スガツネ工業 List of Products and Services

For preventing equipment from tipping over! This is an adjustable device with a seismic isolation structure.

●This is an adjuster that automatically eliminates the wobbling of table legs caused by uneven floor surfaces using a special viscoelastic material. ●It works effectively without hassle when rearranging tables or similar tasks.

● The bottom has a cross hole for a Phillips screwdriver, making it easy to install with an impact wrench. ● The bottom material of the ADWS type is chloroprene rubber, which has excellent weather resistance. ● The bottom material of the ADWHS type is ethylene propylene rubber, which has excellent heat resistance and weather resistance. It is also a material that is difficult to transition.

● The tilting mechanism with approximately 10° allows it to remain level even on sloped floors. ● The load is distributed by the tilting mechanism, providing durability. ● Due to the double structure of the main body and the base, height adjustment can be performed by hand even under load conditions. Height adjustment can also be done with a wrench.

● It has been treated to prevent seizing. ● The bottom is made of non-slip nitrile rubber, so it won't damage the floor.

● We have applied anti-seizing treatment. ● We can accommodate different screw lengths and diameters (M16, M20, M24) in response to orders, and steel versions are also available (minimum lot of 10 pieces).

● It has a treatment to prevent seizing. ● The bottom is made of non-slip nitrile rubber, so it won't damage the floor. ● With a swivel mechanism that tilts approximately 40°, it remains level even on sloped surfaces. Additionally, it distributes the load, enhancing durability.

● It is treated to prevent seizing. ● Equipped with a swivel mechanism that tilts approximately 40°, it remains level even on sloped floors. Additionally, it excels in durability due to the distribution of weight.

There are three types of heavy-duty adjusters: the ADH type made of steel, the ADHS type made of stainless steel, and the ADHSK type made of stainless steel with anti-seizing treatment applied to the threaded part. (Refer to the anti-seizing treatment below.) The ADHSK type allows for smooth vertical adjustments due to the anti-seizing treatment.

●Made of high-quality glass fiber reinforced polyamide. ●It has excellent durability, chemical resistance, weather resistance, and abrasion resistance. ●The support holes accommodate φ50.8 supports with a tapered tip.

● The design has a flat surface that is resistant to dirt. ● There are two finishes available: white and mirror polish. ● The HS-550M10 model is an M10 type with a screw-in caster of the FA55N type, while the HS-550M12 model is recommended for use with the EX-100N type caster with a display.

●The main body is made of a lightweight and durable aluminum alloy, suitable for recycling. ●The post holes accommodate posts with a tapered tip of φ50.8.

● Ultrasound machine carts, medical equipment carts, roll stands, infusion pump stands, etc., come in a wide variety and are optimally designed for each application. They help improve the efficiency of daily operations. ● By combining accessories, they can be used for various purposes.

● The main body of the adjuster has a swivel mechanism that allows for approximately 10° of tilt. It can maintain a level position even on sloped surfaces. ● The swivel mechanism distributes the load, providing durability. ● The bottom is made of non-slip elastomer, which does not damage the floor.

● This is an unparalleled high-load adjuster with a maximum load of 11,000 kgf per unit. ● It has been treated to prevent seizing. ● The threaded part is a trapezoidal screw, available from Tr42 to Tr60. ● With bearings included, level adjustment can be performed smoothly.

● This is an unparalleled high-load adjuster with a maximum load of 11,000 kgf per unit. ● It has been treated to prevent seizing. ● Equipped with a swivel mechanism that allows for approximately 40° of movement, it maintains a level position even on sloped surfaces. Additionally, it excels in durability due to load distribution. ● The threaded part features trapezoidal threads, available from Tr42 to Tr60.

● The screw part has a swivel mechanism that allows for approximately 10° of tilt, ensuring it remains level even on sloped floors. ● The swivel mechanism distributes the load, providing durability. ● Due to the double structure of the main body and the base, height adjustments can be made by hand even under load conditions. Height adjustments can also be made with a wrench. ● The base is made of non-slip elastomer material.

● The main body of the adjuster has a swivel mechanism that allows for approximately 10° of movement. It can maintain a level position even on sloped surfaces. ● The swivel mechanism distributes the load, providing durability. ● The main body and the base have a double structure, allowing for height adjustment by manually rotating the main body even under load.

● The main body and the base can rotate independently, allowing for adjustments while remaining in place. ● The base is made of polyurethane, which is less likely to damage the floor surface.

●The main body of the adjuster has a swivel mechanism that allows for approximately 10° of tilt. It can maintain a level position even on sloped surfaces. ●The swivel mechanism distributes the load, providing durability. ●Due to the double structure of the main body and the base, height adjustments can be made by hand even when under load. ●The base is made of non-slip elastomer, which prevents damage to the floor.

The bottom is made of polypropylene, which will not damage the floor surface.

●The main body of the adjuster has a swivel mechanism that allows for approximately 10° of tilt. It can maintain a level position even on sloped surfaces. ●The swivel mechanism distributes the load, providing durability. ●The main body and the base have a double structure, allowing for height adjustment by manually rotating the main body even when under load.

● Comes with a bottom cover made of shock-resistant elastomer. ● The hex nut is press-fitted from the bottom of the tray, allowing for easy installation with an impact wrench. ● For special sizes, please contact us.

● Since a hex nut is press-fitted into the bottom of the receptacle, it can be easily installed using an impact wrench or similar tools. ● With a wide variety of sizes available, you can choose according to your needs.

● The bottom is equipped with a non-slip, shock-resistant nitrile rubber cover that won't damage the floor. ● The bottom of the main body has cross-shaped holes, allowing for easy installation with an air driver or similar tool.

