光昭 List of Products and Services

To reduce the burden of cable laying work! This product excels in three aspects: shorter work time, reduced effort, and safe operation compared to conventional products. Working with hard CV (CVT) cables in a narrow panel is tough, isn't it? They bounce back and don't hold their shape, and it's too cramped to hold them down... By re-evaluating the conductor processing method of Sumitomo Electric's HST cable, we have created a softer cable. The rebound rate is less than 45% of conventional products. It bends easily with light force and stays in place perfectly due to its excellent shape retention. The drum winding is also easy to straighten out! Figure-eight winding is a breeze.

【Easy】 We have improved the insulating material. It does not harden even in low-temperature environments, making it easier to insert the knife! It can be stripped with half the force compared to conventional materials. 【Soft】 In addition to improving the insulating material, we have enhanced workability by innovating the conductor configuration. 【Light】 We have achieved approximately 50% weight reduction compared to conventional copper conductor cables of the same size. *Conductivity: Copper (Cu) 97 ⇔ Aluminum (Al) 60. Due to this difference, the current capacity is inferior. When matched with copper conductor CV cables, it will increase by 1 to 2 sizes, but it can still achieve about 30% weight reduction. Therefore! Moving the drum is easy! It contributes to labor-saving and efficiency.

Proven track record of over 25 years since its release. This is the 300V VCT-F type from the "Sunlight" series, synonymous with "soft and oil-resistant cables." Please use it widely and generically for wiring in various machines and devices where oil resistance, flexibility, and weather resistance are required for movable wiring. 【Features】 ■ Sheath: Black, oil-resistant, weather-resistant, flame-retardant, flexible, non-migrating. ■ Insulation identification: White, black, red, green for 4 cores or fewer. Blue numbering for 5 cores or more. There is also a 3-core version in black, white, and green. ■ Complies with the Electrical Appliance and Material Safety Law. ■ A wide range of sizes and core counts in stock! ■ For 5 cores and above, cutting is available in 1-meter units! * "3SX" with braided shield is also in stock.

Proven track record of over 25 years since its release. This is the 600V VCT type from the "Sunlight" series, synonymous with "soft and oil-resistant cables." Please use it widely and generically as a movable wiring solution in power wiring for various machines and devices where oil resistance, flexibility, and weather resistance are required. 【Features】 ■ Sheath: Black, oil-resistant, weather-resistant, flame-retardant (equivalent to VW-1), flexible, non-migrating. ■ Insulation identification: White, black, red, green for 4 cores or fewer. Blue numbering for 5 cores or more. ■ Complies with the Electrical Appliance and Material Safety Law. ■ A wide range of sizes and core counts in stock! ■ For 5 cores and above, cutting is available in 1-meter increments! * "6SX" with braided shielding is also in stock.

"Dy-SOFT (1015)" is a wire that has excellent flexibility due to its fine wire structure and the use of highly flexible vinyl insulation. Since there is no separator, there is no need for separator removal work! It has excellent heat resistance, flame retardancy, and oil resistance, making it suitable for internal wiring of equipment. In particular, it has a heat resistance lifespan of 110°C for 40,000 hours (approximately 4.6 years). It can be used for domestic and export equipment. 【Specifications and Certifications】 ■ Electrical Appliance and Material Safety Law ■ UL1015 ■ CSA ■ CE 【Features】 ■ Excellent flexibility ■ Can bend with a small diameter ■ Excellent heat resistance, flame retardancy, and oil resistance ■ Multi-certification ■ Environmentally considerate design *For more details, please refer to the PDF document or feel free to contact us.

The "600V EM-Dy-SOFT Series" is a type of wire that has a heat resistance lifespan of 110°C for 62,000 hours (approximately 7 years). The insulation material is non-halogen, phosphorus-free, and compliant with RoHS 10, making it environmentally friendly. It can be used as an eco-friendly wire. The insulator conforms to the fire-resistant cross-linked polyethylene mixture specified by the Electrical Appliance and Material Safety Law and has flame retardancy equivalent to that of polyvinyl chloride. 【Features】 ■ Excellent flexibility ■ Capable of small diameter bending ■ Outstanding heat resistance ■ Compliant with fire-resistant cross-linked polyethylene mixture ■ Achieves low-temperature flexibility *For more details, please refer to the PDF document or feel free to contact us.

