >>

The general-purpose vibration meter VM-80 is designed to accommodate a wide range of vibration measurements using a piezoelectric accelerometer as its detector. It features three types of input terminals and a broad sensitivity calibration range, allowing for the use of all kinds of piezoelectric accelerometers. It can measure not only vibration acceleration but also vibration velocity and displacement in three different modes. Measurement results are displayed simultaneously through both a meter indication and a digital display. The digital display compensates for the difficulty in reading due to fluctuations in the pointer, showing the average value over a period of two seconds. 【Features】 ○ The indication characteristics include four types: effective value (true effective value), equivalent peak value, equivalent p-p value, and peak value, all of which can hold the maximum value. ○ It can easily be configured as a 2-channel or 3-channel type using connecting rods. ○ The input circuit uses a charge amplifier, ensuring that changes in the length of the pickup cable do not affect the measurement values. For more details, please contact us.

The Low Frequency Sound Level Meter NA-17 is a level meter that measures low frequency sounds, referred to as low frequency noise and low frequency air vibrations. It is based on the concept proposed by Dr. Yasuo Tokita of the Kobayashi Institute of Physical Science, which considers the frequency range of 1 to 50 Hz as the low frequency sound domain. It has a flat frequency response for indicating the physical characteristics within this range and a frequency response for obtaining evaluations corresponding to psychological effects. 【Features】 ○ Level handling is done using 20log10P/P0, the same as in noise meters. ○ The frequency range for low frequency sound is from 1 Hz to 50 Hz. For more details, please contact us.

The Pocketable Vibration Meter VM-63A is an ultra-compact vibration meter weighing 250g that integrates the pickup and the main body, making it pocket-sized. With a wide-range design, it eliminates the need for range switching, and it has been designed with maximum consideration for operability and functionality as a vibration meter used on-site. It is suitable for a wide range of applications, including maintenance of industrial machinery, product development design, and on-site quality control. For more details, please contact us.

Are you interested in renting the noise and vibration measurement public system EM-130 / EM130S to aim for a safe and secure construction site? We offer the EM130, which can display various messages and illustrations, and the EM130S, which simply displays only noise and vibration! With accurate and easy-to-understand displays, we contribute to a safe and secure environment! For more details, please contact us.

The NL-62 precision sound level meter comes standard with an auto store function and allows for continuous measurement using a timer function or external power supply. It emphasizes ease of use by eliminating the hassle of having to check the manual during measurements. The screen is a large, easy-to-read 3-inch color LCD, and it has added waterproof performance to withstand sudden rain. The Rion NL-62 precision sound level meter maximally supports your measurements. For more details, please contact us.

The portable vibration diagnostic device "Shindo-kun Pro" allows simultaneous multi-point measurement of up to four locations in a single measurement operation. The vibration acceleration signals detected by the vibration sensor are converted into digital data and transferred to a tablet PC. After receiving the data, the internal software of the tablet PC performs signal processing and displays the measurement values and vibration waveforms, etc. For more details, please contact us.

Rex offers the latest global technology information to all customers who require measuring instruments. We have a variety of measuring devices tailored to different scenarios such as concrete diagnostics, radiation measurement, and clean rooms, so please contact us for more details or download the catalog.

We are running a campaign for the rental of various measuring instruments, including a "standard sound level meter" that allows for long-term data recording on CF cards, an "air respirator" that can record continuously for extended periods, and a "wireless vehicle weight scale." If you are considering renting measuring equipment, please feel free to contact us by phone to discuss your purpose and intended use, and our experienced staff will respond promptly to any details.

If you need to rent measuring equipment, you can use it for the necessary period when you need it. Additionally, our company not only provides rentals but also offers comprehensive support from selecting the right model for our customers to after-sales service, so you can use our services with peace of mind. We are currently offering a free catalog! For more details, please download it or contact us.

The "MK-220" is a portable vibration diagnostic device that analyzes the causes of vibration in rotating machinery and supports maintenance operations with its automatic diagnostic function. Despite its convenient pocket size, it employs a 24-bit AD converter, allowing simultaneous measurement in all modes and reducing measurement time. It also features a function for automatically collecting vibration data at regular intervals, making it useful as a continuous monitoring system for 1-channel applications. 【Features】 ■ Fully automatic diagnosis that is reassuring for beginners ■ Supports both touch panel and sheet key inputs ■ Compatible with diagnostics for variable speed equipment ■ Advanced analysis of abnormal factors with a minimum resolution of 0.00078 Hz ■ Various frequency filters *For more details, please feel free to contact us.

The weight impact sound generator 'YI-01' is used to measure the floor impact sound insulation performance of buildings. It is used in lightweight structures when the impact force characteristics of a standard weight impact source (bang machine) are excessive. 【Features】 ■ Lightweight at 2.5kg, making it easy to carry ■ By freely dropping it from a height of 1m, a stable impact force of approximately 1500N (Newtons) can be obtained For more details, please feel free to contact us.

