新東科学 List of Products and Services

The "3D MUSE TYPE: 37i" is a portable measuring device that can measure the slipperiness of various object surfaces. The method for measuring static friction has evolved from using inclined methods and strain gauges to the "MUSE TYPE: 94i-II," which can measure simply by placing it on the flat surface of the object. This product can measure not only horizontal surfaces but also inclined surfaces, walls, ceilings, and various other surfaces, featuring easy operation that does not require experience, as well as improved stability and weight balance during multi-angle measurements. 【Specifications (excerpt)】 ■ Measurement range: Static friction coefficient 0.000 to 1.300 ■ Display: LCD Resolution: 0.001 ■ Slider: Aluminum (hard chrome treatment) φ26mm ■ Load method: Self-weight + coil spring method ■ Power supply: Alkaline batteries (AA × 4) or AC adapter (optional) *For more details, please download the PDF or feel free to contact us.

• Other measurement, recording and measuring instruments

We would like to introduce our circulating stirrer, the 'Stirrer 100'. It is a very robust circulating stirrer that can be safely used for long hours in a constant temperature water bath, ensuring uniform temperature distribution. The output is 3W, the current is 0.2A, and the stirring capacity is approximately 100 liters (50×50×water depth 40cm). Please feel free to contact us if you have any requests. 【Specifications】 ■Motor - Output/Current: 3W/0.2A - Rated Torque: 3W/50Hz: 0.025N·m, 60Hz: 0.021N·m - Rated Speed: 50Hz: 1200rpm, 60Hz: 1450rpm ■Stirring Capacity: Approximately 100 liters (50×50×water depth 40cm) ■Power Supply: Single-phase 100V±10% 50/60Hz *For more details, please download the PDF or feel free to contact us.

• Mixer/agitator

We would like to introduce our magnet vacuum stirring seal, "Mighty Mag Seal." This stirring seal utilizes magnetic coupling to provide sealing and drive transmission functions within a flask. By simply attaching it to a three-one motor, high vacuum stirring can be achieved. Please feel free to contact us if you have any inquiries. 【Lineup】 ■MG-6-01R-1 ■MG-6-02R-1 *For more details, please download the PDF or feel free to contact us.

• Mixer/agitator

We would like to introduce our mechanical torque meter unit 'YT'. It can be easily attached to the chuck of your three-one motor, allowing you to conveniently read viscosity changes as rotational torque. This is a very robust and reproducible rotational torque meter that utilizes the twisting of a spring. There are five types in the lineup, so please specify your choice when placing an order according to your purpose. 【Lineup】 ■(BL3000): 5N·cm (0.05N·m), 10N·cm (0.1N·m) ■(BL1200): 20N·cm (0.2N·m) ■(BL600): 50N·cm (0.5N·m) ■(BL300): 100N·cm (1.0N·m) *For more details, please download the PDF or feel free to contact us.

• Torque wrench

We would like to introduce our up-and-down rotating mixer, the 'Z+'. The mixing blades rotate while repeating an up-and-down reciprocating motion. This prevents the decrease in mixing efficiency caused by the circumferential flow that tends to occur with rotational mixing, making it easier to create axial flow and achieving uniform mixing in the tank in a short time. Please feel free to contact us if you have any inquiries. 【Features】 ■ Repeats up-and-down reciprocating motion in conjunction with the rotation of the mixing blades. *For more details, please download the PDF or feel free to contact us.

• Mixer/agitator

We would like to introduce our tank-mounted agitator, the 'MSM Series'. This series allows for easy and secure installation of a three-in-one motor on mixing tanks, and it is available in five models according to the mixing capacity. It can be installed on both open and closed tanks, and it features a Heller (2s) type that does not limit the choice of tanks. 【Product Lineup】 ■MSM-BL: Small capacity ■MSM-BLh: Medium capacity ■MSM-BLW: Large capacity ■MSM-Ex: Explosion-proof ■MSM-EP: Air agitator *For more details, please download the PDF or feel free to contact us.

