Publication of a case study collection on adhesive processing, waterproofing, and assembly processing of rubber products.

Numerous examples of "polyurethane foam processed products" that can perform precise cutting and adhesive processing are featured!

This case study collection introduces examples of adhesive processing, waterproof processing, and assembly processing of rubber products. It includes numerous examples of "polyurethane foam processed products" and "extruded sponge processed products" that can achieve precise cutting and adhesive processing, as well as "liquid gasket coating processed products" that can be implemented with a liquid agent as narrow as 0.2mm. Please feel free to download and take a look. [Featured Examples] ■ Polyurethane Foam Processed Products ■ Extruded Sponge Processed Products ■ Liquid Gasket Coating Processed Products ■ Rubber Sponge Processed Products *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract

Cutting possible at a minimum of 0.3mm! An example of processing performed with half-cut treatment.

We would like to introduce examples of processing rubber gaskets and rubber sponge products. After applying double-sided tape to the rubber gasket and rubber sponge, we perform cutting processing using a half-cut method. We can cut to a minimum of 0.3mm. Please feel free to contact us when you need our services. 【Features】 ■ After applying double-sided tape to the rubber sponge, we perform cutting processing using a half-cut method. ■ We can cut to a minimum of 0.3mm. *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract

Both prototype and mass production available! A case where seven parts were cut using a cutting machine and then underwent adhesive processing.

We would like to introduce examples of processing polyurethane foam products. After cutting the polyurethane foam into seven parts using a cutting machine, we perform adhesive processing. We can achieve precise cutting and adhesive processing. We can accommodate both prototypes and mass production. Please feel free to contact us when needed. 【Features】 ■ After cutting the polyurethane foam into seven parts using a cutting machine, adhesive processing is performed. ■ Precise cutting and adhesive processing can be achieved. ■ We can accommodate both prototypes and mass production. *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract

Examples of processing such as cutting to length, hole drilling, adhesive processing, and waterproof coating treatment on extruded sponge!

We would like to introduce examples of processed extruded sponge products. We perform length cutting, hole drilling, adhesive processing, and waterproof coating treatment on extruded sponge. Precise cutting and adhesive processing can be achieved. We can accommodate both prototypes and mass production. Please feel free to contact us when needed. 【Features】 ■ Length cutting, hole drilling, adhesive processing, and waterproof coating treatment are performed on extruded sponge. ■ Precise cutting and adhesive processing can be done. ■ We can accommodate both prototypes and mass production. *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract

Precision application of liquid gasket implemented! Maximum application size 400mm square, with a minimum liquid width of 0.2mm possible!

We would like to introduce examples of processing liquid gasket coating products. We specialize in the precise application of liquid gaskets, primarily for metal and resin cases. Depending on the application, we have various achievements using methods such as FIPG and CIPG, with a maximum coating size of 400mm square and a minimum liquid width of 0.2mm. Please feel free to contact us if you have any inquiries. 【Processing Details】 ■ We perform precise application of liquid gaskets, primarily for metal and resin cases. ■ We have various achievements using methods such as FIPG and CIPG, depending on the application. ■ Maximum coating size is 400mm square. ■ Minimum liquid width is 0.2mm. *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.