The product page for the high-temperature observation laser microscope system "VL3000DX-SVF18SP" is now available! Observe in-situ at a maximum temperature of 1800°C with high resolution! Please utilize it for research on the microstructural behavior of materials such as steel, non-ferrous metals, ceramics, and secondary batteries under high temperatures, as well as for material development.

High-resolution in-situ observation under environments up to 1800℃. For research and material development of ceramics, secondary batteries, etc.!

The representative heating observation IR imaging furnace from Mikyo Manufacturing has been equipped with a digital violet laser microscope. It enables clear microscopic observation in ultra-high temperature environments of up to 1800°C. Compared to conventional models, the resolution and brightness have improved by about two times*, allowing for observations with high magnification and high contrast. Please utilize it for research on the behavior of fine structures and material development under high temperatures in steel, non-ferrous metals, ceramics, secondary batteries, and more. *Compared to our conventional model "VL2000DX-SVF17SP" ◆ Key Points ◆ - High-resolution in-situ observation Obtaining high-resolution images under ultra-high temperatures - Realization of diverse observation conditions Rapid heating and rapid cooling up to 1800°C - Excellent operability and controllability High-speed image acquisition accurately linked to temperature By using the optional load mechanism module "SVF12FTC," observations can be conducted under stress loading (up to 5kN) at high temperatures. For more details, please contact us.

• Steel

Rapid heating at approximately 50°C/sec using focused light heating method, with the possibility of rapid cooling when the heating lamp is turned off. Compatible with various atmospheres.

The "IR Series" (IR Series) of focusing heating furnaces manufactured by Yokokura Seisakusho, used by various research institutions around the world, is an IR image furnace that utilizes near-infrared focusing heating. It features a clean environmental structure that allows for ultra-fast heating and cooling. The product lineup includes the "IR-HP (6 Parabolic Radiation)," which dramatically expands the temperature distribution area compared to conventional heating furnaces with rapid heating and cooling from six directions; the "IR-QP (4 Elliptical Shared Focusing)," which offers double the temperature distribution area and rapid heating compared to conventional heating furnaces with rapid heating and cooling from four directions; and the "IR-TP (2 Elliptical Shared)," which enables microscopic observation compared to conventional heating furnaces with rapid heating and cooling from two directions. 【Main Features】 - Clean, energy-efficient, high performance - Vacuum and gas replacement + observation - High-speed heating with low power (1500°C in 30 seconds with only 4kW) - Heater uses tungsten filament with a high heating temperature of 3400K - Watt density is 10 to 20 times higher than nichrome heaters - Real-time temperature control available - Compact size For more details, please contact us or refer to the catalog.

• Electric furnace

Contributed to research on changes in the internal structure of ceramics! Direct observation of changes in internal structure at high temperatures.

The "OCT-equipped heating observation imaging furnace," which allows for direct observation of internal structural changes at high temperatures, has contributed to the study of changes in the internal structure of ceramics. It is a compact device utilizing a focused heating method and equipped with OCT (Optical Coherence Tomography) for internal observation. ◆ Key Points ◆ - Internal structure observation at high temperatures In-situ observation up to 1800°C - Understanding weight and thermal changes Clarifying the relationship between internal changes and temperature/weight changes - Excellent operability and controllability Data acquisition combining weight changes with temperature OCT is a technology that uses infrared laser light to visualize the interior of materials. It can be applied to materials such as ceramics and resins that allow infrared light to pass through. For more details, please refer to the catalog or contact us.

• Testing Equipment and Devices

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

From July 15 (Tuesday) to July 20 (Sunday), 2025, the "42nd Daihatsu Japan Open 2025 Badminton Championships" was held at the Tokyo Metropolitan Gymnasium. We would like to report on the motion capture experience session conducted by Yonex Co., Ltd. at the venue. During the experience session, participants were asked to swing three different types of rackets from different generations, focusing on whether there were differences in their top speeds. The measurement was conducted using the same Raptor-12HS system utilized at the Yonex Performance Innovation Center (Blue Lab). This was a valuable opportunity to experience the research equipment that is not currently open to the public and to see what kind of measurements are being conducted! ---[Yonex Co., Ltd. Experience Session Report Here]--- https://info.nacinc.jp/report_yonex_badminton_motioncapture -------------------------------------------------------------------------

Hello, this is the public relations department of KAITAKU Co., Ltd. in Okayama City, Okayama Prefecture! Recently, our wooden lightweight hyper CLT sheet has been officially registered with the Ministry of Land, Infrastructure, Transport and Tourism (NETIS number: TH-250021-A). The decisive difference between hyper CLT sheets and conventional temporary materials lies in the "exit" after their durability period ends. The hyper CLT sheet (NETIS number: TH-250021-A) is not discarded after its role on site is finished; instead, it is reused as chip fuel for biomass power generation. • Made: It is made from **wood (thinned timber)**, resulting in low environmental impact. • Used: It significantly contributes to reducing CO2 on site. • Converted to energy: Once its durability period is over, it becomes chip fuel for biomass power generation, ensuring that no resources are wasted. In this way, a **"complete circular" system** is established that connects materials to energy. Additionally, these initiatives can serve as a strong appeal for creativity related to construction performance. Please try the hyper CLT sheet (NETIS number: TH-250021-A)!

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. Many implementation examples are also presented, so please take a look at the case study page.

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.