January 24-26, 38th Neppon Japan RFID-related Exhibits Introduction. We invite you to see the demonstrations and share your feedback with us.

Thank you for visiting the 38th Internepcon Japan Electronics Manufacturing and Assembly Exhibition.

You can view information about the products exhibited on that day here. 〇 Industrial Equipment Division - Flying Probe Tester APT-1600FD-A (Assembly Board Inspection Device) Unmanned continuous inspection linked with front and rear devices OPC-UA (OPC Unified Architecture) Linked with MES (Manufacturing Execution System) Real-time information collection and management of operational status 〇 RF Division / Solutions Division - RFID Outgoing Management System - RFID UHF Band Continuous Monitoring System - Work performance collection using RFID / Semiconductor IC Tag Reading - RFID × IoT Data Device "RFID Performance Collection System" - Easy replacement from barcode HID reader and key input tool

• Circuit Board Inspection Equipment

Exhibiting at Nepcon 2024 from January 24! We contribute to solving challenges in the manufacturing field through ultra-fast inspection of mounted boards and system improvements utilizing RFID.

We will be exhibiting new products and technologies at the 38th NePCON Japan! 〇Industrial Equipment Division APT-1600FD Dual-Side Flying Probe Tester A flagship model that allows simultaneous inspection of both sides by placing probe heads on the top and bottom of the board. Using OPC-UA (OPC Unified Architecture), our unique software links with your MES (Manufacturing Execution System) to collect and manage operational information in real-time (first-time exhibit). 〇RF Division RFID × IoT Data Service "RFID Work Performance Collection System" Data from IC tags can be sent to the cloud via MQTT just by placing them, enabling data collection. The collected data is visualized through a dashboard function, achieving "visualization of work performance." Since the reader-writer is autonomous, there is no need for a control PC or software development for both HF and UHF bands. Record management of items taken out with just a touch "Item Management System" Utilizing IC tags to reliably record the history of items taken out and returned, preventing omissions and errors in ledger entries, and supporting early detection of forgotten returns or losses. Efficient inventory management is possible through bulk reading with RFID handheld devices. Many more exhibits are planned.

• Circuit Board Inspection Equipment

Real-time understanding of changes in project status! From now on, simply placing it will complete the input of achievements.

We introduce the "RFID Utilization Process Progress and Achievement Collection System," which automatically collects achievement information simply by placing or removing various cards on terminals set up in the workspace. Up to 20 cards can be stacked and read simultaneously, and when leaving the workspace, you only need to remove the cards. This allows for real-time understanding of changes in process status. Additionally, the RFID reader/writer with an LCD touch panel suitable for IoT edge devices operates in a standalone mode, eliminating the need for a PC installation. It uses a web server function to directly control the reader/writer from a browser. 【Features】 ■ Up to 20 cards can be stacked and read simultaneously ■ Only need to remove the cards when leaving the workspace ■ Flexible usage - Convenient tray type or slim stand type that takes up little space - The terminal's LCD screen can display errors and allow for direct input of achievements *For more details, please refer to the PDF document or feel free to contact us.

• IC tag reader/writer

We are releasing the UHF version of the HF shelf antenna, which has a sales record of over 2,000 units!

This is a shelf antenna system operating in the UHF band (920MHz). It allows for bulk reading of books and equipment located on shelves. By placing items with RF tags on the shelf antenna, it can be utilized for location management, inventory tracking, and recording check-out and return histories. *UHF band RFID: Frequency 920MHz, International standard ISO/IEC18000-63, compliant with GS1 EPCglobal Gen2. Features: 1. Compliant with UHF band RFID ISO/IEC 18000-63 and GS1 EPCglobal Gen2. 2. Type of specific low-power radio station that does not require a license application (*output below 250mW). 3. One reader/writer can control up to 8 shelf antennas. 4. Location management for each shelf is possible. 5. Reduces the spread of radio waves around the antenna to prevent misreads. 6. Installation on metal shelves is also acceptable. 7. Middleware for constant monitoring is available (sold separately). (*Direct control from the upper system without using middleware is also possible). 8. The middleware includes a dashboard function bundled as a sample application.

• IC tag reader/writer

Functions specialized for lending and returning operations are templated. IC tags are attached to managed items, enabling lending, returning, and inventory checks using RFID.

