サンコー List of Products and Services

The "SEPA CF II" is a cross-flow flat membrane testing device that can conduct tests with a small amount of sample liquid. It comes with a variety of flat membranes and spacers, allowing for the testing of RO membranes, NF membranes, UF membranes, and MF membranes under various operating conditions from low to high pressure. With simple operation, it can obtain data useful for scale-up. It is available as a unit and can accommodate specification changes such as piping materials. 【Features】 ■ Contributes to simplifying work and reducing costs ■ Suitable for small starts due to lower initial costs ■ Immediate evaluation and experimentation possible with unit provision ■ Usable with flat membranes of 19cm x 14cm (effective membrane area of 140cm²) ■ Active in research and development departments for chemicals, food, pharmaceuticals, etc. *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Coating thickness gauge

The HydraCell pump, with over 40 years of proven performance in the water treatment industry, is widely adopted by major domestic water treatment manufacturers for RO and UF systems. In the United States, where the manufacturer is located, it is also used in RO systems for submarine life support, achieving one of the greatest successes in this application. Thanks to its seal-less design, it can continuously and stably pump various liquids, including seawater, industrial wastewater, organic solvents, and chemicals, at high pressure without issues. The low pulsation achieved through three or five-piston configurations also helps reduce the burden on membranes. We are currently offering a free booklet that explains the benefits of using the HydraCell pump! **Benefits of the HydraCell Pump:** 1. A wide range of lineup options, accommodating everything from small flat membrane RO test units to 8-inch systems! 2. Choice of wetted materials including SUS316L, duplex stainless steel, Hastelloy C, and ceramic! 3. Accurate flow control while maintaining constant pressure! 4. The seal-less design eliminates concerns about liquid leakage due to corrosion of mechanical seals, allowing for 100% containment of liquids! 5. Capable of dry running! *For more information, please check our catalog and videos. Feel free to contact us with any inquiries.*

• Positive Displacement Pump
• Special Pump
• Water treatment equipment

The HydraCell pump, with over 40 years of proven performance in various industries worldwide, is a high-pressure pump that features a seal-less structure, a strength of diaphragm pumps, allowing for safe use even in applications that are difficult for conventional pumps. We offer a rich variety of models tailored to specific applications, such as the P series for metering and chemical dosing in neutralizing acidic waste generated during the etching process, and the G series for coolant delivery and pure water rinsing during sapphire processing. Thanks to its seal-less design, it can deliver coolant fluids containing pure water and fine chips of ultra-hard materials at high pressure without any issues. It is also compatible with a wide range of solvents and chemicals. **Benefits of the HydraCell Pump:** 1. It can be used even if ultra-hard chips that cannot be filtered out during sapphire processing are present in the coolant! 2. No need for precise filtration to protect the pump! Since it has no sealing parts, maintenance costs and frequent filter cleaning can be reduced! 3. Due to its seal-less design, there is less contamination during high-pressure delivery of pure water in the cleaning process! 4. It allows for accurate flow control while maintaining a constant pressure! *For more information, please refer to the catalog and videos. Feel free to contact us with any inquiries.*

• Positive Displacement Pump
• Special Pump
• High pressure cleaner

The HydraCell pump, with over 40 years of proven performance in the high-pressure cleaning industry, has been adopted as a standard high-pressure cleaning option by major domestic cleaning machine manufacturers, achieving one of the greatest successes in this application. Its seal-less design allows for the trouble-free delivery of cleaning fluids containing chips at high pressure. It also accommodates a wide range of cleaning fluids, including solvents and chemicals. We are currently offering a free booklet that explains the benefits of using the HydraCell pump! **Benefits of the HydraCell Pump** 1. Capable of delivering liquids containing foreign substances, thus solving the problem of early pump failure that occurs during initial cleaning after processing. 2. No need for precise filtration to protect the pump! Since it has no sealing parts, it reduces maintenance costs and the frequency of filter cleaning! 3. Capable of delivering any type of cleaning fluid, including hot water, pure water, alkaline solutions, and solvents! 4. Allows for accurate flow control while maintaining a constant pressure! *For more information, please check our catalog and videos. Feel free to contact us with any inquiries.*

• Positive Displacement Pump
• Special Pump
• High pressure cleaner

We would like to introduce the water treatment-related products handled by Sanko Co., Ltd. Since importing functional membranes from the United States in 1969, we have imported and sold numerous types of membranes from various manufacturers over many years. Based on this experience, we now provide products and services to a wide range of industries, including medical, pharmaceuticals, food, beverages, chemicals, and industrial wastewater. 【Product Lineup】 ■ Functional Membranes ■ Vessels ■ Testing Equipment ■ E-Cell * For more details, please refer to the PDF materials or feel free to contact us. * We are also offering a "Functional Membrane Selection Guide"!

