Announcement of the publication of Aqua System "Product Catalog vol. 23" (2023-2024 edition)

For the transfer of low-viscosity oils such as kerosene, light oil, and biodiesel.

**EMH Series** EMH-20FC (For oil, kerosene, light diesel, biodiesel / Pump only) EMH-20SUS (For oil, kerosene, light diesel, biodiesel, solvents / Pump only) EMHH-20FC (For oil, kerosene, light diesel / Both ends with hose) EMHD-20FC (For oil, kerosene, light diesel / For drums) EMHD-20SUS (For oil, kerosene, light diesel, biodiesel, solvents / For drums) **Benefits** ● Continuous operation possible ● Can transfer kerosene and light diesel without selecting containers ● Ideal for transferring biodiesel oil ● Low vibration and low noise **Features** ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Equipped with relief valve (0.1MPa), vane pump ● Various customizations available for drum use and hose connections. *Note: SUS type cannot be used with water or solvents.*

• Other pumps

For transferring low-viscosity oils such as kerosene, light oil, and biodiesel! Electric handheld pump.

**EMH Series** EMH-20FC (for oil, kerosene, diesel, biodiesel / pump only) EMH-20SUS (for oil, kerosene, diesel, biodiesel, solvents / pump only) EMHH-20FC (for oil, kerosene, diesel / both ends with hose) **Advantages** ● Continuous operation possible ● Can transfer kerosene and diesel without selecting containers ● Ideal for transferring biodiesel oil ● Low vibration and low noise **Features** ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Equipped with a relief valve (0.1MPa), vane pump ● Various customizations available for drum cans and hose connections *Note: The SUS type cannot be used with water or solvents.* **Mechanism of EMH Pump** The center of the pump body is slightly offset from the center of the impeller, creating a structure where the movable vanes extend due to centrifugal force. It adopts a principle of operation that increases pressure by reducing volume with the vanes. Additionally, the EMH series uses Teflon and fluorine for the packing, allowing for the transfer of biodiesel.

• Other pumps

Radial piston vane pump, suitable for use in explosion-proof areas and easy to carry! For transferring liquids from tanks or drums such as kerosene and diesel.

"AMVH Series" AMH1-20FC (For oil, kerosene, diesel, biodiesel / Pump only) AMH1D-20FC (For oil, kerosene, diesel / For drums) AMH1H-20FC (For oil, kerosene, diesel / Hose at both ends) ◎ Explosion-proof design that does not use electricity ◎ Usable without sealing the drum ◎ Customizable "Benefits" ● Capable of transferring medium viscosity liquids (up to 2,000 cP) ● Air-driven for safety without electric leakage ● Can operate continuously, usable as a circulation pump "Features" ● Maximum lift height of 15m ● Radial piston motor type vane pump ● Available in types for drums and hose connections "Mechanism of Radial Piston Motor" A motor that operates by alternately compressing air into three pistons. With three pistons built-in, it is characterized by high discharge pressure. Capable of transferring high-viscosity liquids (up to 2,000 cP) to heights and distances within 15m.

• Other pumps

Air-operated diaphragm pump capable of transferring high-viscosity oils and flammable liquids to high places or over long distances for solvent/drum use.

《DF Series》*AS, SUS DF4D-20AS (for solvents / for drums) DF6D-20AS (for solvents / for drums) DF6D-20SUS (for solvents / for drums) ◎ Explosion-proof design that does not use electricity ◎ Compatible with high-viscosity liquids ◎ Can be used without sealing the drum ◎ Powerful discharge 《Benefits》 ● Efficiently transfers high-viscosity liquids ● Safely transfers flammable liquids ● Ideal for horizontal and high-lift transfer ● Can be used as a circulation pump due to continuous operation capability 《Features》 ● Designed specifically for JIS standard 200L closed drums (large plug G2) ● High lifting capacity ● Diaphragm pump (with pulsation)

• Other pumps

For oil, kerosene, light oil, and gasoline / both ends of the hose: High-viscosity oil and flammable liquids can also be transferred to high places or long distances.

◎Explosion-proof design that does not use electricity ◎Compatible with high-viscosity liquids ◎Can be used without sealing the drum ◎Powerful discharge 《Benefits》 ●Efficient transfer of high-viscosity liquids ●Safe transfer of flammable liquids ●Ideal for horizontal and high-lift transfer ●Can be used as a circulation pump due to continuous operation capability 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●High lifting capacity ●Diaphragm pump (with pulsation)

• Other pumps

High-viscosity oils and flammable liquids can be transported to high places or long distances for oil, kerosene, diesel, and gasoline/drum cans.

◎Explosion-proof design that does not use electricity ◎Compatible with high-viscosity liquids ◎Can be used without sealing the drum ◎Powerful discharge 《Benefits》 ●Efficient transfer of high-viscosity liquids ●Safe transfer of flammable liquids ●Ideal for horizontal and high-lift transfer ●Can be used as a circulation pump due to continuous operation capability 《Features》 ●Designed specifically for JIS standard 200L closed drums (large plug G2) ●High lifting capacity ●Diaphragm pump (with pulsation)

• Other pumps

The liquid contact materials have been upgraded to SUS, PTFE, and FFKM, allowing for a wider range of compatible liquids compared to our previous model (CHD-20A)! Suitable for solvent transfer in areas where open flames are prohibited.

**CHD1 Series** CHD1-20ASUS (for solvents) CHD1-20ASUS-V (for solvents / with ball valve) CHD1-20ASUS-N (for solvents / with gun nozzle) ● Oil-free air motor type ● Lightweight and compact body ● Inexpensive **Features** ● Safe and secure due to air drive ● Dedicated for JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● Discharge rate of 20L/min (with nozzle) ● Discharge only **Applications** Used not only in metal plating factories and semiconductor manufacturing but also in chemical plants, pharmaceutical warehouses, and other sites. Additionally, it is used in water treatment, pharmaceuticals, laboratories, schools, and hospitals. For areas with high volatility, high flammability, explosion-proof zones, and no open flames, please use the air-operated model (CHD1-20ASUS-N). **Suitable for use in the following areas!** ■ Lithium batteries (secondary batteries) ■ Dyeing, semiconductor, disinfectant manufacturing, automotive, and electrical appliance factories ■ Surface treatment in metal plating factories ■ New energy sector **Compatible with the following liquids!** ■ Alcohol ■ Thinner ■ Acetone ■ Methanol ■ MEK, etc.

• Other pumps

Solvent use: High flow rate, high lift pressure-resistant explosion-proof motor pump! For the transfer and dispensing of flammable liquids (electric explosion-proof motor pump).

**EMM Series** EMM-25PP (for solvents) EMM-25SUS (for solvents) **Benefits** ● High discharge volume and high lift pressure-resistant explosion-proof motor pump ● Liquid transfer and small packaging in fire hazard areas ● High performance with 40L per minute and a lift height of 8m ● Suitable for transferring and small packaging of gasoline (EMM-25SUS) **Features** ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● Equipped with a pressure-resistant explosion-proof motor (d2G3) ● For low viscosity liquids (below 50cp) *Note: The outlet is not explosion-proof.*

• Other pumps

AdBlue for purifying diesel exhaust gases: When you want to quickly portion out AdBlue from a resin drum.

"HRB Series" HRB-20P (for AdBlue) ◎ PSE (Electrical Appliance and Material Safety Law) compliant product ◎ Acquired AdBlue license in 2011 Aqua System is the only pump equipment manufacturer in Japan certified by the German Association of the Automotive Industry. As the market gradually expands from trucks and buses to construction and agricultural machinery, and as needs change, we are currently developing and importing AdBlue products suitable for Japan in response to customer feedback. ◎ Hand-operated pump that requires no power source 《Advantages》 ● Lightweight and compact, easy to use due to hand-operated design ● Optional attachment for a type power hose available ● Cost-effective and reduces expenses 《Features》 ● Designed specifically for JIS standard 200L closed drums (large cap G2) * Optional adapter specifications available in Kodama resin and Sanko manufacturing ● Hand rotary type ● Discharge pipe made of durable stainless steel

• Other pumps

Convenient for supplying AdBlue in small quantities to cargo vehicles, construction machinery, agricultural machinery, and large vehicles.

"AdBOX Series" AdBOX (for AdBlue) ◎ PSE (Electrical Appliance and Material Safety Law) compliant product ◎ Acquired AdBlue license in 2011 Aqua System is the only pump equipment manufacturer in Japan certified by the German Association of the Automotive Industry. As the market gradually expands from trucks and buses to construction and agricultural machinery, and needs change, we are currently developing and importing AdBlue products suitable for Japan to respond to customer feedback. "Benefits" ● Easy to carry with a carry-style design ● Can be powered by heavy machinery or vehicle batteries ● Compact yet delivers a flow rate of 25L per minute ● Ideal for refueling large vehicles such as trucks, construction machinery, and agricultural machinery "Features" ● AdBlue pump set that fits in one box ● DC-24V

• Other pumps

For transporting fuel and water in places without power or during emergencies. Despite being a manual pump, it has excellent suction capability.

"HDO Series" - HDO-20ALA (for oil, kerosene, diesel, and water / hose nipple specification) - HDO-20(25)ALB (for oil, kerosene, diesel, and water / screw connection specification) - HDO-20ALOZ (for oil, kerosene, diesel, and water / coupler connection specification) - HDO-32(40)ALB (for oil, kerosene, diesel, and water / screw connection specification) - [Discontinued] HDO-20(30P) (for water and seawater / hose nipple specification) - ST-HDOS-32(40)ALB (for oil, kerosene, diesel, and water / screw connection specification) - KT-HDOS-32(40)ALB (for oil, kerosene, diesel, and water / screw connection specification) - HDO-50 (for oil, kerosene, diesel, and water / screw connection specification) ◎ For emergency water supply pump ◎ Easy operation "Benefits" ● Performance of 8m suction (no priming needed) and 8m discharge (HDO-32/40ALB has 5m suction and 7m discharge, HDO-50AL has 4m suction and 7m discharge) ● Usable in locations without power supply ● Can handle high-viscosity liquids and waste oil "Features" ● Made of aluminum ● Handle can be replaced every 90° ● Easy to disassemble and assemble

• Other pumps

A manual hand diaphragm pump that is ideal for transporting fuel and water in places without power or during emergencies! Despite being a manual pump, it has excellent suction capability.

**HDO Series** HDO-20ALA (For oil, kerosene, diesel, and water / Hose nipple specification) HDO-20(25)ALB (For oil, kerosene, diesel, and water / Screw connection specification) HDO-20ALOZ (For oil, kerosene, diesel, and water / Coupler connection specification) ◎ For emergency water supply pump ◎ Easy to operate **Benefits** ● Suction performance of 8m (no priming required) and discharge of 8m ● Usable in locations without power supply ● Can handle high-viscosity liquids and waste oil **Features** ● Made of aluminum ● Handle can be replaced every 90° ● Easy to disassemble and assemble **Applications** ● Water supply and drainage pump for disaster situations ● Emergency waste liquid pump for facilities such as factories ● Pump for construction and civil engineering work ● Fuel supply pump for various vehicles and machinery ● Maintenance for machinery and various facilities ● Bilge pump and emergency standby equipment for ships and boats ● Rainwater utilization system for households ● Waste cooking oil collection

• Other pumps

Introducing cleaners that can filter cutting fluid without stopping the machine, and cleaners that can be used for cleaning during setup time!

Since our establishment in 1957, our company has been responding to the diverse needs of various customers involved in liquid management in factories, ranging from diesel and oil to chemicals and food, with the motto "Small but spicy like sansho pepper." This time, we would like to introduce the "Air-Powered Tank Cleaning and Filtration Cleaner," which reduces the burden of daily cleaning of cutting fluid tanks! ■ Do you have any of these concerns? - Inefficient due to machine stoppage during cleaning - Difficulties in collecting and disposing of cutting fluid - Time and cost involved in tank cleaning - Frequent breakdowns of electric vacuum cleaners * We have a wide range of products available to suit your needs. * For more details, please request our materials or view the PDF data available for download! ~ Regarding the demo machine rental service mentioned ~ * As of August 1, 2019, the demo machine rental service has been discontinued in principle. We apologize for the inconvenience and appreciate your understanding.

• Other pumps

A vacuum cleaner for collecting oil and metal shavings in a pail can. It is convenient for on-site cleaning as it is suitable for both dry and wet use.

"Just place it and it's ready to use. Anyone can use it right away. Just plug it in and it's ready to use." 《APPQO Series》 APPQO550S (for oil / wet and dry use) APPQO550 (for oil / wet and dry use) APPQO550-SET (for oil / wet and dry use / vacuum cleaner set) ◎ Simple structure with no breakdowns ◎ Easy operation ◎ Convenient options 《Benefits》 ● Can be used just by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a suction pump and a vacuum cleaner for wet and dry applications ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● For collection only (general oil, oil, chips, etc.) ● Compatible with JIS standard 20L open pail (for top outer diameter 300mm±1, recommended plate thickness 0.4mm or more) ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM

• Other pumps

A new filter ideal for chip recovery has arrived! A must-see for customers using NC lathes and machining centers!

Cleaning time for our conventional stainless steel filters When dirt is severe, it takes about 30 minutes or more, now reduced to just a few minutes! *The time is an approximate guideline and may vary depending on the cleaning method, environment, and usage conditions. ◎ Filter cleaning has become easier ◎ It now includes a dehydration function ◎ Compatible with both stainless steel and non-woven fabric types *Not included with the main unit and sold separately. 【Compatible Products for Filters】 ■ Air-operated circulation filtration cleaner 'J-F Series' 　＜J-FS＞ Dedicated for chips, SUS filter type 　＜J-FF＞ Dedicated for polishing, non-woven fabric filter type ■ Air-operated tank cleaning filtration cleaner 'APDQO Series' 　＜APDQO-FS＞ Dedicated for chips, SUS filter type 　＜APDQO-FF＞ Dedicated for polishing, non-woven fabric filter type

• Other pumps

Solvent / Wet and Dry Use: A vacuum cleaner that can collect solvents and metal shavings! Convenient for on-site cleaning due to its wet and dry capabilities.

◎ Simple structure, trouble-free ◎ Easy to operate ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a suction pump for wet and dry applications and a vacuum cleaner ● Less likely to break compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● For collection only (general oil, oil, metal shavings, etc.) ● Compatible with JIS standard 20L open pail (recommended outer diameter of top 300mm±1, plate thickness of 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 3 horsepower (2.25kw) or more 《Applications》 Cleaning around equipment and vehicles in automotive maintenance shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting and cutting oil in metal processing Cleaning in shipyards and bilge areas of ships Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter

• Other pumps

[For kerosene and light oil / Wet and dry use] A vacuum cleaner that can collect kerosene and light oil! Convenient for site cleaning due to its wet and dry capabilities.

◎ Simple structure, no breakdowns ◎ Easy to operate ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a wet and dry vacuum and an intake pump ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● For collection only (general oil, oil, metal shavings, etc.) ● Compatible with JIS standard 20L open pail (for top outer diameter 300mm±1, recommended plate thickness of 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 3 horsepower (2.25kw) or more 《Applications》 Cleaning around equipment and vehicles in automotive maintenance shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas Cleaning in warehouses and aisles Recovery of sludge and wastewater in septic tanks and pits Collection of welding spatter

• Other pumps

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

◎ Simple structure, no breakdowns ◎ Easy to operate ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available drum ● Continuous operation possible ● Usable as both a wet/dry vacuum and an intake pump ● More durable compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no fire risk 《Features》 ● For collection only (general oil, oil, metal shavings, etc.) ● Compatible with JIS standard 20L open drums (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 3 horsepower (2.25kw) or more 《Applications》 Cleaning around equipment and vehicles in automotive maintenance shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing plants Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas of ships Cleaning in warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter

• Other pumps

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

◎ Simple structure, no breakdowns ◎ Easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a wet and dry vacuum and an intake pump ● Less prone to breaking compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● For collection only (general oil, oil, metal shavings, etc.) ● Compatible with JIS standard 20L open pail (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ● Usable with air compressors of 3 horsepower (2.25kw) or more 《Applications》 Cleaning around equipment and vehicles in automotive repair shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter

• Other pumps

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

"Just place it and it's ready to use. Anyone can use it immediately. Just plug it in and it's ready to go." ◎ Simple structure with no breakdowns ◎ Easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a wet and dry vacuum and an inhalation pump ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● For collection only (general oil, oil, cutting chips, etc.) ● Compatible with JIS standard 20L open pails (recommended for top outer diameter 300mm±1, plate thickness 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM 《Applications》 Cleaning around equipment in automotive maintenance shops and vehicles Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting and cutting oil in metal processing Cleaning in shipyards and bilge areas Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• Other pumps

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

"Just place it and it's ready to use. Anyone can use it right away. Just plug it in and it's ready to go." ◎ Simple structure, no breakdowns ◎ Easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a wet and dry vacuum and an intake pump ● Less prone to breaking compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● For collection only (general oil, oil, chips, etc.) ● Compatible with JIS standard 20L open pail (for top outer diameter 300mm±1, recommended plate thickness of 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive repair shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• Other pumps

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

"Just place it and it's ready to use. Anyone can use it immediately. Just plug it in and it's ready to go." ◎ Simple structure with no breakdowns ◎ Easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a wet and dry vacuum and an inhalation pump ● More durable compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● For collection only (general oil, oils, cutting chips, etc.) ● Compatible with JIS standard 20L open pails (for top outer diameter 300mm±1, recommended plate thickness of 0.4mm or more) ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive maintenance shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas of ships Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• Other pumps

Oil use / wet and dry use! Vacuum cleaner with silencer! A pail vacuum cleaner that can collect oil and metal shavings! Convenient for site cleaning due to its wet and dry capabilities.

◎ Simple structure, no worries about breakdowns ◎ Equipped with new features for greater convenience and easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a wet and dry vacuum pump ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● Dedicated for collection (general oil, oil, metal shavings, etc.) ● Compatible with JIS standard 20L open pails (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive repair shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing plants Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• Other pumps

Collects everything from small stones to paper scraps. An eco-friendly, battery-free push cleaner.

**AJL Series** AJL360 ◎ No power source required It can be used simply by pushing it along. It is an ideal cleaner for beautifying not only inside factories but also around factories and on roads. It is a simple manual sweeper that can collect sand, small stones, hair, breadcrumbs, and paper waste. ◎ Standard equipped with two brushes The brushes are equipped on both sides, allowing it to pick up fine debris in corners. The brushes can be easily replaced. The rotating action helps to expand the area for collecting waste. **Benefits** ● Manual operation means no power needed ● No power cord, making it usable on roads and in parks ● Just push and walk, easy operation for women and the elderly ● Comes with a collection bucket, allowing disposal without dirtying hands ● Equipped with roller brushes for collecting fine debris **Features** ● Collects waste simply by pushing ● No power source required ● Standard equipped with two brushes ● Easily accessible dust box for collection ● Adjustable handle height ● No backflow of waste with side brushes ● Can be stored upright, saving storage space

• Hand cleaner

Cutting fluids for machine tools can be reused! Tank cleaning time is significantly reduced!