• Mixer/agitator

We would like to introduce our mini plant class air motor explosion-proof mixer, the 'EPW Series.' Equipped with a large gearbox proven in the BLW series and a drill chuck compatible with Φ13, it supports high-torque mixing. The arm rod adopts a large type without movable parts, ensuring safety even during high-capacity mixing. An optional large safety cover is also available. 【Features】 ■ Can operate without oil ■ Equipped with a drill chuck compatible with 12 shafts *For more details, please download the PDF or feel free to contact us.

• Mixer/agitator

We would like to introduce our air motor explosion-proof stirrer, the 'EP Series'. By adjusting the air pressure with the needle valve attached to the air motor, you can control the rotation speed and torque, allowing for safe use in laboratories where open flames are strictly prohibited. We have standardized components with the BL series, which is known for its ease of use, to provide the same ease of use in the air motor stirrer. Of course, it is MADE IN JAPAN. 【Features】 ■ Operation without oil is also possible ■ Stainless steel drill chuck resistant to organic solvents and more *For more details, please download the PDF or feel free to contact us.

• Mixer/agitator

We would like to introduce our external output stirrer, the 'Ft Series'. The output connector provides analog voltage output for rotational speed and equivalent torque, allowing for the measurement of viscosity changes during stirring with a recording device. Additionally, even if viscosity changes occur during the stirring process, the set rotational speed is maintained. Please feel free to contact us if you have any inquiries. 【Features】 ■ Rotational speed and equivalent torque values are output as analog voltage, enabling the monitoring of viscosity changes. ■ The set rotational speed is maintained even if viscosity changes occur during the stirring process. *For more details, please download the PDF or feel free to contact us.

• Mixer/agitator

The "R Series" is a remote-controlled stirrer with external input and output, convenient for use in draft chambers. With external output for rotation speed and equivalent torque, you can monitor the stirring conditions, and based on those conditions, you can control the rotation speed and switch the rotation direction through external input operations, making it usable as part of a stirring system. If you want to use it in a draft chamber or control it from your location, please choose this series. 【Features】 ■ Easily capture stirring rotation and load current values to a PC via USB connection ■ Set rotation speed and switch direction through external input operations (analog input) ■ Rotation speed and equivalent torque values are output as analog voltage, allowing you to monitor viscosity changes ■ Separate controller and motor body *For more details, please download the PDF or feel free to contact us.

• Mixer/agitator

The "TE Series" is a stirring machine equipped with a torque converter that incorporates a strain gauge type torque meter into a three-one motor. It enables the measurement of low fluctuation torque, which is difficult with the R Series and Ft Series. It uses a specially designed through-type torque meter, ensuring ease of use based on the three-one motor standards. Please feel free to contact us if you have any inquiries. 【Features】 ■ Accurate torque measurement with the built-in torque meter ■ RPM output available with the Ft option ■ Digital display of torque values * For more details, please download the PDF or feel free to contact us.

• Mixer/agitator

"TriboSoft" is a general-purpose friction and wear analysis software that allows you to measure and analyze tribological data using mouse operations. In addition to automatic calculations of the friction coefficient and friction resistance, it is possible to graphically compare characteristics through overlaying graphs. It also supports friction tests using reciprocating motion and allows you to extract data in real-time for each reciprocation during measurement. 【Product Overview】 ■ Set Contents: Data analysis software, A/D converter (built into the main unit), USB cable ■ Operating Environment OS: Windows 10, Windows 8, Windows 7 ■ Communication Port: USB port *For more details, please download the PDF or feel free to contact us.

• Software (middle, driver, security, etc.)

