January Chemical Electric Vehicle Technology Seminar

Explanation of the facility audit method based on international standards (de facto standards) related to environment and safety and health implemented by Western companies to reduce overseas risks.

【Speaker】Dr. Kanji Tamamushi, President of Environment Japan Co., Ltd. 【Date and Time】January 14, 2011 (Friday) 13:00-16:30 【Lecture ends at 16:00. 16:00-16:30: Free time Q&A (reservation required, first-come, first-served)】 【Admission Fee】45,150 yen per person (including tax and text costs)

• Technical Seminar

Easy-to-understand explanation of material technology and printing technology for PE!

【Lecturer】 Professor Katsuaki Suganuma, Institute of Industrial Science, Osaka University 【Venue】 Kawasaki City International Exchange Center, Meeting Room 1 【Kanagawa, Kawasaki City】 10 minutes on foot from Tokyu Mot sumiyoshi Station 【Date and Time】 January 19, 2011 (Wednesday) 13:00-16:30 【Capacity】 30 people *Registration will close once full. Please apply early. 【Attendance Fee】 47,250 yen per person (including tax and text costs)

• Technical Seminar

★Market and Technology Trends★Decoration of elongated items, design and surface treatment ★Decorative film! Integration of molded product surfaces through transfer and adhesion★Plastic decorative coating

【Lecturers】 Part 1: Hirano Terumi, Ph.D., Representative of Hirano Engineering Office, President of the Decorative Technology Research Association Part 2: Masaki Shigemori, Senior Specialist, Pentel Co., Ltd. Central Research Institute Part 3: Kentaro Fujii, Head of Production Technology Division, Industrial Materials and Electronics Division, Nippon Photo Printing Co., Ltd. Part 4: Osamu Kirihara, Head of Innovation Division, Bayer MaterialScience Co., Ltd., Director of Innovation Center 【Venue】 Kawasaki City Educational and Cultural Center, Room 5 【Date and Time】 January 27, 2011 (Thursday) 10:00-16:15 【Capacity】 30 people *Registration will close once full. Please apply early. 【Participation Fee】 54,600 yen per person (including tax, lunch, and text costs)

• Technical Seminar

Recent trends in the market and technology of touch panel hard coat films! Improvements in scratch resistance, fingerprint resistance, weather resistance, dirt resistance, transparency, and concealment!

【Date and Time】January 26, 2011 (Wednesday) 10:30-15:30 【Capacity】30 people *Once full, registration will be closed. Please apply early. 【Lecture Fee】52,500 yen per person (including tax, lunch, and text costs)

• Technical Seminar

★ The most important thing in analog circuits is preprocessing! ★ Instead of focusing on how to use the system, we will impart all the know-how!!

Instead of focusing solely on how to use the system, we will impart all the know-how!!

• Technical Seminar

Applications to solar cells, lithium secondary batteries, organic EL, touch panels, and actuators!

【Lecturer】 Mr. Yasuo Kudo, Ph.D. in Engineering, Representative of Kudo Technical Consulting Office, Executive Director of Japan Advanced Science Co., Ltd. 【Venue】 Kawasaki City International Exchange Center, Conference Room 1 【Kanagawa, Kawasaki City】 10 minutes on foot from Tokyu Motosumiyoshi Station 【Date and Time】 January 21, 2011 (Friday) 13:00-18:30 (Individual consultations available until 19:00) 【Participation Fee】 47,250 yen per person (including tax and text costs)

• Technical Seminar

★A thorough explanation from the basics to global compliance measures for clinical trial drug GMP, taking into account audit experience! ★Introducing many actual concrete examples, including responses to QP!

【Instructor】QA Advisor, Doctor of Medicine, Akira Nomura 【Venue】Kawasaki City Educational and Cultural Center, Room 1 　【Kanagawa, Kawasaki】10 minutes on foot from JR and Keikyu "Kawasaki Station," 12 minutes from JR Shinagawa Station to Kawasaki Station 【Date and Time】January 26, 2011 (Wednesday) 13:00-16:30 【Capacity】30 people 【Attendance Fee】45,150 yen per person (including tax and text costs)

• Technical Seminar

What are the measures against the bleeding of additives, antioxidants, flame retardants, plasticizers, light stabilizers, and antistatic agents?

【Lecturer】 Dr. Toshikatsu Nishioka, Part-time Lecturer at Gunma University, Visiting Professor, Doctor of Engineering 【Venue】 Kawasaki City Industrial Promotion Hall, Room 2 【Kanagawa, Kawasaki Station】 7 minutes on foot from JR and Keikyu Kawasaki Station 【Date and Time】 January 20, 2011 (Thursday) 10:30-16:30 【Admission Fee】 47,250 yen per person (including tax and textbook costs)

• Technical Seminar

★A must-see for those who want to easily learn the basics and structural control of phenolic resins!! ★Detailed explanation of the applications of phenolic resins and phenolic derivatives!