**APDQO Series** APDQO-FF100 (Non-woven Fabric Filter) APDQO-FS100 (Stainless Steel Filter) APDQO-FB100 (Bag Filter) ◎ Does not use electricity ◎ Automatically stops when full ◎ Equipped with a safety valve as standard **Benefits** ● Enables reuse of cutting fluid ● Improves tool life ● Safe due to air drive with no electric leakage ● Cleaning time as short as 5 minutes **Features** ● Designed specifically for JIS standard 200L open drums ● Capable of separating cutting fluid and chips ● Safety valve and float included as standard **Applications** The air-operated tank cleaning filtration cleaner APDQO-F series is capable of cleaning tanks of machine tools as well as filtering and separating 'liquids' and 'solids'. Therefore, in addition to filtering chips and sludge from machine tools, it can be used for the following purposes: ● Cleaning of machine tool tanks (removal of chips and sludge and reuse of cutting fluid) ● Separation and sorting of food waste in wastewater at food processing plants (restaurants) ● Separation of water and sludge from mountains and rivers ● Separation and sorting of waste and sewage

• Filtration Equipment

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

◎Simple structure, no worries about breakdowns ◎Equipped with new features for greater convenience and easy operation ◎Convenient options 《Benefits》 ●Can be used simply by placing it on a commercially available pail ●Continuous operation possible ●Can be used as both a wet and dry vacuum pump ●Less prone to breakage compared to electric vacuum cleaners ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●For collection only (general oil, oils, metal shavings, etc.) ●Compatible with JIS standard 20L open pails (for top outer diameter 300mm±1, recommended plate thickness of 0.4mm or more) ●Automatic stop when liquid is full ●Can be used with air compressors of 5 horsepower (3.75kw) or more ●Includes air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive maintenance shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas Cleaning in warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• Other pumps

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

◎ Simple structure, no risk of failure ◎ Equipped with new features for greater convenience and easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available drum ● Continuous operation possible ● Usable as both a wet and dry vacuum pump ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-prone areas, no risk of ignition 《Features》 ● Designed for collection only (general oil, oils, metal shavings, etc.) ● Compatible with JIS standard 20L open drums (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive maintenance shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids and shavings in metal processing Cleaning in shipyards and bilge areas of ships Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• Other pumps

Electric vacuum cleaner for oil and wet/dry use! Convenient for site cleaning as it can collect oil and metal shavings.

◎Easy operation ◎Continuous operation possible ◎Convenient options 《Benefits》 ●Can be used simply by placing it on a commercially available drum ●Continuous operation possible ●Can be used as both a wet and dry vacuum and an inhalation pump 《Features》 ●For collection only (general oil, oil, chips, etc.) ●JIS standard 20L open drum (for top outer diameter 300mm±1, recommended plate thickness of 0.4mm or more) ●Automatic stop when liquid is full ●Can be used with a 100V power supply, making it versatile for any location ●Also available in 200V specifications *Please regularly clean the filter inside the cover 《Applications》 Cleaning around equipment in automotive maintenance shops and vehicles Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Collection of cutting and cutting oils in metal processing Cleaning in shipyards and bilge areas Cleaning in warehouses and aisles Collection of sludge and wastewater from septic tanks and pits Collection of welding spatter Collection of grease traps and floating oil

• Other pumps

Electric vacuum cleaner for oil and wet/dry use! Convenient for site cleaning as it can collect oil and metal shavings.

◎Easy operation ◎Continuous operation possible ◎Convenient options 《Benefits》 ●Can be used simply by placing it on a commercially available drum ●Continuous operation possible ●Can be used as both a wet and dry vacuum and an intake pump 《Features》 ●Dedicated for collection (general oil, oil, metal shavings, etc.) ●Compatible with JIS standard 20L open drums (recommended outer diameter of top 300mm±1, plate thickness of 0.4mm or more) ●Automatic stop when liquid is full ●Can be used with a 100V power supply, making it versatile for any location ●Also available in 200V specification *Please regularly clean the filter inside the cover 《Applications》 Cleaning around equipment in automotive maintenance shops and vehicles Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids and metal shavings in metal processing Cleaning in shipyards and bilge areas Cleaning in warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• Other pumps

For dust collection: Minimum recovery particle size 5.5μ! Powder and dust recovery rate over 98%.

◎Simple structure, no breakdowns ◎Easy operation ◎Convenient options 《Benefits》 ●Can be used simply by placing it on a commercially available pail ●Continuous operation possible ●Less prone to breakdown compared to electric vacuum cleaners ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●Dedicated for dust collection ●Compatible with JIS standard 20L open pail (recommended outer diameter of top 300mm±1, plate thickness of 0.4mm or more) ●Can be used with air compressors of 5 horsepower (3.75kw) or more ●Standard equipped with grounding wire ●Uses anti-static hose ●Can also be used with cyclone-type drums of 50L, 100L, and 200L *Not to be used for materials that pose a risk of dust explosion (metal powder, aluminum powder, toner, etc.) *As it is an industrial vacuum cleaner, it cannot be used for powders that directly enter the human body (food powders, medicines, etc.)

• Other pumps

【For water and water-soluble liquids / Wet and dry use】 Made of all stainless steel, does not rust in water.

◎Simple structure, no failures ◎Easy operation ◎Convenient options 《Benefits》 ●Can be used simply by placing it on a commercially available pail (stainless can (APPQO-SK) recommended) ●Continuous operation possible ●Can be used as both a wet and dry vacuum and an intake pump ●Less likely to break compared to electric vacuum cleaners ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●Dedicated for collection (general oil, water, oil, metal shavings, etc.) ●JIS standard 20L open pail can (recommended for top outer diameter of 300mm±1, plate thickness of 0.4mm or more) *Stainless can (APPQO-SK) recommended ●Automatic stop when liquid is full ●Can be used with air compressors of 5 horsepower (3.75kw) or more ●Includes air coupler 30PM

• Other pumps

【For water and water-soluble liquids / Wet and dry use】 Made of all stainless steel, does not rust even in water.

◎Simple structure, no failures ◎Easy operation ◎Convenient options 《Advantages》 ●Can be used simply by placing it on a commercially available pail (stainless can (APPQO-SK) recommended) ●Continuous operation possible ●Can be used as both a wet and dry vacuum and an intake pump ●Less prone to breakage compared to electric vacuum cleaners ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●Dedicated for collection (general oil, water, oil, metal shavings, etc.) ●JIS standard 20L open pail can (recommended for top outer diameter of 300mm±1, plate thickness of 0.4mm or more) *Stainless can (APPQO-SK) recommended ●Automatic stop when liquid is full ●Can be used with air compressors of 5 horsepower (3.75kw) or more ●Includes air coupler 30PM

• Other pumps

Reusing cutting fluids for machine tools and tank cleaning.

**APDQO Series** APDQO-FS (Stainless Steel Filter) APDQO-FF (Non-woven Fabric Filter) APDQO-FB (Bag Filter) ◎ Does not use electricity ◎ Automatically stops when full ◎ Equipped with a safety valve as standard **Benefits** ● Enables reuse of cutting fluid ● Improves tool life ● Safe with no electric leakage due to air drive ● Cleaning time as short as 5 minutes **Features** ● Designed specifically for JIS standard 200L open drums ● Capable of separating cutting fluid and chips ● Safety valve and float included as standard **Applications** The air-operated tank cleaning filtration cleaner APDQO-F series is capable of cleaning tanks of machine tools and filtering and separating both "liquids" and "solids." Therefore, in addition to filtering chips and sludge from machine tools, it can also be used for the following purposes: ● Cleaning machine tool tanks (removing chips and sludge and reusing cutting fluid) ● Separating and sorting food waste in wastewater at food processing plants (restaurants) ● Separating water and sludge from mountains and rivers ● Separating and sorting waste and sewage

• Filtration Equipment

It is possible to circulate and filter cutting fluid without stopping the machine tools.

**J-F Series** J-FF (Non-woven Fabric Filter) J-FS (Stainless Steel Filter) J-FB (Bag Filter) ◎ Does not use electricity ◎ Can be cleaned without stopping the machine ◎ Mesh can be changed as an option **Benefits** ● Cleaning can be performed without stopping the machine ● Reuse of cutting fluid is possible ● Improved tool life ● Safe due to air drive with no electric leakage ● Cleaning time as short as 5 minutes ● Compact design allows work in narrow spaces **Features** ● Diaphragm circulation type ● Continuous operation possible ● Filters available to match cutting fluids *Please be sure to use an air filter lubricator.* **Applications** ● Cleaning of machine tool tanks (removal of chips and sludge, and reuse of cutting fluid) ● Separation and sorting of food waste in food processing plants (restaurants) ● Separation of water and sludge from mountains and rivers ● Separation and sorting of waste and sewage

• Filtration Equipment

Introducing the "Tank Cleaning and Filtration Cleaner" for customers using NC lathes and MC lathes, designed to reduce work burden and achieve efficient cutting fluid management.

Are you facing any of these cleaning issues? - Cleaning tasks are cumbersome and labor-intensive, causing back pain. - Prolonged cleaning leads to unpleasant odors. - You have to stop the machines during cleaning, resulting in decreased productivity. - Accumulation of chips leads to unstable processing accuracy and defective products. When chips and sludge accumulate, it can shorten the lifespan of machine tools and increase manufacturing costs. That's where our "Filtration Cleaner" comes in as a solution! The key to the solution is the introduction of a "Filtration Machine"! We have prepared the following two types according to your needs. 1. Large Capacity Open Drum Type (APDQO-F Series) This model is compatible with 200L or 100L open drums. - Reuse of cutting fluid: Efficiently reuse filtered chips. - Improved cleaning efficiency: Significantly reduce work time. - Versatile: Capable of filtering liquids other than cutting machines. - Thorough management: Completely drain liquids to keep the tank clean. 2. Compact Circulation Type (J-F Series) This model is suitable for work in tight spaces. - Maintain production efficiency: Work without stopping the machines. - Space-saving design: Easy to install even in narrow areas. - Continuous maintenance: Regular filtration keeps cutting fluid clean at all times.

• Other pumps

[Hose Nipple Specification] Usable in various situations from daily water transfer to securing water during disasters! Despite being a manual pump, it has excellent suction capability.

◎Emergency water supply pump ◎Easy to operate 《Benefits》 ● Performance of 8m suction (no priming required) and 8m discharge ● Usable in locations without power supply ● Can handle high-viscosity liquids and waste oil 《Features》 ● Made of aluminum ● Handle can be replaced every 90° ● Easy to disassemble and assemble 《Applications》 ● Water supply and drainage pump for emergencies ● Emergency waste liquid pump for facilities such as factories ● Pump for construction and civil engineering work ● Fuel supply pump for various vehicles and machinery ● Maintenance for machinery and various facilities ● Bilge pump and emergency standby equipment for ships and boats ● Rainwater utilization system for households ● Used cooking oil collection

• Other pumps

As emergency supplies for apartments and municipalities. For replenishing drinking water during disaster emergencies.

**EDO Series** - EDO-40 (for oil, kerosene, diesel, and water / screw connection type) - EDO-50 (for oil, kerosene, diesel, and water / screw connection type) - EDO-50H (for oil, kerosene, diesel, and water / screw connection type) ◎ For emergency water supply pump ◎ Easy operation ◎ Standing action type **Benefits** ● Maximum discharge rate of 100L/min ● Powerful liquid transfer with 5m suction, 5m/7m/12m discharge ● Usable in locations without power supply ● Can handle high-viscosity liquids and waste oil ● Work can be done while standing **Features** ● Manual, 100V power supply ● Made of aluminum ● Handle can be replaced every 90° ● Easy to disassemble and assemble

• Other pumps

For outdoor storage in cold and tropical regions. A thermal cover that protects containers from strong sunlight and rain.

《COVER Series》 JD-COVER (for drum cans) IBC-COVER (for IBC containers) P-COVER (for pumps) 《Benefits》 ● Excellent light-blocking and heat-insulating properties to prevent temperature rise ● Waterproof treatment that keeps out rain and wind ● Cold-resistant, preventing deterioration of containers and pumps 《Features》 ● Can be opened and closed with Velcro ● White surface, silver finish on the inside

• Other pumps

Quickly transfer low-viscosity liquids for solvents.

◎Air-driven ◎Compatible with high-viscosity liquids 《Benefits》 ● Efficient transfer of medium-viscosity liquids ● Usable with flammable liquids and small amounts of foreign matter ● Ideal for horizontal and high-lift transfer 《Features》 ● Continuous operation possible ● Lifting capacity of 20-30m *Please be sure to use an air filter and lubricator.

• Other pumps

Ministry of Labor explosion-proof structure standard certification! A pump that can safely transport petroleum products using a pressure-resistant explosion-proof motor.

**SFC** SFC (Gasoline, Kerosene, Diesel) A safe and secure drum pump certified under the Ministry of Labor's electrical machinery and equipment explosion-proof structure standards (d2G3). **SFC Series (Explosion-Proof Motor)** When installing a gear motor in locations with flammable gases or explosive atmospheres, the motor must be one that has passed explosion-proof certification as stipulated by the Safety and Health Act. This certification system is conducted by a designated testing organization (the Japan Industrial Safety and Health Association) for each type of electrical equipment within Japan. Explosion-proof motors must have the optimal explosion-proof structure selected according to the type of explosive atmosphere and the degree of hazard. - It features an explosion-proof pressure-resistant structure classified under the explosion-proof grade defined by the Ministry of Labor's electrical machinery and equipment explosion-proof structure standards (d2G3). - It can discharge one drum in just 3.5 minutes and can operate continuously for 24 hours. - Suitable for use with kerosene, diesel, and gasoline. - Designed for use in explosion-proof storage (areas). **Benefits** - Can be used with gasoline - Comes with a manual gun nozzle for easy one-handed dispensing **Features** - Designed for JIS standard 200L closed drums - Equipped with a pressure-resistant explosion-proof structure motor for safety

• Other pumps

Safe and optimal pressure-resistant explosion-proof motor for the transfer of flammable liquids such as organic solvents and chemical agents.

**SHC-100** SHC-100 (For Solvents and Biodiesel) A safe and secure drum pump certified under the Ministry of Labor's electrical machinery and equipment explosion-proof structure standards (d2G3). It features an explosion-proof pressure-resistant structure as specified by the Ministry of Labor's electrical machinery and equipment explosion-proof structure standards (d2G3). **Benefits** ● Discharges a full drum in just 3.5 minutes and can operate continuously for 24 hours. ● Compatible with various solvents and chemicals. ● Comes with a manual gun nozzle for easy one-handed dispensing. **Features** ● Designed specifically for JIS standard 200L closed drums. ● Equipped with a pressure-resistant explosion-proof structure motor for safety. **Explosion-Proof Motor** When installing a gear motor in areas with flammable gases or explosive atmospheres, the motor must comply with the safety and health laws and pass explosion-proof certification. This certification system is conducted by designated testing organizations (Japan Industrial Safety and Health Association) appointed by the Minister of Health, Labour and Welfare, which tests electrical equipment by type. Explosion-proof motors must be selected based on the type of explosive atmosphere and the level of risk involved.

• Other pumps

Convenient for supplying AdBlue in small quantities to cargo vehicles, construction machinery, agricultural machinery, and large vehicles.

"EV Series" EV-100Ad (for AdBlue / 100V) EV-12Ad (for AdBlue / 12V) EV-24Ad (for AdBlue / 24V) ◎ PSE (Electrical Appliance and Material Safety Law) compliant product ◎ Acquired AdBlue license in 2011 Aqua System is the only pump equipment manufacturer in Japan certified by the German Association of the Automotive Industry. As the market gradually expands from trucks and buses to construction machinery and agricultural machinery, and as needs change, we are currently developing and importing AdBlue products suitable for Japan to respond to customer feedback. ◎ Three types available according to application ◎ Customizable "Benefits" ● Comes with a hose nipple, just insert the hose (recommended hose inner diameter φ19) ● Made of resin, lightweight and compact "Features" ● Power supply: AC100V, DC12V, DC24V ● Diaphragm pump type ● Built-in thermal protector for safety

• Other pumps

【For solvents / For liquids】Collecting low-viscosity liquids into closed pails.

◎Simple structure with no failures ◎Easy to operate ◎Convenient options 《Advantages》 ●Can be used simply by placing it on a commercially available closed pail can ●Continuous operation possible ●Less prone to breakage compared to electric types ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●For liquids only (general oils, etc.) ●Designed for JIS standard 20L closed pail cans ●Can be used with air compressors of 1 horsepower (0.75kw) or more ●Outer diameter dimension of the can opening (for 41mm)

• Other pumps

[For kerosene and light oil / Liquid only] Collect low-viscosity liquid into a closed pail can.

◎Simple structure with no failures ◎Easy to operate ◎Convenient options 《Benefits》 ●Can be used simply by placing it on a commercially available closed pail can ●Continuous operation possible ●Less prone to breakage compared to electric models ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●For liquids only (general oils, etc.) ●Designed for JIS standard 20L closed pail cans ●Can be used with air compressors of 1 horsepower (0.75kw) or more ●Outer diameter dimension of the can opening (for 41mm)

• Other pumps

【For Oil / Liquid Only】Collecting low-viscosity liquids into closed pails.

◎Simple structure that is trouble-free ◎Easy to operate ◎Convenient options 《Benefits》 ●Can be used simply by placing it on a commercially available closed pail can ●Continuous operation is possible ●Less prone to breakage compared to electric models ●Air-driven, so it's safe in explosion-proof areas with no risk of ignition 《Features》 ●For liquids only (general oils, etc.) ●Designed for JIS standard 20L closed pail cans ●Can be used with air compressors of 1 horsepower (0.75kw) or more ●Outer diameter dimension of the can opening (for 41mm)

• Other pumps

[For kerosene and light oil / Liquid only] Collect low-viscosity liquid into open pails.

◎Simple structure, no worries about breakdowns ◎Easy operation ◎Convenient options 《Benefits》 ●Can be used simply by placing it on a commercially available pail ●Can suck up one pail in about 15 seconds ●Continuous operation possible ●Less prone to breaking compared to electric models ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●For liquids only (general oils, etc.) ●Compatible with JIS standard 20L open pails (recommended outer diameter of 300mm±1 and plate thickness of 0.4mm or more) ●Automatic stop when liquid is full ●Can be used with air compressors of 1 horsepower (0.75kw) or more

• Other pumps

Collection of low-viscosity liquids into open pails for oil/liquid use.

◎Simple structure, no worries about breakdowns ◎Easy operation ◎Convenient options 《Benefits》 ●Can be used simply by placing it on a commercially available pail ●Sucks up one pail in about 15 seconds ●Can operate continuously ●Less likely to break compared to electric models ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●Liquid only (general oils, etc.) ●Compatible with JIS standard 20L open pail (recommended for top outer diameter of 300mm±1 and plate thickness of 0.4mm or more) ●Automatic stop when liquid is full ●Can be used with air compressors of 1 horsepower (0.75kw) or more

• Other pumps

For dispensing AdBlue in locations without power, for refilling from a back-in-box.

"Ad-3 Series" Ad-3 (for AdBlue / battery-operated) Ad-3-100 (for AdBlue / electric) ◎ PSE (Electrical Appliance and Material Safety Law) compliant product ◎ Acquired AdBlue license in 2011 Aqua System is the only pump equipment manufacturer in Japan certified by the German Association of the Automotive Industry. As the market gradually expands from trucks and buses to construction and agricultural machinery, and needs change, we are currently developing and importing AdBlue products suitable for Japan in response to customer feedback. "Benefits" ● Lightweight and compact ● Can be refilled in places without power or air ● No need to lift the box ● Can dispense approximately 26 boxes with 2 AA batteries "Features" ● For back-in-box use * Back-in-box sold separately ● Two types: battery-operated and 100V ● Comes with a 2.5m hose (hose extension is not possible) ● Includes a hand nozzle * Auto-stop function is not included.

• Other pumps

Ideal for liquid level management.

**ZKT Series** ZKT-D-OL (for oil / for drums) ZKT-D-W (for water / for drums) ZKT-P-OL (for oil / for drums) ZKT-P-W (for water / for drums) **Benefits** ● Liquid level detection in just 1 second ● The liquid contact pipe is made of stainless steel, making it durable ● Lightweight and easy to carry **Liquid Level Gauge Series** E-C (for oil) **Benefits** ● Lightweight and affordable ● Enables liquid management inside drums ● No electricity or batteries required ● Usable liquids include kerosene, light oil, oil, and water *Solvents and chemicals are not allowed*

• Other pumps

Check the remaining amount in just 1 second by pressing a button! Liquid level gauge for drums and pails!