● The hex nut is press-fitted at the bottom of the main body, allowing for easy installation with an impact wrench or similar tools. ● The AD-503KB comes with a non-slip elastomer cover.

There is also a cover that can be attached to the bottom to prevent damage to the floor.

● We also accept custom specifications for surface, dimensions, etc. ● Height adjustment is possible using a driver with the cross hole on the top of the screw (M8 specification) or the flat head (M10 specification). ● There is also a cover that can be attached to the bottom to prevent damage to the floor.

The bottom is made of polypropylene, which will not damage the floor surface.

● A new product made of slip-resistant ethylene-vinyl acetate (EVA) has been added (products that include GP in the model number). ● It features a slim design that does not compromise the appearance of the housing. ● To make installation easier, the outer perimeter of the bottom has anti-slip features. ● The bottom is equipped with a cross hole for convenient installation.

● The threaded part has a swivel mechanism of about 30°, allowing it to remain level even when the legs are at an angle or when the floor surface is sloped. ● The base is made of polyamide. ● There is also an RP type with a steel threaded part.

●This is an adjuster that automatically eliminates the wobbling of table legs caused by uneven floor surfaces using a special viscoelastic material. ●It works effectively without hassle during rearrangements of tables. ●The automatic adjustment feature has two adjustment ranges: 3mm and 6mm. ●Since it matches the same screw diameter as existing adjusters, replacing them with SAJ adjusters is easy.

Since the entire device is black, it does not compromise the design of the equipment.

● The screw part has a swivel mechanism of about 8°, allowing it to maintain a level position even on sloped floors. ● The bottom is made of polypropylene, which does not damage the floor, and features a cross hole for easy installation and adjustment.

● This is an adjuster with a black chromate treatment. ● The threaded part has a swivel mechanism of about 6°, allowing it to maintain a level position even on sloped surfaces. ● The swivel mechanism distributes the load, providing durability. ● Due to the double structure of the main body and the bottom, height adjustment can be performed with a wrench even under load. ● The bottom is made of non-slip elastomer and features a hexagonal hole for convenient installation and adjustment.

● The main body of the adjuster has a swivel mechanism that allows for approximately 10° of rotation. It can maintain a level position even on sloped surfaces. ● The swivel mechanism distributes the load, providing durability. ● To facilitate installation, the outer edge of the base is equipped with anti-slip features. ● The main body and base have a double structure, allowing for height adjustment by turning the main body even when under load. ● The base is made of a non-slip elastomer material, which does not damage the floor surface.

The new adjuster suitable for environments where hygiene management is required has arrived, meaning "hygienic" in English. Since it is easy to clean even when dirt adheres, cleaning time can be reduced, and it is less likely for bacteria to remain. It meets the 3A food hygiene standards, which are essential for food machinery in Europe and the United States, and has a wealth of achievements overseas.

The term "hygienic," which means "clean" in English, refers to a new grommet that is ideal for foreign matter contamination prevention! It contains metal powder and is made of blue silicone, making it easy to detect in case it accidentally contaminates the food production line.

The term "hygienic," which means "clean" in English, introduces a hinge that leads to a reduction in cleaning time! ● Two finishes that contribute to a reduction in cleaning time: "glossy polish" and "shot blast." ● Since there are no exposed screws on the surface, cleaning is easy.

The term "hygienic," which means "clean" in English, has a new handle that leads to reduced cleaning time! ● The glossy polish makes it easy to wipe off dirt. ● It is ideal for environments that require hygiene management, such as food factories. ● It uses materials specified under the Food Sanitation Act.

● Due to the snap-in design, screws, nuts, and washers are not required. For details, please refer to the introduction of the DST series. ● When pushed in, it locks with a "click" sound, eliminating any issues with insufficient tightening like with screws. ● Thanks to the temporary fixing spring, this product will not fall off even after removing the panel from the housing. ● The panel can be attached to the housing using a Phillips screwdriver. ● The spring mechanism allows for a wide range of mounting thicknesses from 0.5 to 5.5 mm. ● By using the separately sold H-type washer, it can be mounted with the same panel processing hole as the processing hole of the housing.

● Due to the snap-in design, screws, nuts, and washers are not required. For details, please refer to the introduction of the DST series. ● This is a fastener that allows you to easily attach panels and other items to the enclosure with one touch. When installing, please push until you hear a click without using any tools. ● Thanks to the temporary holding spring, the panel will not fall off even after being removed from the enclosure.

● No screws, nuts, or washers are required due to the snap-in design. Please refer to the DST series introduction for details. ● This is a fastener that allows for easy one-touch installation of panels and other components onto the enclosure. ● The head can be rotated with a finger or a Phillips screwdriver for removal. ● Thanks to the temporary holding spring, the panel will not fall off even after being removed from the enclosure. ● By using the separately sold H-type washer, installation can be done with the same panel processing holes as the processing holes in the enclosure.

● The insert can be easily removed just by rotating it by hand. ● The spring mechanism allows for a wide range of mounting thicknesses from 0.5 to 5.5 mm. ● No screws or nuts are required due to the snap-in design. Please refer to the DST series introduction for details. ● When pushed in, it locks with a "click" sound, eliminating the risk of insufficient tightening like with screws. ● Thanks to the temporary holding spring, this product will not fall off even after the panel is removed from the housing.

● This is a polyamide fastener that secures two panels with a single touch. ● No tools are required for installation; just make a square hole. ● There are two types of installation processing holes: □9.5mm and □12.7mm.