"Karumage" is an eco-cable made from 0.45mm bare wire, making it very easy to handle. It is a 600V flame-retardant and flexible cross-linked polyethylene cable. We offer a low-cost version without plating in our lineup. We have stock available in single, duplex, and triplex configurations. With its sheath, it can be used for various outdoor applications, and the color band makes it easy to identify the wire core at a glance. 【Features】 ■ Easy to install ■ Affordable ■ Easy to choose ■ Suitable for installation in narrow spaces ■ Follows seismic vibrations *For more details, please refer to the PDF document or feel free to contact us.

"Karumage Nanya Nen" is a flame-retardant polyethylene sheathed cable made of 600V flexible flame-retardant cross-linked polyethylene. It features a non-halogen eco-friendly specification. It boasts excellent workability, and the conductor is 0.45mm. In addition to improving workability for narrow wiring, it can reduce the amount of cable used. 【Features】 ■ Excellent workability (4D) ■ High flame retardancy (compliant with IEEE 383) ■ Suitable for outdoor installation (heat resistance 90°C, cold resistance -50°C) ■ Line for preventing miswiring ■ Conductor is 0.45mm ■ Available with or without tin plating for immediate delivery *For more details, please refer to the PDF document or feel free to contact us.

"CIVUS" is a thin-walled low-voltage automotive wire that reduces the diameter of the conductor through a compressed conductor and makes the insulation thinner than AVSS. It is lighter and has a smaller diameter compared to AVSS. The operating temperature range complies with ISO 6722 Class B (-40°C to 100°C). We also offer "CIVUS 0.35mm2 2-core," which has a protrusion on one side of the code for polarity identification. 【Features】 ■ Conductor sizes: 0.13mm2 to 1.25mm2 ■ 0.13mm2 uses tin alloy wire (SN-C) ■ Operating temperature range complies with ISO 6722 Class B (-40°C to 100°C) ■ Among the lightest class of automotive wires ■ Flexible and easy to work with *For more details, please refer to the PDF document or feel free to contact us.

The "AL-EM-WCCT" is a high-strength aluminum conductor welding cable that can reduce the burden of cable transportation work at welding sites. The maximum allowable temperature for the conductor is 90°C. It is used for wiring on the secondary side of arc welding machines (for conductors). Additionally, due to its lightweight, the sheath does not wear down even when dragged, resulting in longer-lasting insulation. 【Features】 ■ More than 50% weight reduction compared to conventional products (WCT) ■ Reduces the burden of cable transportation work at welding sites ■ Lightweight, so the sheath does not wear down even when dragged, resulting in longer-lasting insulation ■ Maximum allowable temperature for the conductor: 90°C

Fluororesin is an excellent insulating material with physical properties such as heat resistance, cold resistance, water resistance, chemical resistance, and high lubricity, in addition to various electrical characteristics. ■ ETFE (-100℃ to 150℃) ■ FEP (-253℃ to 200℃) ■ PFA (-195℃ to 260℃) ■ PTFE (-253℃ to 260℃) Please use it for the outlet lines of devices in harsh environments, such as around blast furnaces or where acidic substances and toner may adhere. Selection should be made from ETFE to PTFE mainly based on the required heat resistance temperature. - For temperatures below 180℃, more affordable silicone insulated wires are also available. - If ultra-high temperature resistance beyond fluororesin is required, nickel conductor silicone glass braided insulated wires are also available. 【Specifications】 ■ Rated voltage: 600V or less ■ RoHS compliant ■ Electrical Appliance and Material Safety Law (ETFE and FEP from 0.75SQ to 8SQ) *For more details, please refer to the PDF document or feel free to contact us.

We handle the flexible seismic-resistant compensation lead wire "KX Toughra/KX-1 Toughra." It excels in heat resistance, cold resistance, flame resistance, and chemical resistance, making it suitable for a wide range of applications. Its excellent flexibility makes it recommended for wiring in movable parts such as injection molding machines and robots. We also offer "VX Sofra/KCB Sofra," which features special polyethylene insulation and a flexible vinyl outer sheath, as well as "VX Tough EV3/KCB Tough EV3," which has special polyethylene insulation and a flame-retardant special elastomer outer sheath. 【Features of KX Toughra/KX-1 Toughra】 ■ Fluororesin insulation / flexible fluororesin outer sheath ■ Round shape ■ Flexible seismic-resistant type ■ Excellent flexibility ■ Excellent heat resistance, cold resistance, flame resistance, and chemical resistance, making it suitable for a wide range of applications *For more details, please refer to the PDF materials or feel free to contact us.