**ZKT Series** ZKT-D-OL (for oil / for drums) ZKT-D-W (for water / for drums) ZKT-P-OL (for oil / for pails) ZKT-P-W (for water / for pails) **Advantages** ● Liquid level detection in just 1 second ● Durable stainless steel contact pipe section ● Lightweight and easy to carry **Features** ● Capacitive type ● Can use either AA batteries or 100V power supply *Note: If using dry batteries, 2 AA batteries are required* ● Liquid level indication with 10 levels of LED ● Available for drums and pails, for oil and water *Note: Not suitable for flammable liquids* *Note: In addition to water and oil, can accommodate various liquids (custom specifications)*

• Other pumps

It is convenient to attach it to the end of the hose when combined with an electric pump or air pump for AdBlue and water.

**Merits** - Easy operation at your fingertips - Cost reduction through liquid management **Features** - Dispenses when gripped, stops when released - Includes lever hook - Equipped with flow meter - Not usable with free fall or siphon methods

• Other pumps

It is convenient to attach it to the end of the hose when combined with an electric pump or air pump for AdBlue and water.

**Merits** - Easy operation at hand - Cost reduction through liquid management **Features** - Dispenses when gripped, stops when released - Includes lever hook - Equipped with flow meter - Not suitable for use with free fall or siphon methods

• Other pumps

It is convenient to attach it to the end of the hose when combined with an electric pump or air pump for AdBlue and water.

**Merits** ● Easy operation at your fingertips ● Cost reduction in liquid management **Features** ● Dispenses when gripped, stops when released ● Equipped with a lever hook ● Includes a flow meter ● Not usable with natural drop or siphon methods

• Other pumps

It is convenient to attach it to the end of the hose when combined with electric pumps or air pumps for oil, light oil, and kerosene.

《Merits》 ● Easy operation at your fingertips ● Usable even with self-weight drop * Please pay attention to the operating pressure. ● Lightweight aluminum construction 《Features》 ● Squeeze to dispense, release to stop ● Lever hook included

• Other pumps

Purifying diesel exhaust gases with AdBlue! When you want to quickly portion out AdBlue from a resin drum.

◎AdBlue license obtained in 2011 AdBlue: Trademarked product ◎Flow meter specifications 《Advantages》 ● Lightweight and compact ● Flow meter can also be installed ● Continuous operation possible 《Features》 ● PSE (Electrical Appliance and Material Safety Law) compliant ● Dedicated for JIS standard 200L closed drum (large cap G2) * Optional specifications available with Kodama resin or Sanko adapters ● Air motor ● Maximum discharge head of 3m, maximum discharge volume of 25L/min ● Standard equipped with circuit breaker (automatic stop for heat and overcurrent) * Reset by pressing the breaker. 《What is AdBlue?》 High-quality urea solution AdBlue is a urea water solution with a concentration of 32.5%. It is colorless, transparent, and harmless to humans and animals. Diesel vehicles that adopt a urea SCR system to reduce nitrogen oxides require AdBlue to be supplied in the same way as fuel. By injecting urea water into the exhaust to mix with NOx, it decomposes NOx into nitrogen and water, contributing to the improvement of diesel vehicles' clean performance.

• Other pumps

Hand-cranked pump that performs exceptionally well even in emergencies! Lightweight with a resin body, ideal for dispensing organic solvents.

**HRP Series** HRP-25Z (for solvents) HRP-25ZM (for solvents / with hose and sealed adapter) ◎ Hand-cranked pump that does not require a power source ◎ Widely usable from household drums to factories ◎ Lightweight body made of resin ◎ Suction pipe can be cut **Benefits** ● Simple operation by just turning the handle ● Lightweight and easy to replace ● No power source required ● Can also dispense highly flammable organic solvents in small quantities ● Suitable for low-viscosity liquids (below 500 cP) with specific gravity (below 1.1) ● Safe for highly volatile liquids with a sealed adapter (HRP-25ZM) ● Very useful in emergencies and disasters ● Can handle weak acids and weak alkali chemicals with resin material (HRP-25Z series) **Features** ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● Continuous pumping is possible ● Securely fixed to the drum with an adapter ● Comes with a 40 mesh strainer to prevent foreign matter contamination ● Specifications can be selected according to the liquid *Note on stainless steel hose: Flexible hoses have a limited range of motion; bending them excessively may cause tearing.*

• Other pumps

Hand-cranked pump that performs exceptionally well even in emergencies! Lightweight body made of resin, suitable for dispensing organic solvents.

**HRP Series** HRP-25III (For solvents) HRP-25IIIH (For solvents / with hose) HRP-25IIIHM (For solvents / with hose, sealed adapter, and ground wire) ◎ Hand-cranked pump that requires no power source ◎ Widely usable from household drums to factories ◎ Lightweight body made of resin ◎ Suction pipe can be cut **Advantages** ● Simple operation by just turning the handle ● Lightweight and easy to replace ● No power supply needed ● Can also dispense highly flammable organic solvents ● Suitable for low-viscosity liquids (below 500 cP) with specific gravity (below 1.1) ● Safe for highly volatile liquids with sealed adapter (HRP-25III HM) ● Great for emergencies and disasters **Features** ● Dedicated for JIS standard 200L closed drums (large cap G2) ● Continuous pumping is possible ● Securely fixed to the drum with an adapter ● Comes with a 40 mesh strainer to prevent foreign matter contamination ● Specifications can be selected according to the liquid *Note on stainless steel hose: Flexible hoses have a limited range of motion, and forcing them to bend may cause them to tear.*

• Other pumps

Hand-cranked pump that performs exceptionally well even in emergencies! Made of all stainless steel, perfect for dispensing organic solvents.

**HRD Series** HRD-25SUS (for solvents) HRD-25SUSH (for solvents / with hose) HRD-25SUSHM (for solvents / with hose, sealed adapter, and grounding wire) ◎ Hand-cranked pump that does not require a power source ◎ Can be widely used from household drums to factories ◎ Continuous pumping is possible ◎ Suction pipe can be cut **Benefits** ● Easy operation by simply turning the handle ● No power supply required ● Can dispense highly flammable organic solvents in small quantities ● Suitable for low-viscosity liquids (below 500 cP) with specific gravity (below 1.5) ● Safe for highly volatile liquids with sealed adapter (HRD-25SUSHM) ● Very useful in emergencies and disasters **Features** ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Continuous pumping is possible ● Securely fixed to the drum with an adapter ● Equipped with a 40 mesh strainer to prevent foreign matter contamination ● Specifications can be selected according to the liquid *Note on stainless steel hose: Flexible hoses have a limited range of motion, and forcing them to bend may cause tearing.*

• Other pumps

[Sanitary Product / Heller Joint Specification] Designed for the large-volume transfer of high-viscosity liquids; it is disassemblable for cleaning! This is a separate type air vacuum pump.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Compatible with high-viscosity liquids ◎ Can be stored in a sealed manner ◎ Low failure rate 《Benefits》 ● Safely suction volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ● Automatic stop when full ● Easy to clean due to a structure that allows for disassembly ● Available with sanitary-grade ferrule fittings ● The sanitary type has a proven track record for food use (APDQS-1s, 1.5s) * Not applicable under the Food Sanitation Act 《Features》 ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Closed drum negative pressure type, suction only, no discharge ● Separate pressure reduction section (G3/4) and suction section (G2) 《Mechanism of the Air Vacuum Pump》 This pump collects various liquids such as kerosene, light oil, oil, and chemicals from closed drums. It can efficiently and safely collect without using electricity through an ejector mechanism. The collected drums can be handed directly to waste disposal companies. * Please contact the disposal company for disposal methods.

• Other pumps

[Sanitary product / H-elbow fitting specification] For large-capacity transfer of high-viscosity liquids; can be disassembled for cleaning.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Compatible with high-viscosity liquids ◎ Can be stored in a sealed manner ◎ Low failure rate 《Benefits》 ● Safely suction volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of minor foreign substances ● Continuous operation possible ● Automatic stop when full ● Easy to clean due to a structure that allows for disassembly ● Available in sanitary specifications with hygienic fittings ● Sanitary type has a proven track record for food use (APDQS-1s, 1.5s) * Not applicable under the Food Sanitation Act 《Features》 ● Dedicated to JIS standard 200L closed drums (large plug G2) ● Closed drum vacuum type for suction only, discharge not possible ● Separate pressure reduction section (G3/4) and suction section (G2) 《Mechanism of the Air Vacuum Pump》 This pump collects various liquids such as kerosene, light oil, oil, and chemicals from closed drums. It can efficiently and safely collect without using electricity through an ejector mechanism. The collected drums can be handed directly to waste disposal companies. * Please contact the disposal company for disposal methods.

• Other pumps

For solvents, acids, and alkalis: A separate type air vacuum pump for transferring high-viscosity liquids in large volumes, capable of disassembly and cleaning!

◎Explosion-proof design that does not use electricity ◎Double safety structure for peace of mind ◎Compatible with high-viscosity liquids ◎Can be stored in a sealed manner ◎Low failure rate 《Benefits》 ●Safely suction volatile and flammable liquids ●Quiet operation driven by a 1 horsepower compressor ●Low air consumption and energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Automatic stop when full ●Easy to clean due to a structure that allows for disassembly ●Available with sanitary-grade ferrule fittings ●Sanitary type has a proven track record in food use (APDQS-1s, 1.5s) *Does not comply with the Food Sanitation Act 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Closed drum vacuum system for suction only, discharge not possible ●Separated pressure reduction section (G3/4) and suction section (G2) 《Mechanism of the Air Vacuum Pump》 This pump collects various liquids such as kerosene, light oil, oil, and chemicals from closed drums. It can safely and efficiently collect without using electricity thanks to the ejector mechanism. The collected drum can be handed directly to a waste disposal company. *Please contact the disposal company for disposal methods.

• Other pumps

For oil: Large-capacity transfer of high-viscosity liquids; disassemblable for cleaning.

◎Explosion-proof design that does not use electricity ◎Double safety structure for peace of mind ◎Compatible with high-viscosity liquids ◎Can be stored in a sealed manner ◎Low failure rate 《Advantages》 ● Safely suction volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ● Automatic stop when full ● Easy to clean due to a structure that allows for disassembly ● Available in sanitary-grade hygienic fittings ● Sanitary type has a proven track record in food use (APDQS-1s, 1.5s) *Does not comply with the Food Sanitation Act 《Features》 ● Dedicated to JIS standard 200L closed drums (large plug G2) ● Closed drum vacuum system for suction only, discharge not possible ● Separate pressure reduction section (G3/4) and suction section (G2) 《Mechanism of Air Vacuum Pump》 This pump collects various liquids such as kerosene, diesel, oil, and chemicals from closed drums. It can efficiently and safely recover without using electricity through an ejector mechanism. The collected drums can be handed directly to waste disposal companies. *Please contact the disposal company for disposal methods.

• Other pumps

Clean the factory effortlessly! Introducing the air-powered drum vacuum cleaner in a comic, along with the air-powered tank cleaning and filtration cleaner for cleaning around machine tools.

You can download the manga by scrolling down and clicking on the first "catalog." Aqua System sells a variety of air-powered products for factories. We introduce an air-powered vacuum cleaner that can be used immediately by simply placing it on a 20L drum and connecting the air hose, with its benefits and examples clearly illustrated in a manga format. It is a wet and dry type, capable of collecting both debris and liquids. We also offer tank cleaning filtration cleaners that can filter coolant tanks for machine tools such as NC lathes and machining centers. You can use the tank cleaning filtration cleaner for filtration and collect floating oil with the vacuum cleaner, among other combinations. Why not use our tank cleaning filtration cleaner and vacuum cleaner for a thorough year-end cleaning of machine tools, their surroundings, and the entire factory? Since it is air-driven, it can be used in areas where open flames are prohibited. ■ Lower price, safe, and long lifespan compared to electric vacuum cleaners ■ Collection of cutting fluid from machine tools and collection of cutting chips around machines ■ Collection of waste liquid mixed with chips ■ Collection of sludge from wastewater treatment tanks ■ Can also be used for drum can collection by setting a top plate!

• Industrial Vacuum Cleaners

Convenient when attached to the end of a hose in combination with an electric pump or air pump for AdBlue and water! The gun nozzle automatically stops when full.

◎Stop without using electricity or batteries This is a nozzle that automatically stops when full, using a liquid level sensor without the need for electricity or batteries. The auto-stop function operates at a constant flow rate and pressure, so it cannot be used with gravity drop. *Please pay attention to the operating pressure and flow rate range. *The flow meter uses batteries. 《Advantages》 ● Easy operation at your fingertips ● Automatically stops when full ● Cost reduction through liquid management 《Features》 ● Dispenses when squeezed, stops when released ● Includes lever hook ● Equipped with a flow meter ● Not usable with gravity drop or siphon methods

• Other pumps

Water absorption of 6m (2.5m when dry) and a lift height of 15m. Usable in locations without power supply.

"Yatsunami Wing Pump Series" - CAC-CAC 15A to 50A (All brass / for water) - CAC-CAC JIS5K 15A to 50A (All brass / for water) - CAC-CAC JIS10K 15A to 50A (All brass / for water) ◎ For emergency water supply pumps ◎ Liquid transfer "Benefits" ● Suction performance of 6m (2.5m when dry) and discharge of 15m ● Trusted and proven performance used in ships for many years ● Usable in locations without power supply "Features" ● Two types available: with screw-type flange and JIS standard round flange * No flange for JIS 5K type and JIS 10K type ● Additionally available in brass (for oil) and gasoline specifications

• Other pumps

Water absorption of 6m (2.5m when dry) and a lift height of 15m. Usable in locations without power supply.

"Yatsunami Wing Pump Series" - FC-CAC 15A to 50A (Brass for key parts / for oil) - FC-CAC JIS5K 15A to 50A (Brass for key parts / for oil) - FC-CAC JIS10K 15A to 50A (Brass for key parts / for oil) ◎ For emergency water supply pumps ◎ Liquid transfer "Benefits" ● Performance of 6m suction (2.5m when dry) and 15m discharge ● Trusted and proven performance used in ships for many years ● Usable in locations without power supply "Features" ● Two types: screw-type flange and JIS standard round flange * No phase flange for JIS 5K type and JIS 10K type ● Separate brass for water and gasoline specifications available

• Other pumps

Ideal for transporting drums. Easy to move with large wheels!

Drum Can Transport Carrier Trolley (TORRY-D) Ideal for transporting drum cans. Equipped with large vehicle wheels, it makes moving drum cans easy and features a fall prevention lock for safe transportation. <Main Workplaces Where It Excels> Recommended as a pump for work sites and contractors using AdBlue. <Obtained AdBlue License in 2011> Aqua System is the only pump equipment manufacturer in Japan certified by the German Association of the Automotive Industry. As the market gradually expands from trucks and buses to construction machinery and agricultural machinery, and as customer needs change, we are currently developing and importing AdBlue products suited to Japan. <What is AdBlue?> High-quality urea water AdBlue is a urea water solution with a concentration of 32.5%. It is colorless, transparent, and harmless to humans and animals. Diesel vehicles that adopt urea SCR systems to reduce nitrogen oxides require AdBlue to be supplied in the same way as fuel. By injecting urea water into the exhaust to mix with NOx, it decomposes NOx into nitrogen and water, contributing to the improvement of the clean performance of diesel vehicles.

• Trolley

A heater that warms up drums and other containers to reduce the viscosity of liquids.

"HTJ Series" HTJ-A-P (for pails and one-gallon cans) HTJ-B-50D (for 50L drums) HTJ-C-100D (for 100L drums) HTJ-C-200D (for 200L drums) HTJ-HHD (for 200L drums) HTJ-HP2D (for 200L drums) HTJ-IBC1-40 (for IBC containers) HTJ-IBC2-90 (for IBC containers) ◎ Selectable by container type "Benefits" ● Completely covers the container, making it less likely to cool down ● Foldable, requiring less space for storage "Features" ● Compatible with 6 types of containers, temperature adjustment via dial ● Three types of outer covering material, simply wrap around the container and secure with a band <Common Specifications> Power Supply (V): 100 <Usable Liquids> - Oil - Water-based paint - Triethanolamine * Not suitable for flammable liquids. * The product shown in the video is from the time of filming. The design and specifications may differ at the current time or during the sales period. Thank you for your understanding.

• Other heaters
• Heater

The liquid contact materials have been upgraded to SUS, PTFE, and FFKM, allowing for a greater variety of compatible liquids compared to our previous model (CHD-20SUS)! Suitable for solvent transfer in chemical plants.

**CHD1 Series** CHD1-20SUS (for solvents) CHD1-20SUSV (for solvents / with ball valve) CHD1-20SUSN (for solvents / with gun nozzle) ● Continuous operation possible ● Lightweight and compact body ● Inexpensive **Features** ● Compliant with PSE (Product Safety of Electrical Appliances and Materials) for safety and security ● Dedicated to JIS standard 200L closed drums (large plug G2) ● For low viscosity solvents (below 100cP) ● Discharge rate of 22L/min ● For discharge only **Applications** Not only in metal plating factories and semiconductor manufacturing, but also in chemical plants, pharmaceutical warehouses, and more. Additionally used in water treatment, pharmaceuticals, laboratories, schools, and hospitals. For areas with high volatility, high flammability, explosion-proof zones, and no open flame areas, please use the air-operated model (CHD1-20ASUSN). **Suitable for use in the following areas!** ■ Lithium batteries (secondary batteries) ■ Dyeing, semiconductor, disinfectant manufacturing, automotive, and electrical appliance factories ■ Surface treatment in metal plating factories ■ New energy sector **Compatible with the following liquids!** ■ Ethyl acetate ■ Butyl acetate ■ Hydrogen peroxide ■ Sodium hydroxide ■ Nitric acid (30% concentration)

• Other pumps

Portable electric hand pump. High-speed transfer of kerosene and diesel.

"EVP Series" EVPD56-100 (for kerosene and light oil / for drum cans) EVPD-56ATN (for kerosene and light oil / for drum cans / with auto-stop gun) EVPD-56K24 (for kerosene and light oil / for drum cans / with flow meter) EVPD-56K24ATN (for kerosene and light oil / for drum cans / with auto-stop gun and flow meter) ◎ Flow meter and auto-stop gun specifications ◎ Customizable Benefits: ● Maximum discharge rate of 46L per minute ● Various applications available with flow meter and auto-stop gun options ● Continuous operation possible Features: ● Designed specifically for JIS standard 200L closed drum cans (large plug G2) ● Single-phase AC 100V (200V version also available) ● Built-in relief valve and 100μm filter ● Available in hose connection type for drum cans ● Spiral centrifugal pump

• Other pumps

Ideal for liquid management - a mechanical flow meter that measures discharge volume.

"Flow Meter Series" MK33-25D (for kerosene and light oil) MK33-25OL (for oil) ◎Mechanical simple battery-operated flow meter It has a large size, making it easy to read from a distance. It is inexpensive and allows for liquid management of kerosene and light oil. *Not suitable for gasoline. 《Advantages》 ● Large and easy-to-read simple disc-type flow meter with mechanical digital display ● No risk of ignition or explosion due to its mechanical nature ● Free movement in four directions 《Features》 ● Calibration is possible ● Easy reset by turning the lever

• Other pumps

Oil-use JIS standard drum can liquid level gauge! For managing residual liquid in drum cans.

