Special repair measures for IT equipment damaged by the Noto Peninsula earthquake in the 6th year of Reiwa.

The manufacturer support for Fujitsu products has expired, but I still want to use them! We can provide a solution with third-party support available nationwide from our self-operated maintenance base!

We provide third-party maintenance (EOSL maintenance) for Fujitsu products. Maintenance parts are procured from the reuse market, inspected and aged in-house, and managed at each location. Our company is a member of the International Association of Computer Service Companies (ASCDI) and sources components from reliable partners both domestically and internationally. Engineers with knowledge, experience, and a track record from major manufacturer-affiliated maintenance companies will provide support. ■ Self-operated maintenance locations: Tokyo, Osaka, Aichi, Fukuoka, Miyagi, Hokkaido, Ishikawa, Hiroshima, Kagawa ■ Main maintenance series: - PRIMERGY (Rack, Tower, Blade, Off-Computer, Storage) - PRIMEQUEST (Core IA Server) - SPARC Servers / SPARC Enterprise / PRIMEPOWER (UNIX Server) - ETERNUS (Storage, SAN Switch) We have over 700 contracted companies and a proven track record of maintaining more than 72,000 devices. The maintenance series is updated daily. *For more details, please refer to the PDF document or feel free to contact us.

• server

Trading company customer case: Uncertainty about the transition to the next system... alleviating such concerns.

The target equipment is the Hitachi rack servers HA8000/RS220AN1 and RS110AM1, which were released in 2014. The maintenance has already expired, and the transition to the next system is still undecided, so we have to continue operating without maintenance until then. In the case of "interim maintenance" (third-party maintenance), we procure the same equipment that the customer is using from domestic and international partner companies and stock it as dedicated maintenance parts at the nearest base. (In this case, it is managed at the Hokuriku Technical Center.) ■ Issues - Although we had prepared alternative servers in-house, they were different in specifications and models, which caused concerns. ■ Results - Since the entire set of equipment is stored, we can quickly power it on in the event of a failure, inspect the maintenance parts, and rush to the site.

• Other services

An example of a case where a SMART failure (SMART error) occurred, leading to a replacement response!

The reason for our engagement was that we received a contact regarding a Fujitsu server that had broken down after the manufacturer's maintenance had expired. Before reaching our company, it seems that several other companies had already declined to repair it, but through a referral from a company we were both associated with, they consulted with the Hokkaido Technical Center. Regarding the recent spot maintenance case for the NEC Express5800/R120e-1E server, it was reported that a SMART Failure (SMART error) was indicated by the hard disk's self-diagnostic function, and we proceeded with a replacement. [Case Overview] ■ Industry: Medical Institution ■ Location of the equipment under maintenance: Kitami City, Hokkaido ■ Manufacturer: NEC ■ Equipment: Express5800/R120e-1E *For more details, please refer to the PDF document or feel free to contact us.

• server

After our spot maintenance (per-call maintenance), we provide a six-month operational guarantee!

During a site survey for maintenance, we confirmed that there was an HDD error in the Toshiba IA server (PC server) MAGNIA 3500, and we received a request for replacement repair. Fortunately, we had the necessary parts in stock, so we quickly provided a quote and received the order. After scheduling, we visited two days later to perform the replacement, and the work, including rebuilding, was completed in just under an hour. To ensure safe operation in the future, we also established a maintenance contract for another device afterward. Depending on the model and installation location, we always strive to respond with a sense of urgency. If you notice any signs of failure, please feel free to contact Brave Computer. [Case Overview] ■Industry: Medical Institution ■Maintenance Target Installation Location: Nihonmatsu City, Fukushima Prefecture ■Manufacturer: Toshiba ■Target Device: MAGNIA 3500 *For more details, please refer to the PDF document or feel free to contact us.

• server

The manufacturer support for HPE products has expired, but I still want to use them! We can solve this with third-party support available nationwide from our self-operated support center!