【Speaker】Mr. Shigeki Inatomi, Technical Advisor at Asahi Organic Chemicals Industry Co., Ltd. (Former Asahi Organic Chemicals Fellow) 【Venue】Kawasaki City Industrial Promotion Hall, Conference Room 2 【Kanagawa, Kawasaki Station】7 minutes on foot from JR and Keikyu Kawasaki Station 【Date and Time】January 20, 2011 (Thursday) 13:00-16:30 【Capacity】30 people *Registration will close once full. Please apply early. 【Admission Fee】47,250 yen per person (including tax and text costs)

• Technical Seminar

★You can easily learn everything from the basics to various troubles in just one day! ★You can have individual consultations with the instructor during breaks or after the seminar!

【Instructor】Mr. Shunji Murano, President of 3DPowers, Inc. 【Venue】Kawasaki City Industrial Promotion Hall, Room 2 Training 【Kanagawa, Kawasaki Station】7 minutes on foot from JR and Keikyu Kawasaki Station 【Date and Time】January 31, 2011 (Monday) 10:00-16:00 【Individual consultation time until 16:45】 【Capacity】30 people *Registration will close once full. Please apply early. 【Participation Fee】48,300 yen per person (including tax, lunch, and text costs)

• Technical Seminar

★Explaining the characteristics of composite materials, constituent materials, structures, molding methods, quality assurance, and the actual practice of "monozukuri" in a Q&A format!

【Instructor】 Yoshitaka Someya, Representative of Shonan Material Technology 【Venue】 Kawasaki City Educational and Cultural Center, 4th Floor, Room 3 【Kanagawa, Kawasaki Station】 7-10 minutes on foot from JR Kawasaki Station 【Date and Time】 January 28, 2011 (Friday) 10:30 AM - 4:30 PM 【Capacity】 30 people *Registration will close once full. Please apply early. 【Attendance Fee】 48,300 yen per person (including tax, lunch, and text costs)

• Technical Seminar

★Lithium-ion batteries, superhard tool materials, phosphors, nickel... ★What are the key points of various separation and recovery methods for rare metals?

【Lecturer】 Junji Shibata, Professor, Faculty of Environmental Urban Engineering, Kansai University 【Venue】 Room 5, Kawasaki City Educational and Cultural Center 【Kanagawa, Kawasaki Station】 12 minutes on foot from JR and Keikyu Kawasaki Station 【Date and Time】 January 25, 2011 (Tuesday) 12:30-16:30 【Capacity】 30 people *Registration will close once full. Please apply early. 【Attendance Fee】 47,250 yen per person (including tax and text costs)

• Technical Seminar

★ I want to know more about hybrid UV curing that combines multiple light-curing reactions! ★ Is it possible for curing promotion to occur in areas where light does not reach?

【Lecturer】Kunihiro Ichimura, Specially Appointed Professor, Faculty of Science, Toho University 【Venue】Kawasaki City Industrial Promotion Hall, Conference Room 1 【Kanagawa, Kawasaki Station】7 minutes on foot from JR and Keikyu Kawasaki Station 【Date and Time】January 31, 2011 (Monday) 12:30-16:30 【Capacity】30 people *Registration will close once full. Please apply early. 【Attendance Fee】47,250 yen per person (including tax and textbook costs)

• Technical Seminar

An explanation of various patent investigation methods related to Chinese medicinal patents that cannot be heard elsewhere! ★ Specific cases including patent due diligence.

【Instructor】 Mr. Takuho Xie, Director of Xie International Patent Office, Patent Attorney, Doctor of Pharmacy 【Venue】 Kawasaki City International Exchange Center, Room 5 【Kanagawa, Kawasaki】 10-12 minutes walk from "Motosumiyoshi Station" on the Tokyu Toyoko Line and Tokyu Meguro Line 【Date and Time】 January 26, 2011 (Wednesday) 13:00-16:30 【Approximate: Lecture ends at 16:00. 16:00-16:30: Free time Q&A (reservation required, first-come, first-served)】 【Capacity】 30 people ※ Registration will close once full. Please apply early. 【Participation Fee】 45,150 yen per person (including tax and text costs)

• Technical Seminar

A must-attend course packed with essential knowledge about adhesives and bonding techniques that are currently in demand, covering everything from the basics to troubleshooting!

【Date and Time】January 27, 2011 (Thursday) 10:30-16:30 　【Lecture ends at 16:00. 16:00-16:30: Free time Q&A (reservation required, first-come, first-served)】 【Capacity】30 people *Once full, we will close applications. Please apply early. 【Participation Fee】48,300 yen per person (including tax, lunch, and text costs)

• Technical Seminar

★A clear explanation of the mechanism for joining films and sheets using heat! ★Even those who are not specialists in polymers can understand it!

【Date and Time】January 27, 2011 (Thursday) 13:00-16:30 【Capacity】30 people *Registration will close once full. Please apply early. 【Participation Fee】47,250 yen per person (including tax and text costs)

• Technical Seminar

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.