This is a management system for tracking items using IC tags. It reliably records the history of items taken out and returned, preventing omissions and errors in ledger entries, while also supporting the early detection of forgotten returns and losses. Additionally, it enables efficient inventory checks through bulk reading with RFID handheld devices. In traditional item management operations, the following issues often arise: ♦ Handwriting or Excel input into the ledger The process of recording in the ledger or entering data into Excel during item check-out and return is cumbersome, leading to discrepancies due to entry errors. ♦ Individual confirmation during inventory checks It is necessary to take items out one by one from boxes or shelves for verification, which consumes a significant amount of time for inventory tasks. ♦ Management through ledgers Due to management via paper or Excel ledgers, it is difficult to detect unreturned items or losses early and respond quickly. This system addresses these challenges.

• IC tag

We have created a video explaining tool management using the RFID asset management system from Takaya's Solution Division!

We will solve the challenges of tool management, namely "When?", "Who?", and "Which tool?" using RFID. 【Overview of the Outgoing Management System】 - Attach IC tags to managed items to enable outgoing, returning, and inventory management using RFID. - Ensure accurate recording of outgoing and returning history and enable efficient inventory management using handheld devices.

• IC tag reader/writer

The low-voltage fuse "SBFC-MS2" is a slow blow fuse that can withstand temporary overcurrents and only blows under continuous overcurrents. It is particularly effective for devices in automobiles where the current temporarily spikes. For example, it protects power window motors, which may blow regular fuses due to the large current that flows temporarily during startup. It is recommended for those facing circuit protection challenges in the automotive and construction machinery industries, as well as for low-voltage fuses (below DC70V).

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

In recent times, there has been a growing interest in infection control measures and facility hygiene management. Our company offers non-contact sensor products that are recommended for commercial facilities, food factories, and nursing and caregiving facilities. 【Sensors for Automatic Doors】 ● Light Touch Sensor HA-T401 … When you wave your hand in front of the automatic door, the sensor detects the movement and opens or closes the door. It is recommended for making doors that use touch switches non-contact. ● Hand Wave Sensor PF-R5, PF-U2, DHS-1 … Opens and closes the automatic door by waving your hand in front of the sensor. ● Foot Switch PF-01S/01D/03S/05 … Opens and closes the automatic door by placing your foot in the opening. 【Access Control System】 ● Face Recognition + Unmanned Temperature Measurement DS Series … Capable of detecting mask-wearing and measuring body temperature simultaneously with face recognition. ● Automatic Disinfectant Spray Dispenser PHW-03B … Automatically sprays disinfectant when you wave your hand in front of the sensor. 【Nursing and Care Sensors】 ● Infrared Bed Exit Sensor "Just Place It Pole-kun" … This bed exit sensor is installed next to the bed and alerts via nurse call when the subject enters the detection range. ◎ For more details, please download the catalog or contact us.

Hotron, which manufactures and sells sensors, provides bed exit sensors for hospitals, nursing, and care facilities. Hotron offers easy-to-understand video guidance on how to use the bed exit sensors wirelessly and how to set up device connections! ▼ Video Manual (YouTube) https://www.youtube.com/playlist?list=PLNVA4mTrZDqtJa6MfFRZQxwtfCSnAfxVy 【Bed Exit Sensors】 ○ Non-contact infrared sensor, simply place it - Pole-kun HB-H1 ○ Mat sensor, foldable thin mat - Mat-kun HB-UST ○ Body movement call - Ugo-kun HB-TV3 ○ Body movement call for wheelchairs - Ayumi-chan HB-WTV3 【Options】 ○ Nurse call linked wireless set - Wireless set (transmitter/receiver) HB-RS/HB-RJ ◎ For more information about the products, please contact us or download the catalog.

● To determine the sealing and waterproofing of sealed products based on pressure changes, it is not necessary to conduct tests that involve spraying water on the product or immersing it in water. ● Once the product is placed in a dedicated fixture within the inspection device, waterproofing can be quantitatively confirmed through automatic measurement. ● The target product size is W 300 × D 210 × H 100 mm or smaller. ● The target products include automotive cameras, smartphones, ECUs, small motors, and other packaging containers, and are effective for any products that require confirmation of sealing, waterproofing, and airtightness. ● For product specifications and details, please contact us.