The hydrogen burner-equipped aluminum melting holding furnace under development has been featured in "Die Casting News."

A test furnace based on actual equipment that uses a hydrogen burner for melting and an electric heater for holding. It is possible to conduct thorough tests for decarbonization in aluminum casting sites together with our customers!

It is possible to conduct aluminum melting tests using hydrogen combustion with ingot input. Please use it to verify the quality of the molten metal and its impact on the products. The melting gas burner employs a hydrogen burner and electric heaters for retention! It is a hybrid furnace that enables carbon neutrality. By exchanging burner components, you can switch between fuel gases (hydrogen/LNG (natural gas)/LPG), allowing for adaptability based on gas supply trends. Additionally, the furnace structure has a high oxide suppression effect, which you can verify in actual operation. We are committed to solving problems in aluminum casting sites and promoting low carbonization. Please feel free to reach out to us. ~Equipment Overview~ Test Furnace: Aluminum Handheld Melting Retention Furnace (Oxide Suppression Structure) Model: SMH-150H2 Melting Capacity: 150kg/h Retention Capacity: Retention Chamber 800kg/ch *Actual effective capacity during continuous melting, specific gravity 2.4 Melting Temperature: 660–680℃ Control Accuracy: ±5℃ ~Heat Source Configuration~ Melting Burner: Hydrogen Combustion Burner 116kW x 1 unit Retention Heater: Immersion Type Electric Heater 9kW x 2 units Fuel Used: Hydrogen (city gas 13A and propane gas are also possible) Power Supply: 200V/60Hz for power, 100V for operation

• Electric furnace

The high-temperature gas burner series now includes a hydrogen combustion specification! It can be used in various industrial furnaces due to its tile top.

The combustion range is large, allowing for stable combustion even with excess air. It is a "hydrogen burner" type using hydrogen as fuel for the high-temperature gas burner "EIS burner." The tile top (castable) can accommodate temperatures up to 1200°C! It supports preheated air up to 300°C. 【Features】 □ Achieves stable combustion and low NOx performance □ Flame shape equivalent to city gas/propane combustion □ Structure with excellent maintenance characteristics □ Simple piping system with direct ignition method You can convert your existing EIS burner to hydrogen combustion by replacing parts, allowing for evaluation tests on the impact on non-heated materials (workpieces), etc. *1 Achievements with conventional gas specifications are available. The H2 model is currently under testing. *2 Piping facilities compatible with hydrogen combustion are required. Please contact us for more details and consultation.

• Drying Equipment
• Heating device
• Industrial Furnace

Contributes to improving work efficiency in aluminum casting sites for automotive parts and others. Reduces the occurrence of oxides and significantly decreases the tedious cleaning of the holding chamber. (About once every six months to a year!)

Oxide Suppression Furnace: SMH Series (Aluminum Holding Melting Furnace / Aluminum Central Melting Furnace) 【Features】 ◇ Maintains a low atmosphere temperature in the holding chamber (below 800°C) and keeps the residual oxygen concentration below 1%, utilizing the protective effect of the aluminum oxide film to slow down the progression of oxidation with a new furnace structure. ◇ Equipped with a newly developed flat frame burner to prevent agitation of the molten surface without directly applying flame to the molten metal in the holding chamber, and incorporates a heat exchanger utilizing exhaust gas for energy savings (a hybrid version using electric heaters is also available). ◇ To significantly enhance forced convection heat transfer from the matching of the furnace structure, it is equipped with a newly developed melting burner that considers flame length, flame diameter, and flame speed. 【Expected Effects】 (Compared to our conventional furnaces) By using the oxide suppression furnace... ○ Reduction in the frequency of cleaning the holding chamber (proven to be unnecessary for up to 1 year) ○ Elimination of flux treatment (may be performed in the melting chamber depending on the amount of dross) ○ Improvement in molten metal quality (reduction of hydrogen gas and inclusions in the molten metal) ○ Increased yield due to reduction in material loss ○ Improved fuel efficiency through energy savings from waste heat recovery in the holding chamber ○ Improved working environment due to reduced furnace surface temperature

• Industrial Furnace
• Non-ferrous metals
• aluminum

2nd anniversary celebration! Approximately 100 customers attended. Experience the forefront of decarbonization technology, including hydrogen combustion gas burners.

In May 2023, we established the "Thermal Technology Research Institute," and over the past year, we have conducted numerous tests. ~ Test Equipment Overview ~ ◇ Aluminum Melting Holding Furnace This furnace allows for verification tests of "melt quality" and "melting efficiency" through hydrogen combustion melting. It is an actual machine-based aluminum melting furnace. Melting capacity: 150 kg/h Melting: Hydrogen combustion gas burner Holding: Electric heater ◇ Painting Drying Furnace (Testing Equipment) Using equipment that is comparable to actual production sites, tests can be conducted with four different heat sources. It accommodates various types of workpieces. In the fiscal year 2023, we conducted optimization tests of heat sources with approximately 20 customers. ◇ Direct Combustion Deodorization Device (On-site Testing Available) A movable demo unit that can conduct tests using actual odors at customer factories. - Treatable components: VOCs (volatile organic compounds) and various other odors. - Treatment capacity/temperature: Max. 1.0 m³N/min / 760℃ ⚪︎ Hydrogen Combustion Gas Burner As a manufacturer of industrial gas burners, we are advancing the adaptation of our existing lineup to hydrogen. The combustion observation of hydrogen gas burners has been very well received. Experience the forefront of technology development aimed at a decarbonized society.

• Heating device

In February of this year, we inquired about "paperlogic" using the Ministry of Economy, Trade and Industry's gray zone resolution system regarding the "provision of electronic contract services to the construction industry," and received a response stating that "paperlogic meets the standards related to construction contracts under the Construction Business Act Enforcement Regulations (Article 13-4, Paragraph 1, Item 1 (h) and Paragraph 2)." ◆ Accelerating DX in the Construction Industry with 'Official Approval' The construction industry faces challenges in digitizing contract operations due to the complexity of contracts, the presence of numerous stakeholders, and legal requirements and security concerns. However, due to the nature of the business, detailed contract operations occur frequently in the construction industry. Therefore, by digitizing contract operations, this sector can benefit significantly from cost reductions, such as stamp duty and labor costs, as well as shortened timeframes for contract execution. ◆ Package Plans for the Construction Industry Also Available paperlogic offers the 'paperlogic Construction Document DX Pocket' to facilitate smoother transactions between general contractors and partner companies. Please feel free to try our trial service from the "Service Application" section.

We would like to introduce the '96 Non Jacket Tubes 1.3ml Type' that we handle. These tubes are autoclavable and compatible with DMSO and vapor phase liquid nitrogen. They come with a rack lid locking feature and an anti-rotation function. Please feel free to contact us if you have any inquiries. 【Features】 ■ Rack lid locking feature ■ Anti-rotation function ■ Polypropylene ■ Autoclavable ■ DMSO compatible ■ Compatible with vapor phase liquid nitrogen *For more details, please refer to the related links or feel free to contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

■Disadvantages of Conventional Antistatic Fluororesin Coatings - Requires high-temperature firing (around 400°C) - Applicable only to metals - Limited color options - Low mechanical strength ■Features of Safron LF+ - Can be processed at low temperatures (below 100°C) - Applicable to metals and resins - Color variations available - High friction coefficient and mechanical strength - Antistatic performance is equivalent to conventional Safron For more details, please check the product site.