The "TYPE: 35" is a wear testing machine that achieves a wide load range from 20g to a maximum of 100kg. With this single unit, a wide range of wear experiments can be conducted. The adoption of a rotary turntable allows for wear testing at both low and high speeds. Additionally, we have prepared a CCD camera tribo system that enables observation of wear phenomena, allowing for safe and accurate understanding of wear processes. 【Main Specifications (Partial)】 ■ Table Size: φ60mm ■ Rotational Speed: 30–3000rpm ■ Rotation Counter: Can accumulate up to MAX 999,999 counts ■ Automatic Stop Function: Can automatically stop at a specified count from 1 to 999,999 ■ Load Method ・20g–10kg: Balance arm method + weights ・10kg–100kg: Lifting weight mechanism + weights *For more details, please download the PDF or feel free to contact us.

• Testing Equipment and Devices

The "TYPE: 20" is a torque-type friction resistance measuring device with a torque converter directly connected to a turntable capable of carrying test specimens. On the load side, a disk with surface contact and a ball indenter with point contact can be selected. Both the disk and the ball indenter can balance their own weight, allowing for accurate friction and wear tests from low loads. Additionally, a safety interlocked opening and closing cover is standard, further enhancing safety during measurements. 【Main Specifications (Partial)】 ■ Rotational Speed: 30–3000 rpm (with rotational speed display and total rotation count display) ■ Automatic Stop Function ・ Stop after specified rotation count (up to 99,999,999 rotations) ・ Stop after specified time (up to 65,535 seconds) ■ Measurement Range: 0–4000 g·cm ■ Turntable: φ5 inch *For more details, please download the PDF or feel free to contact us.

• Other measurement, recording and measuring instruments

The "TYPE: 10" is a static friction coefficient measuring device equipped with a sensor that monitors the movement of a flat pressure pad on an inclined plate. The inclined plate is in a horizontal position, and as soon as the measurement begins, it starts to tilt. The sensor captures the movement when the flat pressure pad begins to slide and instantly stops the inclined plate. At this moment, the angle and tanθ are read. 【Main Specifications (Excerpt)】 ■ Rising Speed: Average 10°/6sec (Return 10°/3sec) ■ Drive Motor: Reversible Motor ■ Measurement Range - Static Friction Coefficient 0 to 1.5 (Minimum Scale 0.005) - Sliding Angle 0 to 56° (Minimum Scale 0.5°) ■ Flat Pressure Pad: Weight 150g or 200g (by changing weights) *For more details, please download the PDF or feel free to contact us.

• Other measurement, recording and measuring instruments

The "TYPE: TriboVac2000" is a vacuum friction and wear testing machine that allows for easy evaluation of products in a vacuum, which has been difficult to measure until now. It is widely applicable for research and development purposes in industries such as aerospace and new materials and technologies. The loading method employs the well-established HEIDON balance system, allowing for precise loading from low weights. High-speed wear experiments using a rotating table are also available as an option. It can accommodate specifications for micro-weight applications as well. 【Main Specifications (Partial)】 ■ Vertical Load: 10–1000g ■ Loading Method: Weight replacement method ■ Fixing Method ・Upper side sample: Dedicated holder ・Lower table side sample: Bolt fixation ■ Load Cell: Capacity 9.8N, Accuracy ±0.098N *For more details, please download the PDF or feel free to contact us.

• Testing Equipment and Devices

The "TYPE: 18・18L" is a continuous weight-type scratch strength testing machine that uses a conical shape with an R processing at the tip of the scratching needle. The travel distance is 100mm, and weights of 0–50g, 0–100g, and 0–200g can be selected by changing the continuous weight weights. Reproducible tests can be conducted at any time. Additionally, by using only a constant load weight without the continuous weight weights, scratch hardness can also be obtained. 【Main Specifications (Partial)】 ■ Travel Speed: 600mm/min (Return: 1200mm/min) ■ Drive Motor: Reversible Motor ■ Drive Method: Rack & Pinion ■ Travel Distance: 100mm ■ Table Dimensions: 200mm × 120mm *For more details, please download the PDF or feel free to contact us.

