Notice of Participation in the Mechatronics Technology Japan (MECT) 2023 Exhibition (October 18 (Wed) - 21 (Sat))

Are you spending too much time on inventory management and stocktaking? Manage a large number of tools all at once with Gooling's inventory management system! Reduce labor costs and contribute to automation!

Are you facing issues such as 'Inventory takes an enormous amount of time,' 'Unable to access tools when needed,' 'Tool inventory management is very troublesome,' 'Can we simplify unnecessary tasks?' and 'Time spent on bookkeeping is wasted'? By implementing a management system and managing tools collectively, we can solve these problems all at once. Our inventory management system can manage various items that can be stored on shelves, not just Gühring products, regardless of the manufacturer. 【Benefits】 - Automation of outgoing and incoming inventory management and order management - Reduction of labor costs and contribution to labor-saving - Quick access using pin codes, barcodes, IC cards, etc. - Easy inventory management without the need for bookkeeping and more. *Demonstrations are available at our Nagoya factory. Please feel free to request one. *For more details, please download the PDF or contact us.

• Other cutting tools

Tool management system GTMS that digitally manages tools and consumables to reduce direct/indirect costs. Basic model 'TM326' focused on configurability.

Gühring has accumulated a track record of implementation around the world and offers a digital tool management system called 'GTMS' equipped with intelligence software packed with tool management know-how. In Europe, there have been cases of significant cost reductions of approximately 7 million yen annually, and the ripple effects extend beyond mere tool management, including proper inventory management, prevention of stockouts, and enhanced security against tool theft. The 'TM326' is a basic model suitable for manufacturing sites that prioritize configurability, featuring high security through electronic locks for entry and exit, and a wide variety of drawer types and internal partitions, allowing for customization to each individual site. 【Features】 ■ Comprehensive record-keeping for entry and exit with electronic lock unlocking ■ Drawer sizes can be selected from four different heights ■ Internal partition shapes of the drawers can be chosen from four variations ■ High-functionality LED-guided electronic flap drawers are also available as an option ■ The high-rigidity casing has a maximum load capacity of 200 kg per drawer, ensuring high durability ■ High expandability with additional units (available in two sizes) during system expansion *For more details, please refer to the PDF materials or feel free to contact us.

• Other cutting tools
• cabinet
• Other production management systems

Tool management system GTMS that digitally manages tools and consumables to reduce direct/indirect costs. High-end model 'TM526' with complete control over outgoing quantities.

Gühring has accumulated a track record of implementation around the world and offers a digital tool management system called 'GTMS' equipped with intelligence software packed with tool management know-how. In Europe, there are cases of significant cost reductions of approximately 7 million yen per year, and the ripple effects extend beyond mere tool management, including proper inventory management, prevention of stockouts, and enhanced security against tool theft. The 'TM526' is a high-end model with complete control over the number of items released. It features high security through electronic locks for entry and exit, and a system that prevents access to inventory other than the items and quantities entered, thereby increasing transparency in tool management. 【Features】 ■ Comprehensive recording of entry and exit with electronic lock unlocking ■ Drawer sizes can be selected from six different heights ■ Internal partition spacing of the drawers can be chosen from five variations ■ LED guide in the drawer lights up to prevent confusion during retrieval ■ The high-rigidity housing has a maximum load capacity of 20 kg per drawer, ensuring high durability ■ High expandability with four types of expansion units even during system expansion *For more details, please refer to the PDF materials or feel free to contact us.

• Other cutting tools
• cabinet
• Other production management systems

GTMS, which digitally manages tools and consumables to reduce direct/indirect costs related to tools. A reliable 'TM426' with a spiral mechanism for dispensing.