• Other water treatment equipment

This is an introduction to the products we handle for "pharmaceuticals, cosmetics, and detergent development." 【Product Lineup】 ◎ Heat-resistant membrane "Duratherm HWS・EXL Series (SUEZ)" HWS allows for cleaning through hot water sterilization. EXL supports continuous operation at 80°C. RO membranes, NF membranes, and UF membranes are available, with sizes ranging from 2.5 to 8 inches. ◎ Heat-resistant membrane "HSRO・XUS Series (DuPont)" The HSRO series can accommodate hot water sterilization and minimizes water retention in pressure vessels. The XUS series can operate at high temperatures of 70°C. ◎ Stainless steel pressure vessels (SUEZ) Surface finishes can be selected from buff polishing, resin coating, and electropolishing. They are available in heat-resistant and sanitary specifications. ◎ Couplings (PASS) Materials range from SUS304 to super duplex stainless steel equivalents. They offer comparable performance to domestic products at a lower cost, providing excellent cost performance. In addition to the above, we offer a variety of other products. For more details, please refer to the PDF materials. Feel free to contact us with any inquiries.

• others
• Other metal materials

The HydraCell pump, with over 40 years of proven performance in the machine tool industry, has been adopted as the standard high-pressure coolant option by major domestic machine tool manufacturers, achieving one of the greatest successes in this application. Its seal-less design allows for the trouble-free delivery of coolant containing chips at high pressure. We are currently offering a free booklet that explains the benefits of using the HydraCell pump! **Benefits of the HydraCell Pump** 1. Since it can deliver liquids containing foreign substances, there is no need for filtration costs to protect the pump! This enables a reduction in maintenance costs! 2. It can efficiently deliver coolant liquids of any type! 3. It allows for precise flow control while maintaining a constant pressure! *For more details, please refer to our catalog and videos. Feel free to contact us with any inquiries.* *Please turn on subtitles (C) when watching the video.*

• Positive Displacement Pump
• Special Pump
• Milling machine

We would like to introduce our company, which has a wealth of experience in the import and sales of "functional membranes," and our products for the food industry. 【Product Lineup】 <Food Membranes: Spiral Membranes> 　■ Effective for applications with relatively low suspended solids 　■ Large membrane area allows for fewer units, reducing installation space and costs 　■ Products from manufacturers such as DuPont, SUEZ, Alfa Laval, Synder, and KOCH are available <Heat-Resistant Membranes: SUEZ Duratherm Series> 　■ "HWS" suitable for cleaning with hot water sterilization at 90°C and 　　"EXL" capable of continuous operation at 80°C, suitable for beverages, food, and dairy industries 　■ Supports a wide range of membrane types and sizes, including RO, NF, and UF membranes from 2.5 to 8 inches <Sanitary Pressure Vessels: Stainless Steel from Alfa Laval> 　■ Capable of operating at high temperatures up to 80°C 　■ All components comply with FDA regulations, making them suitable for pharmaceuticals and food industries 　■ Designed for full-fit membranes, reducing retention inside and ensuring hygiene *We are also providing materials that include other product lineups. For more details, please check the download button. Feel free to contact us with any inquiries.

• Beverage Production Equipment
• Other water treatment equipment
• Filtration Equipment

The "HydraCell P100" is a low-pulse, linear flow single diaphragm metering pump that can handle a wide range of liquids, from clean water to high-concentration slurries. With inverter control, it enables high-precision and highly reliable liquid delivery. Its robust design is compact and space-saving! 【Features】 ■ Capable of handling a wide range of liquids from clean water to high-concentration slurries. ■ High precision and reliable liquid delivery enabled by inverter control. ■ Compact design allows for space-saving. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Other pumps
• Positive Displacement Pump
• Special Pump

The "FRP Pressure Vessel for RO Membranes" is a pressure vessel widely used in industrial settings for RO membranes. It is more affordable and lighter compared to stainless steel (SUS), making it easier to handle. Additionally, it comes in a wide range of sizes from 2.5 inches to 16.0 inches, accommodating various pressure requirements. It can be used for a variety of applications. 【Features】 ■ Widely used in industrial settings ■ More affordable and lighter than stainless steel, making it easy to handle ■ A wide range of sizes available from 2.5 inches to 16.0 inches ■ Capable of handling a wide range of pressures ■ Usable for various applications *For more details, please refer to the PDF document or feel free to contact us.

