光昭 Product Lineup

"SUPER-GLAND" is a cable gland that demonstrates overwhelming performance in marine equipment and can be used underwater. It offers higher performance, better workability, and lower cost compared to traditional through fittings. It is also available in corrosion-resistant stainless steel SUS316L. Boasting complete waterproofing with an IP68 rating, it allows for the consolidation of part numbers through a wide range. 【Features】 ■ Higher performance, better workability, and lower cost than traditional through fittings ■ Consolidation of part numbers through a wide range ■ Excellent weather resistance ■ Available in corrosion-resistant stainless steel SUS316L ■ Complete waterproofing with an IP68 rating *For more details, please refer to the PDF document or feel free to contact us.

The "SUS304/316L cable gland" is resistant to corrosion and durable, allowing for long-term use once replaced. With no plating or coating, it prevents foreign matter contamination, making it suitable for delicate products. It is strong against rust and corrosion, and performs well in environments such as food equipment, medical, chemical devices, and nuclear applications. Maintenance and replacement frequency are reduced, leading to cost savings in operations. 【Features】 ■ High durability stainless steel ■ Prevention of foreign matter contamination ■ Excellent resistance and rigidity ■ Suitable for salt damage prevention ■ Achieves cost reduction *For more details, please refer to the PDF document or feel free to contact us.

The "Waterproof Super Grand for Connector Cables" allows for lateral insertion of cables through a slitted thick rubber seal. It is suitable for pulling in connector cables. We offer seals with an inner diameter of φ6mm to match the outer shape of indoor connectors, and seals with an inner diameter of φ10mm to match the outer diameter for outdoor use. 【Features】 ■ Seals with an inner diameter of φ6mm to match the outer shape of indoor connectors, and seals with an inner diameter of φ10mm to match the outer diameter for outdoor use. ■ Since the connector cannot pass through the seal's inner diameter, slits are made in the seal to allow lateral insertion of the cable. ■ Slitting can also be done on-site using the seal cutter "GSC-042." *For more details, please refer to the PDF document or feel free to contact us.

The "Waterproof Protection Plug for Exhaust" prevents the intrusion of water and dust from the outside while maintaining breathability. Heat and humidity trapped inside the enclosure are naturally expelled due to pressure differences. It is effective for condensation prevention and for adjusting internal pressure and temperature. It equalizes pressure differences caused by temperature changes and prevents air intake through gaps in the enclosure and electrical wires. 【Features】 ■ Waterproof and dustproof ■ Natural exhaust ■ Natural intake ■ Anti-condensation and anti-fogging ■ High durability *For more details, please refer to the PDF document or feel free to contact us.

The "FGB Series (Standard Model)" boasts an IP68/IP69 rating and is a cable gland that can be used underwater. It offers excellent operability with easy tightening by hand and a wide range of applicable diameters. It meets international standards such as VDE certification, CE marking, and certification from the Nippon Kaiji Kyokai (ClassNK). We provide a variety of shapes, materials/specifications, and screw sizes, allowing us to offer the appropriate cable gland for various situations without waste. 【Features】 ■ Compatible with various devices ■ Excellent operability with easy hand tightening and a wide range of applicable diameters ■ Outstanding weather resistance and durability for safe outdoor use ■ Waterproof performance that accommodates from simple waterproofing to complete waterproofing, usable underwater ■ Meets international standards such as VDE certification, CE marking, and certification from the Nippon Kaiji Kyokai (ClassNK) *For more details, please refer to the PDF document or feel free to contact us.

The "Plaflex Tough St (Silver)" is a PF pipe specifically designed for exposed piping that achieves a metallic look. A "waterproof joint" has been added for outdoor exposed piping. Additionally, "Universal Box," "DC Clip," and "Plachan" have been added, making this product even easier to use. 【Features】 ■ Achieves a metallic look in piping ■ Added "waterproof joint" for outdoor exposed piping ■ Added "Universal Box," "DC Clip," and "Plachan" *For more details, please refer to the PDF document or feel free to contact us.

"Plaflex Toughst" is an innovative pipe that combines the advantages of Plaflex PFS and steel electrical conduits. It is rust-resistant, strong against chemicals and oils, excels in corrosion resistance and durability, significantly reduces maintenance, and possesses self-extinguishing properties. It is suitable for both new construction and renovation work, as well as for exposed piping indoors and outdoors. 【Features】 ■ Rust-resistant, strong against chemicals and oils, and excels in corrosion resistance and durability ■ Excellent straightness, providing good aesthetics for exposed piping ■ Over 2.5 times the strength compared to PFS pipes ■ Produces less CO2 during manufacturing, reducing environmental impact *For more details, please feel free to contact us.

Currently used terminal processing material. Does it have a shrink back suppression effect? What is shrink back??? It is a phenomenon where the cable sheath contracts due to residual stress during cable manufacturing, exposure to sunlight, and heat cycles. When the shrink back phenomenon occurs, there is a risk of water ingress into the cable, the copper tape may break, leading to ground fault accidents. In recent years, relevant government agencies, local governments, and cable manufacturers have been raising awareness about measures against shrink back in high-voltage cables. Please consider adopting 3M's shrink back suppression solutions to prevent high-voltage cable accidents before they occur. It is especially recommended to implement measures for EM cables and fire-resistant cables.

Dissimilar metal contact corrosion caused by the potential difference of metals. Aluminum cables are lightweight, flexible, and have excellent installation workability! But what about the connectors...???? Do you have such concerns? We recommend the low-voltage aluminum cable straight connection heat shrink tube kit. The share bolt connector uses metals with intermediate potentials for copper and aluminum, and it features: ■ No need for compression or crimping tools. ■ Easy installation with simple tightening of screws. ■ Wide tolerance for conductor sizes covered by a single model number. Furthermore, the sheath restoration uses a heat shrink tube method, which allows for: ■ Easy work with short installation time. ■ Built-in grease for contact protection, providing anti-corrosion measures at the same time as installation. It will definitely be useful for straight connections between copper conductor CV and aluminum conductor CV.

"Shurutto" is a low-pressure cable connection heat shrink tube that achieves uniform construction quality. Easy to install and compact! It is ideal for narrow connections. Made from environmentally friendly materials, it is compatible with both standard cables and eco cables. It can be used for straight connections of low-pressure cables (below 600V) in buildings such as factories, commercial facilities, and office buildings. [Summary of Features] - Pulling the core causes it to shrink, reducing installation time - Easy to install and compact - Achieves uniform construction quality - Waterproof, suitable for temporary submersion environments - Made from environmentally friendly materials, usable with eco cables *For more details, please refer to the PDF document or feel free to contact us.