Evaluation of brightness and color uniformity of LCD displays

By using a two-dimensional color brightness meter for measurement, it is possible to evaluate unevenness and other factors!

Our company conducts evaluations of brightness and color uniformity for emitting surfaces such as OLEDs, titled "Evaluation of Brightness and Color Uniformity of LCD Displays." In brightness measurement (using a two-dimensional photometer to measure the display surface), we compare the digital camera images of the LCD display surface with the results obtained from the brightness measurements conducted with the two-dimensional photometer. While the distribution of uniformity is difficult to discern in the digital camera images, the color scale display of the brightness distribution highlights areas with brightness uniformity issues, making it easier to understand. 【Overview of Measurement Equipment】 ■ Measurement Items: Tristimulus values (X, Y, Z), chromaticity (x, y) ■ Measurement Range: 0.01 cd/m² to 1,000,000 cd/m² ■ Effective Pixel Count: 1376 × 1024 ■ Emitting Surface Size: Approximately 15 to 115 inches ■ Installation Method/Fixtures: Vertical, horizontal, etc., adaptable to shape *For more details, please refer to the PDF document or feel free to contact us.

• Public Testing/Laboratory

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.