• Plastic utensils and containers
• Other laboratory equipment and containers

The compact seal-less diaphragm pump "HydraCell Pump" has been proven in the industry for over 40 years to efficiently transfer a wide range of fluids, including corrosive liquids, reclaimed water, and slurries containing sludge and powders. To accommodate various applications, it offers a wide range of flow rates and pressures with multiple lineups. We are currently providing materials that highlight the advantages compared to conventional pumps. 【Features of HydraCell】 ■ Reduces initial costs and lowers running costs ■ Capable of transferring fluids from slurries and low-viscosity liquids to high-viscosity liquids ■ Precise supply and metered injection of process liquids through pulse-free, continuous metering ■ Highly versatile pump design with minimal maintenance *For more details, please contact us or download the PDF to view.

• Positive Displacement Pump
• Special Pump
• Other pumps

The HydraCell "T100 Series (Low)" is a three-diaphragm pump designed for high flow and high pressure. It can operate with the suction piping closed or clogged, allowing for continuous dry running without damage, thereby reducing downtime and maintenance costs. Thanks to its special diaphragm shape, it can handle abrasive liquids that cannot be managed by gear, screw, or plunger pumps. 【Features】 ■ Maximum flow rate: 366.1 l/min ■ Maximum pressure: 14.5 MPa ■ Reduces maintenance costs such as seal and packing replacements ■ Supports operation under low NPSH conditions and negative pressure in the suction (no feed pressure required) ■ Capable of handling abrasive liquids ■ Achieves energy savings with higher pump efficiency compared to centrifugal pumps *For more details, please refer to the PDF document or feel free to contact us.

• Positive Displacement Pump
• Special Pump
• Other pumps

The "HydraCell MT8 Series" is a precision metering pump that delivers pulse-free, linear flow and exceeds the steady-state accuracy, linearity, and reproducibility of the API675 standard, thanks to its three-diaphragm design. With a hydraulically balanced diaphragm design, it demonstrates excellent performance across the entire pressure range. The inverter control allows for high-precision and reliable fluid delivery, and its seal-less design, featuring a versatile PTFE diaphragm, enables the handling of various process fluids. 【Features】 ■ High precision and reliable fluid delivery enabled by inverter-controlled rotational speed ■ Metering accuracy exceeding API675 standards ■ Capable of dry running ■ Space-saving design ■ Versatile applications such as high-pressure injection, mixing, precise supply, and metering injection *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps
• Other physicochemical equipment
• Other laboratory equipment and containers

The cross-flow flat membrane testing device "SEPA CFII" is primarily used in the research and development departments of chemical manufacturers and water treatment equipment manufacturers. It supports the detachment of a single flat membrane and small liquid volumes, contributing to the simplification of work and cost reduction. 【Features】 ◆ Obtains useful data for scale-up with a cross-flow method ◆ Immediate evaluation and experimentation possible with unit provision ◆ Can test RO membranes, NF membranes, UF membranes, and MF membranes *For more details, please contact us or download the PDF for more information.

• Testing Equipment and Devices
• Other inspection equipment and devices
• Analytical Equipment and Devices

The HydraCell pump is a three-piston (some models are single-piston) diaphragm-type high-pressure pump. Due to its simple structure without mechanical seals, it is widely used by customers for pumping corrosive and highly abrasive liquids that cannot be handled by conventional pumps. Currently, we are offering the following case studies as a gift! - Replacement of competitor products in the high-pressure cleaning industry using HydraCell G-25 - Cleaning of construction machinery using HydraCell 【Features】 - Wide flow range (0.4 to 127 liters/min) and maximum pressure of 17.2 MPa - Seal-less design allows for use even with abrasives and sludge (no damage to the plunger) - Three-piston and five-piston diaphragm results in pulsation values within 5% - Self-priming capability up to 3 meters. No priming water required. - Energy-efficient design reduces power consumption due to an 85% pump efficiency motor capacity difference. *For more details, please download the PDF. Feel free to contact us with any inquiries. *Please download the PDF of the case study collection from the link below.