Gühring has accumulated a track record of implementation around the world and has developed a digital tool management system called 'GTMS' that incorporates intelligence software packed with tool management know-how. In Europe, there have been cases of significant cost reductions of approximately 7 million yen per year, and the ripple effects extend beyond mere tool management, including proper inventory management, prevention of stockouts, and enhanced security against tool theft. The 'TM426' is a spiral system unit that faithfully adheres to the first-in, first-out principle. Additionally, when operators handle items on-site, they never come into contact with inventory other than the items being dispensed, minimizing the risks of loss and theft and providing advanced security. 【Features】 ■ Complete records of inventory in and out with electronic lock access ■ Strict enforcement of the first-in, first-out principle ■ Two types of spiral units available for storing and dispensing inventory ■ Lift-equipped spiral units ensure safe dispensing without impact on items ■ Optional built-in label printer available (up to 2 units) *For more details, please refer to the PDF materials or feel free to contact us.

• Other cutting tools
• cabinet
• Other production management systems

Over 125 years of establishment, Gühring, which operates globally from Germany, has developed the 'G-Mold' ultra-hard high-precision ball end mill μ65B for molds.

GUHRING's end mill product line has been expanded with the addition of the high-precision ball end mill 'G-Mold' <μ65B>, specialized for mold processing! The tolerance for the ball radius of the high-precision type is ±0.005mm. With a minimum diameter starting from Φ0.2, it is also ideal for micro-machining. The hardness of the applicable workpiece material can be up to 65HRC. We offer a wide variety of lengths, from short to long. *For more details, please refer to the PDF document or feel free to contact us.

• End Mills

Gühring, which has been in business for over 125 years and operates globally from Germany, has developed the 'G-Mold' carbide ball end mill 65B for molds.

GUHRING's range of end mills has been expanded with the addition of the 'G-Mold' ball end mill <65B>, specialized for mold processing! It is optimal for micro-machining with a minimum diameter of Φ0.5. The hardness of the applicable workpiece material can be up to 65 HRC. The ball radius tolerance is ±0.01mm / ±0.02mm. It is available in two types: 2-flute and 4-flute. *For more details, please refer to the PDF document or feel free to contact us.

• End Mills

Gühring, which has been in business for over 125 years and operates globally from Germany, has developed the 'G-Mold' carbide ball end mill 55B for molds.

GUHRING's end mill product line has been expanded with the addition of the 'G-Mold' ball end mill <55B>, which is specialized for mold processing! It is optimal for micro machining with a minimum diameter of Φ0.5. The hardness of the applicable workpiece material can be up to 55HRC. The ball radius tolerance is ±0.01mm / ±0.02mm. It is available in two types: 2-flute and 4-flute. *For more details, please refer to the PDF document or feel free to contact us.

• End Mills

Over 120 years of establishment, Gühring, which expands globally from Germany, has developed the 'G-Mold' ultra-hard high-precision torus end mill μ65T for molds.

GUHRING's end mill product line has been expanded with the addition of the 'G-Mold' high-precision torus end mill <μ65T>, specifically designed for mold processing! The corner R tolerance for the high-precision type is ±0.005mm. With a minimum diameter of Φ0.3, it is also ideal for micro-machining. The hardness of the applicable work materials can go up to 65HRC. We offer a wide variety of lengths, from short to long. *For more details, please refer to the PDF document or feel free to contact us.

• End Mills

Over 120 years of establishment, Gühring, which expands globally from Germany, has developed the 'G-Mold' carbide torus end mill 65T for molds.

GUHRING's lineup has been expanded with the addition of the 'G-Mold' torus end mill <65T>, specialized for mold processing! The hardness of applicable work materials can reach up to 65HRC. The corner R tolerance is ±0.01mm. Available in diameter sizes from Φ1.0 to Φ12.0. Lengths are offered in both regular and long options. *For more details, please refer to the PDF document or feel free to contact us.

• End Mills

Over 120 years of establishment, Gühring, which expands globally from Germany, has developed the 'G-Mold' carbide torus end mill 55T for molds.