We provide third-party maintenance (EOSL maintenance) for HPE products. Maintenance parts are procured from the reuse market, inspected and aged in-house, and managed at each location. Our company is a member of the Association of Service and Computer Dealers International (ASCDI) and sources components from reliable partners both domestically and internationally. ■ Main maintenance series: - ProLiant (Rack DL series / Blade BL series) - Integrity (Rack / Tower rx series / Blade BL series) - HP9000 (HP-UX servers) - 3PAR StoreServ (storage) - StorageWorks (storage) - StoreEasy (storage) - StoreOnce (storage) ■ Maintenance locations: Tokyo, Osaka, Aichi, Fukuoka, Miyagi, Hokkaido, Ishikawa, Hiroshima, Kagawa We have a track record of over 700 contracted companies and maintenance for more than 72,000 devices. The series we support is updated daily. *For more details, please refer to the PDF document or feel free to contact us.

• server

The manufacturer support for the network equipment has expired, but I still want to use it! We can solve this with third-party support available nationwide from our self-operated support center!

We provide third-party maintenance for network equipment (EOSL maintenance). Maintenance parts are procured from the reuse market, inspected and aged in-house, and managed at each location. Our company is a member of the Association of Service and Computer Dealers International (ASCDI) and sources components from reliable partners both domestically and internationally. Engineers with knowledge, experience, and a track record from major manufacturer-affiliated maintenance companies will provide support. ■ Self-operated maintenance locations: Tokyo, Osaka, Aichi, Fukuoka, Miyagi, Hokkaido, Ishikawa, Hiroshima, Kagawa ■ Main maintenance series - Cisco - Juniper - FORTINET - Brocade - A10 - Allied Telesis - Extreme - Aruba, etc. We have a track record of maintaining over 700 companies, including government agencies and large enterprises, with more than 72,000 devices. The maintenance series is updated daily. Please feel free to consult us regarding maintenance for hardware such as servers, storage, and network equipment.

• server

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

On September 11, 2025, AC Tasarim, a cable blade manufacturer, and our company signed a sales agency agreement for Japan. This was also announced in the company's press release and on social media. Founded in Turkey in 2003, AC Tasarim manufactures flexible EMI cable shields (copper braid), polyester braid, meta-aramid braid (Nomex cable sleeves), flat copper braid busbars/ground braids, all AA59569-coded copper braids, and released AeroBraid in 2025, the world's lightest EMI braid. All manufactured copper braids are certified to military standards. AC Tasarim products hold key certifications including VDE/VG certification, German Federal Armed Forces certification, NATO NSN coding, AS9100 quality certification, and JOSCAR certification. Cable braids and EMI shielding products, essential for wire harnesses in the aerospace and defense industries, are becoming increasingly difficult to source as demand rises. TC Tasarim products are stocked by manufacturers and distributors to ensure quick response times.

Starting from September 22, 2025 (Monday), we will begin accepting orders for five new lineups tailored to various applications in the "N-SELECT" series of transport vehicles. In this new development, we will introduce the following five models that maintain the basic performance of the traditional N-SELECT while addressing more specialized needs: SC (Super Carrier) - Based on the traditional N-SELECT, this model is specialized for transporting immobile and accident vehicles. It is ideal for the automotive maintenance and towing industry. RC (Racing Carrier) - Designed with a gentle loading and unloading angle, this model is perfect for transporting sports cars and lowered vehicles. TP (Transporter) - A standard model optimized for the transportation of general passenger vehicles, suitable for a wide range of industries. ONE (Single Vehicle Loading Model) - A simple and efficient design dedicated to loading one vehicle. Recommended for small-scale transport and individual entrepreneurs. RS (Rescue) - A single vehicle loading model equipped with a crane, enhancing its capability to respond in accident scenes and tight spaces. With these lineups, N-SELECT evolves into a product group that meets a wider variety of on-site needs. We will continue to promote product development that reflects the voices from the field as the "preferred transport vehicle."