**Merits** ● Lightweight and affordable ● Capable of managing liquids inside a drum ● No electricity or batteries required ● Usable liquids include kerosene, light oil, oil, and water *Solvents and chemicals are not allowed* **Features** ● Designed specifically for JIS standard 200L closed drums *Can be attached to both the large (G2) and small (G3/4) openings of the drum* ● Accuracy error is approximately ±5cm ● Display method is percentage display (shows remaining amount from the bottom of the drum) *When the remaining liquid reaches 30%, it will display yellow, and when it reaches 10%, it will display red* *If there is more than 65% remaining, the float cannot be removed* ● This product is for indoor use only *Do not use outdoors*

• Other pumps

A convenient stand with a tray that allows for the vertical storage of a drum pump.

**Merits** - The pump is protected from damage, making it easy to store and retrieve. - The suction pipe opening remains clean. - It takes up little space, so finding a place to put it is not a problem. **Features** - Comes with a tray to prevent liquid drips from residual liquid in the pump. - Vertical storage with adjustable height. - Includes a hose hook to keep the hose off the floor. - Size (length × width × height): 520 × 410 × 996 (mm). - Material: SUS.

• Other pumps

Drum pump nozzle storage available for drum cans.

**Merits** - No trouble finding a place for the gun nozzle - No scratches on the nozzle - No dirt on the drum can or floor **Features** - Easy installation with a hex wrench - Compatible with manual nozzles to auto-stop nozzles *Note: Thick gun nozzles like ATPS-10 are not compatible* - Simply hook onto the edge of the drum can's top - Size (L/W/H) 73.2×51×70 (mm) - Material: SUS

• Other pumps

Ideal for managing AdBlue liquid - Digital flow meter for measuring discharge volume.

◎ Simple battery-operated flow meter with turbine digital method It is compact, making it easy to combine with a gun nozzle. It is inexpensive and allows for the management of AdBlue liquid. *Not waterproof. Do not immerse the meter in liquid. ◎ Display panel orientation can be changed The display panel can be attached in four directions with just one screwdriver. 《Advantages》 ● Compact, making it easy to combine with a gun nozzle ● Allows for checking the discharge amount at hand 《Features》 ● Calibration with a repeatability of 0.2% ● Digital display screen (uses two AA batteries) ● By attaching a socket, one side can be converted to a female thread *Please be careful of liquid leakage when connecting, as the connection port has parallel threads.

• Other pumps

[For kerosene and light oil] Ideal for liquid management, digital flow meter to measure discharge volume.

◎ Simple battery-operated flow meter with turbine digital method It is a compact flow meter that is easy to combine with a gun nozzle. It is inexpensive and allows for the management of kerosene and light oil. * Not suitable for gasoline. ◎ Display panel orientation can be changed The display panel can be switched to four directions with just one screwdriver. 《Advantages》 ● Compact size makes it easy to combine with a gun nozzle ● Allows for confirmation of discharge volume at hand 《Features》 ● Calibration with a repeatability of 0.2% ● Digital display screen (uses two AA batteries) ● By attaching a socket, one side can be converted to a female thread * Please be careful of liquid leakage during connection as the connection port has parallel threads.

• Other pumps

Convenient when attached to the end of a hose in combination with an electric pump or air pump for AdBlue and water! The gun nozzle automatically stops when full.

◎Stop without using electricity or batteries This is a nozzle that automatically stops when full, using a liquid level sensor without the need for electricity or batteries. The auto-stop function operates at a constant flow rate and pressure, so it cannot be used with gravity drop. *Please pay attention to the operating pressure and flow rate range. *The flow meter uses batteries. 《Advantages》 ● Easy operation at hand ● Automatically stops when full ● Cost reduction through liquid management 《Features》 ● Dispenses when squeezed, stops when released ● Includes lever hook ● Equipped with a flow meter ● Not usable with gravity drop or siphon methods

• Other pumps

Convenient when attached to the end of a hose in combination with an electric pump or air pump for AdBlue and water! The gun nozzle automatically stops when full.

◎Stop without using electricity or batteries This is a nozzle that automatically stops when full, using a liquid level sensor without the need for electricity or batteries. The auto-stop function operates at a constant flow rate and pressure, so it cannot be used with gravity drop. *Please pay attention to the usage pressure and flow rate range. *The flow meter uses batteries. 《Advantages》 ●Easy operation at your fingertips ●Automatically stops when full ●Cost reduction through liquid management 《Features》 ●Dispenses when squeezed, stops when released ●Includes a lever hook ●Equipped with a flow meter ●Not usable with gravity drop or siphon methods

• Other pumps

It's convenient to attach it to the end of a hose when combined with an electric pump or air pump! Cost management with oil management allows for measuring, weighing, and stopping with preset quantities.

《Merits》 ● Easy operation at your fingertips ● Stops at the specified amount ● Cost reduction through liquid management 《Features》 ● Dispenses when gripped, stops when released ● Equipped with a lever hook ● Includes a flow meter ● Not usable with free fall or siphon methods ● The nozzle at the tip is of the automatic nozzle type ● The battery unit has a completely sealed separation structure for safety

• Other pumps

It's convenient to attach it to the end of a hose when combined with an electric pump or air pump! The auto-stop gun nozzle automatically stops when full.

"Measuring Auto Stop Gun Nozzle Series" ATNH-20 (25) K24 (for light oil, kerosene, gasoline) ATNH-FAK24 (for light oil, kerosene / exclusive for FA-100) ATNH-FRK24 (for light oil, kerosene / exclusive for FR-200) *Not suitable for oil or biodiesel. ◎ Stops without using electricity or batteries This nozzle automatically stops when full, using liquid level detection without electricity or batteries. Since the auto stop functions at a constant flow rate and pressure, it cannot be used with gravity drop. *Please pay attention to the usage pressure and flow rate range. *The flow meter uses batteries. 《Advantages》 ● Easy operation at your fingertips ● Automatically stops when full ● Cost reduction through liquid management 《Features》 ● Dispenses when gripped, stops when released ● Includes lever hook ● Equipped with flow meter ● Not suitable for use with gravity drop or siphoning

• Other pumps

It is convenient to attach it to the end of a hose when combined with an electric pump or air pump for oil use.

**Merits** ● Easy operation at your fingertips ● Cost reduction in liquid management **Features** ● Dispenses when gripped, stops when released ● Includes lever hook ● Equipped with a flow meter ● Not usable with free fall or siphon use

• Other pumps

It is convenient to attach it to the end of a hose when combined with an electric pump or air pump.

"Measurement Manual Gun Nozzle Series" GN-AL3025K24 (for light oil and kerosene) GN-AL3025K24FA (for light oil and kerosene / exclusive for FA-100) GN-AL3025K24FR (for light oil and kerosene / exclusive for FR-200) "Benefits" ● Easy operation at your fingertips ● Cost reduction through liquid management "Features" ● Dispenses when squeezed, stops when released ● Includes lever hook ● Equipped with flow meter ● Not suitable for use with natural drop or siphon methods

• Other pumps

It is convenient to attach it to the end of a hose when combined with an electric pump or air pump for light oil and kerosene.

**Merits** - Easy operation at hand - Cost reduction through liquid management **Features** - Dispenses when gripped, stops when released - Includes lever hook - Equipped with flow meter - Not usable with free fall or siphon methods

• Other pumps

The 【ATNP-PP25Ad/ATNP-SUS20-Ad】 is convenient when attached to the end of a hose in combination with electric pumps or air pumps!

◎Stop without using electricity or batteries This nozzle has a mechanism that automatically stops when full, using liquid level detection without the need for electricity or batteries. Auto-stop functions with a constant flow rate and pressure, so it cannot be used with gravity drop. *Please pay attention to the usage pressure and flow rate range. 《Advantages》 ● Easy operation at hand ● Automatically stops when full 《Features》 ● Dispenses when gripped, stops when released ● Includes a lever hook ● Not usable with natural drop or siphon methods

• Other pumps

Convenient when attached to the end of a hose in combination with electric pumps or air pumps for solvents! The gun nozzle automatically stops when full.

◎Stop without using electricity or batteries This is a nozzle that automatically stops when the liquid level is detected to be full, without using electricity or batteries. The auto-stop function operates at a constant flow rate and pressure, so it cannot be used with gravity drop. *Please pay attention to the operating pressure and flow rate range. 《Advantages》 ● Easy operation at hand ● Automatically stops when full 《Features》 ● Dispenses when gripped, stops when released ● Includes a lever hook ● Not usable with natural drop or siphon methods

• Other pumps

It's convenient to attach it to the end of a hose when combined with an electric pump or air pump! The gun nozzle automatically stops when it's full.

"Auto Stop Gun Nozzle Series" ATNH-20 (25) (for light oil and kerosene) ATNH-FA (for light oil and kerosene / exclusive for FA-100) *Cannot be used with oil, gasoline, or biodiesel. ◎ Stops without using electricity or batteries This nozzle automatically stops when full, using a liquid level sensor without electricity or batteries. The auto stop functions at a constant flow rate and pressure, so it cannot be used with gravity drop. *Please pay attention to the usage pressure and flow rate range. 《Benefits》 ● Easy operation at your fingertips ● Automatically stops when full 《Features》 ● Dispenses when gripped, stops when released ● Includes lever hook ● Not usable with natural drop or siphon methods

• Other pumps

It is convenient to attach it to the end of the hose when combined with an electric pump or air pump for solvents.

"Merits" ● Easy operation at your fingertips ● Usable even with self-weight drop * Please pay attention to the operating pressure. "Features" ● Dispenses when gripped, stops when released ● Equipped with a lever hook

• Other pumps

It is convenient to attach it to the end of the hose when combined with an electric pump or air pump for AdBlue.

"Merits" ● Easy operation at your fingertips ● Usable even with self-weight drop * Please be cautious of the operating pressure. "Features" ● Squeeze to dispense, release to stop ● Equipped with a lever hook

• Other pumps

It is convenient to attach it to the end of a hose when combined with an electric pump or air pump for water use.

"Benefits" ● Easy operation at your fingertips ● Usable even with self-weight drop * Please be careful with the operating pressure. "Features" ● Dispenses when gripped, stops when released ● Includes lever hook

• Other pumps

[For Oil] A hand-operated pump that performs exceptionally well even in emergencies! High discharge capacity of 1L per rotation, suitable for transferring low-viscosity liquids.

◎Hand-cranked pump that requires no power source ◎Can be used without sealing the drum ◎Widely usable from household drums to factories ◎Inlet pipe can be cut 《Advantages》 ●Easy operation by simply turning the handle ●Discharges one drum in about 5 minutes ●No power supply needed ●Can be used with A heavy oil and low viscosity oils (below 500 cP) ●Very useful in emergencies and disasters 《Features》 ●Designed specifically for JIS standard 200L closed drums (large plug G2) ●Continuous pumping is possible ●Securely fixed to the drum with an adapter ●Includes a 60 mesh strainer *The material of the hose during replacement will be PVC (transparent). 《Mechanism of the Hand Rotary Pump》 This pump transfers liquid using internal vanes. It is operated by hand rotation for easy discharge and is designed for simple use.

• Other pumps

It is convenient to attach it to the end of a hose when combined with electric pumps or air-operated pumps for solvents, AdBlue, and water.

"Merits" ● Easy operation at your fingertips ● Usable even with self-weight drop * Please pay attention to the operating pressure. "Features" ● Squeeze to dispense, release to stop ● Equipped with a lever hook

• Other pumps

It is convenient to attach it to the end of a hose when combined with electric pumps or air pumps for solvents.

"Merits" ● Easy operation at your fingertips ● Usable even with self-weight drop * Please pay attention to the operating pressure. "Features" ● Dispenses when gripped, stops when released ● Includes lever hook

• Other pumps

It is convenient to attach it to the end of a hose when combined with electric pumps or air pumps for oil, diesel, kerosene, and gasoline.

《Merits》 ● Easy operation at your fingertips ● Usable even with self-weight drop * Please pay attention to the operating pressure. 《Features》 ● Squeeze to dispense, release to stop ● Equipped with a lever hook

• Other pumps

Easily dispense AdBlue from an IBC container with a supply tank located at a high position! There are also types that automatically stop when full and allow you to check the amount used.

◎Obtained AdBlue license in 2011 AdBlue: Trademarked product 《Benefits》 ● Easy to portion with one hand thanks to the manual gun nozzle 《Features》 ● Compliant with PSE (Electrical Appliance and Material Safety Law) ● For IBC containers ● Power supply is AC100V ● Lightweight manual gun nozzle made of resin with nozzle storage 《What is AdBlue?》 High-quality urea water AdBlue is a urea aqueous solution with a concentration of 32.5%. It is colorless, transparent, and harmless to humans and animals. Diesel vehicles equipped with urea SCR systems to reduce nitrogen oxides require AdBlue to be supplied in the same way as fuel. By injecting urea water into the exhaust to mix with NOx, it breaks down NOx into nitrogen and water, contributing to the improved clean performance of diesel vehicles.

• Other pumps

Easily dispense AdBlue from IBC containers with a supply tank located at a high position! There are also types that automatically stop when full and allow you to check the usage amount.

◎Obtained AdBlue license in 2011 AdBlue: Trademarked product 《Benefits》 ● Flow rate can be checked on-site with a flow meter ● Automatic stop when small containers are full 《Features》 ● Compliant with PSE (Electrical Appliance and Material Safety Law) ● For IBC containers ● Power supply is AC100V ● Lightweight resin flow meter integrated nozzle with nozzle storage 《What is AdBlue?》 High-quality urea water AdBlue is a urea aqueous solution with a concentration of 32.5%. It is colorless, transparent, and harmless to humans and animals. Diesel vehicles that adopt a urea SCR system to reduce nitrogen oxides require AdBlue to be supplied in the same way as fuel. By injecting urea water into the exhaust to mix with NOx, it decomposes NOx into nitrogen and water, contributing to the improvement of the clean performance of diesel vehicles.

• Other pumps

Easily dispense AdBlue from IBC containers with a supply tank located at a high position! There are also types that automatically stop when full and allow you to check the usage amount.

◎Acquired AdBlue license in 2011 AdBlue: Trademarked product 《Benefits》 ● Flow rate can be checked at hand with a flow meter ● Automatic stop when the small container is full 《Features》 ● Compliant with PSE (Electrical Appliance and Material Safety Law) ● For IBC containers ● Power supply is AC100V ● Lightweight resin flow meter integrated nozzle with nozzle storage 《What is AdBlue?》 High-quality urea water AdBlue is a urea water solution with a concentration of 32.5%. It is colorless, transparent, and harmless to humans and animals. Diesel vehicles that adopt a urea SCR system to reduce nitrogen oxides require AdBlue to be supplied just like fuel. By injecting urea water into the exhaust to mix with NOx, it decomposes NOx into nitrogen and water, contributing to the improvement of the clean performance of diesel vehicles.

• Other pumps

AdBlue for purifying diesel exhaust gases! Dispensing AdBlue in places without a power supply.

◎Obtained AdBlue license in 2011 AdBlue: Trademarked product ◎Flow meter and auto-stop gun specifications 《Benefits》 ● Complies with PSE (Electrical Appliance and Material Safety Law) ● Lightweight and compact ● Auto-stop gun and flow meter can also be installed ● Can be refilled in places without power or air ● Can dispense approximately 6 barrels after charging 《Features》 ● For IBC containers ● Lithium-ion charging (charging time: 2 hours) ● Maximum discharge rate: HIGH: 30L/min ● Continuous usage time: HIGH: 20 minutes, LOW: 40 minutes 《What is AdBlue?》 High-quality urea solution AdBlue is a urea water solution with a concentration of 32.5%. It is colorless, transparent, and harmless to humans and animals. Diesel vehicles that adopt a urea SCR system to reduce nitrogen oxides require AdBlue to be supplied just like fuel. By injecting urea water into the exhaust to mix with NOx, it decomposes NOx into nitrogen and water, contributing to the improvement of diesel vehicle clean performance.

• Other pumps

AdBlue for purifying diesel exhaust gases! When you want to quickly portion out AdBlue contained in an IBC container.

◎AdBlue license obtained in 2011 AdBlue: Trademarked product ◎Flow meter specifications 《Advantages》 ● Lightweight and compact ● Flow meter can also be installed ● Continuous operation possible 《Features》 ● PSE (Electrical Appliance and Material Safety Law) compliant ● For IBC containers ● Air motor ● Maximum discharge head of 3m, maximum discharge rate of 25L/min ● Standard equipped with circuit breaker (automatic stop for heat and overcurrent) * Reset by pressing the breaker 《What is AdBlue?》 High-quality urea water AdBlue is a urea aqueous solution with a concentration of 32.5%. It is colorless, transparent, and harmless to humans and animals. Diesel vehicles that adopt a urea SCR system to reduce nitrogen oxides must supply AdBlue in the same way as fuel. By injecting urea water into the exhaust to mix with NOx, it decomposes NOx into nitrogen and water, contributing to the improvement of the clean performance of diesel vehicles.

• Other pumps

AdBlue for purifying diesel exhaust gases! When you want to quickly portion out AdBlue contained in an IBC container.

◎Obtained AdBlue license in 2011 AdBlue: Trademarked product ◎Flow meter and auto-stop gun specifications 《Benefits》 ● Lightweight and compact ● Auto-stop gun and flow meter can also be installed 《Features》 ● Compliant with PSE (Electrical Appliance and Material Safety Law) ● For IBC containers ● Power supply is AC100V ● Maximum discharge head of 5m, maximum discharge rate of 30L/min ● Standard equipped with circuit breaker (automatic stop for heat and overcurrent) * It can be reset by pressing the breaker 《What is AdBlue?》 High-quality urea water AdBlue is a urea water solution with a concentration of 32.5%. It is colorless, transparent, and harmless to humans and animals. Diesel vehicles that adopt a urea SCR system to reduce nitrogen oxides must supply AdBlue in the same way as fuel. By injecting urea water into the exhaust to mix with NOx, it decomposes NOx into nitrogen and water, contributing to the improvement of the clean performance of diesel vehicles.

• Other pumps

AdBlue for purifying diesel exhaust gases! Dispensing AdBlue in places without power.

◎Obtained AdBlue license in 2011 AdBlue: Trademarked product ◎Flow meter and auto-stop gun specifications 《Benefits》 ● Lightweight and compact ● Compatible with auto-stop guns and flow meters ● Can be refilled in places without power or air ● Can dispense approximately 6 drums after charging 《Features》 ● Compliant with PSE (Electrical Appliance and Material Safety Law) ● Designed specifically for JIS standard 200L closed drums (large cap G2) *Optional adapters made of Kodama resin and Sankoh are also available ● Lithium-ion charging (charging time: 2 hours) 《What is AdBlue?》 High-quality urea solution AdBlue is a urea water solution with a concentration of 32.5%. It is colorless, transparent, and harmless to humans and animals. Diesel vehicles that adopt a urea SCR system to reduce nitrogen oxides require AdBlue to be supplied in the same way as fuel. By injecting urea water into the exhaust to mix with NOx, it decomposes NOx into nitrogen and water, contributing to the improvement of the clean performance of diesel vehicles.

• Other pumps

Purifying diesel exhaust gases with AdBlue! When you want to quickly portion out AdBlue contained in a resin drum.

◎Obtained AdBlue license in 2011 AdBlue: Trademarked product ◎Flow meter and auto-stop gun specifications 《Benefits》 ● Lightweight and compact ● Auto-stop gun and flow meter can also be installed 《Features》 ● Compliant with PSE (Electrical Appliance and Material Safety Law) ● Dedicated to JIS standard 200L closed drums (large cap G2) * Optional specifications available with Kodama resin or Sanko adapters ● Power supply is AC100V ● Maximum discharge head of 5m, maximum discharge volume of 30L/min ● Standard equipped with circuit breaker (automatic stop for heat and overcurrent) * Can be reset by pressing the breaker. 《What is AdBlue?》 High-quality urea water AdBlue is a urea water solution with a concentration of 32.5%. It is colorless, transparent, and harmless to humans and animals. Diesel vehicles that adopt a urea SCR system to reduce nitrogen oxides require AdBlue to be supplied in the same way as fuel. By injecting urea water into the exhaust to mix with NOx, it decomposes NOx into nitrogen and water, contributing to the improvement of the clean performance of diesel vehicles.