【Features】 ■Complies with RoHS Directive, addressing 10 restricted substances ■Rated voltage: 300V (0.3SQ and 0.5SQ are not subject to PSE; please use below 100V) ■Rated temperature: 60℃ ■Standards ・0.3 to 0.5mm², 3.5mm² compliant with JIS C 3306 ・0.75 to 2mm² compliant with JIS C 3306 ■Sheath color: Gray ■Conductor identification: Easily recognizable color coding *Almost full-size stock available.

【Features】 ■Sheath color: Gray ■Conductor color: Color identification ■3 cores: Black, White, Y/G types available in 6 sizes from 0.75 to 8 SQ ■Number of conductors: From 2 to 30 cores depending on size ■Size: From 0.75 to 100 SQ - If soft, oil-resistant, and weather-resistant features are required, please select "Sunlight 6DX." https://premium.ipros.jp/koshow/product/detail/2000637278/?hub=163&categoryId=58927 - For abrasion conditions, please select "2PNCT." - For low-temperature conditions, please select "2CT." *For more details, please refer to the PDF document or feel free to contact us.

The sheath is gray. It is suitable for wiring of communication equipment for low power circuits and low current circuits (below 60V). In addition, we also offer a flame-retardant polyethylene cord "EM-MEES" that uses non-toxic and environmentally friendly insulation materials that do not contain halogens or lead. 【Features】 ■ Sheath: Gray ■ The shield for single-core (1 core) is spiral. ■ The shield for two cores or more is braided. ■ Standards and classifications (JCS) ・4271: Compliant with vinyl cord for microphones (Applicable: 1 to 4 cores × 0.3 to 2 mm²) 【Caution】 * MVVS is for low power circuits below 60V. If more is required, please select "Sunlight 3SX (below 100-300V) black sheath," etc.

The "1HEM-SH-C" is a one-hour low-pressure fire-resistant cable suitable for extending the operation time of firefighting equipment and evacuation guidance time during a fire. It achieves "double" the current-carrying time compared to conventional products. The available current-carrying time during a fire increases from 30 minutes to 60 minutes. It is expected to be applied to firefighting equipment wiring, including emergency lights and evacuation guidance lights, in buildings where evacuation guidance may take more than 30 minutes during a fire, such as high-rise buildings, long-distance tunnels, shopping centers, and elderly care facilities. 【Features】 ■ Achieves "double" the current-carrying time compared to conventional products ■ Equivalent outer diameter/weight/handling to conventional products ■ Complies with current announcements/standards ■ Can be installed in the same environments as conventional products *For more details, please refer to the PDF document or feel free to contact us.

"FF Toughra" is a multi-core cable designed for resistance to bending and vibration, with excellent heat resistance, oil resistance, chemical resistance, and spatter resistance, capable of continuous use at temperatures up to 200°C. The combination of fine wire conductors and FEP/FRWR achieves resistance to bending and vibration. It can be used in areas where resistance to vibration and bending is not required, and it also demonstrates excellent cable characteristics under temperature conditions that are insufficient for silicone rubber multi-core cables. 【Features】 ■ Maximum operating temperature: 200°C ■ Rated voltage: 600V or less ■ Conductor: Tin-plated soft copper wire (TA: fine wire configuration) ■ Insulation material: Fluororesin (FEP) ■ Outer sheath material: Flexible fluororesin (FRW) *For more details, please refer to the PDF document or feel free to contact us.

This catalog introduces the "Fluororubber Heat-Resistant Wires" manufactured by Fukuden Co., Ltd., which we handle. It features "FF Toughra-II (FK)," which is soft and easy to handle, as well as "5C-FK 19/0.16 SA," suitable for surveillance cameras and monitor cables. In addition to heat resistance, flexibility, flame retardancy, and splash resistance, these wires are also flexible and have excellent chemical resistance, making them suitable for a wide range of applications. [Featured Products] ■ FF Toughra-II (FK) ■ FF Toughra-BT-II (FK) ■ FF Toughra ■ 5C-FK 19/0.16 SA ■ 5C-NF Toughra 19/0.16 SA ■ KX Toughra-BT / RX Toughra-BT 1P×1.25SQ (40/0.2) *For more details, please refer to the PDF document or feel free to contact us.