• Testing Equipment and Devices

The "TYPE: 14FW" is a friction and wear testing machine that accommodates a wide range of tests. You can set the table speed, travel distance, and number of reciprocations, allowing tests to be conducted under various conditions. Additionally, all of these settings can be operated via a touch panel, so there is no need to learn complex operating methods. [Features] ■ Complies with various JIS standards ■ Real-time measurement of changes in friction resistance due to wear ■ Measurement of surface scratch hardness ■ Measurement of surface stickiness ■ Measurement of peel resistance *For more details, please download the PDF or feel free to contact us.

• Other measurement, recording and measuring instruments

The "TYPE: HHS2000S/HHS3000S" is a load-variable friction and wear testing system that can create a three-dimensional wear pattern graph showing the relationship between wear cycles, vertical load, friction force, and wear volume with a single measurement from one test specimen. It can also determine the critical load corresponding to the transition of wear. As a result, it not only eliminates the need for multiple test specimens but also significantly shortens testing time, simplifies complex data analysis, and provides excellent data. Additionally, by using the optional CCD camera "Tribosystem," more advanced testing can be conducted. 【Features】 ■ Newly adopted perpendicular balance arm method ■ Added STEP operation mode *For more details, please download the PDF or feel free to contact us.

• Testing Equipment and Devices

The "TYPE: 30S" is a testing machine focused on wear test evaluation through visual inspection. It comes standard with a stepless speed adjustment function and an automatic stop function after a specified number of cycles. By displaying the number of strokes per minute, speed adjustment becomes easier. Additionally, specifications for 2 to 4 units that can conduct multiple tests under the same conditions are also available. 【Main Specifications (Partial)】 ■ Moving Speed: 300–3000 mm/min (at 10 mm) 1500–15000 mm/min (at 50 mm) ■ Drive Method: Eccentric cam type AC induction motor ■ Speed Adjustment: Variable type (motor rotation variable with stroke count display) ■ Moving Distance: 10, 20, 30, 40, 50 mm (5-step switching) ■ Number of Movements: Up to 999,999 times with automatic stop function after a specified number of cycles *For more details, please download the PDF or feel free to contact us.

• Testing Equipment and Devices

The "TYPE: 38" is a friction and wear testing machine that has reduced costs as much as possible while maintaining the measurement performance of the tribo gear. It features basic performance that rivals higher-end models, with touch panel operation and a wide range of measurement capabilities. It adopts an integrated load transducer with the measurement holder, making operation even easier. With TriboSoft (optional), you can easily measure, analyze, and manage from static friction coefficient measurements to reciprocating friction measurements. 【Main Specifications (Partial)】 ■ Moving Speed: 5mm to 6000mm/min ■ Drive Motor: AC servo motor ■ Drive Method: Rack and pinion ■ Moving Distance: 1 to 100mm ■ Moving Mode: Single mode with automatic stop after moving the set distance, Repeat mode with reciprocating motion over the set distance (up to 99,999,999 times) *For more details, please download the PDF or feel free to contact us.

• Testing Equipment and Devices

The "TYPE: 33" is a tactile measurement device that can quantify the texture, feel, and familiarity of surfaces, which have been difficult to measure quantitatively until now. It detects resistance in the X, Y, and Z directions using three strain gauges. The operation is simple: just place a sample on the sample table and trace it with your fingers. Measurement can be easily performed. Additionally, by using a handy rope, it is possible to measure samples that cannot be placed on the sample table. 【Main Specifications (Partial)】 ■ Sample table dimensions: 100mm × 100mm ■ Measurement range: 0–20N (in each axis direction) X, Y, Z directions ■ Operating environment: 0–50℃, within 85% RH, but no condensation ■ Power supply: AC100V 50/60Hz ■ Main unit dimensions ・Measurement part: W102mm × D150mm × H110mm (excluding fixed plate) ・Amplifier part: W160mm × D250mm × H327mm (excluding protrusions) *For more details, please download the PDF or feel free to contact us.