• Other pumps

[Oil, kerosene, light oil, and water / screw connection specification] For transferring fuel or water in places without power or during emergencies! Large capacity type 2,000cc/stroke.

◎Emergency water supply pump ◎Easy to operate ◎Standing action type 《Benefits》 ● Performance of 4m suction (no priming required) and 7m discharge ● Usable in locations without power supply ● Can handle high-viscosity liquids and waste oil ● Allows for work while standing ● Large capacity of 2,000cc per stroke 《Features》 ● Made of aluminum ● Handle can be replaced every 90° ● Easy to disassemble and assemble 《Applications》 ● Water supply and drainage pump for emergencies ● Emergency waste liquid pump for facilities such as factories ● Pump for construction and civil engineering work ● Fuel supply pump for various vehicles and machinery ● Maintenance for machinery and various facilities ● Bilge pump and emergency standby equipment for ships and boats ● Rainwater utilization system for households ● Waste cooking oil collection 《As an emergency pump》 ● Capable of suctioning up to the 2nd or 3rd floor of a building ● Usable for refueling emergency power supplies on building rooftops ● For transferring toilet water or water tanks in emergencies

• Other pumps

[Oil, kerosene, light oil, and water / screw connection specification] For transferring fuel or water in places without power or during emergencies! Emergency water supply pump kit.

◎Emergency water supply pump ◎Easy to operate ◎Standing action type 《Benefits》 ● Performance of 5m suction (no priming required) and 7m discharge ● Usable in locations without power supply ● Can handle high-viscosity liquids and waste oil ● Work can be done while standing ● Hose attachment and detachment is easy with lever coupling 《Features》 ● Made of aluminum ● Handle can be replaced every 90° ● Easy to disassemble and assemble 《Applications》 ● Water supply and drainage pump for emergencies ● Emergency waste liquid pump for facilities such as factories ● Pump for construction and civil engineering work ● Fuel supply pump for various vehicles and machinery ● Maintenance for machinery and various facilities ● Bilge pump and emergency equipment for ships and boats ● Rainwater utilization system for households ● Waste cooking oil collection 《Set Contents》 ● Diaphragm pump: ST-HDOS-32 (40) ALB: 1 unit ● Lever couplings: 2 pieces (32・40) ● Strainer: 1 piece ● Discharge hose: 1 piece, 5m with coupler (Φ32・Φ38) ● Suction hose: 1 piece, 3m with coupler (Φ32・Φ38) ● Handle: 1 piece

• Other pumps

[For oil, kerosene, diesel, and water / Screw connection specification] Ideal for transferring fuel or water in places without power or during emergencies! Despite being a manual pump, it has excellent suction capability.

◎Emergency water supply pump ◎Easy to operate ◎Standing action type 《Benefits》 ● Performance of 5m suction (no priming needed) and 7m discharge ● Usable in locations without power supply ● Can handle high-viscosity liquids and waste oil ● Allows work to be done while standing 《Features》 ● Made of aluminum ● Handle can be replaced every 90° ● Easy to disassemble and assemble 《Applications》 ● Water supply and drainage pump for emergencies ● Emergency waste liquid pump for facilities such as factories ● Pump for construction and civil engineering work ● Fuel supply pump for various vehicles and machinery ● Maintenance for machinery and various facilities ● Bilge pump and emergency equipment for ships and boats ● Rainwater utilization system for households ● Used cooking oil collection 《As an emergency pump》 ● Can suction up to the 2nd or 3rd floor of a building ● Can be used for refueling emergency power supply on building rooftops ● For transferring toilet water or water tanks in emergencies

• Other pumps

[For oil, kerosene, diesel, and water / Screw connection specification] Ideal for transferring fuel or water in places without power or during emergencies! Despite being a manual pump, it has excellent suction capability.

◎Emergency water supply pump ◎Easy to operate 《Benefits》 ● Performance of 5m suction (no priming required) and 7m discharge ● Usable in locations without power supply ● Can handle high-viscosity liquids and waste oil 《Features》 ● Made of aluminum ● Handle can be replaced every 90° ● Easy to disassemble and assemble 《Applications》 ● Water supply and drainage pump for emergencies ● Emergency waste liquid pump for facilities such as factories ● Pump for construction and civil engineering work ● Fuel supply pump for various vehicles and machinery ● Maintenance for machinery and various facilities ● Bilge pump and emergency equipment for ships and boats ● Rainwater utilization system for households ● Used cooking oil collection

• Other pumps

【All brass / water use】 Water absorption 6m (2.5m when dry) with a performance of 15m lift! Usable in places without power supply.

◎Emergency water supply pump ◎Liquid transfer ◎Material of the frame 《Advantages》 ● Performance of 6m suction (2.5m when dry) and 15m discharge ● Trusted and proven performance used in ships for many years ● Usable in locations without power supply 《Features》 ● Two types: screw-type phase flange and JIS standard round flange ※ No phase flange for JIS 5K type and JIS 10K type ● Separate options available for bronze (for oil) and gasoline specifications 《Set contents》 ● Frame: 1 unit ● Wing pump: available with 1 or 2 units ● Male couplings: 1 each for suction and discharge ※ Hose and female couplings are not included 《Regarding pipe orientation》 The wing pump cannot be used with the pipe orientation changed. Please install the suction side down and the discharge side up. The valve is designed to close under its own weight, and if placed sideways or upside down, the valve will not close, preventing liquid from being discharged. 《Difference between Yatsunami and King》 The King has a lower discharge volume compared to the Yatsunami. Additionally, the King does not have a round flange type or all-bronze type.

• Other pumps

Easily dispense high-viscosity liquids from pails or drums into smaller containers.

◎Manual pump that requires no power source ◎Compatible with high-viscosity liquids 《Advantages》 ● No power supply needed ● For high-viscosity liquids (up to 10,000 cP) ● Can dispense oils that become hard in winter ● SUS construction compatible with various solvents (P-SX, P-SXT) ● Very useful in emergencies and disasters 《Features》 ● For 41mm outer diameter of pails and one-gallon cans (standard 40mm adapter included) *Optional 50mm adapter also available ● Continuous pumping is possible ● Discharges when the piston is pulled up using an up-and-down piston mechanism *For high-viscosity liquids, please pull the handle up slowly.

• Other pumps

Quickly transfer low-viscosity liquids for oil, kerosene, diesel, and gasoline.

◎Air-driven ◎Compatible with high-viscosity liquids 《Benefits》 ●Efficiently transfers medium-viscosity liquids ●Can be used with flammable liquids and small amounts of foreign matter ●Ideal for horizontal and high-lift transfers 《Features》 ●Continuous operation possible ●Lifting capacity of 20-30m *Please be sure to use an air filter and lubricator.

• Other pumps

Quickly transfer low-viscosity liquids for solvents.

◎Air-driven ◎Two types: plastic and stainless steel 《Advantages》 ● Safely transfers highly flammable liquids ● Transfers approximately 20L in about 1 minute ● Capable of transferring to high places ● Usable with plastic cans and one-gallon cans 《Features》 ● Comes with a ball valve ● Available in two types: stainless steel and plastic *Please be sure to use an air filter and lubricator.

• Other pumps

Quickly transfer low-viscosity liquids for solvents.

◎Electric 100V ◎Two types: made of resin and stainless steel 《Advantages》 ● Usable anywhere with a 100V power source ● Transfers approximately 20L in about 1 minute ● Capable of transferring to high places ● Usable with plastic cans and one-gallon cans 《Features》 ● With ball valve ● Two types: stainless steel and resin

• Other pumps

Easily dispense high-viscosity liquids from pails or drums for solvent use.

◎Manual pump that requires no power source ◎Compatible with high-viscosity liquids 《Advantages》 ● No power supply needed ● For high-viscosity liquids (up to 10,000 cP) ● Can dispense oils that become solid in winter ● SUS model compatible with various solvents (P-SX, P-SXT) ● Extremely useful in emergencies and disasters 《Features》 ● For 41mm outer diameter of pails and drums (40mm adapter included as standard) *Optional 50mm adapter also available ● Continuous pumping is possible ● Discharges when the piston is pulled up using an up-and-down piston mechanism *For high-viscosity liquids, please pull the handle up slowly.

• Other pumps

【For solvents / For liquids only】Collecting low-viscosity liquids into open pails.

◎Simple structure, no worries about breakdowns ◎Easy operation ◎Convenient options 《Benefits》 ●Can be used simply by placing it on a commercially available pail ●Can suck up one pail in about 15 seconds ●Continuous operation possible ●Less prone to breaking compared to electric models ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●For liquids only (general oils, etc.) ●Compatible with JIS standard 20L open pail (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ●Automatic stop when liquid is full ●Can be used with air compressors of 1 horsepower (0.75kw) or more

• Other pumps

【For kerosene and light oil / Liquid only】 Waste liquid recovery from 5 meters below the underground pit.

◎Compatible with high-viscosity liquids due to vacuum pressure type ◎Simple structure with no failure ◎Easy operation ◎Convenient options 《Advantages》 ●Can be used just by placing it on a stainless steel can ●Continuous operation possible ●Less prone to breakage compared to electric types ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●For liquids only (general oils, etc.) ●Recommended for stainless steel cans (APPQO-SK) ●Automatic stop when liquid is full ●Can be used with air compressors of 5 horsepower (3.75 kW) or more

• Other pumps

For oil/liquid use: Waste liquid recovery from underground pits 5 meters deep.

◎Compatible with high-viscosity liquids due to vacuum pressure type ◎Simple structure with no failures ◎Easy operation ◎Convenient options 《Benefits》 ●Can be used simply by placing it on a stainless steel can ●Continuous operation possible ●Less prone to breakage compared to electric types ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●Liquid-specific (general oils, etc.) ●Recommended for stainless steel cans (APPQO-SK) ●Automatic stop when the liquid is full ●Can be used with air compressors of 5 horsepower (3.75 kW) or more

• Other pumps

For solvent/liquid only: Waste liquid recovery from 5 meters below the underground pit.

◎Compatible with high-viscosity liquids due to vacuum pressure type ◎Simple structure with no failures ◎Easy operation ◎Convenient options 《Advantages》 ●Can be used simply by placing it on a stainless steel can ●Continuous operation possible ●Less prone to breakage compared to electric types ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●Liquid-specific (general oils, etc.) ●Recommended for stainless steel cans (APPQO-SK) ●Automatic stop when the liquid is full ●Can be used with air compressors of 5 horsepower (3.75 kW) or more

• Other pumps

Just by moving the handle up and down, you can transfer high-viscosity liquids.

"Straight Series" S-LX (for solvents) S-LXHS (for solvents / with hose) ◎ Hand piston pump that requires no power source ◎ Compatible with high-viscosity liquids ◎ Continuous pumping possible with siphon function "Benefits" ● No power supply needed ● Suitable for high-viscosity liquids (up to 10,000 cP) with a specific gravity of 1.5 or less ● Can dispense oils that become hard in winter (S-L series) ● Very useful in emergencies and disasters "Features" ● Dedicated for JIS standard 200L closed drums (large cap G2) ● Continuous pumping capability ● Discharges when the piston is pulled up using an up-and-down piston mechanism * Please pull the handle slowly for high-viscosity liquids ● Siphon works for low-viscosity liquids ● Discharge volume per stroke is 600 cc "Mechanism of the piston pump" It is a mechanism that discharges simply by attaching it to a drum and moving the upper piston up and down. It discharges when the upper piston is pulled up. The discharge volume per stroke is 600 cc. This pump is suitable for extracting small amounts of liquid from a drum. Its simple structure is characterized by low failure rates.

• Other pumps

Just by moving the handle up and down, you can transfer high-viscosity liquids.

"Straight Series" S-L (for oil) S-LH-1 (for oil / with hose) ◎ Hand piston pump that requires no power source ◎ Suitable for high-viscosity liquids ◎ Continuous pumping possible with siphon function "Benefits" ● No power supply needed ● Compatible with high-viscosity liquids (up to 10,000 cP) with a specific gravity of 1.5 or less ● Can dispense winter oils that become thick (S-L series) ● Very useful in emergencies and disasters "Features" ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● Continuous pumping possible ● Discharges when the piston is pulled up using an up-and-down piston mechanism * For high-viscosity liquids, please pull the handle up slowly ● Siphon works for low-viscosity liquids ● Discharge volume per stroke is 600cc "Mechanism of the piston pump" It is a mechanism that discharges simply by attaching it to a drum and moving the upper piston up and down. It discharges when the upper piston is pulled up. The discharge volume per stroke is 600cc. This pump is suitable for extracting small amounts of liquid from a drum. Its simple structure is characterized by low failure rates.

• Other pumps

[For Oil] Hand-crank pump that performs exceptionally well even in emergencies! For transferring low-viscosity liquids.

◎Hand-cranked pump that requires no power source ◎Can be used without sealing the drum ◎Widely usable from household drums to factories ◎Inlet pipe can be cut 《Advantages》 ●Easy operation by simply turning the handle ●No power supply needed ●Can be used with A heavy oil and low viscosity oil (below 500cP) ●Very useful in emergencies and disasters 《Features》 ●Designed specifically for JIS standard 200L closed drums (large cap G2) ●Continuous pumping is possible ●Securely fixed to the drum with an adapter ●No strainer *The material during hose replacement will be PVC (transparent). 《Mechanism of the Hand Rotary Pump》 This pump transfers liquid using internal vanes. It discharges by manual rotation, making it easy to operate.

• Other pumps

Ideal for sites where electricity is unavailable! Air diaphragm pump with stepless adjustment function.

The "ADO Series (ADO-40/ADO-50)" is a safety air-driven diaphragm pump suitable for sites where electricity cannot be used, such as tunnel construction and underground work. It comes with a stepless adjustment feature (air speed controller) and can also be used for disaster response. Additionally, we offer electric hybrid diaphragm pumps "EDO-40/50" and hand diaphragm pumps "HDO Series." 【Features】 ■ Stepless adjustment feature ■ Safety air-driven ■ Safe as it does not use electricity, preventing electric leakage ■ Ideal for water suction work in narrow spaces, small holes, and confined areas ■ Usable for disaster response *For more details, please refer to the PDF materials or feel free to contact us.

• Other pumps

High-speed drum vacuum cleaner capable of collecting large volumes, up to 200L.

"APPQO Series" APPQO-HP2 (For Oil / Wet and Dry Use) ◎ Simple structure with no failures ◎ Easy operation ◎ Convenient options "Benefits" ● Can be used simply by placing it on a drum with the top plate ● Continuous operation possible ● Usable as both a suction pump and a vacuum cleaner for wet and dry applications ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, making it safe for use in explosion-proof areas with no fire risk "Features" ● For collection only (general oil, oils, metal shavings, etc.) ● Designed specifically for JIS standard 200L open drums ● Automatic stop when liquid is full ● Usable with air compressors of 10 horsepower (7.5 kW) or more ● Recommended air hose size of 3/8 or larger

• Industrial Vacuum Cleaners

Portable electric handheld pump! High-speed transfer of kerosene and diesel.

"EVP Series" EVPH56-100 (for kerosene and light oil / both ends with hose) ◎ Flow meter and auto-stop gun specifications ◎ Customizable "Benefits" ● Maximum discharge rate of 46L per minute ● Available with flow meter and auto-stop gun, suitable for various applications ● Continuous operation possible "Features" ● Dedicated to JIS standard 200L closed drum (large plug G2) ● AC single-phase 100V (200V version also available) ● Built-in relief valve and 100μm filter ● Also available in a drum can type with hose connection ● Spiral centrifugal pump "How the Vane Pump Works" The center of the pump body is slightly offset from the center of the vane, creating a structure where the vanes operate due to centrifugal force. It adopts a principle of operation that increases pressure by reducing the volume with the vanes.

• Other pumps

For transferring kerosene and light oil from a drum.

"FA Series" FA-100ATN (for kerosene and light oil / with auto-stop gun) FA-100K24 (for kerosene and light oil / with flow meter) FA-100ATNK24 (for kerosene and light oil / with auto-stop gun and flow meter) ◎ Koshin FA-100 Utilizes an impeller inside the suction pipe, allowing for efficient transfer of liquids from drums. ◎ Flow Meter and Auto-Stop Gun Specifications A lineup with flow meters and auto-stop guns is available for liquid management of kerosene and light oil. 《Benefits》 ● Compatible with FA-100 ● Available with flow meters and auto-stop guns for various applications 《Features》 ● Dedicated to JIS standard 200L closed drums (large cap G2) ● 30-minute rated ● Convenient household power AC-100V drum pump ● Equipped with relief valve

• Other pumps

[For kerosene and light oil / Pump only] Easy-to-carry electric handheld pump! High-speed transfer of kerosene and light oil.

"EVP Series" EVP56-100 (for kerosene and light oil / pump only) ◎ Flow meter and auto-stop gun specifications ◎ Customizable "Benefits" ● Maximum discharge rate of 46L per minute ● Available with flow meter and auto-stop gun, suitable for various applications ● Continuous operation possible "Features" ● Dedicated to JIS standard 200L closed drum (large cap G2) ● Single-phase AC 100V (200V version also available) ● Built-in relief valve and 100μm filter ● Also available in a hose connection type for drum cans ● Spiral centrifugal pump "Mechanism of Vane Pump" The center of the pump body is slightly offset from the center of the vane, creating a structure where the vanes operate due to centrifugal force. It adopts a principle of operation that increases pressure by reducing volume with the vanes.

• Other pumps

Pursuing reasonable prices! For the transfer of hydrogen peroxide (30% concentration) and nitric acid (30% concentration).

**CHD Series** CHD-20HP (For Solvents) CHD-20HPV (For Solvents / With Ball Valve) CHD-20HPN (For Solvents / With Gun Nozzle) **Advantages** ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Motor part can be replaced **Features** ● Compliant with PSE (Product Safety of Electrical Appliances and Materials) for safety and security ● Dedicated for JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● For dispensing only **Replacing the Motor Head** The head part (motor part) can be easily detached and replaced, allowing for the air motor type to be switched to an electric type. 1. Remove the four screws connecting the motor and the pipe (pump part) with a screwdriver. 2. Reassemble in the same manner to complete the replacement. **Regarding the Ball Valve and Gun Nozzle** ● Ball Valve (V) By installing a ball valve, valve opening and closing operations are possible during liquid dispensing. ● Gun Nozzle (N) Operable with one hand, allowing for opening and closing operations at hand, easy to install with just one screwdriver. *Note: Liquids that corrode stainless steel cannot be used (some SUS parts are present inside the nozzle).*

• Other pumps

Pursuing reasonable prices! For the transfer of hydrogen peroxide (30% concentration) and nitric acid (30% concentration)! Electric chemical drum pump.

**CHD Series** CHD-20PP (for solvents) CHD-20PPV (for solvents / with ball valve) CHD-20PPN (for solvents / with gun nozzle) **Advantages** ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Motor part can be replaced **Features** ● Compliant with PSE (Product Safety of Electrical Appliances and Materials) for safety and security ● Dedicated to JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● For discharge only **Replacement of Motor Head** The head part (motor part) can be easily detached and replaced, allowing for the air motor type to be switched to an electric type. 1. Remove the four screws connecting the motor and pipe (pump part) with a screwdriver. 2. Reassemble in the same manner to complete the replacement. **Regarding Ball Valve and Gun Nozzle** ● Ball Valve (V) By installing a ball valve, valve opening and closing operations are possible during liquid discharge. ● Gun Nozzle (N) Operable with one hand, allowing for opening and closing operations at hand, easy to install with just one screwdriver. *Note: Liquids that corrode stainless steel cannot be used (some SUS parts are inside the nozzle).*

• Other pumps

Portable electric handheld pump! Suitable for transferring medium viscosity oil to high places.