GUHRING's end mill product line has been expanded with the addition of the 'G-Mold' torus end mill <55T>, specialized for mold processing! It is optimal for fine machining with a minimum diameter of Φ0.5. The hardness of the applicable workpiece material can go up to 55HRC. The corner R tolerance is ±0.01mm. We offer a wide variety of lengths from regular to long. *For more details, please refer to the PDF document or feel free to contact us.

• End Mills

Over 120 years of establishment, Gühring, which expands globally from Germany, has developed the 'G-Mold' carbide high-feed end mill 65HF for molds.

GUHRING's end mill product line has been expanded with the addition of the 'G-Mold' high feed end mill <65HF>, specialized for mold processing! It is optimal for high feed (maximum fz) rough machining (with low cutting depth ap). The hardness of applicable work materials can reach up to 65 HRC. Available in diameter sizes from Φ1.0 to Φ16.0. Lengths range from regular to extra long. *For more details, please refer to the PDF document or feel free to contact us.

• End Mills

Over 120 years of establishment, Gühring, which expands globally from Germany, has developed the 'G-Mold' ultra-hard high-precision finishing end mill μ65F for molds.

GUHRING's end mill product line has been expanded with the addition of the high-precision finishing end mill 'G-Mold' <μ65F>, specialized for mold processing! It is optimal for high-precision finishing. The hardness of the applicable workpiece material can be up to 65 HRC. Available lengths include regular and long (3xD cutting length). *For more details, please refer to the PDF document or feel free to contact us.

• End Mills

Gühring, which has been in business for over 120 years and operates globally from Germany, has developed the 'G-Mold' ultra-hard high-precision finishing end mill μ48F for molds.

GUHRING's end mill product line has been expanded with the addition of the high-precision finishing end mill 'G-Mold' <μ48F>, specialized for mold processing! It is optimal for high-precision finishing. The hardness of the applicable workpiece material can be up to 48 HRC. Available lengths include regular and long (3xD cutting length). *For more details, please refer to the PDF document or feel free to contact us.

• End Mills

Gühring, which has been in business for over 120 years and operates globally from Germany, has developed the 'G-Mold' carbide finishing end mill 65F for molds.

The GUHRING end mill product line has been expanded to include the 'G-Mold' finishing end mill <65F>, which is specialized for mold processing! It is designed for finishing operations with six cutting edges. The hardness of the applicable workpiece material can be up to 65 HRC. Both regular and extra-long lengths are available. *For more details, please refer to the PDF document or feel free to contact us.*

• End Mills

Gühring, which has been established for over 120 years and operates globally from Germany, has developed the 'G-Mold' carbide finishing radius end mill 65FR for molds.

GUHRING's end mill product line has been expanded to include the 'G-Mold' finishing radius end mill <65FR>, specifically designed for mold processing! It is a finishing tool with six cutting edges. The corner R tolerance is ±0.02. It can be used on workpieces with a hardness of up to 65 HRC. Length options include regular and extra long. *For more details, please refer to the PDF document or feel free to contact us.

• End Mills

Gühring, which has been in business for over 120 years and operates globally from Germany, has developed the 'G-Mold' carbide unequal lead end mill 65U for molds.

GUHRING's lineup has been expanded with the addition of the 'G-Mold' carbide unequal lead end mill <65U>, specialized for mold processing! It features a high-efficiency four-flute design with unequal leads. The hardness of the applicable workpiece material can reach up to 65 HRC. A wide range of machining methods is applicable, including groove processing up to HRC 65. *For more details, please refer to the PDF document or feel free to contact us.

• End Mills

Over 125 years of establishment, a German global manufacturer develops the ultra-hard micro drill 'InoxPro' for stainless steel.

The stainless steel processing expert 'InoxPro' has been added to the micro drill series, expanding the lineup. The cutting edge shape is optimized for stainless steel processing. It comes with a new coating, Perrox, using the HiPIMS method. There are four types of processing hole depths: 3xD, 6xD, 10xD, and 15xD. The type with oil holes is also ideal for deep hole processing. *For more details, please refer to the PDF document or feel free to contact us.

