スガツネ工業 List of Products and Services

● It can be attached to an aluminum frame with just one screw. ● Since no nuts are required and pre-positioning is unnecessary, work time can be reduced. ● It can be widely used with aluminum frames from various manufacturers (some may not be compatible). ● It has a neat appearance, making enclosures and devices look beautiful. ● There is also a type that can be added to an aluminum frame later (for one groove). ● There is a type with screw holes for attaching panels. ● A version for two grooves is also available in the lineup.

● The combination of the fastener and band allows for strong tightening and quick release. ● It comes with a length adjustment screw for the band. ● It is designed to prevent accidental release with a sealing pin. ● There is also a type available that can accommodate pipe diameters up to 655mm.

● The combination of the fastener and band allows for strong tightening and quick release. ● It comes with an adjustable screw for band length. ● It is designed to prevent accidental release with a sealing pin. ● The compatible pipe diameter for installation is 370 to 655 mm. * There is also a type compatible with pipe diameters of 70 to 375 mm.

◇Features of DST (Dirac Snap Technology)◇ 1. No screws or welding required Anyone can easily assemble it! Since there is no welding, there are no work mistakes or variations in the quality of the finished product. Maintenance such as re-tightening screws is also unnecessary for a long time! 2. Excellent strength The product attached to the sheet metal will not break even when pulled with a force of 390 kg! (Strength may vary depending on the product.) 3. Compatible with a wide range of sheet thicknesses Compatible sheet thickness: 0.5 mm to 5.5 mm Expands the variety of hardware for assembly.

● Achieves one-touch installation with sufficient strength. No screws or welding are required. For details, please refer to the DST series introduction. ● Just by installing it, the earth clip scrapes the paint off the mounting surface, allowing the joined panels and fasteners to conduct electricity, functioning as grounding between the panels. ● Can connect two or more adjacent panels.

● Due to the snap-in design, screws, nuts, and washers are not required. For details, please refer to the introduction of the DST series. ● This is a fastener that allows you to easily attach panels and other items to the enclosure with one touch. When installing, please push until you hear a click without using any tools. ● Thanks to the temporary holding spring, the panel will not fall off even after being removed from the enclosure.

● No screws, nuts, or washers are required due to the snap-in design. Please refer to the DST series introduction for details. ● This is a fastener that allows for easy one-touch installation of panels and other components onto the enclosure. ● The head can be rotated with a finger or a Phillips screwdriver for removal. ● Thanks to the temporary holding spring, the panel will not fall off even after being removed from the enclosure. ● By using the separately sold H-type washer, installation can be done with the same panel processing holes as the processing holes in the enclosure.

● Since welding is not required and installation time can be significantly reduced, cost savings can be achieved. ● It is possible to join two or more adjacent panels. ● By using a special tool, the panels can be removed from the outside.

● No screws, nuts, or washers are required due to the snap-in design. Please refer to the DST series introduction for details. ● Since welding is not necessary, installation time can be significantly reduced, leading to cost savings. ● It is possible to connect two adjacent panels or three or more panels. ● A new compatible total plate thickness type of 4.2 to 6.2 has been added.

● No screws, nuts, or washers are needed due to the snap-in design. Please refer to the DST series introduction for details. ● Since welding is not required, installation time is significantly reduced, leading to cost savings. ● Two adjacent panels can be joined together.

● It is a ball joint type torque unit with a wide range of motion. ● It has a structure that is resistant to sagging even after repeated use. ● It has passed 50,000 operation tests. ● A new compact type, the SJ200 model, has been added.

◆For Sheet Metal Assembly◆ 【DST Dirac Snap Technology】 Using a fastening method with two wings and a spring, installation is easy—just push the product into the mounting hole until it clicks. Three Features 1. No tools required. Just click it in by hand! Compared to traditional methods, assembly costs were reduced to one-third of screw fastening and one-fifth of welding. *According to Sugatsune research. 2. Easy to remove! Used for maintenance covers that require attachment and detachment during equipment inspections. 3. Excellent strength and peace of mind! There are cases where the sheet metal bent before the fastening mechanism even at a pulling force of 400 kg! ◆For Aluminum Frame Assembly◆ 【Joint System PJ Type】 Pinch, fit into the groove, and secure with a screw. You can fasten aluminum frames with this simple step. Three Features 1. No nuts required! Fastening is complete with just one screw! Compared to conventional fastening methods, assembly time was reduced by 56%. *According to Sugatsune research. 2. Can be added later! You can easily add aluminum frames to already assembled frames. 3. Compatible with various aluminum frames! Supports groove widths of 6mm, 8mm, and 10mm. Please contact us for details.

This is a component that locks and fastens sheet metal together using a cam. It is ideal for securing maintenance covers on devices and equipment! ↓↓ Four reasons to choose cam lock fasteners ↓↓ (1) Reduced working time Panels can be attached and detached with a single push. (2) Aesthetic design The flat type fits flush with the mounting surface. (3) Prevention of part loss Parts do not fall off, eliminating the risk of loss unlike screws. (4) Resistant to loosening from vibration There is no risk of loosening due to vibrations. *Information as of August 2022. *For more details, please contact us or download the catalog.

【Camlock Fastener】5 Key Points (1) Reduces working time Panels can be attached and detached with a single push. (2) Types to choose from based on purpose "Button type" that can be easily pressed with a finger "Flat type" that prevents accidental operation even in narrow working spaces are available. (3) Loss prevention The plug remains attached even when the panel is removed, eliminating the risk of loss. (4) Dedicated brackets for aluminum frames are also available By using these, you can easily implement them in enclosures built with aluminum frames. (5) New space-saving design The socket part has been shortened to 20mm, reducing interference with internal components. *Information as of November 2025.