"EVH Series" EVH-100 (for oil / 100V) EVH-200 (for oil / 200V) EVH-12 (for oil / 12V) EVH-100H (for oil / 100V) *Not suitable for kerosene, light oil, solvents, etc. ◎ Three types to suit your needs ◎ Compatible with high-viscosity liquids ◎ Customizable 《Benefits》 ● Can handle general oil VG400 and gear oil SAE140 at 15℃ ● High discharge pressure of 0.45MPa allows for use at heights or over long distances ● Lever coupling type for easy one-touch attachment and detachment ● Options for flow meters and manual nozzles available for various applications ● EVH-100H is optimal for discharging large amounts of oil below 1,000cP 《Features》 ● Power supply options: AC100V, 200V (single phase) and DC12V ● Rated for 20 minutes *Please be careful as motor overheating can cause failure ● Maximum lift height of 30m ● Available in a drum can type with hose connection

• Other pumps

An electric drum pump that is relatively suitable for high-viscosity oil and optimal for transferring to high places.

**EVD Series** EVD-100 (for oil / 100V) EVD-200 (for oil / 200V) EVD-12 (for oil / 12V) EVD-100H (for oil / 100V) *Not suitable for kerosene, light oil, solvents, etc.* ◎ Three types to suit your needs ◎ Compatible with high-viscosity liquids ◎ Customizable **Benefits** ● Capable of handling general oil VG400 and gear oil SAE140 at 15°C ● High discharge pressure of 0.45MPa allows for use at high locations or over long distances ● Lever coupling type for easy one-touch attachment and detachment ● Options for flow meters and manual nozzles available for various applications ● EVD-100H is optimal for discharging large amounts of oil below 1,000cP **Features** ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● Power supply options include AC100V, 200V (single phase), and DC12V ● Rated for 20 minutes *Please be cautious as prolonged use may cause motor burnout* ● Maximum lift height of 30m ● Also available in a drum can and hose connection type

• Other pumps

Portable electric handheld pump! Ideal for transferring high-viscosity oil and for use at high altitudes as an electric type.

"EV Series" EV-100H (for oil / 100V) *Not suitable for kerosene, light oil, solvents, etc. ◎ Three types to suit your needs ◎ Compatible with high-viscosity liquids ◎ Customizable "Benefits" ● Capable of handling general oil VG400 and gear oil SAE140 at 15°C ● High discharge pressure of 0.45MPa allows for use at heights or over long distances ● Lever coupling type for easy one-touch attachment and detachment ● Options for flow meters and manual nozzles available for various applications ● EV-100H is optimal for discharging large amounts of oil below 1,000 cP "Features" ● Power supply options include AC100V, 200V (single-phase), and DC12V ● Rated for 20 minutes *Please be cautious as motor overheating may cause failure ● Maximum lift height of 30m ● Available in drum-type and hose connection types

• Other pumps

Radial piston type air-operated handy pump that can be used in explosion-proof areas and is easy to carry! For transferring liquids from tanks or drums such as kerosene and diesel.

"AMVH Series" AMH1D-20FC (For oil, kerosene, and light diesel / For drums) ◎ Explosion-proof design that does not use electricity ◎ Can be used without sealing the drum ◎ Customizable "Benefits" ● Capable of transferring medium viscosity liquids (up to 2,000 cP) ● Safe due to air-driven operation with no risk of electric leakage ● Can be used as a circulation pump due to continuous operation capability "Features" ● Maximum lift height of 15m ● Radial piston motor type vane pump ● Available in a hose connection type for drums "Mechanism of the Radial Piston Motor" A motor that operates by alternately compressing air into three pistons. With three pistons built-in, it is characterized by high discharge pressure. It can transfer high viscosity liquids (up to 2,000 cP) to heights and distances within 15m.

• Other pumps

Air-operated portable hand pump for solvents / pump unit and drum can, suitable for use in explosive areas.

ACH Series" ACH-20SUS (for solvents / pump only) ACHD-20SUS (for solvents / for drum cans) ◎ Explosion-proof design that does not use electricity ◎ Can be used without sealing the drum can ◎ Customizable "Benefits" ● Recommended for circulating low-viscosity liquids ● Maximum discharge rate of 50L/min ● Safe due to air-driven operation, with no risk of electric leakage ● Can be used as a circulation pump due to continuous operation capability "Features" ● Maximum lift height of 5m ● Spiral-type centrifugal pump ● Also available in a hose connection type for drum cans "How Centrifugal Pumps Work" A centrifugal pump is suitable for drawing low-viscosity liquids with minimal height difference, utilizing the centrifugal force generated by a rapidly rotating impeller shaped like a spiral inside. It is also referred to as a "spiral pump.

• Other pumps

Air-operated portable hand pump for kerosene and light oil, suitable for use in explosive areas, with both ends for drum cans and hoses.

ACH Series" ACH-20AL (for kerosene and light oil / pump only) ACHD-20AL (for kerosene and light oil / for drums) ACHH-20AL (for kerosene and light oil / hose at both ends) ◎ Explosion-proof specification that does not use electricity ◎ Can be used without sealing the drum ◎ Customizable "Benefits" ● Recommended for circulating low-viscosity liquids ● Maximum discharge rate of 50L/min ● Safe due to air drive, with no risk of electric leakage ● Can be used as a circulation pump due to continuous operation capability "Features" ● Maximum lift height of 5m ● Spiral-type centrifugal pump ● Available in types for drums and hose connections "How Centrifugal Pumps Work" A centrifugal pump is suitable for drawing low-viscosity liquids with minimal height differences, utilizing the centrifugal force generated by a rapidly rotating impeller shaped like a spiral inside. It is also referred to as a "spiral pump.

• Other pumps

Collecting everything from cast iron powder to PET bottles. An environmentally friendly, manual cleaner that doesn't require electricity.

**AJL Series** AJL550S AJL750S AJL920S ◎ No power source required ◎ Side brushes included as standard **Benefits** ● Push-type, so no power source needed ● No power cord, can be used on roads and in parks ● Just push and walk, easy to operate for women and the elderly ● Comes with a collection bucket, no need to get hands dirty when emptying ● Can collect PET bottles and empty cans (AJL550S/AJL750S) ● Equipped with a roller brush to collect fine debris (AJL920S) **Features** ● Collects garbage just by pushing ● No power source required ● Floor height adjustment feature ● Two side brushes included as standard ● Dust box that can be removed with one touch ● Adjustable handle and brush height ● No backflow of debris with dual side brushes ● Can be stored upright, saving storage space

• Other pumps

Make the work environment even more comfortable and convenient! 'Options'

"Options" are convenient items that make the work environment even more comfortable. 【Product List】 ■ Drum Carrier DC-NBR ■ Top Plate for Vacuum Pump & Cleaner DTB ■ Filter Band ■ T-Type Nozzle APPQO-TN ■ Filter Set ■ Pail Can Holder ■ Two Filters ■ Drum Stand D-STAND ■ Gun Holder GN-H *For more details, please refer to the catalog or feel free to contact us.

• Other pumps

Ideal for managing liquid levels.

**ZKT Series** ZKT-D-OL (for oil / for drums) ZKT-D-W (for water / for drums) ZKT-P-OL (for oil / for drums) ZKT-P-W (for water / for drums) **Benefits** ● Liquid level detection in just 1 second ● The contact pipe section is made of stainless steel, making it durable ● Lightweight and easy to carry **Liquid Level Gauge Series** E-C (for oil) **Benefits** ● Lightweight and affordable ● Enables liquid management inside drums ● No electricity or batteries required ● Usable liquids include kerosene, light oil, oil, and water *Solvents and chemicals are not allowed*

• Other pumps

It is convenient to attach it to the end of a hose when combined with an electric pump or air pump. The gun nozzle automatically stops when it is full.

"Auto Stop Gun Nozzle Series" ATNH-20 (25) (for diesel and kerosene) ATNH-FA (for diesel and kerosene / dedicated to FA-100) ATNH-FR (for diesel and kerosene / dedicated to FR-200) ATNH-20 (25) T (for solvents) ATNP-PP25-Ad (for AdBlue) ATNP-SUS20-Ad (for AdBlue) ◎ Stops without using electricity or batteries This nozzle automatically stops when full, using a liquid level sensor without the need for electricity or batteries. Auto stop functions at a constant flow rate and pressure, so it cannot be used with free fall. *Please pay attention to the operating pressure and flow rate range. 《Benefits》 ● Easy operation at your fingertips ● Automatically stops when full 《Features》 ● Dispenses when gripped, stops when released ● Includes lever hook ● Not usable with free fall or siphon methods

• Other pumps

It is convenient to attach it to the end of a hose when combined with an electric pump or an air pump.

"Manual Gun Nozzle Series" GN-SUS20 (25) (For Solvents) "Benefits" ● Easy operation at your fingertips ● Usable even with self-weight drop * Please pay attention to the operating pressure. "Features" ● Squeeze to dispense, release to stop ● Lever hook included

• Other pumps

Organization of the workspace and securing space (tabletop rack, single-tier rack, double-tier rack, riser)

《RACK Series》 ● Single-tier rack (chrome) RACK1-M ● Single-tier rack (stainless steel) RACK1-S ● Double-tier rack (chrome) RACK2-M ● Double-tier rack (stainless steel) RACK2-SUS ● Tabletop rack (chrome) RACKT-M ● Tabletop rack (stainless steel) RACKT-S ● Elevating device (chrome) RACKC-M ● Elevating device (stainless steel) RACKC-SUS 《Benefits》 ● By placing cans, space can be secured and organized, making the workspace tidy ● Using the elevating device allows for efficient liquid extraction 《Features》 ● Usable for both pail cans and one-gallon cans ● Available in two materials: chrome and stainless steel

• Other pumps

For dispensing liquids from a drum. Simply insert into the small opening of the drum for air release.

"Drum Cock Series" DMA-5 (For Oil) "Benefits" ● Easy to install, can be stored while attached ● Air can be released by opening and closing the screw ● No power source required ● Prevents vaporization of highly volatile liquids when used in conjunction with the drum cock "Features" ● Designed specifically for JIS standard 200L closed drums (small plug G3/4) ● Air release ● Easy installation

• Other pumps

For dispensing liquids from a drum. A convenient faucet that can be used like a server.

"Drum Cock Series" DMO-10 (for oil) DMY-20 (for solvent) DMY-100 (for oil / valve diameter Φ12.5) DMY-150 (for oil / valve diameter Φ16.0) DMY-200 (for oil / valve diameter Φ20.0) DMY-250 (for oil / valve diameter Φ24.5) DMN-30 (for high viscosity oil and solvent) ◎ Easy installation and operation Simply screw it into the drum can for connection. Operation is as easy as twisting the upper lever. 《Benefits》 ● Easy installation, can be stored while attached ● Viscosity and material can be selected according to the liquid used 《Features》 ● Dedicated for JIS standard 200L closed drum cans (large plug G2) ● Mechanism to dispense liquid by placing the can horizontally and using its own weight ● Easy installation

• Other pumps

For dispensing liquids from pails and one-gallon cans. A convenient faucet that allows for easy pouring like a server.

"Pail Cock Series" ND-40 (for oil / can discharge outlet outer diameter Φ40.8) ND-50 (for oil / can discharge outlet outer diameter Φ48.8) ◎ Easy to install and operate Simply screw it into a one-gallon can or pail can for connection. *If the spout is made of resin, it will be a custom order, so please contact us. It cannot be used with standard products. 《Benefits》 ● Easy installation, can be stored with the cock attached ● Viscosity and material can be selected according to the liquid used ● Compatible with high-viscosity liquids 《Features》 ● Designed specifically for pail cans and one-gallon cans with spout outer diameters (Φ40.8・Φ48.8) ● Mechanism for dispensing liquid by placing the can horizontally and using its own weight ● Easy installation ● Two sizes of installation openings available (Φ40.8・Φ48.8) *For pail cans and one-gallon cans, the size of the can discharge outlet refers to the outer size, not the inner size of the outlet.

• Other pumps

For dispensing liquids from pails and one-gallon cans. A convenient faucet that allows for easy dispensing like a server.

"Pail Cock Series" SP-L40 (For solvents / Can discharge outlet outer diameter Φ40.8) SP-L50 (For solvents / Can discharge outlet outer diameter Φ48.8) * Pail (P), One-gallon can (I) ◎ Easy to install and operate Simply screw it into a one-gallon can or pail for connection. Operation is as easy as twisting the upper lever. * If the spout is made of resin, it will require a custom order, so please inquire. It cannot be used with standard products. ◎ Lever Lock The lever is locked, so there is no worry of leakage if the lever is accidentally bumped during operation. 《Benefits》 ● No need to drill holes in the can ● Smooth discharge without pulsation ● Easy installation, can be stored with the cock attached ● Viscosity and material can be selected according to the liquid used 《Features》 ● Designed specifically for pails and one-gallon cans with spout outer diameters (Φ40.8 and Φ48.8) ● Mechanism for dispensing liquid by placing the can horizontally and using its own weight ● Air release and lever lock included ● Easy installation ● Two sizes of installation ports available (Φ40.8 and Φ48.8) * For pails and one-gallon cans, the size of the can discharge outlet refers to the outer diameter, not the inner diameter.

• Other pumps

No need to puncture the can, pulsation-free and splash-proof barrel tap.

"Pail Cock Series" PC-40PP (For Oil) ◎ Automatic Air Feeding Function Thanks to a new mechanism, smooth liquid dispensing is possible without puncturing the can. When not in use or during storage, the can remains unpunctured, allowing for airtight storage. This means there are no concerns about liquid odors or evaporation. ◎ Safe and Waste-Free with No Pulsation Since there is no pulsation during dispensing, it prevents liquid splashing and scattering onto the floor or people, ensuring safety. Additionally, it reduces liquid loss, eliminating waste. ◎ Easy to Install and Operate It can be connected simply by screwing it into a one-gallon or pail can. Operation is as easy as twisting the upper lever. After use, the lever can be rotated from top to bottom to prevent liquid drips. 《Benefits》 ● No need to puncture the can ● Smooth dispensing without pulsation ● No liquid drips after use ● Adapter is washable 《Features》 ● Designed specifically for pail cans and one-gallon cans with a mouthpiece outer diameter of 41mm ● Equipped with an air release float ● Made entirely of lightweight resin ● Easy installation

• Other pumps

No oil supply required with lubricators. Uses a non-lubricated air motor.

"Fan Series" AFD-18NL ◎ Equipped with oil-free air motor ◎ Adjustable angle ◎ Desktop type "Benefits" ● Long-lasting motor capable of continuous operation ● Can be used in explosion-proof areas as it is powered by air ● Various types and sizes available to suit the usage location ● Stepless adjustment of rotation speed by throttling the air valve ● Stable construction that is difficult to tip over ● No oil required, operates without a lubricator ● Noise reduction of approximately 5% ● Air consumption reduced by 5% * Compared to our conventional products "Features" ● Oscillating function ● Equipped with oil-free air motor ● Stable construction that is difficult to tip over ● Adjustable angle "Applications" ● Heatstroke prevention ● Efficiency improvement in drying operations ● Air circulation in high-temperature areas and drying rooms ● Usable in high temperature and humidity (Temperature: 0-60 degrees Celsius) * Please consult separately for other environmental conditions "Field" Not only for factories such as chemical plants, painting factories, automotive transport ships, and shipyards, but also for various applications such as tunnel construction, ventilation in LP gas and underground tank stands, and installation in manholes on ships and decks.

• Ventilation and Exhaust

No oil refilling is required with lubricators. Equipped with a maintenance-free air motor.

"Fan Series" AFK-18NL ◎ Equipped with a non-lubricated air motor ◎ Adjustable angle ◎ Wall-mounted "Benefits" ● Long-lasting motor capable of continuous operation ● Can be used in explosion-proof areas due to air as the power source ● Various models and sizes to choose from based on usage location ● Stepless adjustment of rotation speed by throttling the air valve ● Stable construction that is difficult to tip over ● No oil required, no lubricator needed ● Approximately 5% reduction in noise ● 5% reduction in air consumption * Compared to our conventional products "Features" ● Oscillating function ● Equipped with a non-lubricated air motor ● Stable construction that is difficult to tip over ● Adjustable angle "Applications" ● Heatstroke prevention ● Efficiency improvement in drying operations ● Air circulation in high-temperature areas and drying rooms ● Usable in high-temperature and high-humidity environments (Temperature: 0-60 degrees Celsius) * Please consult separately for other environmental conditions "Field" Not only for factories such as chemical plants, painting factories, automotive transport ships, and shipyards, but also for various applications such as tunnel construction, ventilation in underground LP gas tanks, as a replacement for explosion-proof fans, and installation in manholes on ships and decks.

• Ventilation and Exhaust

No oil refilling required with lubricators. Uses a non-lubricated air motor.

"Fan Series" AFF-18NL ◎ Equipped with oil-free air motor ◎ Adjustable angle ◎ Floor type "Benefits" ● Long-life motor capable of continuous operation ● Can be used in explosion-proof areas due to air as the power source ● Various types and sizes available to match the usage location ● Stepless adjustment of rotation speed using air valve throttling ● Stable construction that is difficult to tip over ● No oil required without a lubricator ● Approximately 5% reduction in noise ● 5% reduction in air consumption * Compared to our conventional products "Features" ● Oscillating function included ● Equipped with oil-free air motor ● Stable construction that is difficult to tip over ● Adjustable angle "Applications" ● Heat stroke prevention ● Efficiency improvement in drying operations ● Air circulation in high-temperature areas and drying rooms ● Usable in high temperature and humidity (Temperature: 0-60 degrees (°C)) * Please consult separately for other environmental conditions "Field" Not only for factories such as chemical plants, painting factories, automotive transport ships, and shipyards, but also for various applications such as tunnel construction, ventilation for underground LP gas tanks, and installation in manholes on ships and decks.

• Ventilation and Exhaust

No oil supply required with lubricators. Uses a non-lubricated air motor.

"Fan Series" AFG-24NL ◎ Equipped with a non-lubricated air motor ◎ Adjustable angle ◎ Large 24-inch stand type "Benefits" ● Long-lasting motor capable of continuous operation ● Can be used in explosion-proof areas due to air as the power source ● Models and sizes can be selected according to the usage location ● Stepless adjustment of rotation speed with air valve throttling ● Stable construction, difficult to topple ● No oil required, no lubricator needed ● Approximately 5% reduction in noise ● 5% reduction in air consumption * Compared to our conventional products "Features" ● Oscillating function included ● Equipped with a non-lubricated air motor ● Stable construction, difficult to topple ● Adjustable angle "Applications" ● Heatstroke prevention ● Efficiency improvement in drying operations ● Usable in high temperature and humidity (Temperature: 0-60 degrees (°C)) * Please consult separately for other environmental conditions "Field" Not only for factories such as chemical plants, painting factories, automobile transport ships, and shipyards, but also for various applications such as tunnel construction, ventilation for LP gas and underground tank areas, and installation in manholes on ships and decks.

• Ventilation and Exhaust

No oil supply required with lubricators. Equipped with a maintenance-free air motor.

