メステック Product Lineup

Generate a 2-axis tilt angle of 35 mrad using a stacked piezo as the drive source. High frequency characteristics enable fast step displacements and stability. Compact housing. Displacement linearity correction using strain gauge displacement sensors. Precise operation with an integrated elastic hinge. Options available for both mirrorless and mirror-equipped versions.

• Actuator
• Other machine elements

By moving the objective lens in the optical axis direction, focus adjustment can be made. High-resolution and high-speed positioning is possible with the piezo element. It employs an elastic guiding mechanism, eliminating areas of friction and wear. The accuracy remains stable over the long term and requires no maintenance.

• Actuator
• Other machine elements

The objective lens can be moved along the optical axis for focus adjustment. High-resolution and high-speed positioning are achieved with a humidity-resistant piezo element. An elastic guiding mechanism is employed, eliminating friction and wear, resulting in high straightness. Accuracy remains stable over the long term, with no maintenance required.

• Actuator
• Other machine elements

We offer strokes ranging from 20μm to 120μm. For more details, please contact us or download the catalog.

• Actuator
• Other machine elements

A unit that incorporates a laminated piezoelectric element into a linear guide mechanism using a monolithic elastic hinge. It can accommodate high rigidity, high-speed response, straightness, compact size, and high-precision displacement sensors. ● For more details, please contact us or download the catalog.

• Actuator
• Other machine elements

When the output is turned ON/OFF, it gradually reaches the required voltage. This protects loads such as piezo actuators. By equipping an expansion unit, closed-loop control is also possible (strain gauge sensor or capacitive sensor). With the addition of a USB interface, control from a PC is also possible. The incorporation of expansion units and interfaces allows us to meet various requests.

• power supply
• controller

Slow start function Wide band power supply (AC 100V to 240V) Can also be used as a stable external control variable power supply.

• power supply
• controller

Slow start function Wide band power supply (AC 100V to 240V) Can also be used as a stable external control variable power supply

• power supply
• controller

Compact: Small and vertical type. It can be installed even on narrow tabletops. Low Cost: Achieves approximately 25% cost reduction compared to conventional products. Low Noise: Generates less heat, resulting in very low noise without the use of a cooling fan. Energy Saving: Consumes less than half the current compared to conventional products, reducing running costs. Safe Design: Equipped with a "Slow ON/OFF function" that protects the piezo element during output ON/OFF.

• Other process controls
• power supply
• controller

By simply connecting this device to a piezo driver, it is easy to drive the BLT in resonance. Furthermore, even if the resonance frequency fluctuates during operation, it automatically tracks the resonance frequency, allowing it to always operate at maximum capacity.

• Other process controls
• power supply
• controller

The "AE Series" stacked piezoelectric actuators are ultra-compact piezo actuators focused on high-speed response. Utilizing the piezoelectric effect, these products convert electrical energy (voltage) into mechanical energy such as displacement or force. They achieve a high-speed response of one-third of the self-resonant frequency, making them suitable for ultra-precise positioning in optical devices and micro-manipulation, demonstrating high performance. Mestec Co., Ltd. develops various products (stages and piezo drivers) with a strong sense of responsibility to meet customer trust. For more details, please download the catalog.

• Testing Equipment and Devices
• Other FA equipment
• Other process controls

We offer a compact, multi-axis configurable single-axis piezo stage with X and Z axes. By combining multiple products, multi-axis configurations such as XYZ axes can also be achieved. The built-in displacement sensor type allows for extremely high-precision positioning when combined with a closed-loop piezo controller.

• Other FA equipment
• Actuator
• Other machine elements

It achieves motion without friction and excels in straightness. The displacement amplification mechanism generates a large stroke. It realizes nanometer high-resolution operation and millisecond high-speed response. For more details, please download the catalog.

• Other FA equipment
• Actuator
• Other machine elements

It achieves a high level of both long stroke range and high rigidity, enabling fast step movements. The built-in displacement sensor type can achieve extremely high precision positioning when combined with a closed piezo controller. You can choose from "high stability capacitive displacement sensors" or "low-cost strain gauge displacement sensors." We can also quickly respond to shape customization according to your application. For more details, please download the catalog or contact us.

• Other FA equipment
• Actuator
• Other machine elements

Can be mounted between the microscope's revolver and objective lens.

• Other process controls
• Actuator
• Other machine elements

The integrated elastic hinge mechanism operates with high precision and frictionless movement. The built-in displacement sensor type can achieve extremely high-precision positioning when combined with a closed piezo controller. We can also quickly respond to shape customization according to your application. For more details, please download the catalog.

• Other FA equipment
• Actuator
• Other machine elements

The built-in displacement sensor type allows for high-precision positioning when combined with a closed piezo controller. We can also quickly accommodate shape customization according to your application needs.

• Other FA equipment
• Actuator
• Other machine elements

The integrated elastic hinge mechanism enables frictionless operation and excellent straightness. For more details, please download the catalog.

• Other electronic parts
• Actuator
• Other machine elements

Slim 8mm with transparent window ● For more details, please contact us or download the catalog.

