スガツネ工業 List of Products and Services

● The hex nut is press-fitted at the bottom of the main body, allowing for easy installation with an impact wrench or similar tools. ● The AD-503KB comes with a non-slip elastomer cover.

• Other machine elements

● The bottom is equipped with a non-slip, shock-resistant nitrile rubber cover that won't damage the floor. ● The bottom of the main body has cross-shaped holes, allowing for easy installation with an air driver or similar tool.

• Other machine elements

● Since a hex nut is press-fitted into the bottom of the receptacle, it can be easily installed using an impact wrench or similar tools. ● With a wide variety of sizes available, you can choose according to your needs.

• Other machine elements

● Comes with a bottom cover made of shock-resistant elastomer. ● The hex nut is press-fitted from the bottom of the tray, allowing for easy installation with an impact wrench. ● For special sizes, please contact us.

• Other machine elements

●The main body of the adjuster has a swivel mechanism that allows for approximately 10° of tilt. It can maintain a level position even on sloped surfaces. ●The swivel mechanism distributes the load, providing durability. ●The main body and the base have a double structure, allowing for height adjustment by manually rotating the main body even when under load.

• Other machine elements

●The main body of the adjuster has a swivel mechanism that allows for approximately 10° of tilt. It can maintain a level position even on sloped surfaces. ●The swivel mechanism distributes the load, providing durability. ●Due to the double structure of the main body and the base, height adjustments can be made by hand even when under load. ●The base is made of non-slip elastomer, which prevents damage to the floor.

• Other machine elements

● The main body of the adjuster has a swivel mechanism that allows for approximately 10° of rotation. It can maintain a level position even on sloped surfaces. ● The swivel mechanism distributes the load, providing durability. ● To facilitate installation, the outer edge of the base is equipped with anti-slip features. ● The main body and base have a double structure, allowing for height adjustment by turning the main body even when under load. ● The base is made of a non-slip elastomer material, which does not damage the floor surface.

• Other machine elements

● This is an adjuster with a black chromate treatment. ● The threaded part has a swivel mechanism of about 6°, allowing it to maintain a level position even on sloped surfaces. ● The swivel mechanism distributes the load, providing durability. ● Due to the double structure of the main body and the bottom, height adjustment can be performed with a wrench even under load. ● The bottom is made of non-slip elastomer and features a hexagonal hole for convenient installation and adjustment.

• Other machine elements

● The screw part has a swivel mechanism of about 8°, allowing it to maintain a level position even on sloped floors. ● The bottom is made of polypropylene, which does not damage the floor, and features a cross hole for easy installation and adjustment.

• Other machine elements

Since the entire device is black, it does not compromise the design of the equipment.

• Other machine elements

● The threaded part has a swivel mechanism of about 30°, allowing it to remain level even when the legs are at an angle or when the floor surface is sloped. ● The base is made of polyamide. ● There is also an RP type with a steel threaded part.

• Other machine elements

●This is an adjuster that automatically eliminates the wobbling of table legs caused by uneven floor surfaces using a special viscoelastic material. ●It works effectively without hassle during rearrangements of tables. ●The automatic adjustment feature has two adjustment ranges: 3mm and 6mm. ●Since it matches the same screw diameter as existing adjusters, replacing them with SAJ adjusters is easy.

• Other machine elements

● A new product made of slip-resistant ethylene-vinyl acetate (EVA) has been added (products that include GP in the model number). ● It features a slim design that does not compromise the appearance of the housing. ● To make installation easier, the outer perimeter of the bottom has anti-slip features. ● The bottom is equipped with a cross hole for convenient installation.

• Other machine elements

The bottom is made of polypropylene, which will not damage the floor surface.

• Other machine elements

The bottom is made of polypropylene, which will not damage the floor surface.

• Other machine elements

● The combination of the fastener and band allows for strong tightening and quick release. ● It comes with a length adjustment screw for the band. ● It is designed to prevent accidental release with a sealing pin. ● There is also a type available that can accommodate pipe diameters up to 655mm.