The vibration level meter (with certification) 'VM-55EX' can simultaneously measure instantaneous values of vibration level and vibration acceleration level, as well as time-weighted levels, time-averaged levels, maximum values, and minimum values in three directions. It complies with the certification standards of JIS C 1510:1995, JIS C 1517:2014, and the new standards that came into effect on November 1, 2015. It also supports the vibration measurement manual. 【Features】 ■ Simultaneous measurement of vibration level (Lv) and vibration acceleration level (Lva) ■ Compatible with large-capacity SD cards, up to 32GB ■ Measurement data can be output in CSV format, usable with spreadsheet software like EXCEL ■ The optional program VX-55EX is pre-installed ■ Communication with a computer is possible via USB port and I/O port For more details, please feel free to contact us.

The vibration data management system MAINTE PRO MK-210HEII helps to identify signs of equipment deterioration and causes of abnormalities, predict repair timing, reduce maintenance labor, lower maintenance costs, and improve production efficiency. It can manage data for vibration and temperature measurements, as well as for on-site inspection points, all with this one device. By inputting equipment specifications, it can automatically analyze the causes of vibration abnormalities, allowing for maintenance actions to be determined on-site. 【Features】 - Display of diagnostic and inspection results color-coded for easy interpretation - Measurement can be conducted without concern in dusty factory environments or outdoor conditions during rain - Two-way communication for measurement instructions and data collection using mobile phones or PHS - Enables efficiency improvements in diagnostic service operations For more details, please contact us.

The G-MEN DR20 allows for switching between a maximum range of 20G and 10G for 3-axis static acceleration values, achieving a minimum sampling period of 1 msec. The device is also equipped with a temperature and humidity sensor, recording changes in 3-axis acceleration, temperature, and humidity over time. Additionally, the device features an LCD panel for checking recorded data and setting conditions. 【Features】 - The device is equipped with 3-axis (X, Y, Z) acceleration sensors, capable of recording at a minimum sampling rate of 1 msec. - The range of the acceleration sensors can be switched between a maximum of 20G and 10G. - The device also includes a temperature and humidity sensor, allowing for the recording of temperature and humidity. - The device can record for approximately 50 days (sampling at 10 msec) using two AA alkaline batteries. - Recorded data can be extracted via the built-in USB interface. For more details, please contact us or download the catalog.

The vibration display device VP230 continuously shows the vibration level, making it highly effective for public relations with local residents. The VP230 is a large digital display that shows instantaneous values once every second. It is compact and lightweight, making installation easy, and it is weatherproof for outdoor use. It uses a vibration level meter that has passed the certification of the Measurement Law. 【Features】 ○ Digital display & rotating light ○ The rotating light activates when exceeding the specified value (set value) ○ Ideal for vibration management at civil engineering and construction sites For more details, please contact us or download the catalog.

The NL-22 standard sound level meter (with card) features a linearity range of 100dB, a clear screen display, and the ability to perform continuous measurements. It is compatible with memory cards for saving measurement data. It comes with management software that includes a real sound monitoring function and the ability to play back recorded actual sounds. 【Features】 ○ By using the real sound monitor card NX-22J, you can add the real sound monitoring function to the main unit. ○ During noise measurement, events can be recorded directly to the memory card based on various settings such as event recording (set level) and interval recording (time interval settings). ○ Using the NL-22 management software, data processing can be performed while listening to the actual sound. For more details, please contact us or download the catalog.

A measuring device for evaluating the magnitude of vibrations using vibration quantity (vibration level) corrected for the human body's vibration sensation characteristics, or vibration acceleration level.

Vibration level meter conforming to the Measurement Law and JIS C 1510:1995.

By using a servo accelerometer, it is possible to measure ultra-low frequency vibrations above 0.1 Hz, which is difficult with piezoelectric accelerometer pickups, making it a versatile vibration meter.

Maintenance management and inspection of industrial machinery centered around rotating machines. A general-purpose vibration meter optimal for performance testing in various stages of machine development.

Integrating sphere scattering light turbidity meter

It is a compact 4-channel data recorder that can capture sound and vibration waveforms, as well as various electrical signals, on-site.

It is used to measure the floor impact sound insulation performance of buildings as specified in JIS A 1418-1.

This is a notice from Rex Co., Ltd. regarding the "Heavy Floor Impact Sound Generator Bang Machine FI-02."

This is a handheld integrative sound level meter that can simultaneously perform noise measurement and real-time frequency analysis in 1/3 or 1/1 octave bands.

This is a notice from Rex Co., Ltd. regarding the "Precision Sound Level Meter NA-28."

It is a handheld 2-channel FFT analyzer.