"Fan Series" AFG-18NL ◎ Equipped with a non-oil air motor ◎ Adjustable angle "Benefits" ● Long-lasting motor capable of continuous operation ● Can be used in explosion-proof areas due to air as the power source ● Various models and sizes to choose from according to the usage location ● Stepless adjustment of rotation speed using the air valve throttle ● Stable construction that is difficult to topple ● No oil required, no lubricator needed ● Approximately 5% reduction in noise ● 5% reduction in air consumption * Compared to our conventional products "Features" ● Oscillating function included ● Equipped with a non-oil air motor ● Stable construction that is difficult to topple ● Adjustable angle "Applications" ● Heatstroke prevention ● Efficiency improvement in drying operations ● Air circulation in high-temperature areas and drying rooms ● Usable in high temperature and humidity (Temperature: 0 to 60 degrees Celsius) * Please consult separately for other environmental conditions "Field" Not only for factories such as chemical plants, painting factories, automobile transport ships, and shipyards, but also for various applications such as tunnel construction, ventilation for underground LP gas tanks, as a replacement for explosion-proof fans, and installation in manholes on ships and decks.

• air conditioning

No oil refilling required with lubricators; equipped with a maintenance-free air motor for powerful performance! Speedy ventilation!

"Oil-Free Air Axial Flow Fan and Blower Series" AFR-08NL/AFR-12NL ◎ Equipped with an oil-free air motor Can be used without oil and without a lubricator. It features a long-lasting motor capable of continuous operation, suitable for use in explosion-proof areas. ◎ An essential item for explosion-proof and heat hazard areas! Ventilation for infection control! Because it is air motor-driven... Point 1: Lightweight! Up to 1/4 the weight of electric pressure-resistant explosion-proof blowers (compared to other manufacturers' 12-inch model axial flow fans weighing 25.5 to 37.5 kg) Point 2: Safe and secure without using power! Point 3: Fewer failures! Can be used as a circulator. 《Applications》 ● Heatstroke prevention ● Infection control measures for COVID-19 and other diseases ● Efficiency improvement for drying operations ● Air circulation in high-temperature areas and drying rooms ● Usable in high-temperature and high-humidity environments (Temperature: 5-40°C) *Please consult separately for other environmental conditions 《Field Use》 Not only for factories such as chemical plants, painting factories, automobile transport ships, and shipyards, but also for various applications such as tunnel construction, ventilation for underground LP gas tanks, replacing explosion-proof fans, and installation in manholes on ships and decks.

• Ventilation and Exhaust

To manage usage so that we can know who supplied how much. The convenience of being able to take out only the necessary amount, like a stand.

**SSD-25Ad Series** SSD-25Ad (for AdBlue) ◎ PSE (Electrical Appliance and Material Safety Law) compliant product ◎ Acquired AdBlue license in 2011 Aqua System is the only pump equipment manufacturer in Japan certified by the German Association of the Automotive Industry. As the market gradually expands from trucks and buses to construction machinery and agricultural machinery, and as needs change, we are currently developing and importing AdBlue products suited to Japan in response to customer feedback. **Benefits** ● Manage usage amounts ● Set extraction amounts ● Automatic stop when full **Features** ● Power supply is AC100V ● Authentication via a key or keypad (authentication key is optional) ● Power ON/OFF detection with nozzle storage ● Data can be output to a PC (requires dedicated software and manager key as an option)

• Other pumps

Easily dispense AdBlue from an IBC container with a supply tank located at a high position.

"IBC Series" IBC-MASTER (for AdBlue) IBC-MASTER-K24 (for AdBlue) IBC-PRO100 (for AdBlue) IBC-BASIC100 (for AdBlue) ◎ PSE (Electrical Appliance and Material Safety Law) compliant products ◎ Acquired AdBlue license in 2011 Aqua System is the only pump equipment manufacturer in Japan certified by the German Association of the Automotive Industry. As the market gradually expands from trucks and buses to construction machinery and agricultural machinery, and as needs change, we are currently developing and importing AdBlue products suited to Japan in response to customer feedback.

• Other pumps

The supply tank is located at a high position, allowing AdBlue in the IBC container to be easily dispensed from the bottom of the IBC container by its own weight.

Product Image Description 1. Self-weight drop hose set JEH series representative image 2. 50A Coupler type JEH-AK (2-port cap KK-2V + liquid extraction hose set A 50A coupler type JEH-A) 3. Screw type JEH-BK (2-port cap KK-2V + liquid extraction hose set B screw type JEH-B) 4. Screw type JEH-BKA (2-port cap KK-2V + liquid extraction hose set B screw type JEH-BA) ◎ PSE (Electrical Appliance and Material Safety Law) compliant product ◎ Acquired AdBlue license in 2011 《Benefits》 ● Cost-effective and expense-reducing ● Easy to portion with manual gun nozzle 《Features》 ● For IBC containers ● The top of the container is equipped with a 2-port cap with a connection coupler for refilling and air venting ● The lower connection port of the container supports two types: 50A coupler type and screw cap type

• Other pumps

Convenient for supplying AdBlue in small quantities to cargo vehicles, construction machinery, agricultural machinery, and large vehicles.

**D-SET Series** D-SET100 (for AdBlue) ◎ PSE (Electrical Appliance and Material Safety Law) compliant product ◎ Acquired AdBlue license in 2011 Aqua System is the only pump equipment manufacturer in Japan certified by the German Association of the Automotive Industry. As the market gradually expands from trucks and buses to construction machinery and agricultural machinery, and as needs change, we are currently developing and importing AdBlue products suited to Japan in response to customer feedback. ◎ Dedicated pump that can be attached to a plastic drum **Benefits** ● Ensures safety during movement and refueling by securely fixing to the top of the drum ● Comes with a manual gun nozzle for easy dispensing **Features** ● For 200L plastic drums (plastic drum sold separately) ● Power supply: AC100V ● Diaphragm pump type ● Maximum discharge head: 6m, maximum discharge rate: 22L/min ● Built-in thermal protector for safety and peace of mind

• Other pumps

Water absorption of 6m (2.5m when dry) with a performance of 15m in height. Made of aluminum, lightweight, and equipped with a manual water supply pump.

"HWA Pump Series" - HWA-0 (Brass for key parts / for water) - HWA-2 (Brass for key parts / for water) ◎ For emergency water supply pump ◎ Liquid transfer ◎ Lightweight and compact 《Advantages》 ● Performance of 6m suction (2.5m when dry) and 15m discharge ● Trusted and proven performance used in ships for many years ● Usable in locations without power supply 《Features》 ● Lightweight water wing pump ● Flange is screw type ● Body is made of aluminum casting

• Other pumps

Suction depth of 6m (2.5m when dry) and a lift height of 15m. Usable in locations without power supply.

"King Wing Pump Series" - FC-CAC 15A to 50A (Brass for essential parts / for oil) ◎ For emergency water supply pumps ◎ Liquid transfer 《Benefits》 ● Performance of 6m suction (2.5m when dry) and 15m discharge ● Trusted and proven performance used in ships for many years ● Usable in locations without power supply 《Features》 ● Screw-type phase flange included ● Essential parts made of brass only

• Other pumps

Pulsation-free discharge during carrier movement. Due to high pressure, injection and spraying are also possible.

《APP-C Series》 APP-C-AL (for oil) APP-C-SUS (for solvents) ◎ Compatible with different diameter cans, including pails and drums ◎ Suitable for high-viscosity liquids ◎ Efficient liquid discharge without waste 《Benefits》 ● For high-viscosity liquids (below 5,000 cP) ● Minimal residual liquid, no pulsation ● Can transfer to high places or long distances under high pressure 《Features》 ● Sealed pressurized, discharge-only system ● Entire pail or drum is pressurized ● Continuous operation possible ● Lifting capacity of 30m ● Usable with air compressors of 1 horsepower (0.75 kW) or more

• Other pumps

Quickly transfer low-viscosity liquids.

"MH Series" MH21N-V (for solvents) MH316M-V (for solvents) ◎ Air-driven ◎ Two types: resin and stainless steel "Benefits" ● Safely transfers highly flammable liquids ● Transfers approximately 20L in about 1 minute ● Capable of transferring to high places ● Usable with poly cans and one-gallon cans "Features" ● Equipped with a ball valve ● Two types: stainless steel and resin *Please be sure to use an air filter and lubricator.

• Other pumps

Quickly transfer low-viscosity liquids.

"MH Series" MH21N-V (for solvents) MH316M-V (for solvents) ◎ Electric 100V ◎ Two types: plastic and stainless steel "Benefits" ● Usable anywhere with a 100V power supply ● Transfers approximately 20L in about 1 minute ● Capable of transferring to high places ● Usable with plastic cans and one-gallon cans "Features" ● With ball valve ● Two types: stainless steel and plastic

• Other pumps

Easily portion high-viscosity liquids from pails or one-gallon cans.

"P-S Series" P-S (for oil) P-SX (for solvents) P-SXT (for solvents) ◎ Manual pump that does not require a power source ◎ Compatible with high-viscosity liquids "Benefits" ● No power supply needed ● For high-viscosity liquids (up to 10,000 cP) ● Can dispense oils that become hard in winter ● SUS models are compatible with various solvents (P-SX, P-SXT) ● Very useful in emergencies and disasters "Features" ● For 41mm outer diameter of pails and one-gallon cans (40mm adapter included as standard) *Optional 50mm adapter also available ● Continuous pumping is possible ● Operates with an up-and-down piston mechanism that dispenses when pulled up *For high-viscosity liquids, please pull the handle up slowly.

• Other pumps

Transfer and portioning of kerosene and light oil contained in tanks and containers.

"ERF Series" ERF-20B (for oil) ◎ Hand-cranked pump that requires no power source ◎ Widely usable from household drums to factories "Benefits" ● Easy operation by simply turning the handle ● Possible to connect hoses at both ends ● No power supply needed ● Can be used with A heavy oil and low viscosity oil (below 500 cP) ● Very useful in emergencies and disasters "Features" ● Continuous pumping is possible ● Threaded at both ends (Rc3/4) ● Comes with a base * A version without a base is available as an option.

• Other pumps

A convenient system that combines a pump and a flow meter. The long-awaited flow meter integrated drum pump.

"CUBE Series" CUBE-56T (for kerosene and light oil / tabletop) CUBE-56K (for kerosene and light oil / wall-mounted) CUBE-56S (for kerosene and light oil / stand) ◎ Measured refueling for kerosene and light oil ◎ Pump and flow meter in one box 《Benefits》 ● The amount taken out is visible at a glance ● Usage can be managed ● No worries about overflow with automatic stop when the container is full ● Continuous operation is possible 《Features》 ● Choose from three types: tabletop (T), wall-mounted (K), and stand (S) ● Power supply 100V ● Flow meter and auto-stop gun are standard equipment ● The pump's power automatically turns off when the gun nozzle is stored

• Other pumps

A convenient system that combines a pump and a flow meter. The long-awaited flow meter integrated drum pump.

"CUBE Series" CUBE-70K (for kerosene and light oil / wall-mounted) ◎ Measured refueling for kerosene and light oil ◎ Pump and flow meter in one box 《Benefits》 ● Maximum discharge rate of 70L per minute ● Easy to see the amount dispensed at a glance ● Manage usage effectively ● No worries about overflow with automatic stop when the container is full ● Continuous operation possible 《Features》 ● Power supply 100V ● Flow meter and auto-stop gun included as standard ● Pump power automatically turns off when the gun nozzle is stored

• Flow Meter

Just turn on the switch for easy use! A pump perfect for transferring kerosene and light oil!

"FA Series" FA-100ATN (for kerosene and light oil / with auto-stop gun) FA-100K24 (for kerosene and light oil / with flow meter) FA-100ATNK24 (for kerosene and light oil / with auto-stop gun and flow meter) "Benefits" ● Koshin FA-100 ● Available with flow meter and auto-stop gun, suitable for various applications "Features" ● Dedicated for JIS standard 200L closed drums (large cap G2) ● 30-minute rated ● Convenient drum pump for home use with AC-100V power supply ● Equipped with relief valve

• Other pumps

High flow rate, high lift pressure-resistant explosion-proof motor pump. For the transfer and dispensing of flammable liquids.

**EMM Series** EMM-25PP (for solvents) EMM-25SUS (for solvents) **Benefits** ● High discharge volume and high lift pressure-resistant explosion-proof motor pump ● Liquid transfer and small packaging in fire hazard areas ● High performance with 40L per minute and a lift height of 8m ● Suitable for transferring and small packaging of gasoline (EMM-25SUS) **Features** ● Equipped with pressure-resistant explosion-proof motor (d2G3) ● For low viscosity liquids (below 50cp) *Note: The outlet is not explosion-proof.*

• Other pumps

A pump suitable for transferring liquids with a viscosity of 20,000 cP or less! A high-lift pump with a discharge height of 50m (equivalent to ISO 1,000).

◎Explosion-proof design that does not use electricity ◎Compatible with high-viscosity liquids ◎Can be used without sealing the drum ◎Powerful discharge 《Benefits》 ●Efficient transfer of high-viscosity liquids ●Safe transfer of flammable liquids ●Ideal for horizontal and high-lift transfer ●Continuous operation possible 《Features》 ●Designed specifically for JIS standard 200L closed drums (large plug G2) ●Maximum lifting capacity of 50m ●Piston-type pump (with pulsation)

• Other pumps

Pump suitable for transferring liquids with a viscosity of 20,000 cP or less! High-lift pump with a discharge height of 50m (equivalent to ISO 1,000).

◎Explosion-proof design that does not use electricity ◎Compatible with high-viscosity liquids ◎Can be used without sealing the drum ◎Powerful discharge 《Benefits》 ●Efficient transfer of high-viscosity liquids ●Safe transfer of flammable liquids ●Ideal for horizontal and high-lift transfer ●Continuous operation possible 《Features》 ●Designed specifically for JIS standard 200L closed drums (large plug G2) ●Maximum lifting capacity of 50m ●Piston-type pump (with pulsation)

• Other pumps

[For Solvents/Ball Valve with Gun Nozzle] For transferring alkaline solvents in areas where open flames are prohibited! An air-operated chemical drum pump designed with a focus on reasonable pricing.

**CHD Series** CHD-20AHP (For solvents) CHD-20AHPV (For solvents / with ball valve) CHD-20AHPN (For solvents / with gun nozzle) **Advantages** ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Safe division of flammable liquids ● Motor part can be replaced **Features** ● Compliant with PSE (Product Safety of Electrical Appliances and Materials) for safety and security ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● Air-operated, eliminating concerns about electric leakage ● Air motor type with high discharge volume, non-pulsating ● Designed exclusively for discharge **Replacement of Motor Head** The head part (motor part) can be easily detached and replaced, allowing the air motor type to be switched to an electric type. 1. Remove the four screws connecting the motor and pipe (pump part) with a screwdriver. 2. Reassemble in the same way to complete the replacement.

• Other pumps

Ideal for transferring liquids from oil drums! Switching between discharge and suction is easy with just one lever.

◎Explosion-proof design that does not use electricity ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate 《Advantages》 ●Dual-purpose for suction and discharge ●Minimal residual liquid (approximately 200cc), no waste in discharge ●Safe transfer of volatile and flammable liquids ●Cost-effective with low failure rates, reducing expenses ●Low air consumption, energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Easy adapter installation (bag nut type) 《Features》 ●Designed specifically for JIS standard 200L closed drums (large cap G2) ●Equipped with an anti-static grounding wire *only for G and AS ●Built-in float ball for leak prevention function

• Other pumps

Ideal for transferring liquids from drums for kerosene, light oil, and gasoline! Switching between discharge and suction is easy with just one lever.

◎Explosion-proof design that does not use electricity ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate 《Advantages》 ●Dual-use for suction and discharge ●Minimal residual liquid (approximately 200cc), efficient discharge ●Safe transfer of volatile and flammable liquids ●Cost-effective with low failure rates, reducing expenses ●Low air consumption, energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Easy adapter installation (bag nut type) 《Features》 ●Designed specifically for JIS standard 200L closed drums (large cap G2) ●Includes grounding wire for static electricity prevention *Only for G and AS ●Built-in float ball for leak prevention function

• Other pumps

Ideal for transferring liquids from solvent drums! Switching between discharge and suction is easy with just one lever.

◎Explosion-proof design that does not use electricity ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate 《Advantages》 ●Dual function for suction and discharge ●Minimal residual liquid (approximately 200cc), no waste in discharge ●Safe transfer of volatile and flammable liquids ●Cost-effective with low failure rates, reducing expenses ●Low air consumption, energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Easy adapter installation (bag nut type) 《Features》 ●Designed specifically for JIS standard 200L closed drums (large cap G2) ●Includes grounding wire for static electricity prevention *Only for G and AS ●Built-in float ball for leak prevention function

• Other pumps

Collecting cutting fluids, waste oil, and solvents such as IPA, methanol, and toluene in drums.

◎Explosion-proof specification that does not use electricity ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate 《Advantages》 ●Safely suction volatile and flammable liquids ●Cost-effective with low failure rates, reducing expenses ●Low air consumption, energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Automatic stop when full ●Easy adapter installation (bag nut type) 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Sealed negative pressure type for suction only, discharge not possible ●Equipped with an anti-static grounding wire *Only for G and AS ●Built-in float ball for leak prevention 《Suction Mechanism》 1. Connect compressor air (air pressure 0.4 to 0.6 MPa) 2. Discharge externally from the ejector without entering the tank 3. Negative pressure is generated at the ejector, expelling air from the tank 4. The tank becomes negative pressure and sucks in external air 5. Liquid is suctioned from the suction nozzle 6. When the liquid is full, the float ball blocks the air discharge port, stopping suction

• Other pumps

Collecting cutting fluids, waste oil, and solvents such as kerosene, light oil, gasoline, IPA, methanol, and toluene in drums.

◎Explosion-proof design that does not use electricity ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate 《Advantages》 ●Safely suction volatile and flammable liquids ●Cost-effective with low failure rates, reducing expenses ●Low air consumption, energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Automatic stop when full ●Easy adapter installation (bag nut type) 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Sealed negative pressure type for suction only, not for discharge ●Equipped with an anti-static grounding wire (for G and AS only) ●Built-in float ball for leak prevention 《Suction Mechanism》 1. Connect compressor air (air pressure 0.4 to 0.6 MPa) 2. Discharge outside from the ejector without entering the tank 3. Negative pressure is generated at the ejector, expelling air from the tank 4. The tank becomes negative pressure, drawing in external air 5. Liquid is suctioned through the suction nozzle 6. When the liquid is full, the float ball blocks the air discharge port, stopping suction

• Other pumps

Collecting cutting fluids, waste oil, and solvents such as IPA, methanol, and toluene in drums.

◎Explosion-proof specification that does not use electricity ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate 《Benefits》 ●Safely suction volatile and flammable liquids ●Cost-effective with low failure rates, reducing expenses ●Low air consumption, energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Automatic stop when full ●Easy adapter installation (bag nut type) 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Sealed negative pressure type for drum cans, suction only, no discharge ●Equipped with an anti-static grounding wire (only for G and AS) ●Built-in float ball for leak prevention 《Suction Mechanism》 1. Connect compressor air (air pressure 0.4 to 0.6 MPa) 2. Discharge outside from the ejector without entering the tank 3. Negative pressure is generated at the ejector, expelling air from the tank 4. The tank becomes negative pressure and draws in external air 5. Liquid is suctioned from the suction nozzle 6. When the liquid is full, the float ball blocks the air discharge port, stopping the suction

• Other pumps

For transferring high-viscosity liquids in large volumes for solvents, acids, and alkalis! It is a separable air pressure pump that can be disassembled for cleaning.