• Other process controls
• Actuator
• Other machine elements

It is a compact and lightweight stepping piezo stage that can be easily set up for SEM.

• Other machine elements

The SEM 3-axis nano manipulator "M-3917" is a compact and lightweight 3-axis nano manipulator for SEM that can be easily set up with SEM. It features both coarse motion mode and fine motion mode. For more details, please download the catalog.

• Other electronic parts

It can be used for precise angle control of optical mirrors and similar applications. The built-in displacement sensor type allows for extremely high-precision positioning when combined with a closed piezo controller. For more details, please download the catalog.

• Other electronic parts
• Actuator
• Other machine elements

We can also accommodate customizations to suit your needs. For more details, please download the catalog or contact us.

• Other process controls
• Actuator
• Other machine elements

There is a large transparent window in the center of the movable part that allows for the introduction of the optical axis.

• Other process controls
• Actuator
• Other machine elements

The built-in displacement sensor type enables high-precision positioning when combined with a closed piezo controller. For more details, please download the catalog or contact us.

• Other FA equipment
• Actuator
• Other machine elements

The built-in displacement sensor type enables high-precision positioning when combined with a closed piezo controller. For more details, please download the catalog or contact us.

• Testing Equipment and Devices
• Other FA equipment
• Other process controls

It can be used in places where oil is present.

• Other FA equipment
• Actuator
• Other machine elements

The integrated elastic hinge mechanism enables frictionless operation and exhibits excellent straightness. It is utilized in nano-positioning and various types of microscopes, demonstrating high performance. While the built-in displacement sensor type is not available, it is possible to install an external displacement sensor for closed-loop displacement control, so please feel free to consult us.

• Other FA equipment
• Actuator
• Other machine elements

You can use the precision machining tool for precision positioning in areas where oil is present. The built-in displacement sensor type can achieve extremely high precision positioning when combined with a closed piezo controller. For more details, please download the catalog or contact us.

• Other electronic parts
• Actuator
• Other machine elements

You can adjust the focus by moving the objective lens in the direction of the optical axis.

• Other FA equipment
• Actuator
• Other machine elements

The stacked piezo actuators are embedded in a metal case with a pre-compression force applied. - MPA-UA series: Maximum generated force 850N - MPA-UB series: Maximum generated force 1700N - MPA-UC series: Maximum generated force 3500N - MPA-UD series: Maximum generated force 7000N - MPA-UE series: Maximum generated force 20000N The type with built-in displacement sensors allows for high-precision positioning when combined with a closed piezo controller. For more details, please download the catalog or contact us.

• Other FA equipment
• Actuator
• Other machine elements

Low-cost single-axis piezo actuator

• Other FA equipment
• Actuator
• Other machine elements

1-axis piezo actuator Please contact us.

• Other FA equipment
• Actuator
• Other machine elements

High-speed response and high precision position resolution.

• Other FA equipment
• Actuator
• Other machine elements

It has features such as high-speed response, frequency characteristic switching, and output inversion capability. It is ultra-compact and low-cost, making it ideal for device integration.

• Other electronic parts
• Sensors
• controller

Ultra-compact and low-cost Number of channels: 1ch Output voltage: ±10V (adjustable range ±5V)

• Other process controls
• Sensors
• controller

Number of channels: 1 ch Output voltage: ±150V Wideband DC amplifier

• Other process controls

Input is 2 systems/channels - A input: non-inverting input (with respect to output) - B input: inverting input (with respect to output)

• Other process controls
• power supply
• controller

Piezo driver open-loop control

• Other process controls

When the output is turned ON/OFF, it gradually reaches the required voltage. This protects loads such as piezo actuators. By equipping an expansion unit, closed-loop control is also possible. With the inclusion of a USB interface, control from a PC is also possible. The expansion unit and interface allow us to meet various requests.

• Other FA equipment
• power supply
• controller

Compatible with capacitance sensor (C) and strain gauge sensor (S) Number of channels: 1ch, 3ch Output voltage: -50 to 150V

• Other process controls
• power supply
• controller

Number of channels: 1ch, 3ch OPEN/CLOSED: Feedback switch Output voltage: -10V to +150V (BNC connector)

• Other process controls
• power supply
• controller

Number of channels: 1 ch Output voltage: -10V to +150V (BNC connector)

• Other process controls
• power supply
• controller

By equipping our standard piezo driver M-2629 series with the M-5106 servo unit, feedback control of the piezo stage using up to three-axis strain gauge sensors is possible. Furthermore, by incorporating the capacitive displacement sensor M-2218, feedback control using capacitive displacement sensors is also achieved. It can be mounted on a JIS rack and is compatible with "piezo with built-in strain gauge sensors (from various manufacturers)."

• Testing Equipment and Devices
• Other FA equipment
• Other process controls

You can select a model that meets your requirements from the models (2501-1/2502-1/2503), and we believe we can accommodate almost all requests, from low-speed stage drives (below several tens of Hz) to high-speed, high-current drives. We can also respond to requests for the number of channels, shapes, and other special options. An option is also available to use a displacement sensor for position feedback.

• power supply
• controller