This is the "UL Certified Compensation Lead" that has obtained the Listing Service mark. Please select it as a compensation lead for various devices aimed at North America. It uses fluoropolymer (FEP) as the insulating material, which has excellent properties such as heat resistance, cold resistance, chemical resistance, and moisture and water resistance. The product is equipped with a tinned copper wire braided shield. 【Features】 - Product with Listing Service mark - Uses fluoropolymer (FEP) as the insulating material - Equipped with a tinned copper wire braided shield - 1P×20AWG and 17AWG are available in stock sizes. One roll = 153m. - Custom orders, such as without shielding, are also possible. *For more details, please feel free to contact us.

The "600V LKGB" is a heat-resistant electric wire that has silicone rubber coated over tinned soft copper wire, with a double layer of glass braid applied on top. It is suitable for generators, motors, electric furnaces, and various electrical equipment in high-temperature environments, such as lead-out wires. With excellent heat resistance, the maximum operating temperature is 180°C, and the glass braid enhances the mechanical strength over the silicone rubber insulated wire. 【Features】 - Maximum operating temperature: 180°C - Rated voltage: 600V or less - Silicone rubber coated over tinned soft copper wire, with a double layer of glass braid applied on top - Glass braid enhances mechanical strength over silicone rubber insulated wire *For more details, please refer to the PDF document or feel free to contact us.

The "SRCT" is a silicone rubber multi-core cable for use in equipment, with a maximum voltage of 600V, made by twisting silicone rubber wires together and applying a silicone rubber outer sheath. It is a heat-resistant wire with excellent heat resistance and flexibility, with a maximum operating temperature of 180°C. It is suitable for wiring in various electrical equipment such as generators, motors, electric furnaces, and other devices in high-temperature environments. The standard stock item "SRCT-2" uses reinforced silicone rubber for the outer sheath, providing excellent mechanical strength. 【Features】 ■ Maximum operating temperature: 180°C ■ Rated voltage: 600V or less ■ Made by twisting silicone rubber wires together and applying a silicone rubber outer sheath ■ Excellent heat resistance and flexibility *For more details, please refer to the PDF document or feel free to contact us.

Our company is a comprehensive electronics trading firm that handles over 100,000 types of wires, cables, and electronic devices. We have seven logistics centers, three processing plants, and 13 sales offices in Japan, and we handle products from various manufacturers. Additionally, we can accommodate requests such as cable processing. We provide various FA and robot cables that meet needs such as seismic resistance, oil resistance, and compliance with foreign standards for specific destinations. Furthermore, if you are considering alternatives to shorten delivery times or improve designs, we will select suitable products with our high proposal capabilities to address your challenges and requests! 【We solve the following issues!】 ■ Selecting wires based on outer diameter, bending radius, seismic resistance, heat resistance, allowable current, chemical resistance, and various standards is just a hassle. ■ We want to minimize maintenance related to wires, such as equipment failures due to disconnections. ■ We cannot determine which existing alternatives apply. ■ We are dissatisfied with delivery times and prices. ■ The cables we are currently using have become unavailable. * You can view a simple summary of the features of FA cables and robot cables, as well as our product lineup, by downloading the PDF.

High Voltage Equipment Internal Wiring EP Rubber Insulated Wire "KIP" This is an insulated wire used for high voltage wiring inside cubicles (QB). Sumitomo's KIP has the characteristics of EM (Eco Material) wire! The handling and workability are the same as general KIP, so you can confidently replace it with existing manufacturer products. However, please note that differences in subjective sensations such as texture and hardness due to different manufacturers are not covered by this. We appreciate your understanding. Characteristics ● Application High voltage wiring inside 6.6kV cubicles ● Features As an environmentally friendly EM (Eco Material) wire, it is halogen-free, low smoke, flame retardant (passes JIS C 3005 inclined flame retardant), and compliant with RoHS. ● Applicable Standards JIS C3316

The "Slim Earth CV" from Juden HST Cable Co., Ltd. is a CV cable with one of its cores made of a thin green core (including 3C products). By keeping the green core at a sufficient performance size as the ground wire, it achieves a slimmer outer diameter and overall lightweight design. Installation work and transportation are also easy! Compared to conventional products, it has reduced the finished outer diameter by approximately 10% and the weight by up to about 21%. A green line is marked on the sheath at paired positions, making identification easier. Additionally, since the green core is pre-equipped, it prevents miswiring due to color coding. Feel free to contact us!