• drill

We would like to extend our heartfelt congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will showcase a variety of products, including new ones. We sincerely apologize for the inconvenience during your busy schedule, but we would like to invite you to attend this event. 【 Exhibition Name 】 27th INTERPHEX Week Tokyo https://www.interphex.jp/tokyo/ja-jp.html 【 Dates 】 July 9 (Wednesday) - 11 (Friday), 2025 10:00 AM - 5:00 PM 【 Venue 】 Tokyo Big Sight (3-11-1 Ariake, Koto-ku, Tokyo 135-0063)

We would like to extend our heartfelt congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will showcase a variety of products, including new ones. We sincerely invite you to visit us during this busy time. 【 Exhibition Name 】 Automotive Technology Exhibition 2025 YOKOHAMA https://aee.expo-info.jsae.or.jp/ja/yokohama/ (An "online exhibition" will also be held during and around the event period) 【 Dates 】 May 21 (Wednesday) - 23 (Friday), 2024 10:00 AM - 6:00 PM *On the final day, 9:00 AM - 4:00 PM (Online exhibition: May 14 (Wednesday) - June 4 (Wednesday)) 【 Venue 】 Pacifico Yokohama (1-1-1 Minatomirai, Nishi-ku, Yokohama, Kanagawa Prefecture) Our booth number: "Concourse 505"

Nakakin will be exhibiting at 'FOOMA JAPAN 2026 (International Food Industry Exhibition)' held at Tokyo Big Sight. This exhibition proposes "A rich future opened by food technology" through cutting-edge technology, products, and services in food machinery, amidst growing interest in "food safety and security." We aim to facilitate the exchange and dissemination of technology and information related to food machinery, equipment, and associated devices, contributing to the further development of the food industry. We sincerely look forward to your visit.

[Speaker] Academic Visitor, University of Strathclyde, UK Visiting Professor, Offshore Wind Research and Education Center, Kyushu University Senior Researcher, Institute for Sustainable Energy Policies (ISEP) Mr. Yo Yasuda [Lecture Topics] 1. International Trends in Decarbonization and Japan's Position (1) Risks of Fossil Fuel Dependence and Decarbonization as Risk Management (2) Discussions on Decarbonization and Renewable Energy in International Organizations (3) Discussions on Decarbonization and Renewable Energy in Japan (4) Discrepancies Between International and Domestic Discussions (The U.S. is not the world) 2. International Discussions on Large-Scale Introduction of Renewable Energy (1) Electrification and Sector Coupling (Why are EVs and Heat Pumps Advancing?) (2) Externalities and Benefits (Long-Term Perspective and Risk Management) (3) Flexibility (The notion that "renewable energy is unstable" is outdated) 3. Challenges and Solutions for Japan, Methodology for Information Gathering (1) Fake News and Scientific Methodology (2) Non-Scientific Narratives and Evidence-Based Policy Making (EBMP) (3) AI and Specialized Information Retrieval 4. Q&A / Business Card Exchange *Reference: "The Future of 90% Renewable Energy by 2050 - Scenarios and Scientific Basis for Achieving Decarbonization" by Yo Yasuda, Yamato Keikokusha (December 2024)

[Speaker] Akira Yamauchi, President and CEO of Intellectual Property Landscape Co., Ltd. Patent Attorney, AIPE Certified Senior Intellectual Property Analyst [Lecture Topics] 1. What is Physical AI? [1] Industrial Robots [2] Humanoids [3] Autonomous Vehicles as the main fields Overview of the population setting for the three fields and the key players in each field 2. [1] Industrial Robot Analysis 3. [2] Humanoid Analysis 4. [3] Autonomous Vehicle Analysis 5. Summary and Discussion of the Analysis Results for the Three Fields 6. Q&A Session