• Other machine elements

Introducing some of our featured products Stainless Steel Ultra-Thin Magnet Catch MC-YN015S, MC-YN015SP ● With a thickness of 2.2mm, its ultra-thin size does not obstruct and allows for effective use of space. ● Made of stainless steel and additionally coated with epoxy resin on the magnet, it offers excellent rust resistance. ● Rivet installation is also possible. Silicone Magnet Catch MC-MS45 Type ● The magnet is wrapped in silicone rubber, which reduces impact noise during adhesion. ● Uses neodymium magnets. Compact yet offers high adhesion strength. ● The main body has a washer fitted into the fixing hole for reinforcement, making it less likely for the silicone rubber to tear during screw fastening. Hygienic Silicone Magnet Catch MC-MSH Type Made with Food Sanitation Law Compliant Materials ● The main body is made from materials that comply with the container packaging standards test for rubber products (excluding nursing equipment) as stipulated by the Food Sanitation Law. ● The body is a rare blue color in nature, making it easy to detect in case of accidental contamination with food, and other components can be detected by metal detectors. ● The magnet is wrapped in silicone rubber, which reduces impact noise during adhesion.

• Other machine elements
• Beverage Production Equipment
• Food Packaging Machinery

● Due to its compact design, it can be used in various locations. ● It is suitable as a guide rail for mobile bodies that do not require precision. ● The anodized treatment provides excellent corrosion resistance. ● It is grease-free. The carriage (sold separately) uses a resin with good wear resistance and sliding properties. ● Temporary holding and positioning clamps are available as optional items. By rotating the clamp knob and making contact with the side of the rail, the position of the carriage can be easily fixed. *This information is as of February 2023. For details, please contact us or download the catalog.*

• Other cleaning machines

- Introducing some of the featured products - Slide Rail 3670 ● This is a slide rail with a self & soft-closing mechanism. ● For rail lengths of 300mm or more, the inner member can be fully extended with a lever operation. ● Thanks to the shock absorption effect at the outer member mounting part, smooth sliding is achieved even with slight deformations of the cabinet. Slide Rail 3660 ● The drawer opens simply by pushing the front panel. Therefore, handles or knobs are unnecessary, resulting in a flat design for the cabinet. ● With minimal push force, even when both hands are occupied with items, the drawer can be easily opened by slightly pushing the front panel with an elbow or similar. Mini Slide Rail SCR3 ● This is a three-stage slide rail. ● It features a mechanism that minimizes ball creep, resulting in a rail with little change in operating force. ● With a height dimension of just 15.5mm and a design that reduces deflection, it can be used in various locations.

• Other conveying machines
• Other machine elements

● This is a three-stage slide rail that can fully extend the inner member. ● The inner member can be removed with a button operation. ● The position where the self-closing mechanism operates is 20mm before the fully closed position. ● It simply holds that state when the rail is fully closed.

• Other machine elements

● This is a gold-plated version of the slide rail 3670. ● It is a three-stage slide rail that allows the inner member to be fully extended. ● The position where the self and soft-closing mechanism operates is 20mm before the drawer is completely closed for rail lengths up to 350mm, and 36mm before for rail lengths of 400mm or more. ● The inner member can be removed with a lever operation. ● The maximum width of the drawer is the rail length plus 200mm. ● Thanks to the shock-absorbing effect at the outer member mounting part, smooth sliding is achieved even with slight deformation of the cabinet. ● It comes with a resin spring that absorbs noise and shock. ● There is also a type with a rail width of 45.5mm in gold plating.

• Other machine elements

● Since it uses a special polyethylene resin with good sliding characteristics, there is no need for the application of grease or oil. ● The special polyethylene resin has excellent chemical resistance and is stable against various chemical agents. ● The flame retardancy is UL94HB. ● MR-30CS is exclusively for the mini guide rail model MRS30.

• Other machine elements

●Made of lightweight and durable aluminum alloy. ●Excellent corrosion resistance due to anodizing treatment. ●Recyclable.

• Other machine elements

● This is a temporary holding and positioning clamp for the mini guide rail type MRS. ● It simply fixes the rail side by pressing it with this product. ● It is attached to the mini guide carriage type MR with screws.

• Other machine elements

● This is a temporary holding and positioning clamp for the mini guide rail type MRS. ● It simply fixes the rail side by pressing it with this product. ● It is attached with screws to the mini guide carriage type MR.

• Other machine elements

● This is a temporary holding and positioning clamp for the mini guide rail type MRS. ● It simply fixes the rail side by pressing it with this product. ● It is attached to the mini guide carriage type MR with screws.

• Other machine elements

●This is a 3-stage sliding rail. ●It is designed with a mechanism that minimizes ball creep, resulting in less variation in operating force. ●With a height dimension of 15.5mm, it has a design that reduces deflection, making it suitable for various locations. ●It uses grease for food machinery (NSF H1 registered product).

