"OCT-equipped heating observation imaging furnace" contributes to global research! Direct observation of internal structural changes at high temperatures.

Rapid heating at approximately 50°C/sec using focused light heating method, with the possibility of rapid cooling when the heating lamp is turned off. Compatible with various atmospheres.

The "IR Series" (IR Series) of focusing heating furnaces manufactured by Yokokura Seisakusho, used by various research institutions around the world, is an IR image furnace that utilizes near-infrared focusing heating. It features a clean environmental structure that allows for ultra-fast heating and cooling. The product lineup includes the "IR-HP (6 Parabolic Radiation)," which dramatically expands the temperature distribution area compared to conventional heating furnaces with rapid heating and cooling from six directions; the "IR-QP (4 Elliptical Shared Focusing)," which offers double the temperature distribution area and rapid heating compared to conventional heating furnaces with rapid heating and cooling from four directions; and the "IR-TP (2 Elliptical Shared)," which enables microscopic observation compared to conventional heating furnaces with rapid heating and cooling from two directions. 【Main Features】 - Clean, energy-efficient, high performance - Vacuum and gas replacement + observation - High-speed heating with low power (1500°C in 30 seconds with only 4kW) - Heater uses tungsten filament with a high heating temperature of 3400K - Watt density is 10 to 20 times higher than nichrome heaters - Real-time temperature control available - Compact size For more details, please contact us or refer to the catalog.

• Electric furnace

Contributed to research on changes in the internal structure of ceramics! Direct observation of changes in internal structure at high temperatures.

The "OCT-equipped heating observation imaging furnace," which allows for direct observation of internal structural changes at high temperatures, has contributed to the study of changes in the internal structure of ceramics. It is a compact device utilizing a focused heating method and equipped with OCT (Optical Coherence Tomography) for internal observation. ◆ Key Points ◆ - Internal structure observation at high temperatures In-situ observation up to 1800°C - Understanding weight and thermal changes Clarifying the relationship between internal changes and temperature/weight changes - Excellent operability and controllability Data acquisition combining weight changes with temperature OCT is a technology that uses infrared laser light to visualize the interior of materials. It can be applied to materials such as ceramics and resins that allow infrared light to pass through. For more details, please refer to the catalog or contact us.

• Testing Equipment and Devices

It is a compactly designed high-temperature heating observation device. It can be used on your microscope or micro-scope.

The IR-TPS is a high-temperature stage for microscopes that has been developed to achieve the contradictory goals of "high functionality and low cost." In addition to the standard configuration, advanced system equipment can be built with high-quality options. It can be used for research such as material analysis and quality control under precise temperature control in air, inert gas, or vacuum environments. 【Features】 ○ Uniform high-temperature heating of the sample at a speed of up to 1500°C within 60 seconds using infrared concentration ○ Energy-saving clean heating ○ Easy maintenance For more details, please contact us or refer to the catalog.

• Analytical Equipment and Devices

Minimize work inside the glove box ◎ Screening of solid electrolyte materials / Impedance evaluation by temperature characteristics ◎ Multiple uniform, short time, and accurate test evaluation

It excels in material screening of solid electrolytes and impedance evaluation according to temperature characteristics! ▼Features▼ 1. Reproduces various heating patterns of inorganic electrolyte heating and sintering processes in a short time. - Temperature can be adjusted with an accuracy of ±1°C within a temperature range of 50°C to 1200°C. - The heating rate is also a maximum of 300°C/min, allowing for various heating patterns to be tested in a short time even from room temperature. 2. Efficient simultaneous evaluation of impedance measurements for lithium-ion conductivity (conductivity). - Structure allows for heating with electrodes attached to the top and bottom of the coin cell. - The coin cell holder is prepared for 4 slots. - Uniform heating/measuring of 4 samples simultaneously under the same conditions. - Various coin cell diameters available from Φ20 to Φ8mm. 3. Simple operation and design that prevents exposure to the atmosphere / atmosphere control. - Work inside the glove box involves only setting the samples. - Inside the quartz tube, a quartz coin cell holder is maintained, and only the coin cell is accurately heated. - The completely sealed transparent quartz tube is heated from the outside using light heating. - Gas introduction systems and atmosphere control during heating are also easy to manage. Please contact us for more details.

• Secondary Cells/Batteries
• Lithium-ion battery
• Electric furnace

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is kept to a minimum. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

What is an Air Leak Tester? An "Air Leak Tester" is a device that pressurizes the inside (or outside) of a sealed workpiece with air and determines the presence of leaks based on pressure changes. When a master with no leaks and a workpiece with leaks are pressurized, the pressure on the workpiece side decreases, creating a pressure difference between the two. By measuring this pressure difference, the presence of leaks can be determined. Generally, differential pressure air leak testing is widely used, but Fukuda also offers products that utilize direct pressure leak testing and flow meters according to the leak rate, in addition to differential pressure leak testers. Since the air leak tester uses air as the measurement medium, it incurs no running costs and is environmentally friendly.