• Other measurement, recording and measuring instruments

The "94i-II" is a portable measuring device that allows anyone to easily measure the static friction coefficient. Traditionally, measuring static friction was done using methods like the incline method or strain gauges, but these had difficulties in terms of usability on-site. This product was developed as a portable friction meter to solve these issues. 【Main Specifications (Partial)】 ■ Measurement Range: Static Friction Coefficient 0.000 to 1.600 ■ Display Resolution: 0.001 ■ Detector: VCM Photo Sensor ■ Display: 7-Segment LED (Red) 4 Digits ■ Slider: Brass (Hard Chrome Plated) 40g *For more details, please download the PDF or feel free to contact us.

• Other measurement, recording and measuring instruments

The "TYPE: 40" is a friction and wear testing machine that determines the number of reciprocating cycles at which changes in surface condition and film detachment occur by measuring the increase or decrease in friction resistance due to repeated friction in a reciprocating motion. It comes standard with a large lift-up acrylic cover that can be used during testing. An optional feature allows for simple sealing of the cover. Additionally, it has a stroke of 13mm in the Y direction, which reduces the effort required for testing. 【Features】 ■ Real-time measurement of changes in friction resistance due to wear ■ Large lift-up acrylic cover / simple sealing function ■ Standard equipped with a Y-direction stage ■ Various measurement jigs *For more details, please download the PDF or feel free to contact us.

• Testing Equipment and Devices

The "Three One Motor BLh-Saf" is a high-power safety stirrer that features a large acrylic cover. The 80W "BLh-Saf" maintains its compact design while enhancing power and achieving low heat generation. With an improved heat dissipation design, it eliminates heat fins that can be an obstacle during cleaning. The flat casing allows for easy wiping of dirt. 【Features】 ■ Flat design with no protruding upper drive shaft ■ Stirring rod can be raised and lowered when the cover is opened ■ Acrylic case makes it easy to see the rotation status *For more details, please download the PDF or feel free to contact us.

• Mixer/agitator

The "Three One Motor BLW-Saf" is a mini-plant class stirrer equipped with a large safety cover that completely covers the rotating parts. The acrylic cover, which allows visibility of the operation, has a handle for easy opening and closing, making it a user-friendly safety cover that is easy to understand. It also features an interlock function that stops the motor rotation when the safety cover is opened. 【Features】 ■ Three models available to accommodate a wide range of stirring needs ■ Stainless steel drill chuck resistant to organic solvents and more ■ Drill chuck compatible with a maximum φ13 shaft for high torque ■ Large aluminum housing with excellent heat resistance and heat dissipation ■ Equipped with a feedback function to maintain the set rotation speed *For more details, please download the PDF or feel free to contact us.

• Mixer/agitator

The "Three One Motor BL-Saf" is a safety general-purpose stirrer that features a large acrylic cover. The 40W "BL-Saf" achieves low heat generation with its compact housing. The design improves heat dissipation by eliminating heat fins that can be an obstacle during cleaning. The flat housing allows for easy wiping of dirt. 【Features】 ■ Flat design with no protruding upper drive shaft ■ Stirring rod can be raised and lowered when the cover is opened ■ Acrylic case makes it easy to see the rotation status *For more details, please download the PDF or feel free to contact us.

• Mixer/agitator

The "Three One Motor Ex" is a pressure-resistant explosion-proof stirrer driven by a motor. It embodies the ease of use and compact design cultivated over many years, while achieving pressure resistance and explosion-proof capabilities as much as possible, resulting in a stirrer that can be used directly in laboratories. It can be used for stirring in hazardous locations of Zone 1 and Zone 2. Additionally, to ensure your peace of mind, it comes with a 5-year free long-term warranty. 【Features】 ■ Compact design suitable for laboratory use ■ Achieves the same functionality and usability as the Three One Motor BL series ■ Offers five models that can accommodate a wide range of stirring needs *For more details, please download the PDF or feel free to contact us.

• Mixer/agitator