• Other pumps
• Positive Displacement Pump
• lathe

Our company, which sells functional membranes used in water treatment and processing facilities, is currently offering a free booklet titled "Functional Membrane Selection Guide," which condenses explanations and knowledge! From the basic knowledge of "What is a functional membrane?" to the characteristics of four types of functional membranes (RO membranes, NF membranes, UF membranes, MF membranes), this guide covers it all. You will gain knowledge about the key points for membrane selection that you might hesitate to ask others about! This is essential reading for both beginners and veterans! 【Contents】 ■ What is a functional membrane? ■ Key points for membrane selection ■ About flat membrane testing devices *You can view it immediately by downloading the PDF from the link below. *Feel free to contact us with any inquiries.

• Water treatment equipment
• Wastewater/wastewater treatment equipment

The cross-flow flat membrane testing device "SEPA CFII" is a membrane testing apparatus primarily used in the research and development departments of chemical manufacturers and water treatment equipment manufacturers. It operates in a cross-flow manner, allowing for the acquisition of useful data for scale-up. Additionally, it is provided as a unit, enabling immediate evaluation and experimentation simply by preparing the supply liquid and flat membrane. It can test various manufacturers' RO membranes, NF membranes, UF membranes, and MF membranes. It supports the detachment of a single flat membrane and small liquid volumes, contributing to simplified operations and cost reduction. 【Features】 ■ Cross-flow method ■ Compact ■ Easy operation ■ Economical ■ Maximum operating pressure 6.9 MPa *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices
• Other inspection equipment and devices
• Analytical Equipment and Devices

The "Flat Membrane Testing Device M20" is a flat membrane testing device for LAB using a cross-flow method. It enables separation using functional membranes in a cross-flow manner, allowing for the evaluation of multiple types of membranes at once, making the selection of membrane types easier. Additionally, the effective membrane area can be adjusted within the range of 0.036 to 0.72 m², making it suitable for small-scale production. 【Features】 ■ Allows evaluation of multiple types of membranes at once ■ Individual permeate from each membrane can be collected separately ■ Capable of high-pressure testing up to 69 bar and high-temperature testing at a maximum temperature of 90°C ■ The flat membrane area can be easily adjusted within the range of 0.036 to 0.72 m² ■ Many achievements in university laboratories and food/manufacturing research institutes ■ Compatible with RO membranes, NF membranes, UF membranes, and MF membranes from various manufacturers for testing *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

The "HydraCell T100 Series (High)" is a diaphragm pump designed with a seal-less design to prevent issues such as external leaks and reduce maintenance costs associated with seal and packing replacements. It can operate even during dry running or when the suction piping is closed, thereby reducing downtime and maintenance costs caused by pump troubles. 【Features】 ■ Compatible with low NPSH conditions ■ Can operate under negative pressure during suction (no feed pressure required) ■ High-pressure operation without stress due to a hydraulically balanced diaphragm design ■ Achieves energy savings through high pump efficiency ■ Robust design allows for low maintenance costs over a long period *For more details, please refer to the PDF document or feel free to contact us.

• Positive Displacement Pump
• Special Pump
• Other pumps

We would like to introduce a case study of seawater desalination by a major R/O equipment manufacturer. A major R/O equipment manufacturer previously used multi-stage centrifugal pumps, but confirmed that switching to the "G35 pump" and "G10 pump" resulted in a 75% reduction in repair costs. 【Number of units supplied (at the time of publication)】 ■ G35 pump: over 50 units ■ G10 pump: over 30 units *Example of regular replacement after 3 years of operation *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps
• Positive Displacement Pump
• Special Pump

We would like to introduce a case study from a leading manufacturer of degreasing, cleaning, and wet/dry blasting equipment. The company has adopted the "HydraCell Pump" for its spray-type cleaning machines, highlighting the product's excellent durability and high-pressure performance. Additionally, the "G35 model" has been selected for equipment designed for engine cleaning and degreasing of civil engineering machinery during renovations, using the pump to deliver chemical solutions and high-temperature recycled water to the cleaning nozzles at high pressure. [Reasons for Choosing HydraCell] - The use of high-pressure pumps results in water-saving effects. - The ability to utilize recycled water leads to significant cost reductions. *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps
• Positive Displacement Pump
• Special Pump