◎Explosion-proof design that does not use electricity ◎Double safety structure for peace of mind ◎Compatible with high-viscosity liquids ◎Can be stored sealed ◎Low failure rate ◎Can be used for both discharge and suction 《Benefits》 ●Minimal residual liquid (approximately 200cc), no waste in discharge ●Safe transfer of volatile and flammable liquids ●Quiet operation with a 1 horsepower compressor ●Low air consumption and energy-saving ●Acceptable with small amounts of foreign matter contamination ●Continuous operation possible ●Easy to clean due to a structure that allows for disassembly ●Available in sanitary-grade hygienic fittings ●Sanitary type has a proven track record in food applications (APDS-1s, 1.5s) *Does not comply with the Food Sanitation Act. 《Features》 ●Dedicated for JIS standard 200L closed drums (large cap G2) ●Sealed pressurized drum for discharge only, not for recovery ●Double pressure reduction with regulator and safety valve for peace of mind ●Pressure section (G3/4) and discharge section (G2) are separated

• Other pumps

For oil: Large capacity transfer of high-viscosity liquids; disassembly and cleaning possible.

◎Explosion-proof design that does not use electricity ◎Double safety structure for peace of mind ◎Compatible with high-viscosity liquids ◎Can be stored in a sealed manner ◎Low failure rate ◎Can be used for both discharge and suction 《Benefits》 ●Minimal residual liquid (approximately 200cc), efficient discharge ●Safe transfer of volatile and flammable liquids ●Quiet operation driven by a 1 horsepower compressor ●Low air consumption and energy-saving ●Acceptable with a small amount of foreign matter contamination ●Continuous operation possible ●Easy to clean due to a structure that allows for disassembly ●Available in sanitary-grade hygienic fittings ●Sanitary type has a proven track record in food applications (APDS-1s, 1.5s) *Does not comply with the Food Sanitation Act. 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Designed for discharge only with sealed pressurized drum, not for recovery ●Double pressure reduction with regulator and safety valve for peace of mind ●Pressure section (G3/4) and discharge section (G2) are separated

• Other pumps

[Sanitary product / Heloor joint specification] For large-volume transfer of high-viscosity liquids! It is a separable air pressure pump that can be disassembled for cleaning.

◎Explosion-proof design without electricity ◎Double safety structure for peace of mind ◎Compatible with high-viscosity liquids ◎Can be stored sealed ◎Low failure rate ◎Can be used for both discharge and suction 《Advantages》 ●Minimal residual liquid (approximately 200cc), no waste in discharge ●Safe transfer of volatile and flammable liquids ●Quiet operation with a 1 horsepower compressor ●Low air consumption and energy-efficient ●Acceptable with small amounts of foreign matter contamination ●Continuous operation possible ●Easy to clean due to a structure that allows disassembly ●Available in sanitary-grade hygienic fittings ●Sanitary type has a proven track record in food applications (APDS-1s, 1.5s) *Does not comply with the Food Sanitation Act. 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Sealed pressurized drum for discharge only, not for recovery ●Double pressure reduction with regulator and safety valve for peace of mind ●Pressure section (G3/4) and discharge section (G2) are separate

• Other pumps

For transferring high-viscosity liquids in large volumes for acids and alkalis! It is a separable air pressure pump that can be disassembled for cleaning.

◎Explosion-proof design that does not use electricity ◎Double safety structure for peace of mind ◎Compatible with high-viscosity liquids ◎Can be stored in a sealed manner ◎Low failure rate ◎Can be used for both discharge and suction 《Benefits》 ●Minimal residual liquid (approximately 200cc), efficient discharge ●Safe transfer of volatile and flammable liquids ●Quiet operation with a 1 horsepower compressor ●Low air consumption and energy-efficient ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Easy to clean due to a structure that allows for disassembly ●Available in sanitary-grade hygienic fittings ●Sanitary type has a proven track record in food applications (APDS-1s, 1.5s) *Does not comply with the Food Sanitation Act. 《Features》 ●Dedicated to JIS standard 200L closed drums (large plug G2) ●Sealed pressurized drum for discharge only, not for recovery ●Double pressure reduction with a regulator and safety valve for peace of mind ●Pressure section (G3/4) and discharge section (G2) are separated

• Other pumps

A pump that uses compressed air to utilize internal pressure for transfer, equipped with an oil gun nozzle! Minimizes residual liquid, energy-saving, and suitable for safely dispensing highly flammable liquids in small quantities.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-efficient ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated for JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) ≪Mechanism of Air Pressure Pump≫ This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and inhale liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, because it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination is not acceptable.

• Other pumps

A pump that uses compressed air to transfer liquids such as kerosene, light oil, and gasoline! It minimizes residual liquid, is energy-efficient, and safely dispenses highly flammable liquids in small quantities.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-efficient ● Acceptable with small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated for JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) ≪Mechanism of Air Pressure Pump≫ This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, being air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination is not acceptable.

• Other pumps

A pump that uses compressed air to transfer liquids by utilizing internal pressure! It minimizes residual liquid, is energy-efficient, and is suitable for safely dispensing highly flammable liquids.

◎Explosion-proof design that does not use electricity ◎Double safety structure for peace of mind ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate ◎Efficient liquid discharge without waste ◎Discharge method can also be selected 《Advantages》 ●Minimal residual liquid (about 200cc), can discharge without waste ●Safe transfer of volatile and flammable liquids ●Quiet operation with a 1 horsepower compressor ●Low air consumption and energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible 《Features》 ●Designed specifically for JIS standard 200L closed drums (large cap G2) ●Sealed pressurized drum for discharge only, not for recovery ●Double pressure reduction with regulator and safety valve for added safety ●Equipped with an anti-static grounding wire (only for G, AS, SUS types) 《Mechanism of Air Pressure Pump》 This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, being air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination not allowed.

• Other pumps

A pump that uses compressed air to transfer liquids by utilizing internal pressure! It minimizes residual liquid, is energy-efficient, and is suitable for safely dispensing highly flammable liquids in small quantities.

◎Explosion-proof design that does not use electricity ◎Double safety structure for peace of mind ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate ◎Efficient liquid discharge ◎Discharge method can also be selected 《Benefits》 ●Minimal residual liquid (approximately 200cc), capable of efficient discharge ●Safe transfer of volatile and flammable liquids ●Quiet operation with a 1 horsepower compressor ●Low air consumption and energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Designed for discharge only with sealed pressurized drums, not for recovery ●Double pressure reduction with a regulator and safety valve for added safety ●Equipped with an anti-static grounding wire (only for G, AS, SUS types) 《Mechanism of the Air Pressure Pump》 This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, being air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination not allowed.

• Other pumps

A pump that uses internal pressure with compressed air for transferring liquids, equipped with a solvent nozzle! Minimizes residual liquid, energy-efficient, and suitable for safely dispensing highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected 《Advantages》 ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible 《Features》 ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) 《Air Pressure Pump Mechanism》 This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, because it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination is not acceptable.

• Other pumps

Pump for kerosene, light oil, and gasoline with a gun nozzle! Utilizes internal pressure with compressed air for transfer! Minimizes residual liquid, energy-saving, and safely allows for portioning of highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated for JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for peace of mind ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) ≪Mechanism of Air Pressure Pump≫ This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, because it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination is not acceptable.

• Other pumps

A pump that uses compressed air to transfer liquids by utilizing internal pressure! Minimizes residual liquid, energy-efficient, and suitable for safely dispensing highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-efficient ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated for JIS standard 200L closed drums (large cap G2) ● Sealed pressurized type for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) ≪Mechanism of Air Pressure Pump≫ This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. There are no obstacles in the flow path, so it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, since it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination not allowed.

• Other pumps

Chemical plants, aircraft factories, shipyards, painting booths. For ventilation, air supply, and cooling of machinery in plants and explosion-proof areas, etc.

"Fan Series" AFR-18 (Fan diameter 450mm) [Discontinued] AFR-24 (Fan diameter 600mm) AFR-08NL (Fan diameter 200mm) AFR-12NL (Fan diameter 300mm) AFR-18NL (Fan diameter 450mm) ◎ Air motor factory fan that does not use electricity ◎ Standard equipped with air filter and lubricator ◎ Easy to operate "Benefits" ● Long-lasting motor capable of continuous operation ● Can be used in explosion-proof areas since the power source is air ● Models and sizes can be selected according to the usage location ● Stepless adjustment of rotation speed by throttling the air valve ● Stable construction that is difficult to topple "Features" ● Standard equipped with air filter and lubricator * Please use No. 32 lubricating oil. ● Duct hose can be attached as an option "Applications" ● Heatstroke prevention ● Efficiency improvement for drying work ● Ventilation and air blowing in narrow spaces such as manholes and tanks ● Connecting ducts for ventilation and air blowing in manholes ● Exhaust gas discharge for construction vehicles and heavy machinery ● Air circulation in high-temperature areas and drying rooms

• Other pumps

Ideal for transferring fuel to heavy machinery and agricultural equipment! Fuel can be quickly and safely supplied at the work site!

Italian-made "PIUSI" battery-operated pump series For construction machinery, delivery times, and maintenance of transport vehicles For refueling kerosene and diesel! Available in 12V and 24V specifications. The PIUSI BOX PRO is stored in a case, protecting the pump from dirt and grime. It is ideal for transferring fuel to heavy machinery and agricultural equipment. Fuel can be quickly and safely replenished on the job site. ■CARRY3000-12/24V ■PIUSIBOX BASIC-12V/24V ■PIUSIBOX PRO-12/24V

• Other pumps

Hand-cranked pump that performs exceptionally well even in emergencies. For transferring low-viscosity liquids and gasoline.

"HR Series" HR-25G (For Oil and Gasoline) ◎ Hand-cranked pump that requires no power source ◎ Usable without sealing the drum ◎ Widely usable from household drums to factories ◎ Suction pipe can be cut 《Benefits》 ● Easy operation by simply turning the handle ● No power supply needed ● Can be used with A heavy oil and low viscosity oil (below 500 cP) ● Allows for small portioning of gasoline ● Greatly useful in emergencies and disasters 《Features》 ● Continuous pumping is possible ● Securely fixed to the drum with an adapter ● Comes with 40 mesh ● Equipped with a magnet ground wire for static electricity prevention

• others

The air device you have can be operated at your feet. Foot switch for retrofitting, simply step on it to turn it on and off.

**Merits** ● Operable while standing ● Easy ON/OFF with just a foot pedal ● No unnecessary movements, no wasted air consumption ● Both hands are free, increasing work efficiency **Applications** ● Increased work efficiency ● Reduction in air consumption ● Reduction in labor hours ● Safe and efficient two-handed operation ● Line improvement

• Other pumps

The air device you have can be operated "at hand."

**Merits** - No hassle of manual valve operation upon return - Can be turned ON only when needed - Does not waste air - Easy to operate with one hand **Applications** - Increased work efficiency - Reduction in air consumption - Reduction in labor hours - Safe and efficient two-handed operation - Line improvement

• Other pumps

Oil-free air motor factory fan AFF-18NL AFG-18NL! Usable in explosion-proof areas! Air blowing, cooling, ventilation, and heatstroke prevention in fire hazard areas!

Oil-Free Air Motor Factory Fan AFF-18NL AFG-18NL No hassle of oil refilling <Recommended Points> 1. No need for lubricator oil! Equipped with oil-free air motor 2. Quiet! Approximately 5% noise reduction 3. Energy-saving! Approximately 5% reduction in air consumption *Compared to our conventional products <Can be used as a circulator> The AFF-18NL has about 70 degrees of vertical oscillation, while the AFG-18NL can move about 90 degrees vertically and about 70 degrees horizontally 【Many other factory fans (blowers) available!】 Stand Type (AFG Series) Standard oscillation function With a left-right oscillation function of 90 degrees, it can send air over a wide area. Table Type (AFD Series) Can be placed in any available space! Extremely user-friendly table type factory fan! Axial Flow Type (AFR Series) Ideal for ventilation and blowing in narrow spaces like manholes and tanks! Recommended for areas where ventilation is difficult. Wall-Mounted Type (AFW Series) Convenient due to wall mounting As a wall-mounted factory fan, it can be used without obstructing your feet or hands.

• others

Solve the problems of tank cleaning for machine tools and the recovery of cutting fluids and chips! A document summarizing product features is available.

<Are you facing any of these concerns regarding cleaning around machine tools?> - Tank cleaning is costly - Cleaning takes too long, resulting in overtime - Cleaning is done on holidays to avoid stopping the machine - Using an electric cleaner in a site where electricity is not wanted Our 'Filtration Cleaner/Air Vacuum Cleaner' can solve these issues just by connecting it to a compressor! 'Circulating Tank Cleaning Filtration Cleaner' - Tank cleaning is possible even while the machine is running - Just connect the air to handle everything from collection to discharge 'Air-Powered Tank Cleaning Filtration Cleaner' - Can be used simply by placing it on an existing open drum and connecting the air hose - Collects all cutting fluid and chips first, then discharges only clean cutting fluid 'Air Vacuum Cleaner' - Durable and maintenance-free. Can be washed thoroughly - Can suck up debris, chips, and oil, suitable for both dry and wet use

• Other machine tools

Solve the problems of tank cleaning for work machines and the recovery of cutting fluids and chips! A document summarizing product features is available.

Are you facing any of these issues with cleaning around machine tools? - High costs for tank cleaning - Cleaning takes too long, resulting in overtime - Cleaning on holidays due to stopping machine tools - Using electric cleaners in areas where electricity is not wanted Our 'Filtration Cleaner/Air Vacuum Cleaner' can solve these problems just by connecting it to compressed air! 'Circulating Tank Cleaning Filtration Cleaner' - Can clean tanks while machines are running - Just connect the air to handle collection and discharge 'Air-Powered Tank Cleaning Filtration Cleaner' - Can be used by placing it on existing open drums and simply connecting the air hose - Collects all cutting fluid and chips first, then discharges only clean cutting fluid 'Air Vacuum Cleaner' - Durable, maintenance-free, and can be washed thoroughly - Can suck up debris, chips, and oil; suitable for both wet and dry use ● For more details, please download the PDF and take a look.

• Other machine tools

Solve the problems of tank cleaning for machine tools and the recovery of cutting fluids and chips! A document summarizing product features is available.

<Do you have any of these concerns regarding cleaning around machine tools?> - Cleaning tanks is costly - Cleaning takes too long, resulting in overtime - Cleaning is done on holidays to avoid stopping the machine - Using electric cleaners in areas where electricity is not wanted Our 'Filtration Cleaner/Air Vacuum Cleaner' can solve these issues by simply connecting it to compressed air! 'Circulating Tank Cleaning Filtration Cleaner' - Can clean tanks while the machine is operating - Just connect the air to handle everything from collection to discharge 'Air-Powered Tank Cleaning Filtration Cleaner' - Can be used by placing it on existing open drums and simply connecting the air hose - Collects all cutting fluid and chips first, then discharges only clean cutting fluid 'Air Vacuum Cleaner' - Durable, maintenance-free, and can be washed thoroughly - Can suck up dust, chips, and oil; suitable for both dry and wet use ● For more details, please download the PDF and take a look.

• Other machine tools

Reduce downtime by cleaning the cutting fluid tank! Easy collection and disposal. Continuous operation is OK. J-F series, APDQO series.

We manufacture and sell the "Air-Powered Tank Cleaning and Filtration Cleaner" to reduce the burden of daily cleaning of cutting fluid tanks. This product is recommended for those who face issues such as "machines stop during cleaning, leading to inefficiency," "difficulties in collecting and disposing of cutting fluid," "time and costs associated with tank cleaning," and "frequent breakdowns of electric vacuum cleaners." 【Product Lineup】 Circulation work without stopping the machine! Separates cutting fluid and chips! ■ Air-Powered Circulation Filtration Cleaner "J-F Series" - Separates cutting fluid and chips without stopping the machine - No risk of electric leakage during continuous operation - Easy disposal of chips - Filtration capacity of 60L/min < J-FS > Chip-specific SUS filter type Standard mesh < J-FF > Polishing-specific non-woven fabric filter type For aluminum, stainless steel, BC (CAC), resin, etc. Solving cleaning tasks in as little as about 5 minutes! ■ Air-Powered Tank Cleaning Filtration Cleaner "APDQO Series" - High-speed cleaner - Can be washed thoroughly - Continuous operation is possible < APDQO-FS > Chip-specific SUS filter type < APDQO-FF > Polishing-specific non-woven fabric filter type

• Other pumps

No electricity required, no hassle of oil refilling, and can be used in explosion-proof areas. Ideal for blowing, cooling, and ventilation in fire hazard zones, as well as for heatstroke prevention! *Video available.

Until now, air motors required oil lubrication, but this time we have equipped it with the "latest oil-free air motor," eliminating the hassle of oiling. Additionally, it can be used in explosion-proof areas, making it ideal for blowing, cooling, and ventilation in fire-restricted zones, as well as for heatstroke prevention. <Recommended Points> 1. No need for lubrication! Equipped with an oil-free motor. 2. Quiet! Approximately 5% noise reduction. 3. Energy-saving! Approximately 5% reduction in air consumption. 4. Further price reduction of about 30%. *Comparison with our conventional products <Can be used as a circulator> It can move approximately 90 degrees up and down and about 70 degrees left and right. *We have a wide range of lineups available to suit your needs. For more details, please download the catalog or feel free to contact us!

• others

Transporting hardened oil is a breeze! Jacket heaters that fit perfectly around containers, and more.

We offer a variety of pumps and related products that will be useful in the upcoming season when temperatures drop and oil becomes thick. We have products that help reduce frustration during liquid transfer in winter and cold regions, such as the jacket heater "HTJ Series," which warms oil in containers like pails, one-gallon cans, and drums to lower viscosity. 【Product Lineup】 - Air-driven pressure pumps - Electric high-viscosity oil pumps - Heat jackets for containers "HTJ Series"… and more *We are currently providing materials that introduce our products. Please feel free to contact us for inquiries.

• Other pumps

● The production time for casting prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly creating sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be created in a single molding process. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

This time, the ACS-5000 is available as a facial recognition terminal compatible with FaceMe Security's add-on feature "Face Terminal," enabling access control management that combines "advanced anti-spoofing features" with high-speed facial recognition powered by edge AI. ■ Main Features 1. Accelerated Authentication Processing FaceMe Security is optimized for the MediaTek Genio 700's NPU, achieving faster facial recognition processing and reduced CPU load compared to processing solely on the CPU. It ensures stable authentication without delays even during peak times such as clocking in and out, contributing to alleviating congestion. 2. Advanced "Anti-Spoofing" Optimized for the IR + RGB camera mounted on the ACS-5000, it can quickly detect fraudulent authentication using photos, videos, or 3D masks within 0.6 seconds, ensuring reliable identity verification. 3. Door Control Without Additional Equipment FaceMe Security can directly control the digital I/O of the ACS-5000, allowing for the construction of an access control management system without the need for additional equipment. This simplifies system configuration and reduces implementation costs.

This is an air leak tester for battery cases of electric vehicles (EVs). The battery case has the characteristic of being "large with a significant internal volume, and its structure may deform due to internal pressure." As a result, air leak testing generates "noise caused by its large size and capacity" and "noise caused by expansion or deformation due to internal pressurization." To mitigate this noise, this device features a newly developed smoothing function and a linear fitting correction function used in combination during measurement. Additionally, to achieve low-pressure control that is difficult to manage and to expand flow for large volumes, we provide a bypass box (CBU-600) equipped with an electro-pneumatic regulator for precise pressure control and a pressurization valve with a large effective diameter to supply high flow rates. Measurement methods: Work-Work comparison, Work-Master comparison, Fixed Master comparison Measurement pressure range: 10 kPa, 20 kPa, 50 kPa (depending on specifications) Gauge pressure sensor accuracy: ±2% F.S. Differential pressure sensor accuracy: ±0.5% F.S. Group settings: 0 to 31 groups Power supply voltage / Power consumption: AC100 to 240 V / 100 VA

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!