Three types of magnetic bead separators for 96-well plates are now available! We also offer manual, semi-automatic, and automatic PCR washers.

A wide variety of magnetic bead separators for microtubes, including single and four-channel options, as well as round-bottom, flat-bottom, and PCR plates. We are currently running a one-week demo campaign.

In ELISA and bio experiments, we efficiently capture and separate magnetic beads in microtubes and microplates. We offer a variety of inexpensive and economical magnetic bead separators. We have different types available, including MY96, MF96, and MP96 for round-bottom, flat-bottom, and PCR microplates, as well as MY4S for four microtubes and MY1S for a single microtube. The MY96 features a removable magnet, allowing you to replace only the rusted magnets if some become rusty, thus maintaining its usability. We also offer demo units for loan, so please feel free to contact us. Additionally, for cleaning magnetic beads, please request our PEEK-made MultiWasher20 with a nozzle diameter of 1.5mm (the narrow 1.5mmφ nozzle minimizes contact with the magnetic beads). For microtubes, a luer nozzle with an outer diameter of 1.5mmφ is beneficial for cleaning magnetic beads, so we encourage you to give it a try.

• Concentration Equipment
• Other laboratory equipment and containers

We have three types of magnetic bead separators for round-bottom, flat-bottom, and PCR microplates available. We are currently running a one-week rental demo campaign.

This is a lineup of magnetic bead separators specifically designed for round-bottom, flat-bottom, and PCR microplates. Our magnetic bead separators are ideal for separating magnetic beads used in applications such as ELISA. We offer three types of separators that correspond to the three types of plates: round-bottom, flat-bottom, and PCR. You can choose a magnetic bead separator that matches the shape of the microplate using magnetic beads. The magnetic force is strong, and the price is economical.

• Separation device
• Other laboratory equipment and containers
• Analytical Equipment and Devices

We have prepared three types of 8-channel washers for ELISA: manual, semi-automatic, and fully automatic. Please choose according to your needs. Videos are currently being streamed on our website!

We have developed three types of affordable microplate washing devices necessary for immunoassays in-house. They include a fully automatic type with easy operation, a semi-automatic type that uses manual valve switching for suction and discharge, and a nozzle type that controls the discharge of washing liquid by gravity. For low-budget options, we also offer a product with just the nozzle. There is also a nozzle specifically for gravity discharge (Immuno Nozzle 8). The nozzle is made of PEEK, so there is no concern about adverse effects on the assay. The semi-automatic and fully automatic models properly store waste liquid in waste bottles, making them environmentally friendly washers. The nozzle is priced under 100,000 yen, the semi-automatic washer (including pump) is 160,000 yen, and the fully automatic washer (including two pumps) is 250,000 yen, making them economical given their high functionality. Please choose according to your budget. We are also continuing our popular one-week free rental campaign, so feel free to reach out to us.

• Other physicochemical equipment
• Other cleaning machines
• Analytical Equipment and Devices

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

[To the owners of parking lots and parking lot construction companies] "I'm worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those facing sidewalks or roadways are particularly prone to dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surroundings with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Vehicle Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed without causing any thermal impact on the base material. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

Takagi Seiko Co., Ltd. will exhibit at the "Automotive Technology Exhibition 2026 YOKOHAMA." Exhibition Name: Automotive Technology Exhibition 2026 YOKOHAMA Event Period: - In-person exhibition: May 27 (Wed) - May 29 (Fri), 2026 - Online exhibition: May 19 (Wed) - June 9 (Wed), 2026 Available on the online exhibition website. Venue: Pacifico Yokohama Takagi Seiko's booth is located in the North Hall, N18. We sincerely look forward to your visit. - Pre-registration (application for a visitor badge) is required for entry to the exhibition. - For more details about the exhibition, please check https://aee.expo-info.jsae.or.jp/ja/yokohama/. You can also apply for a visitor badge at the link.