We would like to introduce a case study from a chemical product manufacturer that produces a wide range of products, from liquid soap to insecticides. Initially, a centrifugal pump was used as a high-pressure pump for cleaning, but it was found to have low durability and high maintenance costs after use. The "HydraCell G25 model" was adopted instead of the centrifugal pump, and since then, there have been no issues at all. *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps
• Positive Displacement Pump
• Special Pump

We would like to introduce a case study of a discharge machining system for fine orifices of turbine blades developed by a major machine tool manufacturer. Initially, a three-piston pump was used, and a problem arose when fine particles passed through the system's filter, causing issues with the pump. *For more details, please refer to the PDF document or feel free to contact us.*

• Other pumps
• Positive Displacement Pump
• Special Pump

We would like to introduce a case where "HydraCell" was implemented for handling abrasive lime slurry at a waste incineration power plant in South Korea. The difficult-to-handle fluid containing 20-30% abrasive solids cannot be processed with a single-screw pump, so for waste treatment, we use the "HydraCell G25 model" equipped with ceramic valve components, and the "HydraCell G10 model" during lime slurry injection. [Reasons for choosing the HydraCell G series] - Seal-less design with low maintenance requirements - Capable of dry running without damage *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps
• Positive Displacement Pump
• Special Pump

Here is a case study introduced to a paint manufacturer, a technical leader in the coating industry. The "HydraCell G Series" was adopted for the resin-based paint manufacturing line, with four pumps calculating and pressurizing the unique raw materials containing solid particles into the reaction vessel. All pumps, motors, and frequency converters had to be explosion-proof, but the HydraCell was chosen for its low initial cost, energy efficiency, and space-saving design. **Reasons for Choosing the HydraCell G Series:** - Capable of handling solids without wear - Maintains a constant discharge volume without pulsation - Operates across a wide speed range while maintaining measurement accuracy that exceeds API675 performance *For more details, please refer to the PDF document or feel free to contact us.*

• Other pumps
• Positive Displacement Pump
• Special Pump

We would like to introduce a case study of a power plant in Germany that uses the "HydraCell G25" pump. It is used for spraying ammonia in the flue gas desulfurization process. Due to the proven performance in this application, an additional four "HydraCell G25" pumps have been ordered for installation in a new power plant. [Reasons for Choosing the HydraCell G25] - Compact size - Low maintenance requirements - Low power consumption - Long-lasting durability *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps
• Positive Displacement Pump
• Special Pump

We would like to introduce a case study of a chemical manufacturer in the Czech Republic that has used the "G25 type Hydracell" pump for 18 months. This pump supplies respiratory chemical substances to the furnace. The medium varies depending on the chemical substances being produced and often contains particles. By switching to Hydracell, they successfully reduced costs. *For more details, please refer to the PDF document or feel free to contact us.*

• Other pumps
• Positive Displacement Pump
• Special Pump

We would like to introduce a case study of the introduction of HydraCell pumps to a printing machine manufacturer that supplies packaging equipment and related consumables. Previously, the AOD pump used for ink supply struggled to deliver high-viscosity ink, making it difficult to control at high pressure and low flow rates. The introduction of the G25 pump has resolved these issues. 【Pump Specifications】 ■ Pump Code: G25XKCGHFEYA ■ Liquid: Specialty printing ink ■ Flow Rate: 10-30 liters/min ■ Discharge Pressure: 12-15 bar *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps
• Positive Displacement Pump
• Special Pump

RO (reverse osmosis), NF, UF (ultrafiltration), and MF (microfiltration) are separation technologies that are widely used for desalination of seawater and purification of drinking water. This device is an application of these technologies in the production of dairy products. Since this separation does not involve heating, the flavor of the food is not compromised, and degradation does not occur. By selecting the appropriate membrane, it is possible to separate and concentrate various components. Additionally, the equipment is simple and compact, making it space-saving.

• Food Processing Equipment
• Beverage Production Equipment

The "MEY Stainless Steel Vessel" is a pressure vessel made by "MEY Corporation," a specialized manufacturer of stainless steel pressure vessels for the membrane separation field. It is used in a wide range of industries, including chemical, pharmaceutical, food, beverage, dairy, and wastewater treatment. We offer a wide lineup to choose from according to your application. 【Features】 ■ Made by MEY Corporation ■ Products active in various fields *For more details, please contact us or download the catalog.

