Material evaluation using ultra-micro hardness testing for metals, polymers, plastics, etc.

It is also possible to analyze many material properties such as Young's modulus, plastic hardness, plastic deformation amount, elastic ratio, and creep! Variations in hardness and other properties can be expressed using standard deviation.

Our company can perform ultra-microhardness measurements on various materials such as metals, polymers, plastics, and ceramics. Additionally, since hardness can be quantified, the characteristics of the materials become clearer. The ultra-microhardness tester "Fischer scope H100" measures by gradually increasing the load up to the set value, allowing for the continuous profiling of hardness and indentation depth from the surface, as well as information on the effects on the material. By determining the hardness value from the penetration depth of the indenter into the material and the load/penetration depth curve after unloading, it is possible to analyze many physical properties beyond hardness, such as Young's modulus, plastic hardness, plastic deformation amount, elastic ratio, and creep. Please feel free to contact us if you are considering evaluating the characteristics of materials. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

Features: ● Equipped with NVIDIA Jetson Orin NX ● Supports JetPack 6.2 Super mode ● 8GB/16GB LPDDR5 onboard memory ● USB 3.2 Gen 2 x 4 ● RS232 x 1 ● 10-pin header DIO ● Expansion: M.2 2230 E-Key x 1, M.2 3052 B-Key x 1

Features: ● Equipped with Jetson AGX Orin 32GB/64GB ● Gigabit LAN ×1, 10Gigabit LAN ×1 ● USB 3.2 Gen 2 (Type-A) ×4 ● DB-9 connector ×1 (for DIO 8 channels) ● DB-9 connector ×2 (supports RS-232/422/485: Rx/Tx/RTS/CTS) ● Pre-installed with Jetpack 6.0.0

Features: ● NVIDIA Jetson Orin NX 8GB/16GB ● Fanless design ● 8GB/16GB onboard memory ● PoE/PSE GbE LAN x 8 * 4 ports of PoE share one MAC address and Giga bandwidth * Supports a total of 120W PoE with input of 24V or higher, 80W PoE with input of 12-24V, and 80W PoE with input of 12V or lower. ● Giga LAN x 2 ● Supports 9V-36V DC input and can also accommodate ACC ignition delay On/Off ● Jetpack 6.0.0 pre-installed

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without any thermal impact on the base material. Repairs can be conducted in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is required, please contact us.