• Other machine elements

● This is a 3/4 slide, 2-stage pull, dual travel slide rail. ● With a height dimension of 15.5mm, it has a compact design that minimizes deflection, making it suitable for various applications. ● It uses grease for food machinery (NSF H11 registered product).

• Other machine elements

● The height dimension is small at 15.5mm, and the design minimizes deflection, allowing it to be used in various locations. ● It uses grease for food machinery (NSF H1 registered product).

• Other machine elements

It is installed with the screws included with the carriage LGB-30CM.

• Other machine elements

●This product is designed to prevent the carriage LGB-30CM from falling off. ●It is installed with screws onto the guide rail model LGB30. Please prepare the installation screws yourself.

• Other machine elements

● For moving bodies without detailed requirements, such as sliding doors for safety fences and transport guides between processes. Sugatsune's LGB30 type can be widely used as guide rails for moving bodies that do not require precision. ● It features smooth movement due to the use of bearing rollers. ● It is a quiet type that uses resin outer ring bearing rollers.

• Other machine elements

● This is a bottom pull type with rails attached to the bottom of the drawer. ● The slide rails are not visible on the body side when the drawer is pulled out. ● The outer member can be removed with lever operation. ● The thickness of the main body is only 19.5mm, making it slim.

• Other machine elements

Compact yet high load capacity Smooth sliding rails for easy loading and unloading of heavy items 【Features】 ○ Compact size (rail height 46.7mm, thickness 12.7mm) ○ Despite high load capacity, the thin rail thickness allows for more internal space in the housing, enabling smooth loading and unloading of heavy items ○ 3-stage pull-out design allows for complete extraction of the inner rail ○ Rail attachment and detachment can be done with lever operation ○ The detachment lever is compatible for both left and right sides ● For other functions and details, please download the catalog.

• Other machine elements

The thickness of the rail is only 8.3mm Ultra-thin three-stage slide rail with a pull-out length of 2 inches 【Features】 ○ The rail can extend an additional 2 inches An ultra-thin three-stage slide rail with a thickness of just 8.3mm ○ The rail locks in the fully extended position Easy release and attachment of the rail with a user-friendly lever ● For other functions and details, please download the catalog.

• Other machine elements

● This is a 3/4 slide two-stage pull-out slide rail. ● It can simply hold its position when the rail is fully extended. ● Made of aluminum extrusion, it has minimal deflection and is compact and lightweight.

• Other machine elements

●This is a three-section sliding rail. ●It is made of aluminum extruded material, which has minimal deflection and is compact and lightweight.

• Other machine elements

●This is a three-stage sliding rail. ●It temporarily holds its position when the rail is fully extended. ●Made of aluminum extrusion, it has minimal deflection and is compact and lightweight.

• Other machine elements

● This is a 3/4 slide, double-stage pull, and dual travel slide rail. ● The retainer prevents contact between the balls, resulting in minimal play and smooth sliding. ● With a height dimension of 16mm and a design that minimizes deflection, it can be used in various locations. ● The outer member and inner member are made of aluminum alloy extrusions, making them lightweight.

• Other machine elements

● This is a three-stage slide rail that can fully extend the inner member. ● When the rail is fully opened, it locks in that position. It can be released by operating the lock release lever. ● The inner member can be removed by operating the lock release lever. ● The lock release lever is located near the tip of the inner member (within reach), making it easier to operate and safer as it reduces the risk of pinching fingers. ● The number of steel balls is greater compared to other rails, resulting in smooth movement. ● The inner member has many mounting holes, allowing for various installation positions to be chosen.

• Other machine elements

● This is a 3/4 slide two-stage pull-out slide rail. ● It locks in place when the rail is fully extended. It can be released by operating the lock release lever. ● The inner member can be removed by operating the lock release lever. ● The lock release lever is located near the tip of the inner member (within reach), making it easier to release the lock and safer as it is less likely to pinch fingers. ● The number of steel balls is greater compared to other rails, resulting in smoother movement. ● The inner member has many mounting holes, allowing for various installation positions to be chosen.

• Other machine elements

It is a 3/4 slide two-stage pull-out slide rail.

• Other machine elements

It is a three-stage sliding rail that can fully extend the inner member.

• Other machine elements

It is a 2-stage pull-out slide rail with a 3/4 slide.

• Other machine elements

● It is a 3/4 slide two-stage pull-out slide rail. ● When the rail is fully closed, it temporarily holds that state.

• Other machine elements