• Stainless steel utensils and containers
• Other laboratory equipment and containers

The "Domestic FRP Vessel" is a pressure vessel that can demonstrate excellent performance across a wide range of applications. It can adapt to various membranes from different manufacturers using numerous conversion connectors, and the end plate materials can be selected from SUS304, SUS316, and SUS316L. Additionally, since it is produced domestically, we can respond quickly to the delivery of parts and other items. For standard products, immediate delivery is possible, so please feel free to consult us when needed. 【Features】 ■ High economic efficiency ■ Quick response for delivery of parts and other items ■ Adaptable to various membranes *For more details, please contact us or download the catalog.

• Stainless steel utensils and containers
• Other laboratory equipment and containers

The "ROPV FRP Vessel" is a pressure vessel manufactured by ROPV, a company with one of the largest scales in China and a complete quality management system. It has a wide range of sizes and pressure resistance, making it suitable for many applications, and the side port design reduces installation space and costs. Additionally, it features a highly economical, robust, and easy-to-assemble structure. Compared to other overseas products, it can be manufactured and delivered in a relatively short period of time. Please feel free to contact us. 【Features】 ■ Manufactured by ROPV ■ Compatible with many applications ■ Achieves reduction in installation costs *For more details, please contact us or download the catalog.

• Stainless steel utensils and containers
• Other laboratory equipment and containers

The "Codeline FRP Vessel" is a pressure vessel that can be easily and simply assembled. It achieves a reduction in installation space and costs through its side port design. It is highly economical and demonstrates excellent performance across various applications, and it can also accommodate heat-resistant and sanitary specifications. 【Features】 ■ Easy and simple assembly ■ Reduction in installation costs ■ Excellent performance across a wide range of applications *For more details, please contact us or download the catalog.

• Stainless steel utensils and containers
• Other laboratory equipment and containers

The "Microfiltration (MF) membrane" has a filtration performance that is more precise than ordinary filter paper and is capable of separating suspended substances and fine particles in solutions ranging from 0.1μm to 1μm. Since particles accumulate on the membrane surface, it can be reused repeatedly with regular cleaning. Additionally, when used as a pretreatment for RO systems, it can also remove suspended substances. 【Features】 ■ Can be used as a final filter for ultra-pure water ■ Pore size is absolute ■ Capable of removing suspended substances *For more details, please contact us or download the catalog.

• Processing Contract
• Beverage Production Equipment
• Water treatment equipment

The "Ultrafiltration (UF) membrane" is the optimal membrane element for the concentration and separation of substances such as proteins and polysaccharides, as well as for the removal of low molecular salts. It is capable of separating viruses, macromolecules, and colloidal substances from solutions. Additionally, its applications include the recovery of valuable substances, separation and concentration of milk, oil-water separation, and recovery of electrodeposition paints. Furthermore, we offer a diverse lineup tailored to various applications, so please feel free to consult us with your requests. 【Features】 ■ Separation of viruses, macromolecules, and colloidal substances in solutions ■ A lineup prepared according to your application *For more details, please contact us or download the catalog.

• Processing Contract
• Water treatment equipment
• Beverage Production Equipment

Reverse Osmosis (RO) membranes are membrane elements that allow water molecules in a solution to pass through while preventing most organic substances and salts from passing through the membrane. They can remove impurities in the original solution by 90-99%, making them ideal for purification processes such as tap water and drinking water treatment, as well as for purification in water supply, irrigation treatment, seawater desalination, and high-concentration wastewater treatment. Additionally, we provide a total service for membranes with immediate shipping due to our robust inventory system, so please feel free to consult with us. 【Features】 ■ Allows water molecules in a solution to pass through ■ Capable of removing impurities in the original solution by 90-99% ■ A diverse lineup is available *For more details, please contact us or download the catalog.

• Processing Contract
• Water treatment equipment
• Beverage Production Equipment

The "Nano Filtration (NF) membrane" is a membrane element capable of removing medium to high molecular weight organic substances smaller than 2 nm from solutions. Due to the charge characteristics of the membrane surface, monovalent ions can permeate while multivalent ions are removed, allowing for operation at lower energy than reverse osmosis (RO). Additionally, it is selected for various applications according to the desired water quality level, including the reduction of hardness components, pesticides, organic substances, and color components in the source water. We offer a diverse lineup. 【Features】 ■ Removes small medium to high molecular weight organic substances ■ Allows operation at lower energy than RO ■ A diverse lineup is available *For more details, please contact us or download the catalog.