This is a noise generator that applies signal processing techniques using DSP to generate white noise/pink noise from M-sequence pseudo-random noise, and creates band noise using a 1/1 octave filter.

This is a vibration meter designed to use a piezoelectric accelerometer as a detector, capable of accommodating a wide range of vibration measurements.

This is a system that automatically measures noise and vibration at multiple locations and centrally manages the measurement results. The measured data is transmitted to a management location, allowing real-time management on a computer. Up to a maximum of 8 measuring instruments can be connected, including sound level meters and vibration meters. Additionally, if there are concerns about low-frequency noise, it is also possible to incorporate data from a low-frequency sound level meter (G characteristic). For example, it is possible to configure 8 sound level meters at different locations, or 4 sound level meters and 4 vibration meters. The data from the sound level meters and vibration meters is imported into a computer, where calculations for Leq, L5, L10, L50, L90, L95, LMax, and LMin are automatically performed, and the results are recorded (10-minute calculation values).

This is a system that automatically measures noise and vibration at multiple locations and centrally manages the measurement results. The measured data is transmitted to a management location, allowing real-time management via a computer. Up to eight measuring devices, including sound level meters and vibration meters, can be connected. Additionally, if there are concerns about low-frequency noise, it is also possible to incorporate data from a low-frequency noise level meter (G characteristic). The data from the sound level meters and vibration meters is imported into a computer, where calculations for Leq, L5, L10, L50, L90, L95, LMax, and LMin are performed automatically, and the results are recorded (10-minute calculation values). ***Features*** - Measurements can be taken for any specified duration using a timer setting. - If the noise or vibration exceeds pre-specified regulatory values, a warning light can be activated. This is ideal for alerting workers and for identifying abnormalities in the office. - Measurement data can be displayed at the installation site. - Alarm emails can be sent. - Wireless data transmission is possible. - A data display unit can be connected on-site. By displaying the current noise and vibration levels, it serves as a public relations tool for nearby residents.

***Features*** Noise has a nature that changes constantly, which leads to many evaluation methods. The NL-21, equipped with the latest DSP (Digital Signal Processor), simultaneously calculates almost all currently considered evaluation values. To support automatic measurement, auto storage, and data processing via computer, it uses a compact flash card. Large amounts of data can be easily stored in memory. Continuous measurement is assured with a wide dynamic range of 100dB. Simultaneous measurement of equivalent noise level Leq, time-weighted noise level LN, maximum values, and more. Long-term data recording is possible on a memory card (compact flash card). An integrated timer function enables long-term automatic measurement. It features a built-in dual measurement function for LAeq and LCpeak. The LCD with backlight provides a clear screen display. The comparator output function allows for setting level determination. Functionality can be expanded with program cards for various filter settings and more.

This device is installed at construction sites and displays two types of levels simultaneously: noise level and vibration level, and it activates an alarm when the set values are exceeded. Noise and vibration meters can be connected according to the application. Additionally, by connecting to our "Noise and Vibration Measurement System," a wide range of options for noise and vibration measurement systems can be utilized.

The NL-42 sound level meter is designed with ease of use in mind, eliminating the hassle of checking the manual during measurements. The screen is a large, easy-to-read 3-inch color LCD. It also features waterproof performance that can withstand sudden rain.

The NL-52 sound level meter is designed with ease of use in mind, eliminating the hassle of checking the manual during measurements. The screen features a large and easy-to-read 3-inch color LCD. It also includes waterproof performance to withstand sudden rain.

This is a low-frequency sound level meter that enables real-time analysis of 1/3 octave bands while measuring G-weighted sound pressure levels. The G-weighted frequency response characteristics and the 1/3 octave band filters comply with both domestic and international standards. The main unit is calibrated with a preamplifier-integrated 1-inch ceramic microphone UC-24. It is equipped with an LCD display, operation key switches, AC output terminals, serial communication terminals, and an infrared communication window.

It is a vibration level meter that conforms to the Measurement Law and JIS C 1510:1995, capable of measuring ground vibrations related to vibration pollution as a vibration level corrected by the human body's vibration sensation characteristics. It consists of the main unit and the PV-83C (three-direction vibration pickup). In addition to vibration level measurement, it is a versatile vibration level meter with features such as bar graph display, data processing capabilities, and memory card recording. With the optional program card, frequency analysis is also possible.

The whole-body vibration measurement device consists of a seat pickup PV-62, a 3-axis accelerometer VM-54, and a whole-body vibration measurement card, enabling measurements and evaluations as specified by the standards. Its application involves placing an acceleration pickup on a vehicle seat and sitting on it to measure the vibrations that the vehicle imparts to the body.

Equipped with FFT analysis functionality, real-time analysis frequency of 20 kHz, a maximum dynamic range of 110 dB achieved through 24-bit A/D conversion, and featuring a TFT color LCD with excellent visibility in any environment.