• Processing Contract
• Water treatment equipment
• Beverage Production Equipment

The "HWS Series" is the optimal membrane element for use in various fields, including food and beverage, electrical components and semiconductor manufacturing processes, biopharmaceuticals, chemical purification, pharmaceuticals, and medical applications. By leveraging the maximum advantages of hot water sterilization cleaning, it meets product quality and industrial standards in manufacturing processes, enabling chemical-free (sterilization) cleaning. 【Features】 ■ Usable in a wide range of fields ■ Chemical-free (sterilization) cleaning possible ■ Hot water sterilization at up to 90°C possible *For more details, please contact us or download the catalog.

• Processing Contract
• Water treatment equipment
• Beverage Production Equipment

This catalog features products related to water treatment membranes handled by a company engaged in businesses deeply connected to the environment, including the design, manufacturing, installation, and assembly of devices applying functional membranes, as well as the export of special paper for functional membranes and the sale of chemicals for functional membranes. It includes a wide range of products, starting with various membrane elements, as well as pipe fittings and continuous electric regeneration ion exchange stacks. [Contents] ■ Products related to water treatment membranes *For more details, please contact us or download the catalog.*

• Water treatment equipment
• Wastewater/wastewater treatment equipment

E-Cell is a continuous electric regeneration ion exchange EDI stack from GE Water & Process Technologies. It removes ionic impurities remaining from RO treatment and achieves the absolute specifications required for ultra-pure water. E-Cell does not require regeneration treatment with acid/alkali like ion exchange resins, eliminating waste of strong acid/strong alkali and enabling environmentally friendly pure water production. All E-Cell stacks have obtained CE marking, CAS, and NRTL/C approvals.

• Pure water production equipment
• Other semiconductor manufacturing equipment
• Other surface treatment equipment

ROPV Corporation is the largest manufacturer of FRP pressure vessels in China, leading in production technology and equipped with a comprehensive quality management system. It boasts approximately 30% of the global market share for FRP pressure vessels. Due to its continuous focus on research and development and globalization, its future success is highly anticipated.

• Other semiconductor manufacturing equipment
• Pure water production equipment
• Separation device

Codeline has been continuously updating its technology to pursue high quality while producing products with high safety and reliability over the past few decades. As a manufacturer of pressure vessels for membranes in the water treatment industry, over 350,000 Codeline vessels are used worldwide, boasting the highest market share in the world.

• Water treatment equipment
• Wastewater/wastewater treatment equipment

The fouling components present in the supply water mainly consist of scale-forming components, colloidal components (such as clay), colloidal silica components, and metal oxides. When using conventional scale dispersants (preventatives) for pretreatment, there is a certain level of effectiveness; however, to maintain optimal performance, it is necessary to use high-quality, specialized fouling preventatives. HYPERSPERSETM scale dispersants (preventatives) and fouling dispersants (preventatives) demonstrate the best functionality for pretreatment in RO systems, and we propose a pretreatment program that ensures the RO system operates at its best, regardless of the type of supply water.

• Water treatment equipment
• Wastewater/wastewater treatment equipment

The heat-resistant membrane "HWS Series" includes RO and NF membrane elements, which can perform sterilization through hot water cleaning. It excels in heat resistance for high-temperature use, enabling sterilization of membrane elements in fields where chemical sterilization is not possible. The sterilization temperature can reach up to 90°C in low-pressure sterilization processes. The heat-resistant specification "HSRO Series" is an RO membrane that allows sterilization with hot water, in addition to having a sanitary structure. Due to its full-fit design, water retention is minimized, making it ideal for environments that require hygienic design. All components comply with FDA standards. *For more details, please contact us or download the catalog.

• Processing Contract
• Beverage Production Equipment
• Water treatment equipment

The "HydraCell T100 Series (Models T100K & T100M)" is a compactly designed HydraCell pump with a seal-less structure using a diaphragm. The seal-less design prevents issues such as external leaks and reduces maintenance costs associated with seal and packing replacements. It also accommodates low NPSH conditions, allowing operation under negative suction conditions! ☆ You can view case study materials for free from the link below ☆ 【Features】 ■ The hydraulically balanced diaphragm design allows for high-pressure operation without stress. ■ Achieves energy savings with higher pump efficiency compared to centrifugal pumps. ■ The robust design keeps maintenance costs low over an extended period. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Positive Displacement Pump
• Special Pump
• Other pumps